Ondrej Kudlacek
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ondrej Kudlacek has a total of 195 co-authors. Here are the top co-authors by number of shared publications:
- Bernhard Sieglin
Max Planck Institute for Plasma Physics
5 shared publications - Olivier Sauter
École Polytechnique Fédérale de Lausanne (EPFL), Swiss Plasma Center (SPC)
4 shared publications - Peter Thomas Lang
Max-Planck-Institut für Plasmaphysik
4 shared publications - Wolfgang Treutterer
Max-Planck-Institut für Plasmaphysik, 85748 Garching, Germany
4 shared publications - D. Kropackova
Czech Technical University
3 shared publications D. Weldon
3 shared publications
Latest Publications
- Open Access
- 27 October 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 67 (1) , 016015
Performance optimisation of tokamak operation in ASDEX Upgrade through novel feedback control capabilities
Optimising the performance of tokamak operation is not only a matter of tuning individual control loops, but needs a holistic approach with a focus on the effective interplay of all control system components. The ASDEX Upgrade Discharge Control System (DCS) has enabled outstanding results of physics effect studies and operation scenario development. This is facilitated by efficient and highly robust algorithms for measurements data processing and plasma state estimation, a versatile feedback control suite, a powerful actuator management approach that optimises the utilisation of the limited number of actuators, and pulse supervision control reacting to events and plasma state conditions to achieve a maximum exploitation of the pulse and protect device and investment. Moreover, Fenix, a fast ‘flight simulator’ with a full model of the control system and a control-oriented plasma and plant model, assists in scenario design, validation and control method development, thus accelerating the turnaround time from the design of emerging capabilities to their exploitation in plasma pulses. Larger and more complex fusion devices such as ITER and DEMO in particular, will benefit from such a control structure and active contributions are being made to the architectural design of their control systems.
- 27 October 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 67 (1) , 016015
Open AccessPerformance optimisation of tokamak operation in ASDEX Upgrade through novel feedback control capabilities
Optimising the performance of tokamak operation is not only a matter of tuning individual control loops, but needs a holistic approach with a focus on the effective interplay of all control system components. The ASDEX Upgrade Discharge Control System (DCS) has enabled outstanding results of physics effect studies and operation scenario development. This is facilitated by efficient and highly robust algorithms for measurements data processing and plasma state estimation, a versatile feedback control suite, a powerful actuator management approach that optimises the utilisation of the limited number of actuators, and pulse supervision control reacting to events and plasma state conditions to achieve a maximum exploitation of the pulse and protect device and investment. Moreover, Fenix, a fast ‘flight simulator’ with a full model of the control system and a control-oriented plasma and plant model, assists in scenario design, validation and control method development, thus accelerating the turnaround time from the design of emerging capabilities to their exploitation in plasma pulses. Larger and more complex fusion devices such as ITER and DEMO in particular, will benefit from such a control structure and active contributions are being made to the architectural design of their control systems.
- Open Access
- 15 October 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (12) , 126051
Applications of a novel model-based real-time observer for electron density profile control experiments in TCV
Real-time estimation and control of the electron plasma density profile is fundamental for monitoring and regulating particle confinement, fusion power, heating efficiency, exhaust performance, impurity concentration, and proximity to the density limit (Greenwald et al Nucl. Fusion 28 2199–207) in present and future tokamaks. This work presents the experimental applications of a multi-rate electron density observer (Pastore Fusion Eng. Des. 192 113615) based on RAPDENS (Blanken Fusion Eng. Des. 126 87–103), integrated into the TCV plasma control system, to control the density profile in a range of plasma scenarios relevant to future fusion power plants. Three main experimental contributions are reported. First, the observer enables control of the line-averaged electron density within the last-closed flux surface ( NEL LCFS ) in ohmic, nitrogen-seeded plasmas with alternative divertor geometries, decoupling upstream density from scrape-off layer pickup in the interferometer signal—a limitation of the traditional control scheme. Second, local control of the central electron density below the ECH cutoff is demonstrated in L-mode plasmas with mixed ECH and neutral beam injection heating, where auxiliary-heating-induced profile peaking is treated as a disturbance to the control task. Real-time estimation and adjustment of the electron pinch velocity-to-diffusivity ratio ν / D improves the spatial accuracy of the profile reconstruction, especially in the core region. The underlying turbulent transport in this scenario is characterised via linear and non-linear gyrokinetic simulations with GENE, confirming quantitatively a TEM-dominated pumpout regime during ECH, which affects the amount of gas flux needed to sustain the target density reference. Last, simultaneous control of the edge-normalised density fraction and toroidal beta is demonstrated in high-performance H-mode plasmas ( β N ≈ 2.15 , f GW ≈ 0.80 ), yielding reproducible scenarios with a device-agnostic density metric and robust handling of interferometer fringe jumps.
