Erhan Onat
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Erhan Onat has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Selma Ekinci
Vocational School of Technical Sciences, Department of Chemistry and Chemical Process Technology Batman University Batman Turkey
7 shared publications - Mehmet Sait İzGi
Siirt University
6 shared publications Ömer Şahin
Faculty of Chemical and Metallurgical Engineering, Department of Chemical Engineering Istanbul Technical University Istanbul Türkiye
4 shared publicationsMehmet Sait İzGi
2 shared publications- Ahmet Sayilgan
Tatvan Vocational School, Electricity and Energy Program, Bitlis Eren University,Bitlis,Trkiye
1 shared publication - Ezman Karabulut
Vocational School of Health Services Bitlis Eren University Bitlis 13000 Turkey
1 shared publication
Latest Publications
- 4 September 2026
- Published by Wiley in Applied Organometallic Chemistry
- Vol. 40 (10) , e70647
RuCo@Expanded Perlite Nanocatalyst for Sustainable Hydrogen Generation via Methanolysis of Ammonia Borane
RuCo nanoclusters supported on expanded perlite (EP) were synthesized and evaluated as efficient catalysts for hydrogen generation via the methanolysis of ammonia borane (AB). EP, an inexpensive and environmentally benign support, was modified to enhance its surface properties and subsequently employed for metal loading. The resulting RuCo@EP catalyst exhibited good activity, achieving a hydrogen generation rate (HGR) of 5487 mL g −1 min −1 and a turnover frequency (TOF) of 94.5 h −1 at 30°C. Comprehensive kinetic studies revealed that the reaction follows first‐order kinetics with respect to AB concentration, with an apparent activation energy of 47.07 kJ mol −1 . Structural and morphological analyses (XRD, SEM–EDS, TEM, and BET) supported the successful incorporation and relatively uniform distribution of Ru and Co nanoparticles on the perlite surface. These findings demonstrate that RuCo@EP is a cost‐effective and highly active catalyst, highlighting the potential of natural mineral supports for sustainable hydrogen generation.
- 4 September 2026
- Published by Wiley in Applied Organometallic Chemistry
- Vol. 40 (10) , e70647
RuCo@Expanded Perlite Nanocatalyst for Sustainable Hydrogen Generation via Methanolysis of Ammonia Borane
RuCo nanoclusters supported on expanded perlite (EP) were synthesized and evaluated as efficient catalysts for hydrogen generation via the methanolysis of ammonia borane (AB). EP, an inexpensive and environmentally benign support, was modified to enhance its surface properties and subsequently employed for metal loading. The resulting RuCo@EP catalyst exhibited good activity, achieving a hydrogen generation rate (HGR) of 5487 mL g −1 min −1 and a turnover frequency (TOF) of 94.5 h −1 at 30°C. Comprehensive kinetic studies revealed that the reaction follows first‐order kinetics with respect to AB concentration, with an apparent activation energy of 47.07 kJ mol −1 . Structural and morphological analyses (XRD, SEM–EDS, TEM, and BET) supported the successful incorporation and relatively uniform distribution of Ru and Co nanoparticles on the perlite surface. These findings demonstrate that RuCo@EP is a cost‐effective and highly active catalyst, highlighting the potential of natural mineral supports for sustainable hydrogen generation.
- Open Access
- 30 June 2025
- Published by Mus Alparslan Universitesi Fen Bilimleri Dergisi in Muş Alparslan Üniversitesi Fen Bilimleri Dergisi
- Vol. 13 (1) , 57-63
Cu(II) Adsorption from Aqueous Solution Using K2CO3-Activated Carbon Derived from Chenopodium botrys: A Sustainable Approach
This study focuses on the manufacture of a new activated carbon from Chenopodium botrys by potassium carbonate (K2CO3) activation. The physicochemical characteristics of the prepared activated carbon were analyzed using FT-IR, EDX, and SEM techniques, confirming some porous structure rich in functional groups that enhance adsorption performance. Optimum parameters were determined to carry out adsorption studies under the most efficient conditions. A pseudo-second-order model for the adsorption kinetics suggested that the process was driven by chemisorption. Multilayer adsorption on a heterogeneous surface was suggested by isotherm investigations, which showed that the Freundlich model offered the best fit. The process's endothermic character was further supported by the rise in adsorption capacity with temperature. These results show that Chenopodium botrys-derived activated carbon has the potential to be a cost-effective and environmentally friendly material for removing Cu(II) from contaminated water sources.
