Mehmet Zengin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mehmet Zengin has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Fatma Gökmen Yılmaz
Department of Soil Science and Plant Nutrition, Faculty of Agriculture, Selcuk University, Konya, Turkey
2 shared publications - Fırat Uzun
Faculty of Agriculture, Department of Soil Science and Plant Nutrition, Selcuk University, Konya, Türkiye
2 shared publications Hakan Ertiftik
Doger Chemistry-Etkin Agriculture Ltd. Co., Konya, Turkey
2 shared publications- Mahmoud Nazzal
Department of Soil Science and Plant Nutrition, Faculty of Agriculture, Selcuk University, Konya 42150, Türkiye
2 shared publications - Sait Gezgin
Department of Soil Science and Plant Nutrition, Faculty of Agriculture, Selçuk University, Konya 42130, Türkiye
2 shared publications Aynur Özbahçe
Institute of Konya Soil and Water Sources Research
1 shared publication
Latest Publications
- Open Access
- 29 January 2025
- Published by Tekirdag Ziraat Fakultesi Dergisi in Tekirdağ Ziraat Fakültesi Dergisi
- Vol. 22 (1) , 134-150
Effects of Different Nitrogenous Fertilizers and Potassium Doses on Yield, Yield Components, and Fruit Quality of Tomato Grown in Alkaline and Acidic Soils
Different nitrogen fertilizers and potassium applications have an important impact on the yield and yield components and fruit-quality parameters of tomatoes in both alkaline and acidic reaction soils. This study investigated the effects of different nitrogenous fertilizers and potassium doses on the yield, yield components, and fruit quality of tomatoes grown on alkaline and acidic soils. The experiment was carried out in the research greenhouse of the Agriculture Faculty, at Selcuk University. It was performed by using two different soil types, three nitrogen fertilizers [ammonium sulfate (AS), ammonium sulfate with inhibitor (AS+inh.), and calcium nitrate (CaNit)], and three different concentrations of potassium sulfate (0, 240, and 480 mg K2O kg-1). We conducted the study by using a randomized experimental plot design with four replications. According to the research results, the highest fruit yield in alkaline soil was 'inh. AS and 480 mg K2O kg-1', while the highest fruit yield in acid soils was obtained with 'calcium nitrate and 240 mg K2O kg-1'. Furthermore, different nitrogen sources and potassium doses significantly affected tomato yield components such as stem diameter, plant height, number of fruits per plant, fruit weight, fruit diameter, fruit hardness, fruit pH, and Brix values. According to the results of the completed soil analysis, the applications demonstrated the importance of accurate and balanced fertilization for high-yield and quality tomato production in different soils. In conclusion, this study highlights the importance of selecting appropriate nitrogen fertilizers and potassium doses to increase tomato yield and yield components in alkaline and acidic soils. It provides valuable insights for tomato farmers and researchers seeking to improve tomato cultivation techniques in different soil conditions.
- 29 January 2025
- Published by Tekirdag Ziraat Fakultesi Dergisi in Tekirdağ Ziraat Fakültesi Dergisi
- Vol. 22 (1) , 134-150
Open AccessEffects of Different Nitrogenous Fertilizers and Potassium Doses on Yield, Yield Components, and Fruit Quality of Tomato Grown in Alkaline and Acidic Soils
Different nitrogen fertilizers and potassium applications have an important impact on the yield and yield components and fruit-quality parameters of tomatoes in both alkaline and acidic reaction soils. This study investigated the effects of different nitrogenous fertilizers and potassium doses on the yield, yield components, and fruit quality of tomatoes grown on alkaline and acidic soils. The experiment was carried out in the research greenhouse of the Agriculture Faculty, at Selcuk University. It was performed by using two different soil types, three nitrogen fertilizers [ammonium sulfate (AS), ammonium sulfate with inhibitor (AS+inh.), and calcium nitrate (CaNit)], and three different concentrations of potassium sulfate (0, 240, and 480 mg K2O kg-1). We conducted the study by using a randomized experimental plot design with four replications. According to the research results, the highest fruit yield in alkaline soil was 'inh. AS and 480 mg K2O kg-1', while the highest fruit yield in acid soils was obtained with 'calcium nitrate and 240 mg K2O kg-1'. Furthermore, different nitrogen sources and potassium doses significantly affected tomato yield components such as stem diameter, plant height, number of fruits per plant, fruit weight, fruit diameter, fruit hardness, fruit pH, and Brix values. According to the results of the completed soil analysis, the applications demonstrated the importance of accurate and balanced fertilization for high-yield and quality tomato production in different soils. In conclusion, this study highlights the importance of selecting appropriate nitrogen fertilizers and potassium doses to increase tomato yield and yield components in alkaline and acidic soils. It provides valuable insights for tomato farmers and researchers seeking to improve tomato cultivation techniques in different soil conditions.
