Mehri Hadinezhad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mehri Hadinezhad has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Elroy R. Cober
Ottawa Research and Development Centre, Agriculture and Agri-Food Canada, Ottawa, ON K1A 0C6, Canada
3 shared publications - Anfu Hou
Morden Research and Development Centre, Agriculture and Agri-Food Canada, Morden, MB R6M 1Y5, Canada
2 shared publications - Bahram Samanfar
Ottawa Research and Development Centre, Agriculture and Agri-Food Canada
2 shared publications - Simon Lackey
Ottawa Research and Development Centre Agriculture and Agri‐Food Canada Ottawa Ontario Canada
2 shared publications Aaron Beattie
Department of Plant Sciences, Crop Development Centre University of Saskatchewan Saskatoon Saskatchewan Canada
1 shared publicationAllan Cummiskey
Charlottetown Research and Development Centre AAFC Charlottetown Prince Edward Island Canada
1 shared publication
Latest Publications
- Open Access
- 12 March 2026
- Published by Wiley in Journal of the Science of Food and Agriculture
- Vol. 106 (8) , 4994-5011
Soybean seed coat properties as determinants of natto and sprout quality
BACKGROUND: Improving breeding efficiency for superior soybean ( Glycine max (L.) Merr.) germplasm used in natto and sprouts requires understanding how seed coat properties relate to quality and functional traits. METHODS: We measured seed weight, water uptake, and sprout length and thickness across various genotypes tested at different locations and years. For the 2023–2024 set, we also analyzed fresh sprout weight and the percentage of good sprouts. Seed coat percentage was determined as the seed coat weight relative to the total seed weight. Additionally, we established a robust and reproducible method using scanning electron microscopy (SEM) to directly measure seed coat thickness. RESULTS: Genotype was the dominant factor influencing nearly all traits, while location, year, and genotype × environment interactions were negligible – except for sprout length in one dataset. Seed coat percentage was unrelated to water uptake but inversely correlated with seed size, and did not consistently predict sprout thickness or length. Importantly, this study is the first to directly measure seed coat thickness and demonstrate its association with water uptake, offering a practical selection criterion for breeding programs targeting natto and sprout quality. SEM imaging further enables detailed analysis of seed coat layers and structural features, opening new opportunities for trait characterization. CONCLUSION: By introducing a direct, scalable approach to quantify seed coat traits, this work provides a foundation for more precise breeding strategies and highlights the role of structural seed attributes in improving specialty soybean products. Future research could integrate seed coat thickness into genomic selection models to accelerate breeding progress. © 2026 The Author(s). Journal of the Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
- 12 March 2026
- Published by Wiley in Journal of the Science of Food and Agriculture
- Vol. 106 (8) , 4994-5011
Open AccessSoybean seed coat properties as determinants of natto and sprout quality
BACKGROUND: Improving breeding efficiency for superior soybean ( Glycine max (L.) Merr.) germplasm used in natto and sprouts requires understanding how seed coat properties relate to quality and functional traits. METHODS: We measured seed weight, water uptake, and sprout length and thickness across various genotypes tested at different locations and years. For the 2023–2024 set, we also analyzed fresh sprout weight and the percentage of good sprouts. Seed coat percentage was determined as the seed coat weight relative to the total seed weight. Additionally, we established a robust and reproducible method using scanning electron microscopy (SEM) to directly measure seed coat thickness. RESULTS: Genotype was the dominant factor influencing nearly all traits, while location, year, and genotype × environment interactions were negligible – except for sprout length in one dataset. Seed coat percentage was unrelated to water uptake but inversely correlated with seed size, and did not consistently predict sprout thickness or length. Importantly, this study is the first to directly measure seed coat thickness and demonstrate its association with water uptake, offering a practical selection criterion for breeding programs targeting natto and sprout quality. SEM imaging further enables detailed analysis of seed coat layers and structural features, opening new opportunities for trait characterization. CONCLUSION: By introducing a direct, scalable approach to quantify seed coat traits, this work provides a foundation for more precise breeding strategies and highlights the role of structural seed attributes in improving specialty soybean products. Future research could integrate seed coat thickness into genomic selection models to accelerate breeding progress. © 2026 The Author(s). Journal of the Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