- 30 June 2025
- Published by Mus Alparslan Universitesi Fen Bilimleri Dergisi in Muş Alparslan Üniversitesi Fen Bilimleri Dergisi
- Vol. 13 (1) , 57-63
Open AccessCu(II) Adsorption from Aqueous Solution Using K2CO3-Activated Carbon Derived from Chenopodium botrys: A Sustainable Approach
This study focuses on the manufacture of a new activated carbon from Chenopodium botrys by potassium carbonate (K2CO3) activation. The physicochemical characteristics of the prepared activated carbon were analyzed using FT-IR, EDX, and SEM techniques, confirming some porous structure rich in functional groups that enhance adsorption performance. Optimum parameters were determined to carry out adsorption studies under the most efficient conditions. A pseudo-second-order model for the adsorption kinetics suggested that the process was driven by chemisorption. Multilayer adsorption on a heterogeneous surface was suggested by isotherm investigations, which showed that the Freundlich model offered the best fit. The process's endothermic character was further supported by the rise in adsorption capacity with temperature. These results show that Chenopodium botrys-derived activated carbon has the potential to be a cost-effective and environmentally friendly material for removing Cu(II) from contaminated water sources.
- Open Access
- 26 March 2025
- Published by Bitlis Eren Universitesi Fen Bilimleri Dergisi in Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
- Vol. 14 (1) , 633-646
Caffeine Coated Iron Oxide Crustacean for Ammonia Borane Dehydrogenation Development of Magnetic Nickel Nanoparticles
The aim of this study was to develop nickel (Ni) nanoclusters with caffeine-coated magnetic iron oxide (Fe3O4) center shells for the catalytic hydrolysis of ammonia borane (AB). In the study, magnetic iron oxide (MIO) clusters were obtained by hydrothermal treatment. These clusters were first coated with caffeine according to the reflux method at 150 oC for 12 hours, and then Ni was decorated on these clusters by impregnation method. Magnetic Ni catalyst (Ni@C/Fe3O4) was synthesized by dropping 10 M 20 mL sodium borohydride (NaBH4-SBH) into the Ni-C/ Fe3O4 magnetic nanoclusters in solution as a result of the loading processes carried out at room conditions. After filtration, washing and drying in nitrogen atmosphere, the crumbled catalyst was identified by advanced identification techniques (FT-IR, BET, SEM, EDX, XPS) and used in AB hydrolysis. The solvate medium, catalyst amount, AB concentration, temperature and repeated use parameters were investigated for AB catalytic hydrolysis. As a result of the optimization at 303 K, the best hydrogen production was determined as 7873 mL/g.min using 2.5 % NaOH, 30 mg catalyst and 300 mM AB. The catalyst cycle frequency (TOF) was measured as 1447 s-1. As a result of reaction kinetics investigations, it was determined that the reaction was 1st order and the reaction activation energy was 35.07 kJ/mol.
- 26 March 2025
- Published by Bitlis Eren Universitesi Fen Bilimleri Dergisi in Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
- Vol. 14 (1) , 633-646
Open AccessCaffeine Coated Iron Oxide Crustacean for Ammonia Borane Dehydrogenation Development of Magnetic Nickel Nanoparticles
The aim of this study was to develop nickel (Ni) nanoclusters with caffeine-coated magnetic iron oxide (Fe3O4) center shells for the catalytic hydrolysis of ammonia borane (AB). In the study, magnetic iron oxide (MIO) clusters were obtained by hydrothermal treatment. These clusters were first coated with caffeine according to the reflux method at 150 oC for 12 hours, and then Ni was decorated on these clusters by impregnation method. Magnetic Ni catalyst (Ni@C/Fe3O4) was synthesized by dropping 10 M 20 mL sodium borohydride (NaBH4-SBH) into the Ni-C/ Fe3O4 magnetic nanoclusters in solution as a result of the loading processes carried out at room conditions. After filtration, washing and drying in nitrogen atmosphere, the crumbled catalyst was identified by advanced identification techniques (FT-IR, BET, SEM, EDX, XPS) and used in AB hydrolysis. The solvate medium, catalyst amount, AB concentration, temperature and repeated use parameters were investigated for AB catalytic hydrolysis. As a result of the optimization at 303 K, the best hydrogen production was determined as 7873 mL/g.min using 2.5 % NaOH, 30 mg catalyst and 300 mM AB. The catalyst cycle frequency (TOF) was measured as 1447 s-1. As a result of reaction kinetics investigations, it was determined that the reaction was 1st order and the reaction activation energy was 35.07 kJ/mol.
