Balaram Dey
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Balaram Dey has a total of 87 co-authors. Here are the top co-authors by number of shared publications:
- Nguyen Quang Hung
Duy Tan University
6 shared publications - Srijit Bhattacharya
Barasat Government College
6 shared publications Srijit Bhattacharya
Department of Physics Haldia Goverment College Purba Medinipur 721657 West Bengal India
5 shared publicationsDeepak Pandit
Variable Energy Cyclotron Centre 1/AF-Bidhannagar 700064 Kolkata India
4 shared publications- Deepak Pandit
Variable Energy Cyclotron Centre
4 shared publications - Nguyen Ngoc Anh
Phenikaa University
4 shared publications
Latest Publications
- Open Access
- 1 July 2026
- Published by Elsevier in Physics Letters B
- Vol. 880
Role of magicity in the low temperature evolution of IVGDR width in Te isotopes
- 1 July 2026
- Published by Elsevier in Physics Letters B
- Vol. 880
Open AccessRole of magicity in the low temperature evolution of IVGDR width in Te isotopes
- 9 January 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics E
- Vol. 35 (03)
Analysis of (p,γ) capture cross-sections relevant to p -process using TALYS for A = 75–110
The proton capture ([ ]) cross-sections for eight different atomic nuclei in the mass region [ ]–110 were calculated within the nuclear reaction model code TALYS. For all the reactions, we tested different combinations of inputs for level density (l.d) parameter and gamma strength function ([ ]). Finally, it was observed that the application of hybrid input in TALYS (macroscopic l.d and microscopic or semi-microscopic [ ] or in abbreviation mac-mic) resulted in successful agreement of theoretical prediction that the existing experimental data. Isospin correction was also incorporated in a few cases which improved the matching if the center-of-mass energy reached the threshold energy of the opening of ([ ]) channel. The corresponding thermonuclear reaction rates were calculated for all the nuclei and some discrepancies were found with the prediction of the NONSMOKER code. Using the particular mac-mic input combination, the cross-section and reaction rate for the nuclei [ ]Nb and [ ]Mo were calculated within TALYS. These two nuclei lack experimental data but are highly important for understanding early solar system processes. This is a rare attempt to explain the p-capture cross-section of different p-nuclei ([ ]–110 range) with similar set of input combinations in TALYS, which may help to remove the uncertainty generated due to the variation of input parameters within nuclear statistical model codes.
- 9 January 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics E
- Vol. 35 (03)
Analysis of (p,γ) capture cross-sections relevant to p -process using TALYS for A = 75–110
The proton capture ([ ]) cross-sections for eight different atomic nuclei in the mass region [ ]–110 were calculated within the nuclear reaction model code TALYS. For all the reactions, we tested different combinations of inputs for level density (l.d) parameter and gamma strength function ([ ]). Finally, it was observed that the application of hybrid input in TALYS (macroscopic l.d and microscopic or semi-microscopic [ ] or in abbreviation mac-mic) resulted in successful agreement of theoretical prediction that the existing experimental data. Isospin correction was also incorporated in a few cases which improved the matching if the center-of-mass energy reached the threshold energy of the opening of ([ ]) channel. The corresponding thermonuclear reaction rates were calculated for all the nuclei and some discrepancies were found with the prediction of the NONSMOKER code. Using the particular mac-mic input combination, the cross-section and reaction rate for the nuclei [ ]Nb and [ ]Mo were calculated within TALYS. These two nuclei lack experimental data but are highly important for understanding early solar system processes. This is a rare attempt to explain the p-capture cross-section of different p-nuclei ([ ]–110 range) with similar set of input combinations in TALYS, which may help to remove the uncertainty generated due to the variation of input parameters within nuclear statistical model codes.
- Open Access
Unraveling the anomaly in the production of $^{60}$Fe nucleus in massive stars
The production of $^{60}$Fe is crucial for nucleosynthesis in massive stars and supernovae. In this work, by using the microscopic EP+IPM (exact pairing plus the independent-particle model) for the nuclear level density (NLD) and extended EP+PDM (exact pairing plus phonon damping model) for the $γ$-ray strength function (gSF), we re-evaluate the substantial enhancement of $^{60}$Fe production recently reported in {\it A. Spyrou et al., Nat. Comm. {\bf 15}, 9608 (2024)}, which was attributed to an unexpectedly large Maxwellian-averaged cross section (MACS). Our analysis demonstrates that this enhancement indeed originates from the choice of NLD, which, despite being constrained to reproduce the total NLD and gSF data, lacks a reliable spin dependence, a critical input for Hauser-Feshbach calculations of nuclear reaction rate. In contrast, our predictions yield a significantly lower MACS, calling the claimed enhancement into question. In particular, our approach highlights the microscopic nature of the low-energy enhancement of the gSF, the so-called upbend resonance, which arises from strong particle-particle ($pp$) and hole-hole ($hh$) excitations that emerge only at finite temperature, thereby further reinsisting on the invalidity of the Brink-Axel hypothesis in this low-energy region. Overall, our study reopens the question on the long-standing problem of $^{60}$Fe production in massive stars.
