Abdussamet Subasi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Abdussamet Subasi has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Kasim Erdem
İSTANBUL TEKNİK ÜNİVERSİTESİ, MAKİNE FAKÜLTESİ
2 shared publications - Bayram Sahin
Department of Mechanical Engineering, Faculty of Engineering, University of Atatürk, 25240 Erzurum, Turkey
1 shared publication - Bayram Sahin
Department of Mechanical Engineering, Yildiz Technical University (YTU), Istanbul, Turkey
1 shared publication - Eyuphan Manay
Department of Mechanical Engineering, Erzurum Technical University, 25100 Erzurum, Türkiye
1 shared publication - Farhad Nemati Taher
Department of Mechanical Engineering, Istanbul Technical University (ITU) , Istanbul TR-34437, Turkey
1 shared publication - Hasan Gunes
Istanbul Technical University, Istanbul, Turkey
1 shared publication
Latest Publications
- Open Access
- 1 February 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (2)
A fast three-dimensional flow field prediction around bluff bodies using deep learning
This study presents a deep learning approach for predicting the flow field in the incompressible turbulent three-dimensional (3D) external flow around right-rhombic prism-shaped bluff bodies. The approach involves treating the nodes of the unstructured grid in the computational fluid dynamics domain as a point cloud, which is used as an input for a neural network. The neural network is trained to map the spatial coordinates of the nodes to the corresponding velocity and pressure values in the domain. The PointNet, a reliable solution in 3D vision tasks, is selected as the neural network architecture. Implementing this architecture makes it feasible to use irregular positions of the nodes of an unstructured grid as an input without needing interpolation. A dataset, comprising 3511 cases, is generated for training and testing the network. This is achieved by changing the geometric parameters of a right rhombic prism and varying its angle to the flow stream. Then, the continuity and momentum equations for turbulent flow are solved using a solver. Given the need for a larger number of points to accurately represent a 3D flow, the architecture of PointNet is modified. This modification involves adding extra layers and adjusting the number of neurons inside the layers to overcome this challenge. Once the training is completed, given the unseen samples from the test dataset to the model, our model can predict the velocity and pressure of the flow field at a speed that exceeds our conventional solver by several orders of magnitude with a maximum relative error of 4.58%.
- 1 February 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (2)
Open AccessA fast three-dimensional flow field prediction around bluff bodies using deep learning
This study presents a deep learning approach for predicting the flow field in the incompressible turbulent three-dimensional (3D) external flow around right-rhombic prism-shaped bluff bodies. The approach involves treating the nodes of the unstructured grid in the computational fluid dynamics domain as a point cloud, which is used as an input for a neural network. The neural network is trained to map the spatial coordinates of the nodes to the corresponding velocity and pressure values in the domain. The PointNet, a reliable solution in 3D vision tasks, is selected as the neural network architecture. Implementing this architecture makes it feasible to use irregular positions of the nodes of an unstructured grid as an input without needing interpolation. A dataset, comprising 3511 cases, is generated for training and testing the network. This is achieved by changing the geometric parameters of a right rhombic prism and varying its angle to the flow stream. Then, the continuity and momentum equations for turbulent flow are solved using a solver. Given the need for a larger number of points to accurately represent a 3D flow, the architecture of PointNet is modified. This modification involves adding extra layers and adjusting the number of neurons inside the layers to overcome this challenge. Once the training is completed, given the unseen samples from the test dataset to the model, our model can predict the velocity and pressure of the flow field at a speed that exceeds our conventional solver by several orders of magnitude with a maximum relative error of 4.58%.