- Open Access
- 18 October 2025
- Published by MDPI AG in Methods and Protocols
- Vol. 8 (5) , 124
Accelerated Screening of Wheat Gluten Strength Using Dual Physicochemical Tests in Diverse Breeding Lines
Introducing fast, reliable, and low-input technologies that utilize wholemeal wheat is essential for efficiently screening gluten quality in wheat breeding lines. Although the GlutoPeak Tester (GPT) has been widely studied for gluten assessment, its application in breeding programs remains underexplored. This study presents a comprehensive approach to optimizing a GPT protocol using a diverse set of genotypes collected over seven harvest years and multiple environments. To improve screening capabilities, a quick and simple protein fractionation (PF) technique was integrated into the workflow. Key GPT parameters—such as peak maximum time, maximum torque, and aggregation energy—along with the newly proposed PM-AM parameter, showed strong correlations with established quality traits. PF data, especially insoluble glutenin percentage and the ratio of insoluble to soluble glutenin, provided additional insights into gluten composition. This extensive dataset supports the use of GPT and PF as a dual, high-throughput screening tool. When applied within specific wheat classes and benchmarked against established checks, this method offers a robust strategy for ranking breeding lines based on gluten performance. The use of wholemeal samples further streamlines the process by eliminating the need for milling, making this protocol particularly suitable for early-stage selection in wheat breeding programs.
- 18 October 2025
- Published by MDPI AG in Methods and Protocols
- Vol. 8 (5) , 124
Open AccessAccelerated Screening of Wheat Gluten Strength Using Dual Physicochemical Tests in Diverse Breeding Lines
Introducing fast, reliable, and low-input technologies that utilize wholemeal wheat is essential for efficiently screening gluten quality in wheat breeding lines. Although the GlutoPeak Tester (GPT) has been widely studied for gluten assessment, its application in breeding programs remains underexplored. This study presents a comprehensive approach to optimizing a GPT protocol using a diverse set of genotypes collected over seven harvest years and multiple environments. To improve screening capabilities, a quick and simple protein fractionation (PF) technique was integrated into the workflow. Key GPT parameters—such as peak maximum time, maximum torque, and aggregation energy—along with the newly proposed PM-AM parameter, showed strong correlations with established quality traits. PF data, especially insoluble glutenin percentage and the ratio of insoluble to soluble glutenin, provided additional insights into gluten composition. This extensive dataset supports the use of GPT and PF as a dual, high-throughput screening tool. When applied within specific wheat classes and benchmarked against established checks, this method offers a robust strategy for ranking breeding lines based on gluten performance. The use of wholemeal samples further streamlines the process by eliminating the need for milling, making this protocol particularly suitable for early-stage selection in wheat breeding programs.
- 1 January 2025
- Published by Canadian Science Publishing in Canadian Journal of Plant Science
- Vol. 105, 1-3
AAC Springfield soybean
AAC Springfield is a high protein soybean [ Glycine max (L.) Merr.] cultivar developed by the Ottawa Research and Development Centre, Agriculture and Agri-Food Canada, Ottawa, Ontario. It is intended for production in 2400 to 2600 crop heat unit areas of Manitoba, Ontario, and Quebec. AAC Springfield has a unique combination of high protein, high 11S:7S ratio, and early maturity.
- 1 January 2025
- Published by Canadian Science Publishing in Canadian Journal of Plant Science
- Vol. 105, 1-3
AAC Springfield soybean
AAC Springfield is a high protein soybean [ Glycine max (L.) Merr.] cultivar developed by the Ottawa Research and Development Centre, Agriculture and Agri-Food Canada, Ottawa, Ontario. It is intended for production in 2400 to 2600 crop heat unit areas of Manitoba, Ontario, and Quebec. AAC Springfield has a unique combination of high protein, high 11S:7S ratio, and early maturity.
