Çağdaş Oto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Çağdaş Oto has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Barış Batur
Department of Anatomy, Faculty of Veterinary Medicine, Ankara University, 06110 Ankara, Türkiye
4 shared publications - Caner Bakici
Ankara University, Faculty of Veterinary Medicine, Department of Anatomy
4 shared publications - Aytaç Akçay
Department of Biostatistics, Faculty of Veterinary Medicine, Ankara University, Ankara, Türkiye
2 shared publications - Ezgi Deniz Mavili
ANKARA UNIVERSITY, ANKARA FACULTY OF VETERINARY MEDICINE, VETERINARY MEDICINE PR
2 shared publications - Hasen Awel Yunus
ANKARA UNIVERSITY, ANKARA FACULTY OF VETERINARY MEDICINE
2 shared publications - Okan Eki̇m
Veterinary Anatomy, Faculty of Veterinary Medicine, Ankara University, Dışkapı, 06110, Ankara, Türkiye
2 shared publications
Latest Publications
- Open Access
- 15 June 2026
- Published by Veteriner Hekimler Dernegi Dergisi in Veteriner Hekimler Derneği Dergisi
- Vol. 97 (2) , 161-174
3D Modeling and volumetric analysis of skull cavities in different canine skull types
The canine skull exhibits remarkable morphological diversity due to selective breeding, resulting in distinct variations in internal cavity volume. This study aims to evaluate the volumetric distribution and ratios of the cranial cavity (CC), nasal cavity (NC), and sinus cavity (SC) across different skull types - dolichocephalic, mesocephalic, and brachycephalic - from a clinical anatomy perspective. Twenty-one canine skulls obtained from the Ankara University Faculty of Veterinary Medicine, Department of Anatomy, were analyzed using computed tomography (CT) imaging and 3D Slicer software for volumetric reconstruction. Additionally, physical replicas were produced using FDM-based 3D printing technology to evaluate their potential as educational and surgical planning tools. Statistical analysis revealed significant differences in the CC/NC (p=0.014) and CC/SC (p=0.009) ratios, with brachycephalic dogs exhibiting a relatively larger cranial cavity in proportion to their nasal cavity. Conversely, no significant difference in the NC/SC ratio was detected among the morphotypes (p=0.287), suggesting a constant proportional relationship between the nasal and sinus cavities regardless of skull shape. These findings provide quantitative confirmation of the anatomical respiratory constraints in brachycephalic breeds, characterized by a significant reduction in nasal cavity volume. The study concludes that 3D-modeled volumetric ratios can provide objective breed-specific pathologies and that 3D-printed models can serve as effective tactile tools in veterinary medical education and virtual surgical planning.
- 15 June 2026
- Published by Veteriner Hekimler Dernegi Dergisi in Veteriner Hekimler Derneği Dergisi
- Vol. 97 (2) , 161-174
Open Access3D Modeling and volumetric analysis of skull cavities in different canine skull types
The canine skull exhibits remarkable morphological diversity due to selective breeding, resulting in distinct variations in internal cavity volume. This study aims to evaluate the volumetric distribution and ratios of the cranial cavity (CC), nasal cavity (NC), and sinus cavity (SC) across different skull types - dolichocephalic, mesocephalic, and brachycephalic - from a clinical anatomy perspective. Twenty-one canine skulls obtained from the Ankara University Faculty of Veterinary Medicine, Department of Anatomy, were analyzed using computed tomography (CT) imaging and 3D Slicer software for volumetric reconstruction. Additionally, physical replicas were produced using FDM-based 3D printing technology to evaluate their potential as educational and surgical planning tools. Statistical analysis revealed significant differences in the CC/NC (p=0.014) and CC/SC (p=0.009) ratios, with brachycephalic dogs exhibiting a relatively larger cranial cavity in proportion to their nasal cavity. Conversely, no significant difference in the NC/SC ratio was detected among the morphotypes (p=0.287), suggesting a constant proportional relationship between the nasal and sinus cavities regardless of skull shape. These findings provide quantitative confirmation of the anatomical respiratory constraints in brachycephalic breeds, characterized by a significant reduction in nasal cavity volume. The study concludes that 3D-modeled volumetric ratios can provide objective breed-specific pathologies and that 3D-printed models can serve as effective tactile tools in veterinary medical education and virtual surgical planning.