- 15 October 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (12) , 126051
Open AccessApplications of a novel model-based real-time observer for electron density profile control experiments in TCV
Real-time estimation and control of the electron plasma density profile is fundamental for monitoring and regulating particle confinement, fusion power, heating efficiency, exhaust performance, impurity concentration, and proximity to the density limit (Greenwald et al Nucl. Fusion 28 2199–207) in present and future tokamaks. This work presents the experimental applications of a multi-rate electron density observer (Pastore Fusion Eng. Des. 192 113615) based on RAPDENS (Blanken Fusion Eng. Des. 126 87–103), integrated into the TCV plasma control system, to control the density profile in a range of plasma scenarios relevant to future fusion power plants. Three main experimental contributions are reported. First, the observer enables control of the line-averaged electron density within the last-closed flux surface ( NEL LCFS ) in ohmic, nitrogen-seeded plasmas with alternative divertor geometries, decoupling upstream density from scrape-off layer pickup in the interferometer signal—a limitation of the traditional control scheme. Second, local control of the central electron density below the ECH cutoff is demonstrated in L-mode plasmas with mixed ECH and neutral beam injection heating, where auxiliary-heating-induced profile peaking is treated as a disturbance to the control task. Real-time estimation and adjustment of the electron pinch velocity-to-diffusivity ratio ν / D improves the spatial accuracy of the profile reconstruction, especially in the core region. The underlying turbulent transport in this scenario is characterised via linear and non-linear gyrokinetic simulations with GENE, confirming quantitatively a TEM-dominated pumpout regime during ECH, which affects the amount of gas flux needed to sustain the target density reference. Last, simultaneous control of the edge-normalised density fraction and toroidal beta is demonstrated in high-performance H-mode plasmas ( β N ≈ 2.15 , f GW ≈ 0.80 ), yielding reproducible scenarios with a device-agnostic density metric and robust handling of interferometer fringe jumps.
- Open Access
- 6 October 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (12) , 126038
Extension of the RAPDENS control-oriented model with a scrape-off layer particle balance model for ASDEX Upgrade and ITER
The plasma density is a key parameter in tokamak operation, as it influences plasma performance and stability. Hence, accurate real-time (RT) estimation and control are essential. RT estimation of the plasma electron density profile can be maintained even in the presence of corrupted or unavailable diagnostics by employing model-based electron density observers. This work extends one of these observers, RAPDENS (Blanken Fusion Eng. Des. 126 87–103 2018), by incorporating a heuristic scrape-off layer model capable of predicting the separatrix electron density, thereby building upon previous work that implemented a non-zero boundary condition at the separatrix (Kropackova Fusion Eng. Des. 219 115196 2025). Implementations for both ASDEX Upgrade (AUG) and ITER are presented. For AUG, the RAPDENS adaptation is tested using offline Extended Kalman Filter simulations of existing AUG discharges. These simulations show that RAPDENS is capable of providing a reasonable reconstruction of the electron density profile, supporting its future RT implementation and routine use at AUG. For ITER, the implementation is based on and compared against results of a high-fidelity simulation performed with JINTRAC, the integrated modeling suite, for a start of research operation ramp-up scenario, concluding that the improved version of RAPDENS can be used for ITER density controller design.
- 6 October 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (12) , 126038
Open AccessExtension of the RAPDENS control-oriented model with a scrape-off layer particle balance model for ASDEX Upgrade and ITER
The plasma density is a key parameter in tokamak operation, as it influences plasma performance and stability. Hence, accurate real-time (RT) estimation and control are essential. RT estimation of the plasma electron density profile can be maintained even in the presence of corrupted or unavailable diagnostics by employing model-based electron density observers. This work extends one of these observers, RAPDENS (Blanken Fusion Eng. Des. 126 87–103 2018), by incorporating a heuristic scrape-off layer model capable of predicting the separatrix electron density, thereby building upon previous work that implemented a non-zero boundary condition at the separatrix (Kropackova Fusion Eng. Des. 219 115196 2025). Implementations for both ASDEX Upgrade (AUG) and ITER are presented. For AUG, the RAPDENS adaptation is tested using offline Extended Kalman Filter simulations of existing AUG discharges. These simulations show that RAPDENS is capable of providing a reasonable reconstruction of the electron density profile, supporting its future RT implementation and routine use at AUG. For ITER, the implementation is based on and compared against results of a high-fidelity simulation performed with JINTRAC, the integrated modeling suite, for a start of research operation ramp-up scenario, concluding that the improved version of RAPDENS can be used for ITER density controller design.
