Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yang Wang has a total of 52 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Optoelectronic performance enhancement of 1–5 μ m InGaN-based micro-LEDs using chemical etching coupled with dielectric passivation

    by Qin Wang, Jinyu Zhang, Guojian Ding, Yang Wang, Zhen Deng, Yang Jiang, Wenxin Wang, Hong Chen, Chunhua Du, Haiqiang Jia

    Although InGaN-based micro-light-emitting diodes (micro-LEDs) have been extensively studied as key components for next-generation display technologies, the performance of micro-LEDs smaller than 5 μm remains severely constrained by the sidewall effect, posing an urgent challenge to be addressed. This study successfully fabricated InGaN-based micro-LEDs with dimensions ranging from 1 to 5 μm by introducing a coupled chemical etching with dielectric passivation technique. It is revealed that the peak external quantum efficiency (EQE) of all devices significantly improved after coupled chemical etching, while their surface recombination velocity decreased significantly. Moreover, this enhancement in peak EQE becomes more pronounced as the device size decreases from 5 to 1 μm. APSYS simulations further indicate that as the sidewall defect density decreases, the distribution of holes across different quantum wells becomes more uniform, and the radiative recombination rate relative to the Shockley–Read–Hall rate significantly increases, which is in excellent agreement with the experimental results. More importantly, the peak EQE of 1 and 5 μm micro-LEDs reached 14.01% and 40.46%, respectively, increasing by 363% and 151% compared to that without coupled chemical etching. These findings validate the effectiveness of chemical etching coupled with dielectric passivation technology in micro-LED manufacturing, and also reveal the significant impact of sidewall defects in size-dependent efficiency.

  • First observations of avalanche-like behavior in p-GaN gate HEMTs with the buffer avalanche triggered layer

    by Cheng Yu, Wanjun Chen, Fangzhou Wang, Zhuocheng Wang, Xiaochuan Deng, Zheyu Huang, Ruize Sun, Bo Zhang, Guojian Ding, Haiqiang Jia, et al.

    A p-GaN gate high electron mobility transistor with the buffer avalanche triggered layer (BATL-HEMT) is experimentally demonstrated to exhibit repetitive avalanche-like behavior. One of the major limitations of conventional HEMTs is their limited avalanche capability, primarily due to the absence of an efficient removal path for the holes generated during avalanche breakdown. The local accumulation of these holes can indirectly induce severe thermal degradation, ultimately leading to potential device failure. However, in the proposed device, the unique P++P−−N++ structure initiates an avalanche effect within the buffer layer, thereby activating the established hole energy dissipation pathway. Under multiple repeated breakdown testing, the device can instantaneously dissipate high current densities without observable thermal degradation. Additionally, temperature-dependent breakdown measurements show that the BATL-HEMT exhibits a positive temperature coefficient characteristic of avalanche breakdown.

  • Open Access

    Achieving ultralow leakage current in Schottky-MIS cascode anode lateral field-effect diode based on AlGaN/GaN HEMT

    by Fangzhou Wang, Changhong Gao, Guojian Ding, Cheng Yu, Zhuocheng Wang, Xiaohui Wang, Qi Feng, Ping Yu, Peng Zuo, Wanjun Chen, et al.

    In this paper, we design and fabricate a Schottky-metal-insulator-semiconductor (MIS) cascode anode GaN lateral field-effect diode (CA-LFED) to achieve ultralow reverse leakage current ( I LEAK ). The device based on AlGaN/GaN high-electron-mobility-transistor (HEMT) includes a normally-off MIS-controlled channel that is cascoded with a high barrier height Schottky contact. At reverse bias, the high electric-field is effectively prevented by the normally-off MIS-controlled channel edge. Together with the high barrier height Schottky contact, this feature significantly suppresses the I LEAK . Supported by the device fabrication, the CA-LFED with high breakdown voltage (BV) > 600 V shows an ultralow I LEAK of 3.6 × 10 −9 A/mm as well as a low forward voltage drop ( V F ) of 2.2 V. The performance suggests that the CA-LFED can be a promising candidate for ultralow I LEAK and better V F - I LEAK trade-off GaN power diode applications.


  • Open Access

    Optimizing Forward Drop and Reverse Leakage Trade‐Off in AlGaN/GaN Lateral Diode with Schottky‐Metal‐Insulator‐Semiconductor Cascode Anode

    by Fangzhou Wang, Changhong Gao, Guojian Ding, Cheng Yu, Zhuocheng Wang, Xiaohui Wang, Qi Feng, Ping Yu, Peng Zuo, Yang Wang, et al.