- Open Access
- 29 March 2026
- Published by Van Veterinary Journal in Van Veterinary Journal
- Vol. 37 (1) , 44-53
A Retrospective Study on the Effects of Face-to-Face and Online Teaching Methods on Student Performance in Veterinary Anatomy Education
The Coronavirus Disease 2019 (COVID-19) pandemic triggered a rapid shift from face-to-face to online learning, significantly impacting anatomy education, which relies heavily on practical training. This retrospective study evaluated the effects of face-to-face, online, and hybrid teaching on student performance in Anatomy-I and Anatomy-II courses in Turkish and English veterinary programs at Ankara University from 2017 to 2021. A total of 1.496 students (Turkish: 1.253; English: 243) were included, with academic years categorized as pre-pandemic, acute pandemic, and prolonged pandemic. Performance was analyzed using Chi-square, t-tests, Kappa agreement, and odds ratios. Results showed higher success rates in online Anatomy-II courses, especially in 2020–2021. Anatomy-I outcomes varied, and female students consistently outperformed male students. The hybrid model produced mixed results. Online education, when well-structured, was as effective as traditional methods. Future anatomy education should adopt hybrid models that combine digital flexibility with essential in-person practice.
- 29 March 2026
- Published by Van Veterinary Journal in Van Veterinary Journal
- Vol. 37 (1) , 44-53
Open AccessA Retrospective Study on the Effects of Face-to-Face and Online Teaching Methods on Student Performance in Veterinary Anatomy Education
The Coronavirus Disease 2019 (COVID-19) pandemic triggered a rapid shift from face-to-face to online learning, significantly impacting anatomy education, which relies heavily on practical training. This retrospective study evaluated the effects of face-to-face, online, and hybrid teaching on student performance in Anatomy-I and Anatomy-II courses in Turkish and English veterinary programs at Ankara University from 2017 to 2021. A total of 1.496 students (Turkish: 1.253; English: 243) were included, with academic years categorized as pre-pandemic, acute pandemic, and prolonged pandemic. Performance was analyzed using Chi-square, t-tests, Kappa agreement, and odds ratios. Results showed higher success rates in online Anatomy-II courses, especially in 2020–2021. Anatomy-I outcomes varied, and female students consistently outperformed male students. The hybrid model produced mixed results. Online education, when well-structured, was as effective as traditional methods. Future anatomy education should adopt hybrid models that combine digital flexibility with essential in-person practice.
- Open Access
- 15 January 2026
- Published by Veteriner Hekimler Dernegi Dergisi in Veteriner Hekimler Derneği Dergisi
- Vol. 97 (1) , 47-51
A comparative evaluation of AI chatbots in veterinary anatomy: performance of ChatGPT, Gemini and DeepSeek models
This study aimed to evaluate the reliability and accuracy of four AI chatbots—ChatGPT-3.5, ChatGPT-4.0, Gemini 2.5 Flash, and DeepSeek-V3—in the field of veterinary anatomy. A total of 85 multiple-choice questions encompassing major anatomical systems were presented individually to each model under identical conditions. Responses were evaluated for accuracy, and success rates were calculated as percentages. Statistical differences among models were analyzed using the Pearson chi-square test (p
- 15 January 2026
- Published by Veteriner Hekimler Dernegi Dergisi in Veteriner Hekimler Derneği Dergisi
- Vol. 97 (1) , 47-51
Open AccessA comparative evaluation of AI chatbots in veterinary anatomy: performance of ChatGPT, Gemini and DeepSeek models
This study aimed to evaluate the reliability and accuracy of four AI chatbots—ChatGPT-3.5, ChatGPT-4.0, Gemini 2.5 Flash, and DeepSeek-V3—in the field of veterinary anatomy. A total of 85 multiple-choice questions encompassing major anatomical systems were presented individually to each model under identical conditions. Responses were evaluated for accuracy, and success rates were calculated as percentages. Statistical differences among models were analyzed using the Pearson chi-square test (p
- 4 October 2025
- Published by Elsevier in The Veterinary Journal
- Vol. 314, 106460
Evaluating the effectiveness of 3D-printed bone models as educational tools in veterinary anatomy: Insights from students and teachers
- 4 October 2025
- Published by Elsevier in The Veterinary Journal
- Vol. 314, 106460
Evaluating the effectiveness of 3D-printed bone models as educational tools in veterinary anatomy: Insights from students and teachers
- Open Access
- 1 March 2025
- Published by IOP Publishing in Biomedical Materials
- Vol. 20 (2) , 022012
Hand-held bioprinters assisting in situ bioprinting