Open AccessUnraveling the anomaly in the production of $^{60}$Fe nucleus in massive stars
The production of $^{60}$Fe is crucial for nucleosynthesis in massive stars and supernovae. In this work, by using the microscopic EP+IPM (exact pairing plus the independent-particle model) for the nuclear level density (NLD) and extended EP+PDM (exact pairing plus phonon damping model) for the $γ$-ray strength function (gSF), we re-evaluate the substantial enhancement of $^{60}$Fe production recently reported in {\it A. Spyrou et al., Nat. Comm. {\bf 15}, 9608 (2024)}, which was attributed to an unexpectedly large Maxwellian-averaged cross section (MACS). Our analysis demonstrates that this enhancement indeed originates from the choice of NLD, which, despite being constrained to reproduce the total NLD and gSF data, lacks a reliable spin dependence, a critical input for Hauser-Feshbach calculations of nuclear reaction rate. In contrast, our predictions yield a significantly lower MACS, calling the claimed enhancement into question. In particular, our approach highlights the microscopic nature of the low-energy enhancement of the gSF, the so-called upbend resonance, which arises from strong particle-particle ($pp$) and hole-hole ($hh$) excitations that emerge only at finite temperature, thereby further reinsisting on the invalidity of the Brink-Axel hypothesis in this low-energy region. Overall, our study reopens the question on the long-standing problem of $^{60}$Fe production in massive stars.
- 9 December 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (51) , 22503-22513
Identifying Superior Alternatives for Deep-Ultraviolet LEDs under High Pressure
- 9 December 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (51) , 22503-22513
Identifying Superior Alternatives for Deep-Ultraviolet LEDs under High Pressure
- Open Access
- 16 June 2025
- Published by Elsevier in Physics Letters B
- Vol. 868
Study of the giant dipole resonance around the magic number 28
- 16 June 2025
- Published by Elsevier in Physics Letters B
- Vol. 868
Open AccessStudy of the giant dipole resonance around the magic number 28
- Open Access
- 3 June 2025
- Published by IOP Publishing in Journal of Physics G: Nuclear and Particle Physics
- Vol. 52 (6) , 065102
Analysis of phase transitions in hot 160−164Dy nuclei
Phase transitions in hot 160−164Dy isotopes are analyzed using a classification scheme based on the distribution of zeros of the canonical ensemble (CE) partition function in the complex inverse temperature plane. Semi-empirical nuclear level densities (NLD), which are obtained by combining experimental data in the excitation-energy region below the neutron binding energy and the back-shifted Fermi gas model prediction for the high excitation-energy up to 250 MeV, are utilized to determine the CE partition function. Results obtained show that two phase transitions can appear in 160−164Dy isotopes, namely the pairing phase transition and the shape phase transition. The pairing phase transition is found to be of first-order and its critical temperature is ∼0.5 MeV, while the shape phase transition is found to be also of first-order but it occurs at higher temperatures, i.e. around 2.2–2.5 MeV. A comparison between this work and previous ones that involve the same classification scheme but employ purely theoretical NLD has shown a considerable inconsistency. However, our findings should be more conclusive due to various supports from previous theoretical and experimental studies.
- 3 June 2025
- Published by IOP Publishing in Journal of Physics G: Nuclear and Particle Physics
- Vol. 52 (6) , 065102
Open AccessAnalysis of phase transitions in hot 160−164Dy nuclei
Phase transitions in hot 160−164Dy isotopes are analyzed using a classification scheme based on the distribution of zeros of the canonical ensemble (CE) partition function in the complex inverse temperature plane. Semi-empirical nuclear level densities (NLD), which are obtained by combining experimental data in the excitation-energy region below the neutron binding energy and the back-shifted Fermi gas model prediction for the high excitation-energy up to 250 MeV, are utilized to determine the CE partition function. Results obtained show that two phase transitions can appear in 160−164Dy isotopes, namely the pairing phase transition and the shape phase transition. The pairing phase transition is found to be of first-order and its critical temperature is ∼0.5 MeV, while the shape phase transition is found to be also of first-order but it occurs at higher temperatures, i.e. around 2.2–2.5 MeV. A comparison between this work and previous ones that involve the same classification scheme but employ purely theoretical NLD has shown a considerable inconsistency. However, our findings should be more conclusive due to various supports from previous theoretical and experimental studies.