- 8 September 2024
- Published by Taylor & Francis in Journal of Plant Nutrition
- Vol. 48 (2) , 237-250
Effects of algae extract application with different phosphorus sources on some yield components of beans
- 8 September 2024
- Published by Taylor & Francis in Journal of Plant Nutrition
- Vol. 48 (2) , 237-250
Effects of algae extract application with different phosphorus sources on some yield components of beans
- 27 May 2020
- Published by Tekirdag Ziraat Fakultesi Dergisi in Tekirdağ Ziraat Fakültesi Dergisi
- Vol. 17 (2) , 149-161
Artan Dozlarda Bakır Sülfat ve Azot Uygulamalarının Ekmeklik Buğdayda Verim ile Kök ve Kök Boğazı Çürüklüğü Hastalığına Etkileri
Bu çalışma, artan dozlarda bakır sülfat (BS; CuSO4.5H2O; %35 Cu) ve azot uygulamalarının Quality çeşidi ekmeklik buğdayda verim ve verim unsurları ile kök ve kök boğazı çürüklüğü hastalığına (KKBÇH) etkilerini tespit etmek amacıyla 2016-2017 üretim sezonunda Konya’nın Sarayönü İlçesi’nin Değirmenli Mahallesi’nde 0 ada 307 parsel numaralı bir çiftçi tarlasında yağmurlama sulamalı koşullarda yapılmıştır. Çalışmada 3 blok ve her blokta 24 parsel olmak üzere toplam 72 parsel oluşturulmuştur. Bloklara 10, 15 ve 20 kg N da-1 dozları uygulanmıştır. Ayrıca her blokta kendi içinde 4 tekerrürlü olarak 0, 0.5, 1, 2, 4 ve 6 kg BS da-1 dozları kullanılmıştır. Araştırma sonuçlarına göre, en yüksek buğday verimi (405 kg da-1) ‘15 kg N da-1 + 4 kg BS da-1’ uygulamasından alınmıştır. Ayrıca 10 kg N da-1 bloğunda 2 kg BS da-1 dozu ve üzeri dozlarda, 15 kg N da-1 ve 20 kg N da-1 bloklarında ise 4 kg BS da-1 dozu ve üzerindeki dozlarda BS uygulanan parsellerde KKBÇH’nın oluşmadığı belirlenmiştir. Uygulanan N dozlarının buğdayda verim ve verim unsurlarına etkilerine bakıldığında, en yüksek verim ve verim unsurları değerleri 15 kg N da-1 uygulamasından elde edilmiştir. Bu yüzden benzer koşullardaki buğday yetiştiriciliğinde 15 kg N da-1 ve 4 kg BS da-1 dozlarının kullanılması önerilebilir.
- 27 May 2020
- Published by Tekirdag Ziraat Fakultesi Dergisi in Tekirdağ Ziraat Fakültesi Dergisi
- Vol. 17 (2) , 149-161
Artan Dozlarda Bakır Sülfat ve Azot Uygulamalarının Ekmeklik Buğdayda Verim ile Kök ve Kök Boğazı Çürüklüğü Hastalığına Etkileri
Bu çalışma, artan dozlarda bakır sülfat (BS; CuSO4.5H2O; %35 Cu) ve azot uygulamalarının Quality çeşidi ekmeklik buğdayda verim ve verim unsurları ile kök ve kök boğazı çürüklüğü hastalığına (KKBÇH) etkilerini tespit etmek amacıyla 2016-2017 üretim sezonunda Konya’nın Sarayönü İlçesi’nin Değirmenli Mahallesi’nde 0 ada 307 parsel numaralı bir çiftçi tarlasında yağmurlama sulamalı koşullarda yapılmıştır. Çalışmada 3 blok ve her blokta 24 parsel olmak üzere toplam 72 parsel oluşturulmuştur. Bloklara 10, 15 ve 20 kg N da-1 dozları uygulanmıştır. Ayrıca her blokta kendi içinde 4 tekerrürlü olarak 0, 0.5, 1, 2, 4 ve 6 kg BS da-1 dozları kullanılmıştır. Araştırma sonuçlarına göre, en yüksek buğday verimi (405 kg da-1) ‘15 kg N da-1 + 4 kg BS da-1’ uygulamasından alınmıştır. Ayrıca 10 kg N da-1 bloğunda 2 kg BS da-1 dozu ve üzeri dozlarda, 15 kg N da-1 ve 20 kg N da-1 bloklarında ise 4 kg BS da-1 dozu ve üzerindeki dozlarda BS uygulanan parsellerde KKBÇH’nın oluşmadığı belirlenmiştir. Uygulanan N dozlarının buğdayda verim ve verim unsurlarına etkilerine bakıldığında, en yüksek verim ve verim unsurları değerleri 15 kg N da-1 uygulamasından elde edilmiştir. Bu yüzden benzer koşullardaki buğday yetiştiriciliğinde 15 kg N da-1 ve 4 kg BS da-1 dozlarının kullanılması önerilebilir.
