Mohamed Abdelbaky
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mohamed Abdelbaky has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
A. H. Oraby
Physics Department, Faculty of Science, Mansoura University, Mansoura, Egypt
2 shared publicationsA. M. Abdelghany
Spectroscopy Department, Physics Research Institute, National Research Centre, Giza, Egypt
2 shared publicationsE. M. Abdelrazek
Physics Department, Faculty of Science, Mansoura University, Mansoura, Egypt
2 shared publicationsM. M. Rashad
Electronic & Magnetic Materials Department, Advanced Materials Institute, Central Metallurgical Research and Development Institute (CMRDI), Cairo, Egypt
2 shared publicationsA.H. Oraby
Horus Univ, Basic & Appl Sci Dept, Int Coastal Rd,New Damietta, Kafr Saad 34511, Damietta Govern, Egypt
1 shared publicationA.M. Abdelghany
Natl Res Ctr, Phys Res Inst, Spect Dept, 33 ElBehouth St, Giza 12311, Egypt
1 shared publication
Latest Publications
- Open Access
- 20 June 2025
- Published by Springer Nature in Applied Water Science
- Vol. 15 (7) , 1-13
Ultraviolet-stimulated photocatalysis of crystal violet using (Gd(2-x)La(x)Zr(2-x)Sn(x)O7) pyrochlore nanoparticles
The development of improved photocatalytic materials for the effective destruction of crystal violet under UV irradiation has been a crucial focus in water purification research. The advanced oxidation process, specifically the Fenton-like process, proved an excellent efficiency with the degradation of organic dyes such as crystal violet. Gd(2-x)La(x)Zr(2-x)Sn(x)O7 pyrochlore nanopowder is successfully prepared by sol–gel auto-combustion method where (x = 0.1, 0.2, 0.3, and 0.5). Various characterization techniques have been utilized for studying the prepared nanopowder, such as Fourier transform infrared (FTIR), X-ray diffraction (XRD), ultraviolet–visible (UV–visible), and transmission electron microscope (TEM). Moreover, to ensure the efficiency of the photocatalysis process, unknown concentrations were determined using the visible spectrophotometer. At the completion of the purifying process (90 min), photocatalysis processes containing pyrochlore (Gd(2-x)La(x)Zr(2-x)Sn(x)O7) and H2O2 or H2O2 alone are identical; nevertheless, the first one has significant benefits throughout the purification period based on C/C0 values.
- 20 June 2025
- Published by Springer Nature in Applied Water Science
- Vol. 15 (7) , 1-13
Open AccessUltraviolet-stimulated photocatalysis of crystal violet using (Gd(2-x)La(x)Zr(2-x)Sn(x)O7) pyrochlore nanoparticles
The development of improved photocatalytic materials for the effective destruction of crystal violet under UV irradiation has been a crucial focus in water purification research. The advanced oxidation process, specifically the Fenton-like process, proved an excellent efficiency with the degradation of organic dyes such as crystal violet. Gd(2-x)La(x)Zr(2-x)Sn(x)O7 pyrochlore nanopowder is successfully prepared by sol–gel auto-combustion method where (x = 0.1, 0.2, 0.3, and 0.5). Various characterization techniques have been utilized for studying the prepared nanopowder, such as Fourier transform infrared (FTIR), X-ray diffraction (XRD), ultraviolet–visible (UV–visible), and transmission electron microscope (TEM). Moreover, to ensure the efficiency of the photocatalysis process, unknown concentrations were determined using the visible spectrophotometer. At the completion of the purifying process (90 min), photocatalysis processes containing pyrochlore (Gd(2-x)La(x)Zr(2-x)Sn(x)O7) and H2O2 or H2O2 alone are identical; nevertheless, the first one has significant benefits throughout the purification period based on C/C0 values.
- Open Access
- 26 June 2023
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 33 (10) , 3304-3314
Degradation of Crystal Violet Using Gadolinium Zirconium Oxide (Gd2Zr2O7) Nanoparticles
The demand for clean water free of pollution has become an urgent priority for humanity. Gd2Zr2O7 nanoparticles were successfully synthesized via sol–gel auto combustion as a type of pyrochlore to be used in the dye phytoremediation using a Fenton-like approach. Gd2Zr2O7 nanoparticles have been successfully prepared using a sol–gel auto-combustion strategy. The annealing process was performed in a furnace at 1100 °C for 2 h to form defect-fluorite structured Gd2Zr2O7 with space group Fm-3m. XRD analysis revealed that synthesized Gd2Zr2O7 nanoparticles were found to have crystallite sizes with lattice parameters of 28.5 nm and 10.524 + 0.02 Å, respectively. TEM micrographs showed the presence of a cubic-like structure with a size of about 17 nm. The band gap energy of the synthesized powders was found to be 3.8 eV relating to the impact of the crystallite size. The generated nanoparticles finally show a significant photo Fenton catalytic activity with an efficiency of 90% for the photocatalysis of crystal violet dye after 60 min. It was determined that the substantial absorption of Gd2Zr2O7 in the visible-light region, which was synergistically activated by both Gd3+ and Zr4+ ions, was the cause of the large surface area of the scattered microstructure and reactive OH. formation.
