Halit Büyüksakalli
Research Subjects
Halit Büyüksakalli has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Abdullah Emin Akay
Bursa Technical University
2 shared publications - İnAnç Taş
Bursa Technical University
1 shared publication İnanç Taş
Bursa Teknik Üniversitesi
1 shared publication
Latest Publications
- Open Access
- 25 December 2025
- Published by European Journal of Forest Engineering in European Journal of Forest Engineering
- Vol. 11 (2) , 184-191
Assessing Rut Depth Formation in a Skidding Operation Using UAV Photogrammetry
Mechanical harvesting equipment used in forestry operations increases productivity; however, they may cause significant physical impacts on the soil. Among the most noticeable of these effects are wheel ruts caused by logging vehicles. Such effects can disrupt the physical structure of the soil, increase the risk of erosion, and damage forest ecosystems. In this study, wheel rut depths formed during ground-based skidding operations were analyzed comparatively using both a manual measurement method and a 3D image-based method implemented via Unmanned Aerial Vehicles (UAVs). The fieldwork was conducted during a skidding operation in the Dağtekke Forest Enterprise Chief in the city of İzmir. Manual measurements were performed using a ruler and a lath along skidding trails. For image-based method, aerial images of the study area were captured using UAV, and then used to generate Digital Surface Model (DSM). The results obtained from both methods were compared using correlation analysis and paired sample t-tests. The findings showed a high correlation between manual method and UAV-assisted method, indicating that UAV photogrammetry offers a fast and reliable alternative for rut depth monitoring. The UAV-derived measurements of rut depth showed a high level of accuracy, achieving a Mean Absolute Percentage Error (MAPE) of 16.86%. This study presents a novel application of UAV-based method for high-resolution, remote measurement of rut depth. It offers a cost-effective alternative to traditional methods while providing valuable insights into assessing the environmental impacts of mechanical equipment in forestry operations.
- 25 December 2025
- Published by European Journal of Forest Engineering in European Journal of Forest Engineering
- Vol. 11 (2) , 184-191
Open AccessAssessing Rut Depth Formation in a Skidding Operation Using UAV Photogrammetry
Mechanical harvesting equipment used in forestry operations increases productivity; however, they may cause significant physical impacts on the soil. Among the most noticeable of these effects are wheel ruts caused by logging vehicles. Such effects can disrupt the physical structure of the soil, increase the risk of erosion, and damage forest ecosystems. In this study, wheel rut depths formed during ground-based skidding operations were analyzed comparatively using both a manual measurement method and a 3D image-based method implemented via Unmanned Aerial Vehicles (UAVs). The fieldwork was conducted during a skidding operation in the Dağtekke Forest Enterprise Chief in the city of İzmir. Manual measurements were performed using a ruler and a lath along skidding trails. For image-based method, aerial images of the study area were captured using UAV, and then used to generate Digital Surface Model (DSM). The results obtained from both methods were compared using correlation analysis and paired sample t-tests. The findings showed a high correlation between manual method and UAV-assisted method, indicating that UAV photogrammetry offers a fast and reliable alternative for rut depth monitoring. The UAV-derived measurements of rut depth showed a high level of accuracy, achieving a Mean Absolute Percentage Error (MAPE) of 16.86%. This study presents a novel application of UAV-based method for high-resolution, remote measurement of rut depth. It offers a cost-effective alternative to traditional methods while providing valuable insights into assessing the environmental impacts of mechanical equipment in forestry operations.
- Open Access
- 26 December 2023
- Published by European Journal of Forest Engineering in European Journal of Forest Engineering
- Vol. 9 (2) , 57-63
Productivity Analysis of Mid-Size Cable Yarding Operation based on UAV-captured Video Sequences
Cable yarding is one of the most preferred timber extraction methods in steep and mountainous terrain conditions. In recent years in Turkiye, mid-size cable yarders have begun to be used frequently in steep forest areas where intensive forestry is carried out. In order to make more effective use of cable yarders and achieve maximum productivity, timber extraction operations must be planned most appropriately and implemented in the field accordingly. The productivity of mechanized equipment used in harvesting operations is mainly determined by using time study analysis. In traditional methods, time measurements are carried out by observing the work stages with time recording devices (stopwatches) in the area where the machine operates. Since timber extraction by using a cable yarder occur in steep and rugged terrain conditions, difficulties may be encountered in applying time analysis in the field. In this study, it was aimed to obtain high-resolution digital video images of the activities of cable yarding operation with an Unmanned Aerial Vehicle (UAV) and to calculate productivity through time study analysis on these images. For the study, the Tajfun MOZ 500 GR model mid-size cable yarder was evaluated during a timber extraction operation in Köyceğiz Forest Enterprise Chief (FEC), located in Muğla City, Turkiye. Besides, statistical analysis was performed to estimate the effects of factors such as average product length, product diameter, lateral yarding distance, number of pieces, and total product volume per turn on the productivity of the cable yarder. The results indicated that UAV video images can be an effective alternative method to conduct time study analysis and productivity estimations. It was found that the productivity of the mid-size cable yarder was 11.76 m3/hour. During the operation, the pulling mainline to the product and choker setting were the most time-consuming work stages, followed by the time-loaded carriage reaching the landing. The statistical analysis indicated a significant relationship (p<0.001) between product length, product diameter, total volume and productivity of the cable yarder. The results showed that there was a negative relationship between lateral yarding distance and productivity. The regression model regarding the productivity of the cable yarder and the independent variables was also significant.