- 3 February 2025
- Published by Wiley in ChemistrySelect
- Vol. 10 (5)
Optimized Synthesis and Characterization of Activated Carbon from Corn Silk and Corn Silk Hydrochar
This study investigates the development and optimization of activated carbon (AC) from corn silk (CS‐AC) and corn silk hydrochar (CS‐HC‐AC) as a sustainable solution for water purification. For the first time, hydrothermal treatment and activation processes were employed, producing AC from corn silk with improved structural properties. CS‐HC‐AC exhibited a remarkable S BET surface area of 331.233 m 2 g −1 , surpassing the 7.335 m 2 g −1 of CS‐AC. Key factors such as temperature, activation time, and activator rate were optimized (100% activator rate, 500 °C temperature, and 60 min activation time), with K 2 CO 3 and ZnCl 2 identified as the most effective activators for CS‐AC and CS‐HC‐AC, respectively. The resulting ACs showed high adsorption capacities for heavy metals (Cr(VI), Pb(II), and Ni(II)) and methylene blue dye.
- 3 February 2025
- Published by Wiley in ChemistrySelect
- Vol. 10 (5)
Optimized Synthesis and Characterization of Activated Carbon from Corn Silk and Corn Silk Hydrochar
This study investigates the development and optimization of activated carbon (AC) from corn silk (CS‐AC) and corn silk hydrochar (CS‐HC‐AC) as a sustainable solution for water purification. For the first time, hydrothermal treatment and activation processes were employed, producing AC from corn silk with improved structural properties. CS‐HC‐AC exhibited a remarkable S BET surface area of 331.233 m 2 g −1 , surpassing the 7.335 m 2 g −1 of CS‐AC. Key factors such as temperature, activation time, and activator rate were optimized (100% activator rate, 500 °C temperature, and 60 min activation time), with K 2 CO 3 and ZnCl 2 identified as the most effective activators for CS‐AC and CS‐HC‐AC, respectively. The resulting ACs showed high adsorption capacities for heavy metals (Cr(VI), Pb(II), and Ni(II)) and methylene blue dye.
- 4 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 331-334
Development of Supported Catalyst for Hydrogen Production From Sodium Borohydride
The best solution to the problems caused by fossil fuels and the limitations of renewable energy sources is the conversion of hydrogen into energy in fuel cells. The transportation and storage problems, which are the main obstacles to the conversion of hydrogen into energy in fuel cells, can be overcome by storing hydrogen in boron compounds. The recovery of hydrogen stored in boron compounds when needed is carried out through catalytic processes. In this study, a supported catalyst was synthesized for use in hydrogen production from sodium borohydride (SBH), which is one of the main boron compounds used in the solid storage of hydrogen, and the dehydrogenation parameters of the synthesized catalyst were investigated. In this context, chenopodium botrys plant extract was used as a support material for nickel (Ni) metal atoms. At the end of the extraction carried out through a hydrothermal process, Ni atoms were decorated using the impregnation method in the extract, and the Ni@KBHE catalyst was produced via reduction under SBH. After the washing, filtration, and drying processes were carried out under a nitrogen atmosphere, the solution medium, catalyst amount, SBH concentration, and temperature parameters of SBH hydrolysis with the crumbled catalyst were optimized. Optimum values for hydrogen production were obtained using 5% NaOH, 60 mg of catalyst, and 2% SBH. The hydrogen production rate (HGR) at these values was 4664 mL/g min. As a result of the catalytic reaction kinetic calculations, it was determined that the reaction was nth order, and the reaction activation energy was 49.4 kJ/mol.
