Nurettin Gökhan Adar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nurettin Gökhan Adar has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Ali Yildiz
Department of Mechatronics Engineering, Faculty of Engineering and Natural Sciences, Bursa Technical University, Bursa, Turkey
2 shared publications - Mustafa Özden
Bursa Technical University
2 shared publications Ayberk Beyhan
Department of Mechatronics Engineering, Faculty of Engineering and Natural Sciences, Bursa Technical University, 16310 Bursa, Turkey
1 shared publication- Davut Ertekin
Power Electronics Center of Research Laboratories, Electrical and Electronics Engineering Department, Bursa Technical University, 16310 Bursa, Türkiye
1 shared publication - Hakan Ulker
Bursa Teknik Üniversitesi
1 shared publication - Oğuz Mısır
Bursa Technical University
1 shared publication
Latest Publications
- Open Access
Radiation-Aware Path Planning Framework for Mobile Robots in Dynamic Hazardous Environments
This study presents a radiation-aware path planning framework for mobile robots operating in hazardous environments containing radiation sources, shielding structures, and moving obstacles. The proposed method integrates A*-based global planning, chaotic particle swarm optimization (CPSO)-based route refinement, B-Spline trajectory smoothing, and exposure-dependent speed adaptation within a unified dynamic planning architecture. The framework represents the radiation field as a physically parameterized dose-rate map in mSv/h by combining inverse-square source decay with line-of-sight material attenuation through shielding materials. Route generation is therefore evaluated in terms of cumulative absorbed dose, path length, mission time, trajectory roughness, computational cost, success rate, and dynamic obstacle interaction. The proposed method is compared with Pure A*, Informed RRT*, A*-PSO, A*-CPSO, and a risk-aware A*+DWA baseline under identical seed sets and computational budgets. In static scenarios, the proposed method reduced cumulative absorbed dose by approximately 33.3%, 47.2%, and 21.4% compared with Pure A* under low-, medium-, and high-risk conditions, respectively. In dynamic scenarios, the corresponding dose reductions were approximately 32.5%, 41.4%, and 40.1%. Additional ablation, sensitivity, statistical significance, and latency analyses were conducted to isolate the contribution of each component and evaluate computational feasibility. The results show that the proposed framework provides a balanced trade-off between absorbed dose reduction, trajectory feasibility, mission time, and online replanning performance under the tested simulation conditions.
Open AccessRadiation-Aware Path Planning Framework for Mobile Robots in Dynamic Hazardous Environments
This study presents a radiation-aware path planning framework for mobile robots operating in hazardous environments containing radiation sources, shielding structures, and moving obstacles. The proposed method integrates A*-based global planning, chaotic particle swarm optimization (CPSO)-based route refinement, B-Spline trajectory smoothing, and exposure-dependent speed adaptation within a unified dynamic planning architecture. The framework represents the radiation field as a physically parameterized dose-rate map in mSv/h by combining inverse-square source decay with line-of-sight material attenuation through shielding materials. Route generation is therefore evaluated in terms of cumulative absorbed dose, path length, mission time, trajectory roughness, computational cost, success rate, and dynamic obstacle interaction. The proposed method is compared with Pure A*, Informed RRT*, A*-PSO, A*-CPSO, and a risk-aware A*+DWA baseline under identical seed sets and computational budgets. In static scenarios, the proposed method reduced cumulative absorbed dose by approximately 33.3%, 47.2%, and 21.4% compared with Pure A* under low-, medium-, and high-risk conditions, respectively. In dynamic scenarios, the corresponding dose reductions were approximately 32.5%, 41.4%, and 40.1%. Additional ablation, sensitivity, statistical significance, and latency analyses were conducted to isolate the contribution of each component and evaluate computational feasibility. The results show that the proposed framework provides a balanced trade-off between absorbed dose reduction, trajectory feasibility, mission time, and online replanning performance under the tested simulation conditions.
- 3 July 2026
- Published by Springer Nature in Welding in the World
- Vol. 70 (8) , 1-14
Lightweight denoising autoencoder for real-time weld seam tracking on reflective metals
- 3 July 2026
- Published by Springer Nature in Welding in the World
- Vol. 70 (8) , 1-14
Lightweight denoising autoencoder for real-time weld seam tracking on reflective metals
- 7 May 2026
- Published by Omer Halisdemir Universitesi in Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi
- Vol. 17
Evaluation of real-time controller performance through experimental analysis under disturbance in a one-DOF copter
One-degree-of-freedom copters, capable of a single rotational motion, are widely used as preliminary platforms for testing control strategies of lightweight rotary-wing aircraft due to their simplicity and low cost. In this study, the dynamic model of a one-degree-of-freedom copter was derived and linearized. The controller gains for the methods of Linear Quadratic Regulator (LQR) and state feedback controller by pole placement were calculated and tested through the simulations with a unit step input. Performances were evaluated using the Integral of Absolute Error (IAE) index, and LQR achieved superior results compared to pole placement. Furthermore, a feedback linearization (FL) controller based on the nonlinear model was designed and compared with LQR under sinusoidal input in the presence of nearly square-wave-like disturbances. The results with respect to the IAE index demonstrated that the FL controller offered better tracking and robustness, highlighting the advantage of incorporating the nonlinear effects in the controller design. The proposed controllers were implemented and validated on Acrome One-DOF copter, a real-time experimental setup platform using a myRIO-based control system.
