Riyadul Hashem Riyad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Riyadul Hashem Riyad has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Ji Wu
Department of Chemistry and Biochemistry, Georgia Southern University, Statesboro, USA
2 shared publications - Junan Shen
Department of Civil Engineering and Construction, Georgia Southern University, Statesboro, GA 30458, USA
2 shared publications - Md Ashik Ahmed
Department of Nanoengineering, North Carolina Agricultural and Technical State University, Greensboro, NC, USA
2 shared publications - Asif Ahmed
Ahsanullah University of Science and Technology
1 shared publication - Debbrata Datta
Khulna University of Engineering & Technology
1 shared publication - Debo Brata Paul Argha
Texas State University
1 shared publication
Latest Publications
- Open Access
- 1 December 2024
- Published by Egyptian Knowledge Bank in SVU-International Journal of Engineering Sciences and Applications
- Vol. 5 (2) , 18-27
Forms, Importance and Sources of Dissolved Organic Nitrogen (DON) in the Environment: A Review
Dissolved organic nitrogen (DON) is an integral part of the dissolved organic carbon (DOC) reservoir, encompassing substances with nitrogen content. Within aquatic ecosystems such as lakes and rivers, DON molecules originate from photosynthetic entities like algae and plants, as well as the discharge of nitrogenous waste from mammals. Additional pathways introducing organic nitrogen into water include soil leaching, sewage discharge, and air deposition. Given the predominantly biological origin of most DON molecules, the pool comprehensively encompasses nitrogenous compounds present in living organisms. Notably, prevalent components of freshwater DON comprise proteins, unbound amino acids, amino sugars derived from cell walls, and nucleic acids sourced from RNA and DNA. Additionally, waste products like urea and methylamines are commonly detected in these environments. It is noteworthy that prevailing wastewater treatment methods predominantly target the removal of dissolved inorganic nitrogen (DIN) compounds, often overlooking non-reactive DON. Consequently, untreated DON significantly contributes to the overall nitrogen load. In wastewater treatment facilities (WWTPs) employing biological nitrogen removal (BNR) processes, DON constitutes the majority of the nitrogen present in the effluent. Although dissolved combined amino acids (DCAA) and dissolved free amino acids (DFAA) collectively contribute less than 4% and 1%, respectively, to the DON in the effluent, the main challenge lies in simultaneously maximizing the removal of DIN and the recovery of DON.
- 1 December 2024
- Published by Egyptian Knowledge Bank in SVU-International Journal of Engineering Sciences and Applications
- Vol. 5 (2) , 18-27
Open AccessForms, Importance and Sources of Dissolved Organic Nitrogen (DON) in the Environment: A Review
Dissolved organic nitrogen (DON) is an integral part of the dissolved organic carbon (DOC) reservoir, encompassing substances with nitrogen content. Within aquatic ecosystems such as lakes and rivers, DON molecules originate from photosynthetic entities like algae and plants, as well as the discharge of nitrogenous waste from mammals. Additional pathways introducing organic nitrogen into water include soil leaching, sewage discharge, and air deposition. Given the predominantly biological origin of most DON molecules, the pool comprehensively encompasses nitrogenous compounds present in living organisms. Notably, prevalent components of freshwater DON comprise proteins, unbound amino acids, amino sugars derived from cell walls, and nucleic acids sourced from RNA and DNA. Additionally, waste products like urea and methylamines are commonly detected in these environments. It is noteworthy that prevailing wastewater treatment methods predominantly target the removal of dissolved inorganic nitrogen (DIN) compounds, often overlooking non-reactive DON. Consequently, untreated DON significantly contributes to the overall nitrogen load. In wastewater treatment facilities (WWTPs) employing biological nitrogen removal (BNR) processes, DON constitutes the majority of the nitrogen present in the effluent. Although dissolved combined amino acids (DCAA) and dissolved free amino acids (DFAA) collectively contribute less than 4% and 1%, respectively, to the DON in the effluent, the main challenge lies in simultaneously maximizing the removal of DIN and the recovery of DON.