Bioprinting, an advanced additive manufacturing technology, enables the fabrication of complex, viable three-dimensional (3D) tissues using bioinks composed of biomaterials and cells. This technology has transformative applications in regenerative medicine, drug screening, disease modeling, and biohybrid robotics. In particular, in situ bioprinting has emerged as a promising approach for directly repairing damaged tissues or organs at the defect site. Unlike traditional 3D bioprinting, which is confined to flat surfaces and require complex equipment, in situ techniques accommodate irregular geometries, dynamic environments and simple apparatus, offering greater versatility for clinical applications. In situ bioprinting via hand-held devices prioritize flexibility, portability, and real-time adaptability while allowing clinicians to directly deposit bioinks in anatomically complex areas, making them cost-effective, accessible, and suitable for diverse environments, including field surgeries. This review explores the principles, advancements, and comparative advantages of robotic and hand-held in situ bioprinting, emphasizing their clinical relevance. While robotic systems excel in precision and scalability, hand-held bioprinters offer unparalleled flexibility, affordability, and ease of use, making them a valuable tool for personalized and minimally invasive tissue engineering. Future research should focus on improving biosafety, aseptic properties, and bioink formulations to optimize these technologies for widespread clinical adoption.
- 1 March 2025
- Published by IOP Publishing in Biomedical Materials
- Vol. 20 (2) , 022012
Open AccessHand-held bioprinters assisting in situ bioprinting
Bioprinting, an advanced additive manufacturing technology, enables the fabrication of complex, viable three-dimensional (3D) tissues using bioinks composed of biomaterials and cells. This technology has transformative applications in regenerative medicine, drug screening, disease modeling, and biohybrid robotics. In particular, in situ bioprinting has emerged as a promising approach for directly repairing damaged tissues or organs at the defect site. Unlike traditional 3D bioprinting, which is confined to flat surfaces and require complex equipment, in situ techniques accommodate irregular geometries, dynamic environments and simple apparatus, offering greater versatility for clinical applications. In situ bioprinting via hand-held devices prioritize flexibility, portability, and real-time adaptability while allowing clinicians to directly deposit bioinks in anatomically complex areas, making them cost-effective, accessible, and suitable for diverse environments, including field surgeries. This review explores the principles, advancements, and comparative advantages of robotic and hand-held in situ bioprinting, emphasizing their clinical relevance. While robotic systems excel in precision and scalability, hand-held bioprinters offer unparalleled flexibility, affordability, and ease of use, making them a valuable tool for personalized and minimally invasive tissue engineering. Future research should focus on improving biosafety, aseptic properties, and bioink formulations to optimize these technologies for widespread clinical adoption.
- 15 June 2024
- Published by Veteriner Hekimler Dernegi Dergisi in Veteriner Hekimler Derneği Dergisi
- Vol. 95 (2) , 149-157
Exploring the morphology of the glandula uropygialis in Denizli rooster: 3 tesla MRI and histological investigation
The aim of this study was to examine the preen gland (uropygial gland) of Denizli rooster, an endemic species for Turkey, both macroscopic and by magnetic resonance imaging and to present its histological formation. Five adult male subjects were used for this study. Although some of the findings of the preen gland in Denizli rooster were quite similar to the previous studies on the various avian species, widely branching secondary sinuses of the both two lobes of the gland were formed different from those. It was observed that the sinuses of these two lobes were connected to each other by forming passageway at the isthmus region of the gland. MR images showed bright white hyper-echoic features due to high fat secretion of the preen gland. Therefore, it was determined that the preen gland could be easily isolated from the surrounding tissues. It was also observed in the MR images that the gland in the Denizli cock has a pair of symmetrical bilateral lobes and is located on both sides. This connection gave rise to thought that the problems occurred by the blockage of the one of the primary canals can be solved by the compensation of another canal connected through this passageway. Thus, the secretion of the gland could be maintained properly.