- 26 December 2023
- Published by European Journal of Forest Engineering in European Journal of Forest Engineering
- Vol. 9 (2) , 57-63
Open AccessProductivity Analysis of Mid-Size Cable Yarding Operation based on UAV-captured Video Sequences
Cable yarding is one of the most preferred timber extraction methods in steep and mountainous terrain conditions. In recent years in Turkiye, mid-size cable yarders have begun to be used frequently in steep forest areas where intensive forestry is carried out. In order to make more effective use of cable yarders and achieve maximum productivity, timber extraction operations must be planned most appropriately and implemented in the field accordingly. The productivity of mechanized equipment used in harvesting operations is mainly determined by using time study analysis. In traditional methods, time measurements are carried out by observing the work stages with time recording devices (stopwatches) in the area where the machine operates. Since timber extraction by using a cable yarder occur in steep and rugged terrain conditions, difficulties may be encountered in applying time analysis in the field. In this study, it was aimed to obtain high-resolution digital video images of the activities of cable yarding operation with an Unmanned Aerial Vehicle (UAV) and to calculate productivity through time study analysis on these images. For the study, the Tajfun MOZ 500 GR model mid-size cable yarder was evaluated during a timber extraction operation in Köyceğiz Forest Enterprise Chief (FEC), located in Muğla City, Turkiye. Besides, statistical analysis was performed to estimate the effects of factors such as average product length, product diameter, lateral yarding distance, number of pieces, and total product volume per turn on the productivity of the cable yarder. The results indicated that UAV video images can be an effective alternative method to conduct time study analysis and productivity estimations. It was found that the productivity of the mid-size cable yarder was 11.76 m3/hour. During the operation, the pulling mainline to the product and choker setting were the most time-consuming work stages, followed by the time-loaded carriage reaching the landing. The statistical analysis indicated a significant relationship (p<0.001) between product length, product diameter, total volume and productivity of the cable yarder. The results showed that there was a negative relationship between lateral yarding distance and productivity. The regression model regarding the productivity of the cable yarder and the independent variables was also significant.
- Open Access
- 30 June 2021
- Published by European Journal of Forest Engineering in European Journal of Forest Engineering
- Vol. 7 (1) , 26-31
Noise Reduction Provided by Trees in an Urban University Campus
In urban universities, there are various noise sources such as roads, railways, construction activities that disturb staffs and students and cause undesirable environment for higher education. In this study, noise reduction effects of trees were investigated in the urban campus of Bursa Technical University (BTU) located in Yıldırım province of Bursa, Turkey. The campus was surrounded by a major inter-city road with a heavy traffic at the north and there is a large hospital at the south. There is a tree fence along the north boarder and there are groups of trees particularly at the north. In field study, the peak noise level data were collected for 5 minutes in two periods (Morning: 09:00-11:00 and Afternoon: 14:00-16:00) from total of 64 points which were homogenously distributed in the campus. Additional noise data were also collected from outside and inside of tree fence along the north border and from midpoint of each tree group. The coordinates of the noise data points were recorded by a GPS and a noise level layer was generated in ArcGIS 10.4.1. Then, noise map of campus was generated using kriging function based on spatial interpolation of noise data. The results indicated that the average peak noise level was 65.6 dBA in the morning period and 66.1 dBA in the afternon period. The maximum peak noise level of 103.6 dBA was reached in the morning period, while maximum peak noise level was 101.6 dBA in the afternoon period. The average peak noise level within the tree groups were 53.7 dBA (maximum 59.3 dBA) and 54.1 dBA (maximum 61.3 dbA) in two periods, respectively. It was also found that tree fences reduced the noise level by 24.9 dBA and 26.3 dBA in two periods, respectively. The results revealed that trees within urban campus are important to reduce noise effect.
- 30 June 2021
- Published by European Journal of Forest Engineering in European Journal of Forest Engineering
- Vol. 7 (1) , 26-31
Open AccessNoise Reduction Provided by Trees in an Urban University Campus
In urban universities, there are various noise sources such as roads, railways, construction activities that disturb staffs and students and cause undesirable environment for higher education. In this study, noise reduction effects of trees were investigated in the urban campus of Bursa Technical University (BTU) located in Yıldırım province of Bursa, Turkey. The campus was surrounded by a major inter-city road with a heavy traffic at the north and there is a large hospital at the south. There is a tree fence along the north boarder and there are groups of trees particularly at the north. In field study, the peak noise level data were collected for 5 minutes in two periods (Morning: 09:00-11:00 and Afternoon: 14:00-16:00) from total of 64 points which were homogenously distributed in the campus. Additional noise data were also collected from outside and inside of tree fence along the north border and from midpoint of each tree group. The coordinates of the noise data points were recorded by a GPS and a noise level layer was generated in ArcGIS 10.4.1. Then, noise map of campus was generated using kriging function based on spatial interpolation of noise data. The results indicated that the average peak noise level was 65.6 dBA in the morning period and 66.1 dBA in the afternon period. The maximum peak noise level of 103.6 dBA was reached in the morning period, while maximum peak noise level was 101.6 dBA in the afternoon period. The average peak noise level within the tree groups were 53.7 dBA (maximum 59.3 dBA) and 54.1 dBA (maximum 61.3 dbA) in two periods, respectively. It was also found that tree fences reduced the noise level by 24.9 dBA and 26.3 dBA in two periods, respectively. The results revealed that trees within urban campus are important to reduce noise effect.