- Open Access
Feasibility of Using Combustion-Based Methods to Quantify Saline-Based Anti-Stripping Agent in Modified Asphalt Binders
“Anti-stripping Agents” or “adhesion promoters” can enhance the chemical affinity between asphalt and aggregate by increasing their mutual attraction. Various forms of anti-stripping agents have been proposed to mitigate pavement stripping, and siloxane-based Zychotherm is one of them. Choosing the appropriate type and dose of anti-stripping additives is no doubt vital to the intended performance. Therefore, it is critically important to determine the dose of the additives used in the modification of asphalt binders. This research developed a feasible detection method that can closely measure the dose (0.05% and 0.1%) of siloxane-based anti-stripping liquid agents. Related test methods, including heat combustion test, residue visualization, burning, and ignition, were implemented. The heat combustion results showed that with the addition of the Zychotherm anti-stripping additive, the average heat combustion value decreased by 1.34% and 1.72% for 0.05% and 0.1% Zychotherm-modified binder, respectively. In the burning and ignition process, the modified binder left yellowish substances in the residue, which is an indication of the presence of Zychotherm. The weight of the yellowish residue related more to the quantity of Zychotherm in the asphalt binder.
Open AccessFeasibility of Using Combustion-Based Methods to Quantify Saline-Based Anti-Stripping Agent in Modified Asphalt Binders
“Anti-stripping Agents” or “adhesion promoters” can enhance the chemical affinity between asphalt and aggregate by increasing their mutual attraction. Various forms of anti-stripping agents have been proposed to mitigate pavement stripping, and siloxane-based Zychotherm is one of them. Choosing the appropriate type and dose of anti-stripping additives is no doubt vital to the intended performance. Therefore, it is critically important to determine the dose of the additives used in the modification of asphalt binders. This research developed a feasible detection method that can closely measure the dose (0.05% and 0.1%) of siloxane-based anti-stripping liquid agents. Related test methods, including heat combustion test, residue visualization, burning, and ignition, were implemented. The heat combustion results showed that with the addition of the Zychotherm anti-stripping additive, the average heat combustion value decreased by 1.34% and 1.72% for 0.05% and 0.1% Zychotherm-modified binder, respectively. In the burning and ignition process, the modified binder left yellowish substances in the residue, which is an indication of the presence of Zychotherm. The weight of the yellowish residue related more to the quantity of Zychotherm in the asphalt binder.
- 31 March 2024
- Published by Echo Academic Publishing in Environmental Research and Technology
- Vol. 7 (1) , 41-60
Assessment of tube well water quality in selected residential areas in Khulna
Clean water is vital for sustainable development, fostering socio-economic growth, ecological stability, and human survival. The study aimed to evaluate the quality of tube well water in specific residential areas of Khulna for drinking purposes, comparing it with the standards of World Health Organization (WHO) and Bangladesh (BD). Twenty tube well water samples were collected from residential areas at depths of 700-1500 ft. The samples were tasted with about 20 parameters, including physical: color, taste, odor, total dissolved solids (TDS) and total suspended solids (TSS); chemical: acidity/alkalinity (pH), arsenic (As), electrical conductivity (EC), dissolved oxygen (DO), bicarbonate (HCO3–), calcium (Ca2+), magnesium (Mg2+), sodium (Na+), chloride (Cl–), iron (Fe), phosphate (PO43–), sulfate (SO42–), potassium (K+); and bacteriological parameters: total coliforms and E. coli bacteria. Most of the samples were found to have higher TDS (avg. 1380 mg/L), TSS (avg. 620 mg/L), Fe (avg. 20.2 mg/L), K+ (avg. 194.1 mg/L), and Na+ (avg. 439 mg/L) concentrations compared to the WHO and BD Standards. 90 to 95% of samples exhibited acceptable levels of EC, pH, DO, Mg2+, Ca2+, Cl–, and SO43–. The salinity levels in most of the samples were excessive to be used for drinking, and the levels were especially very high in samples S-01(Na+ 820 and Cl- 3195 mg/L) and S-04 (Na+ 660 and Cl- 2946 mg/L). The arsenic levels were found to be higher than acceptable limit in S-01 (0.086 mg/L) and S-04 (0.091 mg/L) as well. E. coli and other bacteria in a few samples (S-01, 04, 13, 16, 17, 19) were detected.