- 15 June 2024
- Published by Veteriner Hekimler Dernegi Dergisi in Veteriner Hekimler Derneği Dergisi
- Vol. 95 (2) , 149-157
Exploring the morphology of the glandula uropygialis in Denizli rooster: 3 tesla MRI and histological investigation
The aim of this study was to examine the preen gland (uropygial gland) of Denizli rooster, an endemic species for Turkey, both macroscopic and by magnetic resonance imaging and to present its histological formation. Five adult male subjects were used for this study. Although some of the findings of the preen gland in Denizli rooster were quite similar to the previous studies on the various avian species, widely branching secondary sinuses of the both two lobes of the gland were formed different from those. It was observed that the sinuses of these two lobes were connected to each other by forming passageway at the isthmus region of the gland. MR images showed bright white hyper-echoic features due to high fat secretion of the preen gland. Therefore, it was determined that the preen gland could be easily isolated from the surrounding tissues. It was also observed in the MR images that the gland in the Denizli cock has a pair of symmetrical bilateral lobes and is located on both sides. This connection gave rise to thought that the problems occurred by the blockage of the one of the primary canals can be solved by the compensation of another canal connected through this passageway. Thus, the secretion of the gland could be maintained properly.
- 15 June 2024
- Published by Veteriner Hekimler Dernegi Dergisi in Veteriner Hekimler Derneği Dergisi
- Vol. 95 (2) , 96-103
3d printing of skull models in horse, ox and pig
In this study, it was aimed to physically create skull models of large-sized animal sample horse, cattle and pig species used in veterinary anatomy education with three-dimensional printing technology and to determine the suitability of these models anatomically. The anatomical structures on the skull models obtained for this purpose were examined comparatively and the advantages and disadvantages of the models in terms of their usability in education were revealed. For the study, 3D reconstruction and segmentation processes were performed digitally on the cross-sectional images of horse, cattle and pig skulls obtained by computed tomography scanning and printed. Anatomical structures were comparatively analyzed on the produced 3d plastic replicas and organic skulls. Anatomical accuracy of the 3d models, printing quality, printing errors, advantages and disadvantages were evaluated. Plastic models were found to be approximately 45% lighter than organic models in horses, 55% lighter in cattle and 60% lighter in pigs. The weight (g)/printing time (s) ratio was calculated as 11.8 for equine skull models, 12.7 for bovine models and 7.4 for porcine models. It was determined that the anatomical accuracy of the models was at a high level, important anatomical structures could be printed in accordance with the original skulls, and only some sutures between the skull bones and holes with a diameter of less than 2 mm could not be clearly visualized due to scanning and printing quality. As a result, it was determined that the plastic replicas obtained can be used in veterinary anatomy education in terms of anatomical accuracy, as well as important advantages such as being lighter, more resistant to effects such as falling, impact, cleaning, easy storage, low cost, reprinting when necessary and making corrections on the model.
- 15 June 2024
- Published by Veteriner Hekimler Dernegi Dergisi in Veteriner Hekimler Derneği Dergisi
- Vol. 95 (2) , 96-103
3d printing of skull models in horse, ox and pig
In this study, it was aimed to physically create skull models of large-sized animal sample horse, cattle and pig species used in veterinary anatomy education with three-dimensional printing technology and to determine the suitability of these models anatomically. The anatomical structures on the skull models obtained for this purpose were examined comparatively and the advantages and disadvantages of the models in terms of their usability in education were revealed. For the study, 3D reconstruction and segmentation processes were performed digitally on the cross-sectional images of horse, cattle and pig skulls obtained by computed tomography scanning and printed. Anatomical structures were comparatively analyzed on the produced 3d plastic replicas and organic skulls. Anatomical accuracy of the 3d models, printing quality, printing errors, advantages and disadvantages were evaluated. Plastic models were found to be approximately 45% lighter than organic models in horses, 55% lighter in cattle and 60% lighter in pigs. The weight (g)/printing time (s) ratio was calculated as 11.8 for equine skull models, 12.7 for bovine models and 7.4 for porcine models. It was determined that the anatomical accuracy of the models was at a high level, important anatomical structures could be printed in accordance with the original skulls, and only some sutures between the skull bones and holes with a diameter of less than 2 mm could not be clearly visualized due to scanning and printing quality. As a result, it was determined that the plastic replicas obtained can be used in veterinary anatomy education in terms of anatomical accuracy, as well as important advantages such as being lighter, more resistant to effects such as falling, impact, cleaning, easy storage, low cost, reprinting when necessary and making corrections on the model.