- 4 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 331-334
Development of Supported Catalyst for Hydrogen Production From Sodium Borohydride
The best solution to the problems caused by fossil fuels and the limitations of renewable energy sources is the conversion of hydrogen into energy in fuel cells. The transportation and storage problems, which are the main obstacles to the conversion of hydrogen into energy in fuel cells, can be overcome by storing hydrogen in boron compounds. The recovery of hydrogen stored in boron compounds when needed is carried out through catalytic processes. In this study, a supported catalyst was synthesized for use in hydrogen production from sodium borohydride (SBH), which is one of the main boron compounds used in the solid storage of hydrogen, and the dehydrogenation parameters of the synthesized catalyst were investigated. In this context, chenopodium botrys plant extract was used as a support material for nickel (Ni) metal atoms. At the end of the extraction carried out through a hydrothermal process, Ni atoms were decorated using the impregnation method in the extract, and the Ni@KBHE catalyst was produced via reduction under SBH. After the washing, filtration, and drying processes were carried out under a nitrogen atmosphere, the solution medium, catalyst amount, SBH concentration, and temperature parameters of SBH hydrolysis with the crumbled catalyst were optimized. Optimum values for hydrogen production were obtained using 5% NaOH, 60 mg of catalyst, and 2% SBH. The hydrogen production rate (HGR) at these values was 4664 mL/g min. As a result of the catalytic reaction kinetic calculations, it was determined that the reaction was nth order, and the reaction activation energy was 49.4 kJ/mol.
- Open Access
- 1 October 2024
- Published by Afyon Kocatepe Universitesi Fen Ve Muhendislik Bilimleri Dergisi in Afyon Kocatepe University Journal of Sciences and Engineering
- Vol. 24 (5) , 1061-1070
Study of the Sodium Borohydride Hydrolysis Reaction's Performance via a Kaolin-Supported Co-Cr Bimetallic Catalyst
Hydrogen is an attractive source of energy because of its properties, which include superior quality, effectiveness, pureness, dependability, and sustainability. Technologies for producing and storing hydrogen are being developed in parallel with fuel cell development. Chemical storage of hydrogen in a metal hydride containing boron eliminates the problem of hydrogen transportation and storage. Through catalytic reactions, hydrogen stored in solid form in boron hydrides can be recovered. In this study, a nowel developed Co-Cr bimetallic catalyst supported by kaolin, a natural mineral, was synthesized to be used for hydrogen production by hydrolysis of sodium boron hydride. The structural characteristics of the produced Co-Cr@Kaolin catalyst were ascertained by EDX, FTIR, and SEM analyses. Next, the ideal conditions for the hydrolysis reaction of sodium borohydride (NaBH4) catalyzed by Co-Cr@Kaolin were examined. These included the concentration of the catalyst, the amount of support material (kaolin), the amount of catalyst, and the concentration of NaBH4. The optimal hydrolysis conditions were found to be 2.5% NaOH concentration, 40 mg of catalyst, and 2% NaBH4 concentration at 303 K. The maximum rate of hydrogen production was determined as 5007 ml g-1 min-1 under optimal conditions. After conducting hydrolysis operations at different temperatures to elucidate the reaction kinetics, it was found that the catalytic hydrolysis reaction was of the 0th order and that the reaction activation energy was 19.36 kJ mol-1. The hydrogen production rate obtained as a result of the hydrolysis reaction accompanied by a Co-Cr catalyst was determined as 3166 ml g-1 min-1. It is therefore established that supporting kaolin to Co-Cr catalyst enhances its efficacy.
