YSYana Sanyagina

Yana Sanyagina

*This is an algorithmically generated author record based on publicly available information.

Yana Sanyagina has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Biocidal cements with active mineral additive: production and properties

    by V. В. Erofeev, A. I. Rodin, S. N. Karpushin, S. V. Samchenko, O. B. Tomilin, S. S. Gladkin, I. V. Erofeeva, Ya. A. Sanyagina, Банягина Я. А.

    Concrete and reinforced concrete structures are susceptible to the negative effects of bacteria, mycelial fungi, and actinomycetes. The purpose of this research is development of compositions of cement binders with active mineral additives for biocidal concretes creation. For biocidal cements with an active additive manufacture following components were used: Portland cement clinker produced by JSC Mordovcement, two-water gypsum of the Poretsky deposit, fly ash of the Krasnoyarsk CHP-3 and biocidal ingredients: sodium sulfate, sodium fluoride. Biocidal cements were obtained by joint grinding of mineral components and biocidal additives, then an active mineral additive was added. The physico-chemical, physico-mechanical and technological properties of the cements with an active mineral additive and composites based on them were determined in accordance with current regulatory documents. X-ray phase analysis, thermogravimetric analysis, differential thermogravimetry, calorimetry and other methods were used in this work. The features of phase transformations in cement stone are revealed depending on the type and content of biocidal ingredients, active mineral additives and hydration time. The absence of ettringite formation during hydration of cements modified with sodium fluoride and the presence of a new hydroaluminate phase have been established. The curves of TG, DTG and DTA for hydrated biocidal cement with the addition of fly ash modified with sodium sulfate are almost identical to the curves of hydrated ordinary cement. The largest amount of C-S-H gel (40 wt. %) was recorded in formulations with an active mineral additive. Based on the results of the study of normal density and setting time of the cement dough, the strength of samples of biocidal cement stone during compression and bending, regression equations were obtained, graphical dependencies were built and optimal compositions of biocidal cements were determined. Compositions of biocidal cements superior in physical and mechanical properties to ordinary Portland cements, which are recommended for the manufacture of biostable building products, have been obtained.

  • Chemical, physical, fresh and mechanical properties of modified biocidal cements

    byΒ Vladimir Erofeev, Sergey Gladkin, Aleksandr Rodin, Sergey Karpushin, Irina Erofeeva, Yana Sanyagina, Sergey Klyuev, Alexander Klyuev, Yury Liseitsev, Roman Fediuk


  • Prospects for the use of new generation concretes in winter concreting technology

    byΒ Tarakanov O. V., T. K. Akchurin, I. V. Erofeeva, Ya. A. Sanyagina, O. V. Dushko

    The expediency and effectiveness of the use of antifreeze additives in the technology of β€œcold” and β€œwarm” concrete are analyzed. Using the example of studies of the kinetics of hardening and strength of traditional and high-strength concretes, the expediency of using high-strength concretes in winter concreting technology is shown in terms of a high rate of strength gain over a period of 1…3 days and a low specific consumption of cement per unit strength. The high efficiency of the use of high-strength concrete in the conditions of a construction site during the construction of a 16-storey residential building is shown. The technical and economic advantages of using high-strength concrete in winter concreting technology are shown


  • Open Access

    Increased durability of glass composites

    byΒ Vladimir Erofeev, Valery Meshalkin, Elena Mitina, Victor Afonin, Yana Sanyagina

    Composite materials based on cement binders are currently among the widely used for the construction of transport structures. In accordance with regulatory requirements, concrete for transport construction must have improved physical, mechanical and operational properties. One of the areas that makes it possible to obtain materials with improved properties is the use of various fillers, including waste from industrial enterprises. Among the variety of man-made waste, a significant part is broken glass, which is an effective secondary resource and can be used in the construction industry to produce binders, fillers, composites and structures based on them. The article presents the results of research aimed at increasing the durability of composite materials based on cement binders filled with cullet. Effective additives have been proposed to reduce the reactivity of broken glass with binders. Processing of experimental data was carried out using experimental planning methods. The study of the experimental design showed that it is possible to reduce the number of factors previously involved in the formation of the experimental planning matrix. It was established that the reduction in the number of factors is carried out with a confidence probability of at least 0,95. Experimental studies were carried out on the biological resistance of composites filled with broken glass and their components under the influence of filamentous fungi. It has been established that pre-treatment of the filler surface with a 1, 3, 5 % solution of potassium permanganate helps impart fungicidal properties to the composites, and treatment with a 7,5 % solution makes it possible to obtain filled materials with fungicidal properties.