- 8 October 2024
- Published by IOP Publishing in Journal of Physics G: Nuclear and Particle Physics
- Vol. 51 (11) , 115104
Impact of nuclear level density and γ-ray strength function in (n,γ) and Maxwellian-averaged cross-section of 69Zn nucleus
The present paper highlights the impact of nuclear level density (NLD) and γ-ray strength function (γ-SF) on (n,γ) and Maxwellian-averaged cross-section of 69Zn nucleus. At first, the existing NLD and γ-SF models (in TALYS statistical model code) have been utilized to understand the role of NLD and γ-SF in neutron capture reaction cross-section. It is seen that most of the combinations of existing NLDs and γ-SFs (phenomenological and/or microscopic) cannot explain the experimental data. Therefore, the microscopic exact pairing plus independent particle model (EP+IPM) and exact pairing plus phonon damping model (EP+PDM) have been carried out to calculate the NLD and γ-SF of 69Zn nucleus, respectively, by employing the exact treatment of thermal pairing. It is seen that microscopic EP+IPM NLD and EP+PDM γ-SF explain the experimental data better than all other combinations available in TALYS-1.95, indicating the impact of the exact treatment of thermal pairing correlation. In addition, the inclusion of an upbend (UB) structure in γ-SF further improves the comparison with the experimental data in the low energy region (∼0.01–0.15 MeV), indicating the possibility of having an UB structure in γ-SF of 69Zn. The 68Zn(n,γ)69Zn reaction cross-section obtained by utilizing the EP+IPM NLD and EP+PDM γ-SF including UB structure is then used to predict the Maxwellian-averaged cross-sections, and the obtained results show reasonable agreement with all the available experimental data taken from the Karlsruhe Astrophysical Database of Nucleosynthesis in Stars. The present results reflect the impact of microscopic NLD and γ-SF on the precise description and/or prediction of the astrophysical reaction cross-section.
- 8 October 2024
- Published by IOP Publishing in Journal of Physics G: Nuclear and Particle Physics
- Vol. 51 (11) , 115104
Impact of nuclear level density and γ-ray strength function in (n,γ) and Maxwellian-averaged cross-section of 69Zn nucleus
The present paper highlights the impact of nuclear level density (NLD) and γ-ray strength function (γ-SF) on (n,γ) and Maxwellian-averaged cross-section of 69Zn nucleus. At first, the existing NLD and γ-SF models (in TALYS statistical model code) have been utilized to understand the role of NLD and γ-SF in neutron capture reaction cross-section. It is seen that most of the combinations of existing NLDs and γ-SFs (phenomenological and/or microscopic) cannot explain the experimental data. Therefore, the microscopic exact pairing plus independent particle model (EP+IPM) and exact pairing plus phonon damping model (EP+PDM) have been carried out to calculate the NLD and γ-SF of 69Zn nucleus, respectively, by employing the exact treatment of thermal pairing. It is seen that microscopic EP+IPM NLD and EP+PDM γ-SF explain the experimental data better than all other combinations available in TALYS-1.95, indicating the impact of the exact treatment of thermal pairing correlation. In addition, the inclusion of an upbend (UB) structure in γ-SF further improves the comparison with the experimental data in the low energy region (∼0.01–0.15 MeV), indicating the possibility of having an UB structure in γ-SF of 69Zn. The 68Zn(n,γ)69Zn reaction cross-section obtained by utilizing the EP+IPM NLD and EP+PDM γ-SF including UB structure is then used to predict the Maxwellian-averaged cross-sections, and the obtained results show reasonable agreement with all the available experimental data taken from the Karlsruhe Astrophysical Database of Nucleosynthesis in Stars. The present results reflect the impact of microscopic NLD and γ-SF on the precise description and/or prediction of the astrophysical reaction cross-section.