- 1 January 2020
- Published by Tekirdag Ziraat Fakultesi Dergisi in Tekirdağ Ziraat Fakültesi Dergisi
- Vol. 17 (2) , 180-190
EFFECTS OF POTASSIUM AND ZINC FERTILIZATION ON THE YIELD AND YIELD COMPONENTS OF ARTICHOKE
This study was carried out to determine the effects of potassium (0, 60, 120 and 180 kg K2O ha(-1); K2SO4; 50% K2O) and zinc (0 and 30 kg ZnSO4 center dot 7H(2)O ha(-1); ZS; 22% Zn) applied on plant height, main head weight, numbers of head, concentrations of potassium and zinc in leaves and yield of early artichoke variety in Turkmen Village trial area of Agricultural Research Institute of Turkish Republic of Northern Cyprus during 2018-2019 artichoke growing period. According to the results, plant height increased 6.64% (60 kg K2O ha(-1) + 30 kg ZS ha(-1); 90.8 cm) compared to the control (85.3 cm) and 19.9% (120 kg K2O ha(-1) + 30 kg ZS ha(-1); 90.8 cm). Although the main head weight of the plant and the number of head per plant increased depending on the applications, an increasing was determined compared to the control. While the potassium concentrations of leaves increased between 5% and 65% compared to the control (0.44%), zinc concentrations increased by 9% compared to the control with only ZS application. The highest yield (89.720 kg ha(-1)) was obtained by '180 kg K2O ha(-1) + 30 kg ZS ha(-1)' treatment. With this application, the yield increased by 40.9% compared to the control. If the artichoke plant will be grown under similar soil and climatic conditions, '180 kg K2O ha(-1) + 30 kg ZS ha(-1) kg' may be recommended because it increased the properties examined.
- 1 January 2020
- Published by Tekirdag Ziraat Fakultesi Dergisi in Tekirdağ Ziraat Fakültesi Dergisi
- Vol. 17 (2) , 180-190
EFFECTS OF POTASSIUM AND ZINC FERTILIZATION ON THE YIELD AND YIELD COMPONENTS OF ARTICHOKE
This study was carried out to determine the effects of potassium (0, 60, 120 and 180 kg K2O ha(-1); K2SO4; 50% K2O) and zinc (0 and 30 kg ZnSO4 center dot 7H(2)O ha(-1); ZS; 22% Zn) applied on plant height, main head weight, numbers of head, concentrations of potassium and zinc in leaves and yield of early artichoke variety in Turkmen Village trial area of Agricultural Research Institute of Turkish Republic of Northern Cyprus during 2018-2019 artichoke growing period. According to the results, plant height increased 6.64% (60 kg K2O ha(-1) + 30 kg ZS ha(-1); 90.8 cm) compared to the control (85.3 cm) and 19.9% (120 kg K2O ha(-1) + 30 kg ZS ha(-1); 90.8 cm). Although the main head weight of the plant and the number of head per plant increased depending on the applications, an increasing was determined compared to the control. While the potassium concentrations of leaves increased between 5% and 65% compared to the control (0.44%), zinc concentrations increased by 9% compared to the control with only ZS application. The highest yield (89.720 kg ha(-1)) was obtained by '180 kg K2O ha(-1) + 30 kg ZS ha(-1)' treatment. With this application, the yield increased by 40.9% compared to the control. If the artichoke plant will be grown under similar soil and climatic conditions, '180 kg K2O ha(-1) + 30 kg ZS ha(-1) kg' may be recommended because it increased the properties examined.