- 26 June 2023
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 33 (10) , 3304-3314
Open AccessDegradation of Crystal Violet Using Gadolinium Zirconium Oxide (Gd2Zr2O7) Nanoparticles
The demand for clean water free of pollution has become an urgent priority for humanity. Gd2Zr2O7 nanoparticles were successfully synthesized via sol–gel auto combustion as a type of pyrochlore to be used in the dye phytoremediation using a Fenton-like approach. Gd2Zr2O7 nanoparticles have been successfully prepared using a sol–gel auto-combustion strategy. The annealing process was performed in a furnace at 1100 °C for 2 h to form defect-fluorite structured Gd2Zr2O7 with space group Fm-3m. XRD analysis revealed that synthesized Gd2Zr2O7 nanoparticles were found to have crystallite sizes with lattice parameters of 28.5 nm and 10.524 + 0.02 Å, respectively. TEM micrographs showed the presence of a cubic-like structure with a size of about 17 nm. The band gap energy of the synthesized powders was found to be 3.8 eV relating to the impact of the crystallite size. The generated nanoparticles finally show a significant photo Fenton catalytic activity with an efficiency of 90% for the photocatalysis of crystal violet dye after 60 min. It was determined that the substantial absorption of Gd2Zr2O7 in the visible-light region, which was synergistically activated by both Gd3+ and Zr4+ ions, was the cause of the large surface area of the scattered microstructure and reactive OH. formation.
- Open Access
- 12 May 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-18
Efficacious elimination of crystal violet pollutant via photo-Fenton process based on Gd(2−x)La(x)Zr2O7 nanoparticles
The photo-Fenton process is an appropriate method of the Advanced Oxidation Process that is used in the photocatalysis of organic dyes like crystal violet (CV). La3+ ion substituted gadolinium zirconium oxide Gd(2−x)La(x)Zr2O7 nanopowders (x = 0.1, 0.2, 0.3, and 0.5) have been successfully prepared by using sol–gel auto-combustion method to be used for the efficient photocatalysis of CV with photo-Fenton process. The well-crystallized defect-fluorite, structured with space group: Fm-3m, was detected using X-ray diffraction analysis. The lattice parameters were found to increase with the evaluated La3+ ion concentration. The grain size of the synthesized powders increased with the increase in La3+ ion content. The SAED patterns depicted fluorite structured fluorite. UV/Vis. spectrophotometer was used for the determination of band gap energy of Gd(2−x)La(x)Zr2O7 nanopowders which increased with increasing La3+ ion content. It was found to enhance from 4 to 3.6 eV. The visible spectrophotometer was used for determining unknown concentrations during the photocatalysis process to assure the effectiveness of the process. Overall, results illustrate that the photo-Fenton reaction on Gd(2−x)La(x)Zr2O7 performed excellently in removing crystal violet (CV). The photo-remediation ratio of CV reached 90% within 1 h.
- 12 May 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-18
Open AccessEfficacious elimination of crystal violet pollutant via photo-Fenton process based on Gd(2−x)La(x)Zr2O7 nanoparticles
The photo-Fenton process is an appropriate method of the Advanced Oxidation Process that is used in the photocatalysis of organic dyes like crystal violet (CV). La3+ ion substituted gadolinium zirconium oxide Gd(2−x)La(x)Zr2O7 nanopowders (x = 0.1, 0.2, 0.3, and 0.5) have been successfully prepared by using sol–gel auto-combustion method to be used for the efficient photocatalysis of CV with photo-Fenton process. The well-crystallized defect-fluorite, structured with space group: Fm-3m, was detected using X-ray diffraction analysis. The lattice parameters were found to increase with the evaluated La3+ ion concentration. The grain size of the synthesized powders increased with the increase in La3+ ion content. The SAED patterns depicted fluorite structured fluorite. UV/Vis. spectrophotometer was used for the determination of band gap energy of Gd(2−x)La(x)Zr2O7 nanopowders which increased with increasing La3+ ion content. It was found to enhance from 4 to 3.6 eV. The visible spectrophotometer was used for determining unknown concentrations during the photocatalysis process to assure the effectiveness of the process. Overall, results illustrate that the photo-Fenton reaction on Gd(2−x)La(x)Zr2O7 performed excellently in removing crystal violet (CV). The photo-remediation ratio of CV reached 90% within 1 h.