- 2 June 2023
- Published by IOP Publishing in Journal of Physics G: Nuclear and Particle Physics
- Vol. 50 (7) , 075104
Pairing phase transition in an odd–even hot 69Zn nucleus
The pairing phase transition in an odd–even hot-rotating 69Zn nucleus has been investigated by using the reported nuclear level density (NLD) data, which were experimentally extracted from the γ-gated particle spectra. The experimental NLDs have been compared with those obtained within the microscopic exact pairing plus independent-particle model at finite temperature (EP+IPM) along with the results of other microscopic calculations such as the Hartree–Fock BCS (HFBCS) and Hartree–Fock–Bogoliubov plus combinational (HFBC) methods. It is found that the experimental NLDs can be well described by the EP+IPM using the recommended quadrupole deformation parameter β 2 = −0.164. Intriguingly, the heat capacity calculated using the EP+IPM NLD exhibits a sharp S-shape, which is not expected in such odd–even hot or hot-rotating system as reported earlier. Changing the deformation parameter β 2 does not change much this S-shape. However, increasing or decreasing the pairing gaps could enhance or destroy the S-shaped heat capacity. Therefore, the S-shaped heat capacity in odd–even 69Zn nucleus is explained due to the deformation-induced pairing correlation.
- 2 June 2023
- Published by IOP Publishing in Journal of Physics G: Nuclear and Particle Physics
- Vol. 50 (7) , 075104
Pairing phase transition in an odd–even hot 69Zn nucleus
The pairing phase transition in an odd–even hot-rotating 69Zn nucleus has been investigated by using the reported nuclear level density (NLD) data, which were experimentally extracted from the γ-gated particle spectra. The experimental NLDs have been compared with those obtained within the microscopic exact pairing plus independent-particle model at finite temperature (EP+IPM) along with the results of other microscopic calculations such as the Hartree–Fock BCS (HFBCS) and Hartree–Fock–Bogoliubov plus combinational (HFBC) methods. It is found that the experimental NLDs can be well described by the EP+IPM using the recommended quadrupole deformation parameter β 2 = −0.164. Intriguingly, the heat capacity calculated using the EP+IPM NLD exhibits a sharp S-shape, which is not expected in such odd–even hot or hot-rotating system as reported earlier. Changing the deformation parameter β 2 does not change much this S-shape. However, increasing or decreasing the pairing gaps could enhance or destroy the S-shaped heat capacity. Therefore, the S-shaped heat capacity in odd–even 69Zn nucleus is explained due to the deformation-induced pairing correlation.
- 18 May 2023
- Published by Taylor & Francis
- p. 23-38
A Fuzzy-based Group Decision-making Approach for Supplier Selection
Nowadays, proper supplier selection is a very important strategic concern in any supply chain management. Due to vagueness, ambiguity, and imprecise information regarding alternative suppliers with a constantly varying nature of selection criteria, proper decision-making becomes challenging. This chapter applies a fuzzy multiple-criteria homogeneous group decision-making process for performance evaluation and selection of suppliers in supply chain management (SCM). In this method, a homogeneous decision-making committee is formed to assess the alternatives and the criteria weight in terms of raw linguistic expression. These linguistic expressions are converted into equivalent triangular fuzzy numbers. Normalization of performance ratings is carried out, and a weighted normalized performance rating is determined by combining the rating and their respective weights. Fuzzy multi-objective optimization by ratio analysis (FMOORA) and fuzzy gray theory (FGT) methods are independently employed to calculate the net score and gray relation grade for each alternative to provide appropriate decision-making. A suitable numerical example is chosen for illustration of the approach. A comparative study on the results is conducted, and the best supplier is selected. The study indicates the applicability and effectiveness of the approach enunciated in the chapter.
- 18 May 2023
- Published by Taylor & Francis
- p. 23-38
A Fuzzy-based Group Decision-making Approach for Supplier Selection
Nowadays, proper supplier selection is a very important strategic concern in any supply chain management. Due to vagueness, ambiguity, and imprecise information regarding alternative suppliers with a constantly varying nature of selection criteria, proper decision-making becomes challenging. This chapter applies a fuzzy multiple-criteria homogeneous group decision-making process for performance evaluation and selection of suppliers in supply chain management (SCM). In this method, a homogeneous decision-making committee is formed to assess the alternatives and the criteria weight in terms of raw linguistic expression. These linguistic expressions are converted into equivalent triangular fuzzy numbers. Normalization of performance ratings is carried out, and a weighted normalized performance rating is determined by combining the rating and their respective weights. Fuzzy multi-objective optimization by ratio analysis (FMOORA) and fuzzy gray theory (FGT) methods are independently employed to calculate the net score and gray relation grade for each alternative to provide appropriate decision-making. A suitable numerical example is chosen for illustration of the approach. A comparative study on the results is conducted, and the best supplier is selected. The study indicates the applicability and effectiveness of the approach enunciated in the chapter.
- 24 February 2023
- Published by Springer Nature
- p. 1-4
Introduction