RWRonghui Wang

Ronghui Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ronghui Wang has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Welding Residual Stress Elimination Technique in the Top Chord of Main Truss of Steel Truss Bridge

    by Long Piao, Jianfeng Yuan, Niujing Ma, Changqi Yue, Ronghui Wang, Gangbing Zheng

    The large-amplitude fluctuations of ultrasound in high-energy ultrasonic stress relieving cause the crystal grains or lattices in the high residual stress zone to vibrate or creep alternately. This triggers secondary effects such as ultrasonic softening and dislocation movement. The sound field also produces periodic shock waves or intermittent shock waves, which form local pressure gradients at the wave front. These pressure gradients cause local heating of the grain boundary, accelerating material softening and promoting slip between grains, ultimately resulting in residual stress elimination. This technique was applied to detect the welding residual stress of the upper chord of the main truss of Sanguantang Bridge by using an ultrasonic stress meter. After the measurement, it was found that the welding residual stress in some areas was too large, and the welding residual stress needed to be eliminated. The welding seam was re-inspected after the residual stress relief operation was completed. The test results showed a maximum reduction rate of 63.91% and an average overall reduction rate ranging from 24.52% to 37.23%. The reduction effect is more significant in areas with higher welding residual stress.


  • Experimental Research on Shear Connectors' Stress of Composite Beam Bridge under Complex Stress Condition

    by Shibo Zhang, Ronghui Wang, Junping Zhang, Lingling Gong

    In order to study the mechanical properties of shear connectors for a composite beam under complex stress conditions, two 1:2 reduced-scale model tests with different types of shear connectors are conducted. These models are designed base on a real composite beam bridge in Guangzhou. Comparative analysis about the relative slipping on the steel-concrete interface of the rigid shear connector model and flexible shear connector model under the same boundary conditions is studied in detail. Responses of two types of shear connectors under three different load cases are also compared. The model test results show that the ultimate bearing capacity of concrete is the key factor of relative slipping on the steel-concrete interface and differences between rigid and flexible shear connectors are large. It is useful as references for future research and designs of shear connectors in composite beams.