- 31 March 2024
- Published by Echo Academic Publishing in Environmental Research and Technology
- Vol. 7 (1) , 41-60
Assessment of tube well water quality in selected residential areas in Khulna
Clean water is vital for sustainable development, fostering socio-economic growth, ecological stability, and human survival. The study aimed to evaluate the quality of tube well water in specific residential areas of Khulna for drinking purposes, comparing it with the standards of World Health Organization (WHO) and Bangladesh (BD). Twenty tube well water samples were collected from residential areas at depths of 700-1500 ft. The samples were tasted with about 20 parameters, including physical: color, taste, odor, total dissolved solids (TDS) and total suspended solids (TSS); chemical: acidity/alkalinity (pH), arsenic (As), electrical conductivity (EC), dissolved oxygen (DO), bicarbonate (HCO3–), calcium (Ca2+), magnesium (Mg2+), sodium (Na+), chloride (Cl–), iron (Fe), phosphate (PO43–), sulfate (SO42–), potassium (K+); and bacteriological parameters: total coliforms and E. coli bacteria. Most of the samples were found to have higher TDS (avg. 1380 mg/L), TSS (avg. 620 mg/L), Fe (avg. 20.2 mg/L), K+ (avg. 194.1 mg/L), and Na+ (avg. 439 mg/L) concentrations compared to the WHO and BD Standards. 90 to 95% of samples exhibited acceptable levels of EC, pH, DO, Mg2+, Ca2+, Cl–, and SO43–. The salinity levels in most of the samples were excessive to be used for drinking, and the levels were especially very high in samples S-01(Na+ 820 and Cl- 3195 mg/L) and S-04 (Na+ 660 and Cl- 2946 mg/L). The arsenic levels were found to be higher than acceptable limit in S-01 (0.086 mg/L) and S-04 (0.091 mg/L) as well. E. coli and other bacteria in a few samples (S-01, 04, 13, 16, 17, 19) were detected.
- Open Access
- 29 January 2024
- Published by MDPI AG in Preprints.org
Feasibility of Using Combustion-based Methods to Quantify Saline-based Anti-stripping Agent in Its Modified Asphalt Binders
“Anti-stripping Agents" or "adhesion promoters” can enhance the chemical affinity between as-phalt and aggregate by increasing their mutual attraction. Various forms of anti-stripping agents have been proposed to mitigate pavement stripping, and siloxane-based Zychotherm is one of them. Choosing the appropriate type and dose of anti-stripping additives is no doubt vital to the intended performance. Therefore, it is critically important to determine the dose of the additives used in the modification of asphalt binders. This research developed a feasible detection method that can closely measure the dose (0.05% and 0.1%) of siloxane-based anti-stripping liquid agents. Related test methods including heat combustion test, residue visualization, burning, and ignition were implemented. Heat combustion results showed that with the addition of Zychotherm anti-stripping additive, average heat combustion value decreased by 1.34% and 1.72% for 0.05% and 0.1% Zychotherm modified binder respectively. In the burning and ignition process, the modified binder leaves yellowish substances in the residue, which is an indication of the presence of Zy-chotherm. The weight of the yellowish residue relates more to the quantity of Zychotherm in as-phalt binder.