- 1 October 2024
- Published by Afyon Kocatepe Universitesi Fen Ve Muhendislik Bilimleri Dergisi in Afyon Kocatepe University Journal of Sciences and Engineering
- Vol. 24 (5) , 1061-1070
Open AccessStudy of the Sodium Borohydride Hydrolysis Reaction's Performance via a Kaolin-Supported Co-Cr Bimetallic Catalyst
Hydrogen is an attractive source of energy because of its properties, which include superior quality, effectiveness, pureness, dependability, and sustainability. Technologies for producing and storing hydrogen are being developed in parallel with fuel cell development. Chemical storage of hydrogen in a metal hydride containing boron eliminates the problem of hydrogen transportation and storage. Through catalytic reactions, hydrogen stored in solid form in boron hydrides can be recovered. In this study, a nowel developed Co-Cr bimetallic catalyst supported by kaolin, a natural mineral, was synthesized to be used for hydrogen production by hydrolysis of sodium boron hydride. The structural characteristics of the produced Co-Cr@Kaolin catalyst were ascertained by EDX, FTIR, and SEM analyses. Next, the ideal conditions for the hydrolysis reaction of sodium borohydride (NaBH4) catalyzed by Co-Cr@Kaolin were examined. These included the concentration of the catalyst, the amount of support material (kaolin), the amount of catalyst, and the concentration of NaBH4. The optimal hydrolysis conditions were found to be 2.5% NaOH concentration, 40 mg of catalyst, and 2% NaBH4 concentration at 303 K. The maximum rate of hydrogen production was determined as 5007 ml g-1 min-1 under optimal conditions. After conducting hydrolysis operations at different temperatures to elucidate the reaction kinetics, it was found that the catalytic hydrolysis reaction was of the 0th order and that the reaction activation energy was 19.36 kJ mol-1. The hydrogen production rate obtained as a result of the hydrolysis reaction accompanied by a Co-Cr catalyst was determined as 3166 ml g-1 min-1. It is therefore established that supporting kaolin to Co-Cr catalyst enhances its efficacy.
- 15 July 2024
- Published by Balikesir Universitesi Fen Bilimleri Enstitusu Dergisi in Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 26 (2) , 455-471
Activated carbon assisted cobalt catalyst for hydrogen production: synthesis and characterization
In this work, a cobalt catalyst supported by activated carbon was used to produce hydrogen through the hydrolysis of sodium borohydride (NaBH4). First, hydrochar was produced from MDF powder by hydrothermal pretreatment. Then, ideal parameters (activator percentage, activation time, baking time, and temperature) for activated carbon production were determined. The best conditions for the synthesis of activated carbon were found to be a 70% activator rate, 24 hours of activation time, 45 minutes of baking time, and 700 ⁰C temperature, according to iodine number measurements. The iodine number was measured as 929 mg/g under optimum conditions. Activated carbon (as a support) produced under optimum conditions was combined with the cobalt catalyst. DT/TGA, FT-IR, SEM, and EDX analyses were used to evaluate the catalyst's structure. Supporting material ratio, NaOH concentration, catalyst amount, and NaBH4 concentration are the variables studied in catalyst synthesis. The trials led to the identification of the optimal catalyst parameters as being 70% support material, 5% NaOH, 40 mg catalyst, and 2% NaBH4 concentration. The hydrogen production rate with the catalyst synthesized in these conditions was determined as 8592.8 ml/g.min. As a result of the hydrolysis reactions carried out at different temperatures, it was determined that the reaction was n. order and the reaction activation energy was 31.19 kJ/mol. Even after the sixth use, 100% efficiency was attained when the catalyst activity was tested repeatedly.
- 15 July 2024
- Published by Balikesir Universitesi Fen Bilimleri Enstitusu Dergisi in Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 26 (2) , 455-471
Activated carbon assisted cobalt catalyst for hydrogen production: synthesis and characterization
In this work, a cobalt catalyst supported by activated carbon was used to produce hydrogen through the hydrolysis of sodium borohydride (NaBH4). First, hydrochar was produced from MDF powder by hydrothermal pretreatment. Then, ideal parameters (activator percentage, activation time, baking time, and temperature) for activated carbon production were determined. The best conditions for the synthesis of activated carbon were found to be a 70% activator rate, 24 hours of activation time, 45 minutes of baking time, and 700 ⁰C temperature, according to iodine number measurements. The iodine number was measured as 929 mg/g under optimum conditions. Activated carbon (as a support) produced under optimum conditions was combined with the cobalt catalyst. DT/TGA, FT-IR, SEM, and EDX analyses were used to evaluate the catalyst's structure. Supporting material ratio, NaOH concentration, catalyst amount, and NaBH4 concentration are the variables studied in catalyst synthesis. The trials led to the identification of the optimal catalyst parameters as being 70% support material, 5% NaOH, 40 mg catalyst, and 2% NaBH4 concentration. The hydrogen production rate with the catalyst synthesized in these conditions was determined as 8592.8 ml/g.min. As a result of the hydrolysis reactions carried out at different temperatures, it was determined that the reaction was n. order and the reaction activation energy was 31.19 kJ/mol. Even after the sixth use, 100% efficiency was attained when the catalyst activity was tested repeatedly.