- 7 May 2026
- Published by Omer Halisdemir Universitesi in Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi
- Vol. 17
Evaluation of real-time controller performance through experimental analysis under disturbance in a one-DOF copter
One-degree-of-freedom copters, capable of a single rotational motion, are widely used as preliminary platforms for testing control strategies of lightweight rotary-wing aircraft due to their simplicity and low cost. In this study, the dynamic model of a one-degree-of-freedom copter was derived and linearized. The controller gains for the methods of Linear Quadratic Regulator (LQR) and state feedback controller by pole placement were calculated and tested through the simulations with a unit step input. Performances were evaluated using the Integral of Absolute Error (IAE) index, and LQR achieved superior results compared to pole placement. Furthermore, a feedback linearization (FL) controller based on the nonlinear model was designed and compared with LQR under sinusoidal input in the presence of nearly square-wave-like disturbances. The results with respect to the IAE index demonstrated that the FL controller offered better tracking and robustness, highlighting the advantage of incorporating the nonlinear effects in the controller design. The proposed controllers were implemented and validated on Acrome One-DOF copter, a real-time experimental setup platform using a myRIO-based control system.
- Open Access
- 22 April 2026
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 144 (5-6) , 4401-4419
Enhanced precision in seam tracking sensors via adaptive refinement and fixed-geometry laser triangulation
- 22 April 2026
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 144 (5-6) , 4401-4419
Open AccessEnhanced precision in seam tracking sensors via adaptive refinement and fixed-geometry laser triangulation
- 30 September 2025
- Published by Hitit University in Hittite Journal of Science and Engineering
- Vol. 12 (3) , 111-120
Design and Vision-Based Control of a Low-Cost SCARA Robot
SCARA robots are widely used in industrial automation due to their high precision and speed, particularly in pick-and-place operations. In addition to conventional programming approaches, alternative vision-based control methods have gained interest to enhance flexibility and efficiency in robotic applications. This study presents the design and implementation of a Position-Based Visual Servoing (PBVS) for the SCARA robot system capable of detecting and manipulating objects in real-time. The proposed system consists of a fixed overhead camera, a SCARA robot, and Python-based control software. The software integrates image processing algorithms, kinematic calculations, and motor control, enabling the robot to autonomously identify objects, compute their positions, and execute pick and place tasks. To enhance object detection accuracy, Kuwahara filtering, Canny edge detection, morphological transformations, and connected component analysis were applied. Experimental results demonstrated that the combination of Kuwahara filtering and Canny edge detection achieved the lowest MSE error (8.45%), ensuring precise object localization. Furthermore, inverse kinematics was employed to generate accurate joint movements, allowing smooth and reliable grasping operations. The system was tested through 100 pick-and-place trials, achieving a 100% grasping success rate when Kuwahara filtering was applied. The experimental findings confirm that vision-based control significantly improves SCARA robot performance, making it suitable for automated assembly, material handling, and quality control applications.
- 30 September 2025
- Published by Hitit University in Hittite Journal of Science and Engineering
- Vol. 12 (3) , 111-120
Design and Vision-Based Control of a Low-Cost SCARA Robot
SCARA robots are widely used in industrial automation due to their high precision and speed, particularly in pick-and-place operations. In addition to conventional programming approaches, alternative vision-based control methods have gained interest to enhance flexibility and efficiency in robotic applications. This study presents the design and implementation of a Position-Based Visual Servoing (PBVS) for the SCARA robot system capable of detecting and manipulating objects in real-time. The proposed system consists of a fixed overhead camera, a SCARA robot, and Python-based control software. The software integrates image processing algorithms, kinematic calculations, and motor control, enabling the robot to autonomously identify objects, compute their positions, and execute pick and place tasks. To enhance object detection accuracy, Kuwahara filtering, Canny edge detection, morphological transformations, and connected component analysis were applied. Experimental results demonstrated that the combination of Kuwahara filtering and Canny edge detection achieved the lowest MSE error (8.45%), ensuring precise object localization. Furthermore, inverse kinematics was employed to generate accurate joint movements, allowing smooth and reliable grasping operations. The system was tested through 100 pick-and-place trials, achieving a 100% grasping success rate when Kuwahara filtering was applied. The experimental findings confirm that vision-based control significantly improves SCARA robot performance, making it suitable for automated assembly, material handling, and quality control applications.