    Herein, AlGaN/GaN lateral diode with the Schottky‐Metal‐Insulator‐Semiconductor (MIS) cascode anode (CALD) to optimize forward voltage drop (VF) and reverse leakage current (ILEAK) trade‐off is proposed. In the CALD device, a normally‐on Ni/HfO2/AlGaN MIS‐controlled channel as well as a lateral Ni/GaN Schottky contact are cascoded at the anode. The designed normally‐on MIS‐controlled channel has high electron concentration at forward bias and prevents high electric‐field at reverse bias, which ensure both low VF and low ILEAK. Meanwhile, the Ni/GaN Schottky contact with a high Schottky barrier height further suppresses the ILEAK. As a result, the fabricated CALD demonstrates an optimized VF–ILEAK trade‐off relationship, including a low VF of 1.6 V and a low ILEAK of 5.2 × 10−8 A mm−1 (at reverse voltage of 400 V), together with a high breakdown voltage (BV) >700 V. These high performances suggest that the CALD can be a promising candidate for GaN power diode applications requiring a better VF–ILEAK trade‐off.

  • Over 2 GW/cm2 low-conduction loss Ga2O3 vertical SBD with self-aligned field plate and mesa termination

    by Xiaorui Xu, Yicong Deng, Titao Li, Duanyang Chen, Fangzhou Wang, Cheng Yu, Hongji Qi, Yang Wang, Haizhong Zhang, Xiaoqiang Lu

    In this Letter, a Ga2O3 vertical Schottky barrier diode (SBD) with self-aligned field plate and mesa termination is fabricated and studied. The combination of field plate and mesa termination can effectively make the electric field distribution uniform in the termination, and thus the proposed SBD features high breakdown voltage (BV). Moreover, to eliminate alignment deviation and simplify the fabrication process, a self-aligned etching process is developed. The experimental results show that a low specific on-resistance of 4.405 mΩ·cm2 and a high BV of 3113 V can be simultaneously derived on the proposed SBD, yielding a high power figure of merit of 2.2 GW/cm2. Meanwhile, a considerably low forward voltage of 1.53 V at 100 A/cm2 is also achieved, demonstrating the low conduction loss of the device.


  • Open Access

    Normally-Off p-GaN Gate High-Electron-Mobility Transistors with the Air-Bridge Source-Connection Fabricated Using the Direct Laser Writing Grayscale Photolithography Technology

    by Yujian Zhang, Guojian Ding, Fangzhou Wang, Ping Yu, Qi Feng, Cheng Yu, Junxian He, Xiaohui Wang, Wenjun Xu, Miao He, et al.

    In this work, we used the Direct Laser Writing Grayscale Photolithography technology to fabricate a normally-off p-GaN gate high-electron-mobility transistor with the air-bridge source-connection. The air-bridge source-connection was formed using the Direct Laser Writing Grayscale Photolithography, and it directly connected the two adjacent sources and spanned the gate and drain of the multi-finger p-GaN gate device, which featured the advantages of stable self-support and large-span capabilities. Verified by the experiments, the fabricated air-bridge p-GaN gate devices utilizing the Direct Laser Writing Grayscale Photolithography presented an on-resistance of 36 Ω∙mm, a threshold voltage of 1.8 V, a maximum drain current of 240 mA/mm, and a breakdown voltage of 715 V. The results provide beneficial design guidance for realizing large gate-width p-GaN gate high-electron-mobility transistor devices.


  • High Voltage Normally-Off p-GaN Gate HEMT with the Compatible High Threshold and Drain Current

    by Cheng Yu, Fangzhou Wang, Junxian He, Yujian Zhang, Ruize Sun, Wenjun Xu, Guojian Ding, Qi Feng, Xiaohui Wang, Yang Wang, et al.

    In this paper, we demonstrate a high voltage normally-off p-GaN gate high-electron-mobility-transistor (HEMT) to realize the compatible high threshold voltage ( V TH ) and high drain current ( I D ) performance. With the optimization of the epitaxial structure, the presented device shows a significantly improved V TH . Meanwhile, by using the high-quality ALD-Al 2 O 3 passivation layer, the high I D is also realized in the device because of the access region resistance reduction. Supported by the device fabrication, the p-GaN gate HEMT delivers a V TH = 3.2 V measured by linear extrapolation, a relatively large saturation I D ( I D_SAT ) of 246 mA mm −1 , and a high breakdown voltage ( BV ) of 1830 V at 1 mA mm −1 . Among various p-GaN gate HEMTs with the I D_SAT over 200 mA mm −1 , the fabricated p-GaN gate HEMT has a competitive V TH . The results suggest that the proposed device could be a promising candidate in high V TH and I D power electronics.