- Open Access
Evaluation of Short-Season Soybean (Glycine max (L.) Merr.) Breeding Lines for Tofu Production
Soybean breeding programs targeting tofu quality must evaluate their performance within zones of adaptation. A comprehensive study was carried out to examine soybean breeding lines from three maturity groups (MGs; MG0, MG00, and MG000) from 2018 to 2022. Several agronomic, chemical composition and tofu-related quality traits were evaluated, and the associations among traits were investigated. The results showed that genotypes in MG0 yielded higher and matured later, which confirmed that the selection of targeted genotypes for a specific maturity group was successful. Non-imbibed “stone seeds”, an important quality trait for tofu processors, were higher in MG000 lines. Tofu texture using both GDL and MgCl2 coagulants was positively associated, indicating one coagulant might be enough for screening purposes. The MG by traits biplot showed very clear MG clustering for all genotypes tested from 2018 to 2022, signifying that the MG has a more pronounced effect on the investigated traits than the environmental effects seen in different years, regardless of the MG. Most tofu-related traits were higher and showed stronger associations in MG0 lines compared to the lines in earlier MGs, indicating a need for future effort in shorter season MGs. Overall, this study provided useful information for selecting soybean lines for tofu end-use application targeting specific MGs.
Open AccessEvaluation of Short-Season Soybean (Glycine max (L.) Merr.) Breeding Lines for Tofu Production
Soybean breeding programs targeting tofu quality must evaluate their performance within zones of adaptation. A comprehensive study was carried out to examine soybean breeding lines from three maturity groups (MGs; MG0, MG00, and MG000) from 2018 to 2022. Several agronomic, chemical composition and tofu-related quality traits were evaluated, and the associations among traits were investigated. The results showed that genotypes in MG0 yielded higher and matured later, which confirmed that the selection of targeted genotypes for a specific maturity group was successful. Non-imbibed “stone seeds”, an important quality trait for tofu processors, were higher in MG000 lines. Tofu texture using both GDL and MgCl2 coagulants was positively associated, indicating one coagulant might be enough for screening purposes. The MG by traits biplot showed very clear MG clustering for all genotypes tested from 2018 to 2022, signifying that the MG has a more pronounced effect on the investigated traits than the environmental effects seen in different years, regardless of the MG. Most tofu-related traits were higher and showed stronger associations in MG0 lines compared to the lines in earlier MGs, indicating a need for future effort in shorter season MGs. Overall, this study provided useful information for selecting soybean lines for tofu end-use application targeting specific MGs.
- Open Access
- 2 October 2023
- Published by Wiley in Crop Science
- Vol. 63 (6) , 3356-3366
Exploring the trait‐yield association patterns in different oat mega‐environments of Canada
This article presents a graphical method to visually analyze the trait–yield association (TYA) patterns based on data from multi‐location, multi‐year crop variety trials, exemplified using oat data from trials conducted across Canada from 2017 to 2022. Each year a new set of 60–66 oat (Avena sativa L.) breeding lines were tested in replicated yield trials at 9–11 locations, and data for yield, key agronomic and quality traits, and crown rust scores were collected at all or some of the locations. Pearson correlation coefficient was calculated between yield and each trait for each trial. The correlation coefficients from different locations and years were arranged in a TYA × trial (TYT) two‐way table. This table was subjected to singular value decomposition, and the resulting first two principal components were used to generate a TYT biplot. The TYT biplot revealed three oat mega‐environments (MEs) in Canada, consistent with the conclusion from previous ME analyses, indicating that each ME had its characteristic TYA patterns. It was found that yield was consistently and positively correlated with crown rust (Puccinia coronata var. avenae) resistance, test weight, kernel weight, and groat content in ME1 (the crown rust‐prone regions of Ontario); yield was correlated positively with plant height but negatively with oil content in ME2 (the northern regions of eastern Canada). Interestingly, crown rust resistance was found to contribute negatively to yield in ME2. No strong and consistent TYAs were found in ME3 (the Canadian prairies). Different types of TYAs have different uses in genotypic selection.