- 29 January 2024
- Published by MDPI AG in Preprints.org
Open AccessFeasibility of Using Combustion-based Methods to Quantify Saline-based Anti-stripping Agent in Its Modified Asphalt Binders
“Anti-stripping Agents" or "adhesion promoters” can enhance the chemical affinity between as-phalt and aggregate by increasing their mutual attraction. Various forms of anti-stripping agents have been proposed to mitigate pavement stripping, and siloxane-based Zychotherm is one of them. Choosing the appropriate type and dose of anti-stripping additives is no doubt vital to the intended performance. Therefore, it is critically important to determine the dose of the additives used in the modification of asphalt binders. This research developed a feasible detection method that can closely measure the dose (0.05% and 0.1%) of siloxane-based anti-stripping liquid agents. Related test methods including heat combustion test, residue visualization, burning, and ignition were implemented. Heat combustion results showed that with the addition of Zychotherm anti-stripping additive, average heat combustion value decreased by 1.34% and 1.72% for 0.05% and 0.1% Zychotherm modified binder respectively. In the burning and ignition process, the modified binder leaves yellowish substances in the residue, which is an indication of the presence of Zy-chotherm. The weight of the yellowish residue relates more to the quantity of Zychotherm in as-phalt binder.
- 30 June 2021
- Published by Echo Academic Publishing in Environmental Research and Technology
- Vol. 4 (2) , 108-116
Recycling of cotton dust for organic farming is a pivotal replacement of chemical fertilizers by composting and its quality analysis
Improper management of cotton dust wastes creates environmental pollution as well as different health problems. Cotton dust waste contains important nutrient elements that can meet the need for micronutrients of crop plants that will be a potential replacement of chemical fertilizers. In this study, it was to produce the cotton dust for further utilization as compost plant raw materials and analyzed and compared various parameters in different maturity days. The cotton dust was produced in compost with different combinations with different materials (cotton dust ash, rice bran, rice bran ash, Urea) by composting pit method. It was analyzed for a wide range of parameters including heavy metals and compared with standard compost parameters. The C:N ratio varies from 18:1 to 58:1 within forty days and 17:1 to 37:1 within fifty days and 17:1 to 31:1 within sixty days. The other specification such as physical condition, color, pH, N(%), P(%), K(%), S(%), were within the standard limits. Therefore, the result of the study suggested, for forty, fifty, and sixty days matured compost, samples 1,3,4,5, samples 1,2,4,5, and samples 1,2,3,5 respectively could be used in the agriculture land for cultivation to reduce the harmful effect of chemical fertilizer in the land. The cotton dust samples 2,3,4 respectively, for forty, fifty, and sixty days should be avoided for a higher value of the C:N ratio. This information could be beneficial for the practical application of cotton dust in agriculture in Bangladesh and can be a sustainable solution in textile spinning pollution.
- 30 June 2021
- Published by Echo Academic Publishing in Environmental Research and Technology
- Vol. 4 (2) , 108-116
Recycling of cotton dust for organic farming is a pivotal replacement of chemical fertilizers by composting and its quality analysis
Improper management of cotton dust wastes creates environmental pollution as well as different health problems. Cotton dust waste contains important nutrient elements that can meet the need for micronutrients of crop plants that will be a potential replacement of chemical fertilizers. In this study, it was to produce the cotton dust for further utilization as compost plant raw materials and analyzed and compared various parameters in different maturity days. The cotton dust was produced in compost with different combinations with different materials (cotton dust ash, rice bran, rice bran ash, Urea) by composting pit method. It was analyzed for a wide range of parameters including heavy metals and compared with standard compost parameters. The C:N ratio varies from 18:1 to 58:1 within forty days and 17:1 to 37:1 within fifty days and 17:1 to 31:1 within sixty days. The other specification such as physical condition, color, pH, N(%), P(%), K(%), S(%), were within the standard limits. Therefore, the result of the study suggested, for forty, fifty, and sixty days matured compost, samples 1,3,4,5, samples 1,2,4,5, and samples 1,2,3,5 respectively could be used in the agriculture land for cultivation to reduce the harmful effect of chemical fertilizer in the land. The cotton dust samples 2,3,4 respectively, for forty, fifty, and sixty days should be avoided for a higher value of the C:N ratio. This information could be beneficial for the practical application of cotton dust in agriculture in Bangladesh and can be a sustainable solution in textile spinning pollution.