  • Open Access

    STRENGTH AND DURABILITY OF CONCRETES WITH A SUPER ABSORBENT POLYMER ADDITIVE

    by Kamil Sharafutdinov, Ksenia Saraykina, Galina Kashevarova, Yana Sanyagina, Vladimir Erofeev, Nikolai Vatin, Яна Банягина

    The article presents an analysis of the results of experimental studies of the effect of different types of a super absorbent polymer additive on the strength of different types of concrete. The study is aimed at the effectiveness of a new type of super absorbent additive in concrete structures. In the course of full-scale experiments, it was possible to identify the optimum dosage of SAP for fine-grained and heavy concretes. In addition, the results showed that the strength of concrete remains unchanged if the dosage of super absorbent polymer additive (SAP) is 0.5% of the weight of cement or less. The possibility of modern intelligent technologies (artificial neural networks) to predict the properties of concrete mixture and hardened concrete at given values of input parameters (SAP dosage and W/C), influence on concrete characteristics (slump of the cone, bending strength, compressive strength) has also been shown.


  • Biological and Climatic Resistance of Cement Composites Based on Biocidal Binders

    byΒ V. T. Erofeev, A. I. Rodin, S. N. Karpushin, Ya. A. Sanyagina, S. V. Klyuev, L. S. Sabitov


  • Open Access

    POWDER-ACTIVATED CONCRETE WITH A GRANULAR SUR-FACE TEXTURE

    byΒ Vladimir Erofeev, Nikolai Vatin, Irina Maksimova, Oleg Tarakanov, Yana Sanyagina, Irina Erofeeva, Oleg Suzdaltsev