- Open Access
- 24 December 2023
- Published by SCI AND TECH UNIVERSAL INC in Scientia Iranica
- Vol. 31 (16) , 1420-1430
Modeling and Real-Time Cartesian Impedance Control of 3-DOF Robotic Arm in Contact with the Surface
Robotic arms have become increasingly popular and widely used in various industrial applications. However, conventional control methods are not capable of adequately controlling a robotic arm in tasks that require contact with a surface. To address this issue, this study proposes a Cartesian impedance control method to control a 3-DOF robotic arm in real-time during contact with a surface. The proposed controller consists of two control loops: an inner loop and an outer loop. The inner loop utilizes a motion control method in the joint space, with the parameters of the controller being calculated through system identification. The outer loop implements Cartesian impedance control in the Cartesian space using a mass-spring-damper model. The coefficients of the Cartesian impedance control were determined based on the over-damped response with real-time applications. By selecting the inner loop in the joint space and the outer loop in the Cartesian space, the control of the robotic arm is guaranteed. The proposed method was tested in real-time, and its performance was compared with the PID with gravity compensation control in the Cartesian space. The results indicated that the proposed method was able to successfully follow reference trajectories and reduce the contact force.
- 24 December 2023
- Published by SCI AND TECH UNIVERSAL INC in Scientia Iranica
- Vol. 31 (16) , 1420-1430
Open AccessModeling and Real-Time Cartesian Impedance Control of 3-DOF Robotic Arm in Contact with the Surface
Robotic arms have become increasingly popular and widely used in various industrial applications. However, conventional control methods are not capable of adequately controlling a robotic arm in tasks that require contact with a surface. To address this issue, this study proposes a Cartesian impedance control method to control a 3-DOF robotic arm in real-time during contact with a surface. The proposed controller consists of two control loops: an inner loop and an outer loop. The inner loop utilizes a motion control method in the joint space, with the parameters of the controller being calculated through system identification. The outer loop implements Cartesian impedance control in the Cartesian space using a mass-spring-damper model. The coefficients of the Cartesian impedance control were determined based on the over-damped response with real-time applications. By selecting the inner loop in the joint space and the outer loop in the Cartesian space, the control of the robotic arm is guaranteed. The proposed method was tested in real-time, and its performance was compared with the PID with gravity compensation control in the Cartesian space. The results indicated that the proposed method was able to successfully follow reference trajectories and reduce the contact force.
- 30 June 2021
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 25 (3) , 849-857
Real Time Control Application of the Robotic Arm Using Neural Network Based Inverse Kinematics Solution
Robotic arms are widely used in many industrial applications at present. The control of robotic arms involves position coordination Cartesian space by a forward/inverse kinematics solution method. The inverse kinematics is difficult for real-time control applications, computational requirements are intensive and the run-time is high. The traditional solution methods used geometric, algebraic, and numerical iterative techniques are inadequate and slow in the inverse kinematics solution. Recently, alternative solution methods based on artificial intelligence techniques have been developed to solve the inverse kinematics problem. In this study, a multi-layered feed-forward Artificial Neural Network model was developed to solve the inverse kinematics of the 5 degrees of freedom robotic arm. Using the Proportional-Integral control algorithm combined with this Artificial Neural Network model, the real-time position control of the robotic arm was accomplished. The obtained results were compared with the PI control supported by an analytical inverse kinematics solution in real-time. The results showed that the PI control combined with Artificial Neural Network has superior tracking ability, smaller control error, and better absolute fit to the reference.
- 30 June 2021
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 25 (3) , 849-857
Real Time Control Application of the Robotic Arm Using Neural Network Based Inverse Kinematics Solution
Robotic arms are widely used in many industrial applications at present. The control of robotic arms involves position coordination Cartesian space by a forward/inverse kinematics solution method. The inverse kinematics is difficult for real-time control applications, computational requirements are intensive and the run-time is high. The traditional solution methods used geometric, algebraic, and numerical iterative techniques are inadequate and slow in the inverse kinematics solution. Recently, alternative solution methods based on artificial intelligence techniques have been developed to solve the inverse kinematics problem. In this study, a multi-layered feed-forward Artificial Neural Network model was developed to solve the inverse kinematics of the 5 degrees of freedom robotic arm. Using the Proportional-Integral control algorithm combined with this Artificial Neural Network model, the real-time position control of the robotic arm was accomplished. The obtained results were compared with the PI control supported by an analytical inverse kinematics solution in real-time. The results showed that the PI control combined with Artificial Neural Network has superior tracking ability, smaller control error, and better absolute fit to the reference.