- Open Access
- 16 September 2026
- Published by Elsevier in Fusion Engineering and Design
- Vol. 233
Extensions to the ITER actuator management architecture for dynamic actuator allocation and pellet system reconfiguration
- 16 September 2026
- Published by Elsevier in Fusion Engineering and Design
- Vol. 233
Open AccessExtensions to the ITER actuator management architecture for dynamic actuator allocation and pellet system reconfiguration
- Open Access
- 29 July 2026
- Published by Elsevier in Fusion Engineering and Design
- Vol. 231
A Mixed-Integer Linear Programming framework for real-time actuator allocation in tokamak control
- 29 July 2026
- Published by Elsevier in Fusion Engineering and Design
- Vol. 231
Open AccessA Mixed-Integer Linear Programming framework for real-time actuator allocation in tokamak control
- Open Access
- 2 March 2026
- Published by Taylor & Francis in Fusion Science and Technology
- p. 1-13
Real-Time Pellet Ablation Radiation Monitoring for Refined Plasma Core Density Control in ASDEX Upgrade
I. Efficient and reliable core density control is a key requirement in a future fusion reactor. In e.g., EU-DEMO, the designated technical solution relies entirely on the injection of pellets, mill...
- 2 March 2026
- Published by Taylor & Francis in Fusion Science and Technology
- p. 1-13
Open AccessReal-Time Pellet Ablation Radiation Monitoring for Refined Plasma Core Density Control in ASDEX Upgrade
I. Efficient and reliable core density control is a key requirement in a future fusion reactor. In e.g., EU-DEMO, the designated technical solution relies entirely on the injection of pellets, mill...
- 23 February 2026
- Published by Elsevier in Fusion Engineering and Design
- Vol. 226
Systematic commissioning of the Plasma Control System for ITER Start of Research Operation
- 23 February 2026
- Published by Elsevier in Fusion Engineering and Design
- Vol. 226
Systematic commissioning of the Plasma Control System for ITER Start of Research Operation
- Top Cited PapersOpen Access
- 4 September 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (10) , 103001
MHD, disruptions and control physics: Chapter 4 of the special issue: on the path to tokamak burning plasma operation
In this chapter, we review the progress in MHD stability, disruptions and control in magnetic fusion research that has occurred over the past (more than) one and a half decades since the publication by Hender et al in 2007 on the same topic as part of the update of ITER Physics Basis. During this period, remarkable progress has been achieved in the understanding of the basic physics and overall control of MHD instabilities through a wide spectrum of dedicated experiments, theory and modeling. The sawtooth activities are probably today one of the best understood of MHD events and very robust control schemes have been developed for reliable operation of tokamaks through core heating. Similarly, significant improvements have been achieved in understanding and control of neoclassical tearing modes, resistive wall modes or locked modes and their control through ECCD or error field control. The field of disruption prediction through application of artificial intelligence, machine learning or deep learning methods, which had already started at the time of the 2007 review, has progressed significantly due to general progress in these fields and application of newer, more sophisticated algorithms. However, although remarkable progress has been achieved in the field of Disruptions, their understanding, prediction, possible avoidance and mitigation still remain probably the most active fields of R&D globally in this field. This is especially because reactor grade machines like ITER and DEMO will be much less tolerant in respect of disruptions and runaway currents, and their occurrences must be either avoided altogether or minimized to an acceptable value without causing any significant hindrance to robust machine operations. This review is intended to present a broad spectrum of the R&D that has occurred in this field in support of ITER, which will also be of immense significance for all future machines, especially reactors like DEMO.