    Показано, Ρ‡Ρ‚ΠΎ Π² послСдниС Π³ΠΎΠ΄Ρ‹ Π² отСчСствСнной ΠΈ ΠΌΠΈΡ€ΠΎΠ²ΠΎΠΉ ΠΏΡ€Π°ΠΊΡ‚ΠΈΠΊΠ΅ ΡˆΠΈΡ€ΠΎΠΊΠΎΠ΅ ΠΏΡ€ΠΈΠΌΠ΅Π½Π΅Π½ΠΈΠ΅ нашли ΡΠ°ΠΌΠΎΡƒΠΏΠ»ΠΎΡ‚Π½ΡΡŽΡ‰ΠΈΠ΅ΡΡ Π±Π΅Ρ‚ΠΎΠ½Π½Ρ‹Π΅ смСси ΠΎΡ‚Π»ΠΈΡ‡Π°ΡŽΡ‰ΠΈΠ΅ΡΡ высокой ΡƒΠ΄ΠΎΠ±ΠΎΡƒΠΊΠ»Π°Π΄Ρ‹Π²Π°Π΅ΠΌΠΎΡΡ‚ΡŒΡŽ Π±Π΅Π· примСнСния Π²ΠΈΠ±Ρ€Π°Ρ†ΠΈΠΎΠ½Π½ΠΎΠ³ΠΎ воздСйствия. Π‘ ΠΏΡ€ΠΈΠΌΠ΅Π½Π΅Π½ΠΈΠ΅ΠΌ ΠΈΠ½Π½ΠΎΠ²Π°Ρ†ΠΈΠΎΠ½Π½Ρ‹Ρ… Ρ‚Π΅Ρ…Π½ΠΎΠ»ΠΎΠ³ΠΈΠΉ ΠΌΠΎΠ³ΡƒΡ‚ Π±Ρ‹Ρ‚ΡŒ ΠΈΠ·Π³ΠΎΡ‚ΠΎΠ²Π»Π΅Π½Ρ‹ Ρ€Π°Π·Π½ΠΎΠΎΠ±Ρ€Π°Π·Π½Ρ‹Π΅ ΠΌΠ°Ρ‚Π΅Ρ€ΠΈΠ°Π»Ρ‹ ΠΈ издСлия Π°Ρ€Ρ…ΠΈΡ‚Π΅ΠΊΡ‚ΡƒΡ€Π½ΠΎ-ΡΡ‚Ρ€ΠΎΠΈΡ‚Π΅Π»ΡŒΠ½ΠΎΠ³ΠΎ назначСния с ΡƒΠ»ΡƒΡ‡ΡˆΠ΅Π½Π½Ρ‹ΠΌΠΈ Π΄Π΅ΠΊΠΎΡ€Π°Ρ‚ΠΈΠ²Π½Ρ‹ΠΌΠΈ свойствами. ΠŸΡ€ΠΈΠ²Π΅Π΄Π΅Π½Ρ‹ Ρ€Π΅Π·ΡƒΠ»ΡŒΡ‚Π°Ρ‚Ρ‹ исслСдования ΠΏΠΎ ΠΏΠΎΠ΄Π±ΠΎΡ€Ρƒ составов Π΄Π΅ΠΊΠΎΡ€Π°Ρ‚ΠΈΠ²Π½ΠΎ-ΠΎΡ‚Π΄Π΅Π»ΠΎΡ‡Π½Ρ‹Ρ… ΠΏΠΎΡ€ΠΎΡˆΠΊΠΎΠ²ΠΎ-Π°ΠΊΡ‚ΠΈΠ²ΠΈΡ€ΠΎΠ²Π°Π½Π½Ρ‹Ρ… Π±Π΅Ρ‚ΠΎΠ½ΠΎΠ² зСрнистой Ρ„Π°ΠΊΡ‚ΡƒΡ€ΠΎΠΉ повСрхности ΠΏΠΎ рСологичСским свойствам, показатСлям прочности ΠΈ морозостойкости. ΠŸΡ€ΠΈ ΠΏΡ€ΠΎΠ²Π΅Π΄Π΅Π½ΠΈΠΈ исслСдований Π² качСствС вяТущСго использовался СгипСтский Π±Π΅Π»Ρ‹ΠΉ Ρ†Π΅ΠΌΠ΅Π½Ρ‚, микронаполнитСля – ΠΌΠΈΠΊΡ€ΠΎΠΊΠ²Π°Ρ€Ρ†, тонкодиспСрсного ΠΊΠΎΠΌΠΏΠΎΠ½Π΅Π½Ρ‚Π° – отсСвы дроблСния Π³Ρ€Π°Π½ΠΈΡ‚Π° ΠΈ ΠΊΡƒΠΏΠ΅Ρ€ΡˆΠ»Π°ΠΊΠ° Ρ„Ρ€. 0–0,63 ΠΌΠΌ, пСска-заполнитСля – Π³Ρ€Π°Π½ΠΈΡ‚Π½Ρ‹Π΅ высСвки Ρ„Ρ€. 0,63–5 ΠΌΠΌ ΠΈ ΠΊΡƒΠΏΠ΅Ρ€ΡˆΠ»Π°ΠΊ Ρ„Ρ€. 