- 26 July 2016
- Published by Taylor & Francis in Journal of Plant Nutrition
- Vol. 40 (1) , 93-103
Response of maize for grain to potassium and magnesium fertilizers in soils with high lime contents
An antagonistic reaction between calcium (Ca) and magnesium (Mg) and potassium (K) may lead to low absorption of K and Mg by plants from soils with high Ca contents even when levels of K and Mg should be adequate. Two separate field studies were carried out in 2009 and 2010 to determine the effects of potassium (0, 40, 80, 120 kg K2O ha−1; as potassium sulfate) and magnesium (0, 20, 40, 60 kg magnesium oxide (MgO)ha−1; as magnesium sulfate) applied to a soil with high lime content either separately or in combinations, on the grain yield and yield components of maize for grain in semi-arid Central Anatolia in Turkey. One dose of the K, Mg-fertilizers was applied during sowing in both years. According to the results, increasing the dosage of K increased yield components more than increases in Mg dosages. Combinations of K and Mg tended to maximize the yield components. Moreover, the greatest plant heights, first ear lengths, grain weights per ear and protein ratios were obtained for the K80Mg40 dose.
- 26 July 2016
- Published by Taylor & Francis in Journal of Plant Nutrition
- Vol. 40 (1) , 93-103
Response of maize for grain to potassium and magnesium fertilizers in soils with high lime contents
An antagonistic reaction between calcium (Ca) and magnesium (Mg) and potassium (K) may lead to low absorption of K and Mg by plants from soils with high Ca contents even when levels of K and Mg should be adequate. Two separate field studies were carried out in 2009 and 2010 to determine the effects of potassium (0, 40, 80, 120 kg K2O ha−1; as potassium sulfate) and magnesium (0, 20, 40, 60 kg magnesium oxide (MgO)ha−1; as magnesium sulfate) applied to a soil with high lime content either separately or in combinations, on the grain yield and yield components of maize for grain in semi-arid Central Anatolia in Turkey. One dose of the K, Mg-fertilizers was applied during sowing in both years. According to the results, increasing the dosage of K increased yield components more than increases in Mg dosages. Combinations of K and Mg tended to maximize the yield components. Moreover, the greatest plant heights, first ear lengths, grain weights per ear and protein ratios were obtained for the K80Mg40 dose.
- 10 June 2016
- Published by Taylor & Francis in Journal of Plant Nutrition
- Vol. 39 (12) , 1734-1744
Response of sunflower to potassium and magnesium fertilizers in calcerous soils in central Anatolia of Turkey
This research was carried out to determine the effects of potassium [0, 40, 80, 120 kg potassium oxide (K2O) ha−1] and magnesium (0, 20, 40, 60 kg magnesium oxide (MgO) ha−1) applied into soil separately and together on the grain yield and yield components of sunflower for oil grown in two farmer fields in the semi-arid Central Anatolia in 2009 and 2010. The experiments were set as factorial experiment design in randomized blocks and 4 replicates. Potassium and Mg-fertilizers were used in the single time into base in the sowing. According to the results, K application in the increasing doses increased yield components more than that of Mg. Together giving of the K and Mg in certain combinations took the yield components to maximum levels. The highest grain yields were obtained by the K40Mg40 in the first year (7313 kg ha−1) and by the Mg60 in the second year (6510 kg ha−1).
- 10 June 2016
- Published by Taylor & Francis in Journal of Plant Nutrition
- Vol. 39 (12) , 1734-1744
Response of sunflower to potassium and magnesium fertilizers in calcerous soils in central Anatolia of Turkey
This research was carried out to determine the effects of potassium [0, 40, 80, 120 kg potassium oxide (K2O) ha−1] and magnesium (0, 20, 40, 60 kg magnesium oxide (MgO) ha−1) applied into soil separately and together on the grain yield and yield components of sunflower for oil grown in two farmer fields in the semi-arid Central Anatolia in 2009 and 2010. The experiments were set as factorial experiment design in randomized blocks and 4 replicates. Potassium and Mg-fertilizers were used in the single time into base in the sowing. According to the results, K application in the increasing doses increased yield components more than that of Mg. Together giving of the K and Mg in certain combinations took the yield components to maximum levels. The highest grain yields were obtained by the K40Mg40 in the first year (7313 kg ha−1) and by the Mg60 in the second year (6510 kg ha−1).