- 4 September 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (10) , 103001
Top Cited PapersOpen AccessMHD, disruptions and control physics: Chapter 4 of the special issue: on the path to tokamak burning plasma operation
In this chapter, we review the progress in MHD stability, disruptions and control in magnetic fusion research that has occurred over the past (more than) one and a half decades since the publication by Hender et al in 2007 on the same topic as part of the update of ITER Physics Basis. During this period, remarkable progress has been achieved in the understanding of the basic physics and overall control of MHD instabilities through a wide spectrum of dedicated experiments, theory and modeling. The sawtooth activities are probably today one of the best understood of MHD events and very robust control schemes have been developed for reliable operation of tokamaks through core heating. Similarly, significant improvements have been achieved in understanding and control of neoclassical tearing modes, resistive wall modes or locked modes and their control through ECCD or error field control. The field of disruption prediction through application of artificial intelligence, machine learning or deep learning methods, which had already started at the time of the 2007 review, has progressed significantly due to general progress in these fields and application of newer, more sophisticated algorithms. However, although remarkable progress has been achieved in the field of Disruptions, their understanding, prediction, possible avoidance and mitigation still remain probably the most active fields of R&D globally in this field. This is especially because reactor grade machines like ITER and DEMO will be much less tolerant in respect of disruptions and runaway currents, and their occurrences must be either avoided altogether or minimized to an acceptable value without causing any significant hindrance to robust machine operations. This review is intended to present a broad spectrum of the R&D that has occurred in this field in support of ITER, which will also be of immense significance for all future machines, especially reactors like DEMO.
- Open Access
- 9 May 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (6) , 066006
Model-based estimation of tokamak plasma profiles and physics parameters: algorithm overview and application to ITER
Combining dynamic models and measurements into a consistent plasma state estimate is an important challenge for ITER and DEMO, due to the inherent limitations regarding diagnostic coverage in a nuclear fusion reactor environment. In this work, a model-based estimation algorithm is proposed to improve real-time and post-shot estimation of tokamak plasma profiles. The RAPTOR rapid transport solver is employed as a dynamic state observer for the parallel current density j par , the electron temperature T e and the electron density n e , applying an Extended Kalman Filter (EKF). The implementation of an EKF which, in addition to the plasma profiles, estimates model disturbances and model parameters has enabled us to account for systematic model-reality mismatches and provides an avenue to automatically validate simple transport models that are easily interpretable and machine-independent, based on raw experimental data. Estimates of transport model coefficients can be directly used to find adequate settings for launching a predictive simulation, accelerating inter-discharge scenario design. Furthermore, a method for maximum likelihood identification of model uncertainty statistics from a database of recorded measurement data is proposed. The RAPTOR EKF is tested for reconstruction of the j par , T e and n e profile evolution for an ITER Q = 10 plasma discharge, from ramp-up to ramp-down, based on synthetic Thomson scattering and boundary poloidal flux measurements, generated by adding realistic measurement noise to a DINA-JINTRAC simulation. This approach enables improved safety factor profile estimation in the absence of direct internal current density measurements.
- 9 May 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (6) , 066006
Open AccessModel-based estimation of tokamak plasma profiles and physics parameters: algorithm overview and application to ITER
Combining dynamic models and measurements into a consistent plasma state estimate is an important challenge for ITER and DEMO, due to the inherent limitations regarding diagnostic coverage in a nuclear fusion reactor environment. In this work, a model-based estimation algorithm is proposed to improve real-time and post-shot estimation of tokamak plasma profiles. The RAPTOR rapid transport solver is employed as a dynamic state observer for the parallel current density j par , the electron temperature T e and the electron density n e , applying an Extended Kalman Filter (EKF). The implementation of an EKF which, in addition to the plasma profiles, estimates model disturbances and model parameters has enabled us to account for systematic model-reality mismatches and provides an avenue to automatically validate simple transport models that are easily interpretable and machine-independent, based on raw experimental data. Estimates of transport model coefficients can be directly used to find adequate settings for launching a predictive simulation, accelerating inter-discharge scenario design. Furthermore, a method for maximum likelihood identification of model uncertainty statistics from a database of recorded measurement data is proposed. The RAPTOR EKF is tested for reconstruction of the j par , T e and n e profile evolution for an ITER Q = 10 plasma discharge, from ramp-up to ramp-down, based on synthetic Thomson scattering and boundary poloidal flux measurements, generated by adding realistic measurement noise to a DINA-JINTRAC simulation. This approach enables improved safety factor profile estimation in the absence of direct internal current density measurements.
- Open Access
- 25 April 2025
- Published by Elsevier in Fusion Engineering and Design
- Vol. 216
Actuator management for the first ITER plasma operation campaign
- 25 April 2025
- Published by Elsevier in Fusion Engineering and Design
- Vol. 216
Open AccessActuator management for the first ITER plasma operation campaign