- 1 January 2022
- Published by Veterinary Journal of Ankara University in Ankara Üniversitesi Veteriner Fakültesi Dergisi
- Vol. 69 (1) , 111-117
3D Printing in Veterinary Medicine
The use of 3D printing technology in the field of medicine, which started with the millennium, continues to increase today. Depending on the technological developments in this field, the use of rapid prototyping technology in the field of veterinary medicine is becoming widespread with the development of 3D printers, increasing material variety, cheaper printing costs and being more accessible. Additive manufacturing is used in veterinary education and training, experimental research and clinical studies, and its area of use is expanding day by day. In this review, both the current usage potential will be evaluated and the expected developments in the near future will be revealed.
- 1 January 2022
- Published by Veterinary Journal of Ankara University in Ankara Üniversitesi Veteriner Fakültesi Dergisi
- Vol. 69 (1) , 111-117
3D Printing in Veterinary Medicine
The use of 3D printing technology in the field of medicine, which started with the millennium, continues to increase today. Depending on the technological developments in this field, the use of rapid prototyping technology in the field of veterinary medicine is becoming widespread with the development of 3D printers, increasing material variety, cheaper printing costs and being more accessible. Additive manufacturing is used in veterinary education and training, experimental research and clinical studies, and its area of use is expanding day by day. In this review, both the current usage potential will be evaluated and the expected developments in the near future will be revealed.
- 15 June 2021
- Published by Veteriner Hekimler Dernegi Dergisi in Veteriner Hekimler Derneği Dergisi
- Vol. 92 (2) , 152-158
At parmak iskeletinin 3B baskı ile modellenmesi
Veterinary anatomy education has become a field where theoretical knowledge has dominated considerably in general. Due to the limited amount of educational material and the presence of different kinds of animals, practical education remains in the background. The study is to point out the three dimensional (3D) printing models of the digital skeleton of the horse with all advantages and disadvantages such as anatomical accuracy, accessibility, and cost in veterinary anatomy. The proximal, middle, and distal phalanx of four horses were used. Bone samples were scanned using a multidetector computed tomography device. These images were processed with various software to rendering the 3D bone digital models. After the segmentation process was made, a fused deposition modeling printer and the polylactic acid filament were used to obtain 3D printing models. The proximal, middle, and distal phalanx were successfully printed. All samples were determined to preserve anatomical structures in high detail for veterinary anatomy education. The processes of 3D printing technology are considered to be advantageous in terms of cost, workload, and time. The process presented in this study can be applied widely to produce various bone models for veterinary anatomy education.
- 15 June 2021
- Published by Veteriner Hekimler Dernegi Dergisi in Veteriner Hekimler Derneği Dergisi
- Vol. 92 (2) , 152-158
At parmak iskeletinin 3B baskı ile modellenmesi
Veterinary anatomy education has become a field where theoretical knowledge has dominated considerably in general. Due to the limited amount of educational material and the presence of different kinds of animals, practical education remains in the background. The study is to point out the three dimensional (3D) printing models of the digital skeleton of the horse with all advantages and disadvantages such as anatomical accuracy, accessibility, and cost in veterinary anatomy. The proximal, middle, and distal phalanx of four horses were used. Bone samples were scanned using a multidetector computed tomography device. These images were processed with various software to rendering the 3D bone digital models. After the segmentation process was made, a fused deposition modeling printer and the polylactic acid filament were used to obtain 3D printing models. The proximal, middle, and distal phalanx were successfully printed. All samples were determined to preserve anatomical structures in high detail for veterinary anatomy education. The processes of 3D printing technology are considered to be advantageous in terms of cost, workload, and time. The process presented in this study can be applied widely to produce various bone models for veterinary anatomy education.
- 1 December 2010
- Published by Medwell Publications in Journal of Animal and Veterinary Advances
- Vol. 9 (20) , 2665-2667
Subgross Investigation of the Blood Vessels Originating from Aortic Arch (Arcus aortae) in Spiny Mouse
Subgross Investigation of the Blood Vessels Originating from Aortic Arch (Arcus aortae) in Spiny Mouse
- 1 December 2010
- Published by Medwell Publications in Journal of Animal and Veterinary Advances
- Vol. 9 (20) , 2665-2667
Subgross Investigation of the Blood Vessels Originating from Aortic Arch (Arcus aortae) in Spiny Mouse
Subgross Investigation of the Blood Vessels Originating from Aortic Arch (Arcus aortae) in Spiny Mouse