0,63–2,5 ΠΌΠΌ. БмСси ΠΏΠ»Π°ΡΡ‚ΠΈΡ„ΠΈΡ†ΠΈΡ€ΠΎΠ²Π°Π»ΠΈΡΡŒ супСрпластификаторами Π½ΠΎΠ²ΠΎΠ³ΠΎ поколСния отСчСствСнного ΠΈ Π·Π°Ρ€ΡƒΠ±Π΅ΠΆΠ½ΠΎΠ³ΠΎ производства. Рассчитаны структурныС ΠΈ рСотСхнологичСскиС ΠΏΠΎΠΊΠ°Π·Π°Ρ‚Π΅Π»ΠΈ ΠΏΠΎΡ€ΠΎΡˆΠΊΠΎΠ²ΠΎ-Π°ΠΊΡ‚ΠΈΠ²ΠΈΡ€ΠΎΠ²Π°Π½Π½Ρ‹Ρ… Π±Π΅Ρ‚ΠΎΠ½ΠΎΠ². Из ΠΏΠΎΠ»ΡƒΡ‡Π΅Π½Π½Ρ‹Ρ… Π·Π½Π°Ρ‡Π΅Π½ΠΈΠΉ условных рСологичСских ΠΊΡ€ΠΈΡ‚Π΅Ρ€ΠΈΠ΅Π² ΠΏΠΎΡ€ΠΎΡˆΠΊΠΎΠ²ΠΎ-Π°ΠΊΡ‚ΠΈΠ²ΠΈΡ€ΠΎΠ²Π°Π½Π½Ρ‹Ρ… Π±Π΅Ρ‚ΠΎΠ½ΠΎΠ² слСдуСт, Ρ‡Ρ‚ΠΎ всС ΠΎΠ½ΠΈ Π·Π½Π°Ρ‡ΠΈΡ‚Π΅Π»ΡŒΠ½ΠΎ большС Π΅Π΄ΠΈΠ½ΠΈΡ†Ρ‹ ΠΈ Ρ…Π°Ρ€Π°ΠΊΡ‚Π΅Ρ€ΠΈΠ·ΡƒΡŽΡ‚ су­щСствСнноС ΠΏΡ€Π΅Π²Ρ‹ΡˆΠ΅Π½ΠΈΠ΅ объСмов рСологичСских ΠΌΠ°Ρ‚Β­Ρ€ΠΈΡ† Π½Π°Π΄ объСмами тонкозСрнистых, грубозСрнистых ΠΊΠΎΠΌΠΏΠΎΠ½Π΅Π½Ρ‚ΠΎΠ², ΠΊΠΎΡ‚ΠΎΡ€Ρ‹Π΅ Π²ΠΌΠ΅Ρ‰Π°ΡŽΡ‚ΡΡ Π² Π½ΠΈΡ… с большими Ρ€Π°Π·Π΄Π²ΠΈΠΆΠΊΠ°ΠΌΠΈ частиц ΠΈ Π·Π΅Ρ€Π΅Π½. ΠŸΡ€ΠΎΡ‡Π½ΠΎΡΡ‚ΡŒ ΠΊΠ°ΠΊ комплСксная мСханичСская характСристика, Π²ΠΊΠ»ΡŽΡ‡Π°ΡŽΡ‰Π°Ρ сочСтаниС ΠΊΡ€ΠΈΡ‚Π΅Ρ€ΠΈΠ΅Π² прочности, надСТности ΠΈ долговСчности, являСтся ваТнСйшим ΠΏΠ°Ρ€Π°ΠΌΠ΅Ρ‚Ρ€ΠΎΠΌ качСства структуры Π±Π΅Ρ‚ΠΎΠ½Π° ΠΊΠ°ΠΊ Π°ΠΊΡ‚ΠΈΠ²Π½ΠΎΠ³ΠΎ ΠΈ самого массового ΡΡ‚Ρ€ΠΎΠΈΡ‚Π΅Π»ΡŒΠ½ΠΎΠ³ΠΎ ΠΌΠ°Ρ‚Π΅Ρ€ΠΈΠ°Π»Π° конструкционного назначСния. Здания ΠΈ сооруТСния Π² условиях эксплуатации ΠΏΠΎΠ΄Π²Π΅Ρ€Π³Π°ΡŽΡ‚ΡΡ цикличСским мСханичСским Π½Π°Π³Ρ€ΡƒΠ·ΠΊΠ°ΠΌ Ρ€Π°Π·Π»ΠΈΡ‡Π½ΠΎΠ³ΠΎ Π²ΠΈΠ΄Π° ΠΈ климатичСским воздСйствиям, Ρ…Π°Ρ€Π°ΠΊΡ‚Π΅Ρ€ΠΈΠ·ΡƒΡŽΡ‰ΠΈΠΌΡΡ цикличСскими проявлСниями ΠΎΡ‚Ρ€ΠΈΡ†Π°Ρ‚Π΅Π»ΡŒΠ½Ρ‹Ρ… ΠΈ Π·Π½Π°ΠΊΠΎΠΏΠ΅Ρ€Π΅ΠΌΠ΅Π½Π½Ρ‹Ρ… Ρ‚Π΅ΠΌΠΏΠ΅Ρ€Π°Ρ‚ΡƒΡ€. Π’ Ρ€Π΅Π·ΡƒΠ»ΡŒΡ‚Π°Ρ‚Π΅ выполнСния исслСдований выявлСны высокиС ΠΏΠΎΠΊΠ°Π·Π°Ρ‚Π΅Π»ΠΈ прочности ΠΈ морозостойкости Π΄Π΅ΠΊΠΎΡ€Π°Ρ‚ΠΈΠ²Π½Ρ‹Ρ… ΠΏΠΎΡ€ΠΎΡˆΠΊΠΎΠ²ΠΎ-Π°ΠΊΡ‚ΠΈΠ²ΠΈΡ€ΠΎΠ²Π°Π½Π½Ρ‹Ρ… Π±Π΅Ρ‚ΠΎΠ½ΠΎΠ² с зСрнистой Ρ„Π°ΠΊΡ‚ΡƒΡ€ΠΎΠΉ повСрхности.