- 1 November 2022
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 147 (24) , 14765-14786
A review on laminar-to-turbulent transition of nanofluid flows
- 1 November 2022
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 147 (24) , 14765-14786
A review on laminar-to-turbulent transition of nanofluid flows
- 1 February 2022
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 8 (1) , 29-37
Mini-channel heat exchanger optimization using genetic algorithm and multiple-criteria decision making
This study aims to apply an integrated optimization approach that combines Multi-objective Optimization (MOO) and Multiple-criteria Decision-making (MCDM) to optimize a multiport mini-channel having 2D sawtooth micro fins under laminar, transitional, and turbulent flow conditions. Water was considered as working fluid. The Reynolds number (Re), fin height (Hf), fin width (Wf), the number of micro-fins in each mini-channel (N), and the distance between the successive fins (S1) were selected as design and flow parameters and the Nusselt number (Nu) and the Poiseuille number (Po) were selected as objective functions. A Genetic Algorithm based MOO study was conducted using the correlations available in the literature aiming to find the optimum values of design and flow parameters that maximize Nu and minimize Po. Then, the VIsekriterijumska Optimizacija I Kompromisno Resenje (VIKOR) method was employed to help designers to select an optimum design among the Pareto optimal solution set which is the output of MOO. Finally, the optimization results obtained were compared with those obtained by the 1st Law of Thermodynamics based Performance Evaluation Criteria (PEC). The advantages and disadvantages of these methods were discussed in detail. It is revealed that the integrated approach is a more comprehensive and flexible approach that also covers the results of PEC.
- 1 February 2022
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 8 (1) , 29-37
Mini-channel heat exchanger optimization using genetic algorithm and multiple-criteria decision making
This study aims to apply an integrated optimization approach that combines Multi-objective Optimization (MOO) and Multiple-criteria Decision-making (MCDM) to optimize a multiport mini-channel having 2D sawtooth micro fins under laminar, transitional, and turbulent flow conditions. Water was considered as working fluid. The Reynolds number (Re), fin height (Hf), fin width (Wf), the number of micro-fins in each mini-channel (N), and the distance between the successive fins (S1) were selected as design and flow parameters and the Nusselt number (Nu) and the Poiseuille number (Po) were selected as objective functions. A Genetic Algorithm based MOO study was conducted using the correlations available in the literature aiming to find the optimum values of design and flow parameters that maximize Nu and minimize Po. Then, the VIsekriterijumska Optimizacija I Kompromisno Resenje (VIKOR) method was employed to help designers to select an optimum design among the Pareto optimal solution set which is the output of MOO. Finally, the optimization results obtained were compared with those obtained by the 1st Law of Thermodynamics based Performance Evaluation Criteria (PEC). The advantages and disadvantages of these methods were discussed in detail. It is revealed that the integrated approach is a more comprehensive and flexible approach that also covers the results of PEC.
- 10 November 2021
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 37 (1) , 377-388
Hibrit nanoakışkanların özgül ısılarının yapay sinir ağları ile tahmin edilmesi
Nanoakışkanlı mühendislik sistemlerinin deneysel ve sayısal analizinde nanoakışkanların termofiziksel ve reolojik özelliklerinin yüksek doğrulukla belirlenmesi analiz sonuçlarının hassasiyeti üzerinde kayda değer bir etkiye sahiptir. Bu çalışmada, deiyonize su bazlı CuO + ÇDKNT, MgO + ÇDKNT ve SnO2 + ÇDKNT hibrit nanoakışkanlarının özgül ısılarının tahmin edilmesinde kullanılabilecek Yapay Sinir Ağları (YSA) tabanlı bir tahminleyici geliştirilmesi ve bu tahminleyicinin literatürde yaygın olarak kullanılan korelasyonların yerine kullanılabilme potansiyelinin araştırılması hedeflenmiştir. Çalışmada, literatürde bulunan deiyonize su bazlı CuO + ÇDKNT, MgO + ÇDKNT ve SnO2 + ÇDKNT hibrit nanoakışkanların farklı sıcaklık T (25 – 50 ºC), hacim oranı φ (%0,25 – %1,50) ve partikül çapı dp (20 – 50 nm) için deneysel olarak elde edilmiş özgül ısılarına ait veriler kullanılmıştır. Nöron sayısı, gizli katman sayısı, transfer fonksiyonu, epoch sayısı ve öğrenme oranı gibi eğitim algoritması ve ağa ait hiper parametrelerin optimum değerleri ve çeşitli eğitim algoritmaları arasından ele alınan problem için en iyi sonuç veren eğitim algoritması Bayes optimizasyonu ile belirlenmiştir. Aşırı öğrenmeye karşı önlem olarak k-katlı çapraz doğrulama uygulanmıştır. Çalışma sonucunda elde edilen YSA tabanlı tahminleyici ile klasik korelasyonlara nazaran doğruluk payı daha yüksek bir tahminleme yapılabileceği ve YSA’nın nanoakışkanların özgül ısılarının belirlenmesinde kullanılabilecek güçlü bir araç olduğu sonucuna varılmıştır.