- 19 July 2013
- Published by Springer Nature in Environmental Management
- Vol. 54 (5) , 1022-1042
Participatory Evaluation of Monitoring and Modeling of Sustainable Land Management Technologies in Areas Prone to Land Degradation
Examples of sustainable land management (SLM) exist throughout the world. In many cases, SLM has largely evolved through local traditional practices and incremental experimentation rather than being adopted on the basis of scientific evidence. This means that SLM technologies are often only adopted across small areas. The DESIRE (DESertIfication mitigation and REmediation of degraded land) project combined local traditional knowledge on SLM with empirical evaluation of SLM technologies. The purpose of this was to evaluate and select options for dissemination in 16 sites across 12 countries. It involved (i) an initial workshop to evaluate stakeholder priorities (reported elsewhere), (ii) field trials/empirical modeling, and then, (iii) further stakeholder evaluation workshops. This paper focuses on workshops in which stakeholders evaluated the performance of SLM technologies based on the scientific monitoring and modeling results from 15 study sites. It analyses workshop outcomes to evaluate how scientific results affected stakeholders’ perceptions of local SLM technologies. It also assessed the potential of this participatory approach in facilitating wider acceptance and implementation of SLM. In several sites, stakeholder preferences for SLM technologies changed as a consequence of empirical measurements and modeling assessments of each technology. Two workshop examples are presented in depth to: (a) explore the scientific results that triggered stakeholders to change their views; and (b) discuss stakeholders’ suggestions on how the adoption of SLM technologies could be up-scaled. The overall multi-stakeholder participatory approach taken is then evaluated. It is concluded that to facilitate broad-scale adoption of SLM technologies, de-contextualized, scientific generalisations must be given local context; scientific findings must be viewed alongside traditional beliefs and both scrutinized with equal rigor; and the knowledge of all kinds of experts must be recognised and considered in decision-making about SLM, whether it has been formally codified or not. The approach presented in this paper provided this opportunity and received positive feedback from stakeholders.
- 19 July 2013
- Published by Springer Nature in Environmental Management
- Vol. 54 (5) , 1022-1042
Participatory Evaluation of Monitoring and Modeling of Sustainable Land Management Technologies in Areas Prone to Land Degradation
Examples of sustainable land management (SLM) exist throughout the world. In many cases, SLM has largely evolved through local traditional practices and incremental experimentation rather than being adopted on the basis of scientific evidence. This means that SLM technologies are often only adopted across small areas. The DESIRE (DESertIfication mitigation and REmediation of degraded land) project combined local traditional knowledge on SLM with empirical evaluation of SLM technologies. The purpose of this was to evaluate and select options for dissemination in 16 sites across 12 countries. It involved (i) an initial workshop to evaluate stakeholder priorities (reported elsewhere), (ii) field trials/empirical modeling, and then, (iii) further stakeholder evaluation workshops. This paper focuses on workshops in which stakeholders evaluated the performance of SLM technologies based on the scientific monitoring and modeling results from 15 study sites. It analyses workshop outcomes to evaluate how scientific results affected stakeholders’ perceptions of local SLM technologies. It also assessed the potential of this participatory approach in facilitating wider acceptance and implementation of SLM. In several sites, stakeholder preferences for SLM technologies changed as a consequence of empirical measurements and modeling assessments of each technology. Two workshop examples are presented in depth to: (a) explore the scientific results that triggered stakeholders to change their views; and (b) discuss stakeholders’ suggestions on how the adoption of SLM technologies could be up-scaled. The overall multi-stakeholder participatory approach taken is then evaluated. It is concluded that to facilitate broad-scale adoption of SLM technologies, de-contextualized, scientific generalisations must be given local context; scientific findings must be viewed alongside traditional beliefs and both scrutinized with equal rigor; and the knowledge of all kinds of experts must be recognised and considered in decision-making about SLM, whether it has been formally codified or not. The approach presented in this paper provided this opportunity and received positive feedback from stakeholders.
- 1 February 2013
- Published by Springer Nature in Horticulture, Environment, and Biotechnology
- Vol. 54 (1) , 20-28
The effects of potassium on the yield and fruit quality components of stick tomato
- 1 February 2013
- Published by Springer Nature in Horticulture, Environment, and Biotechnology
- Vol. 54 (1) , 20-28
The effects of potassium on the yield and fruit quality components of stick tomato