- 2 October 2023
- Published by Wiley in Crop Science
- Vol. 63 (6) , 3356-3366
Open AccessExploring the trait‐yield association patterns in different oat mega‐environments of Canada
This article presents a graphical method to visually analyze the trait–yield association (TYA) patterns based on data from multi‐location, multi‐year crop variety trials, exemplified using oat data from trials conducted across Canada from 2017 to 2022. Each year a new set of 60–66 oat (Avena sativa L.) breeding lines were tested in replicated yield trials at 9–11 locations, and data for yield, key agronomic and quality traits, and crown rust scores were collected at all or some of the locations. Pearson correlation coefficient was calculated between yield and each trait for each trial. The correlation coefficients from different locations and years were arranged in a TYA × trial (TYT) two‐way table. This table was subjected to singular value decomposition, and the resulting first two principal components were used to generate a TYT biplot. The TYT biplot revealed three oat mega‐environments (MEs) in Canada, consistent with the conclusion from previous ME analyses, indicating that each ME had its characteristic TYA patterns. It was found that yield was consistently and positively correlated with crown rust (Puccinia coronata var. avenae) resistance, test weight, kernel weight, and groat content in ME1 (the crown rust‐prone regions of Ontario); yield was correlated positively with plant height but negatively with oil content in ME2 (the northern regions of eastern Canada). Interestingly, crown rust resistance was found to contribute negatively to yield in ME2. No strong and consistent TYAs were found in ME3 (the Canadian prairies). Different types of TYAs have different uses in genotypic selection.
- Open Access
- 23 May 2023
- Published by Wiley in Crop Science
- Vol. 63 (4) , 2162-2183
Genetic variability of kernel phenolics in maize (Zea mays L.) inbreds with differing levels of resistance to gibberella ear rot
- 23 May 2023
- Published by Wiley in Crop Science
- Vol. 63 (4) , 2162-2183
Open AccessGenetic variability of kernel phenolics in maize (Zea mays L.) inbreds with differing levels of resistance to gibberella ear rot
- Open Access
- 23 December 2022
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (1) , 222
A Multi-Year, Multi-Cultivar Approach to Differential Expression Analysis of High- and Low-Protein Soybean (Glycine max)
Soybean (Glycine max (L.) Merr.) is among the most valuable crops based on its nutritious seed protein and oil. Protein quality, evaluated as the ratio of glycinin (11S) to β-conglycinin (7S), can play a role in food and feed quality. To help uncover the underlying differences between high and low protein soybean varieties, we performed differential expression analysis on high and low total protein soybean varieties and high and low 11S soybean varieties grown in four locations across Eastern and Western Canada over three years (2018–2020). Simultaneously, ten individual differential expression datasets for high vs. low total protein soybeans and ten individual differential expression datasets for high vs. low 11S soybeans were assessed, for a total of 20 datasets. The top 15 most upregulated and the 15 most downregulated genes were extracted from each differential expression dataset and cross-examination was conducted to create shortlists of the most consistently differentially expressed genes. Shortlisted genes were assessed for gene ontology to gain a global appreciation of the commonly differentially expressed genes. Genes with roles in the lipid metabolic pathway and carbohydrate metabolic pathway were differentially expressed in high total protein and high 11S soybeans in comparison to their low total protein and low 11S counterparts. Expression differences were consistent between East and West locations with the exception of one, Glyma.03G054100. These data are important for uncovering the genes and biological pathways responsible for the difference in seed protein between high and low total protein or 11S cultivars.
- 23 December 2022
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (1) , 222
Open AccessA Multi-Year, Multi-Cultivar Approach to Differential Expression Analysis of High- and Low-Protein Soybean (Glycine max)
Soybean (Glycine max (L.) Merr.) is among the most valuable crops based on its nutritious seed protein and oil. Protein quality, evaluated as the ratio of glycinin (11S) to β-conglycinin (7S), can play a role in food and feed quality. To help uncover the underlying differences between high and low protein soybean varieties, we performed differential expression analysis on high and low total protein soybean varieties and high and low 11S soybean varieties grown in four locations across Eastern and Western Canada over three years (2018–2020). Simultaneously, ten individual differential expression datasets for high vs. low total protein soybeans and ten individual differential expression datasets for high vs. low 11S soybeans were assessed, for a total of 20 datasets. The top 15 most upregulated and the 15 most downregulated genes were extracted from each differential expression dataset and cross-examination was conducted to create shortlists of the most consistently differentially expressed genes. Shortlisted genes were assessed for gene ontology to gain a global appreciation of the commonly differentially expressed genes. Genes with roles in the lipid metabolic pathway and carbohydrate metabolic pathway were differentially expressed in high total protein and high 11S soybeans in comparison to their low total protein and low 11S counterparts. Expression differences were consistent between East and West locations with the exception of one, Glyma.03G054100. These data are important for uncovering the genes and biological pathways responsible for the difference in seed protein between high and low total protein or 11S cultivars.