- 10 November 2021
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 37 (1) , 377-388
Hibrit nanoakışkanların özgül ısılarının yapay sinir ağları ile tahmin edilmesi
Nanoakışkanlı mühendislik sistemlerinin deneysel ve sayısal analizinde nanoakışkanların termofiziksel ve reolojik özelliklerinin yüksek doğrulukla belirlenmesi analiz sonuçlarının hassasiyeti üzerinde kayda değer bir etkiye sahiptir. Bu çalışmada, deiyonize su bazlı CuO + ÇDKNT, MgO + ÇDKNT ve SnO2 + ÇDKNT hibrit nanoakışkanlarının özgül ısılarının tahmin edilmesinde kullanılabilecek Yapay Sinir Ağları (YSA) tabanlı bir tahminleyici geliştirilmesi ve bu tahminleyicinin literatürde yaygın olarak kullanılan korelasyonların yerine kullanılabilme potansiyelinin araştırılması hedeflenmiştir. Çalışmada, literatürde bulunan deiyonize su bazlı CuO + ÇDKNT, MgO + ÇDKNT ve SnO2 + ÇDKNT hibrit nanoakışkanların farklı sıcaklık T (25 – 50 ºC), hacim oranı φ (%0,25 – %1,50) ve partikül çapı dp (20 – 50 nm) için deneysel olarak elde edilmiş özgül ısılarına ait veriler kullanılmıştır. Nöron sayısı, gizli katman sayısı, transfer fonksiyonu, epoch sayısı ve öğrenme oranı gibi eğitim algoritması ve ağa ait hiper parametrelerin optimum değerleri ve çeşitli eğitim algoritmaları arasından ele alınan problem için en iyi sonuç veren eğitim algoritması Bayes optimizasyonu ile belirlenmiştir. Aşırı öğrenmeye karşı önlem olarak k-katlı çapraz doğrulama uygulanmıştır. Çalışma sonucunda elde edilen YSA tabanlı tahminleyici ile klasik korelasyonlara nazaran doğruluk payı daha yüksek bir tahminleme yapılabileceği ve YSA’nın nanoakışkanların özgül ısılarının belirlenmesinde kullanılabilecek güçlü bir araç olduğu sonucuna varılmıştır.
- 20 June 2021
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 145 (5) , 2451-2465
An experimental study on optimization of ${\mathbf{SiO}}_{2}$/water nanofluid flows in circular minichannels- 20 June 2021
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 145 (5) , 2451-2465
An experimental study on optimization of ${\mathbf{SiO}}_{2}$/water nanofluid flows in circular minichannels- 27 February 2017
- Published by Springer Nature in Heat and Mass Transfer
- Vol. 53 (7) , 2435-2443
Performance evaluation of RANS-based turbulence models in simulating a honeycomb heat sink
- 27 February 2017
- Published by Springer Nature in Heat and Mass Transfer
- Vol. 53 (7) , 2435-2443
Performance evaluation of RANS-based turbulence models in simulating a honeycomb heat sink