ARAulia Dewi Rosanti

Aulia Dewi Rosanti

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Aulia Dewi Rosanti has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Efisiensi Aplikasi Nanofluid Urea pada Pertumbuhan dan Hasil Tanaman Jagung Manis (Zea mays L. Saccharata Sturt)

    by Junaidi Rio Syamsudin, Aulia Dewi Rosanti, Widyana Rahmatika, Nur Fitriyah, Fahmi Hidayat

    Peningkatan impor jagung manis sebesar 125,1% pada tahun 2024 mengindikasikan bahwa produksi dalam negeri belum optimal. Rendahnya efisiensi pupuk urea akibat kehilangan nitrogen melalui hidrolisis dan volatilisasi menjadi salah satu faktor pembatas produktivitas tanaman. Nanofluid urea merupakan inovasi pemupukan yang berpotensi meningkatkan efisiensi penggunaan nitrogen. Penelitian ini bertujuan untuk mengetahui pengaruh efisiensi aplikasi nanofluid urea pada pertumbuhan dan hasil tanaman jagung manis. Percobaan ini menggunakan rancangan acak kelompok (RAK) non faktorial dengan perlakuan 100% NFU (Nanofluid Urea); 70% NFU (Nanofluid Urea) + 30% UKv (Urea Konvensional); 60% NFU (Nanofluid Urea) + 40% UKv (Urea Konvensional); 50% NFU (Nanofluid Urea) + 50% UKv (Urea Konvensional); 40% NFU (Nanofluid Urea) + 60% UKv (Urea Konvensional); 30% NFU (Nanofluid Urea) + 70% UKv (Urea Konvensional) ; 100% UKv (Urea Konvensional). Hasil menunjukkan partikel urea dengan ukuran nanofluid urea 14,832 nm tidak memberikan pengaruh nyata terhadap pertumbuhan akan tetapi dapat meningkatkan hasil panen yang signifikan dengan bobot panen 25,63 ton/ha pada perbandingan persentase 60% nanofluid urea dan 40% urea konvensional.

  • Open Access

    Pengaruh Jenis Kulit Pisang Terhadap Kandungan Kalium dalam Pembuatan Pupuk Nano Kalium Sulfat

    by Aulia Dewi Rosanti, Fahmi Hidayat, Qumillaila Qumillaila

    Kulit pisang merupakan limbah organik yang berpotensi tinggi sebagai sumber kalium alami untuk pembuatan pupuk ramah lingkungan. Penelitian ini bertujuan untuk mengetahui pengaruh jenis kulit pisang terhadap kandungan kalium yang dihasilkan pada proses sintesis pupuk nano kalium sulfat (K₂SO₄). Bahan yang digunakan terdiri atas tiga jenis kulit pisang, yaitu kulit pisang kepok, pisang raja, dan pisang raja nangka. Masing-masing sampel diekstraksi dan disintesis menjadi nano K₂SO₄ melalui proses presipitasi, kemudian dikarakterisasi menggunakan X-Ray Fluorescence (XRF) untuk menentukan komposisi unsur, serta didukung dengan analisis Scanning Electron Microscopy (SEM) untuk mengamati morfologi partikel. Hasil analisa XRF menunjukkan bahwa kulit pisang kepok memiliki kandungan kalium tertinggi sebesar 50,6% dan sulfur sebesar 49%, dengan kadar pengotor logam yang rendah (Fe 0,07% dan Cu 0,2%). Kulit pisang raja dan pisang raja nangka menunjukkan kandungan kalium masing-masing 29,1% dan 37%, disertai adanya unsur molibdenum (Mo) yang cukup tinggi. Berdasarkan hasil tersebut, dapat disimpulkan bahwa jenis kulit pisang kepok menghasilkan pupuk nano kalium sulfat dengan kandungan kalium paling tinggi dan kemurnian terbaik, sehingga paling potensial digunakan sebagai bahan dasar pembuatan pupuk nano berbasis K₂SO₄.

  • The effect of orange peel addition and orange peel-CTAB modification on the ability of ZnO to degrade methylene blue under UV irradiation

    by Aulia Dewi Rosanti, Eli Hendrik Sanjaya, Yuly Kusumawati, Fahmi Hidayat, Arif Fadlan, Karinda Septiyaningrum, Nani Farida, Habiddin Habiddin

    In the industry of textile, dyes can cause major environmental problems due to azo compounds contained as difficultly degraded material. To remove the synthetic In the industry of textile, dyes can cause major environmental problems due to azo compounds contained as difficultly degraded material. To remove the synthetic

  • The influence of pH variations of methyl orange and methylene blue dyes solutions in photodegradation process using ZnO and ZnO/MOP-CTAB materials

    by Aulia Dewi Rosanti, Yuly Kusumawati, Fahmi Hidayat, Arif Fadlan, Rizky Arief Shobirin, Asvikatus Sa’diyah

    This research aimed to study the degradation of Methyl Orange Dyes (MOD) and Methylene Blue Dyes (MBD) in different pH solutions using ZnO and ZnO/MOP-CTAB This research aimed to study the degradation of Methyl Orange Dyes (MOD) and Methylene Blue Dyes (MBD) in different pH solutions using ZnO and ZnO/MOP-CTAB


  • Open Access

    The Effect of Variations in Calcination Temperature on the Character of ZnO and ZnO/Mopl-CTAB in Degrading Methyl Orange

    by Aulia Dewi Rosanti, Fahmi Hidayat, Yuly Kusumawati, Arif Fadlan, Rizky Arief Shobirin, Fanni Kurnia Wijaya

    Medan orange peel (Mopl), which has been modified using cetyltrimethylammonium bromide (CTAB), has the potential to adsorb methyl orange (MO), and thus it can be used as a supporting material for ZnO. The ZnO is a photocatalytic material that is environmentally friendly, inexpensive, non-toxic, and has a wide band gap value. This study aims to determine the effect of calcination temperature on ZnO and ZnO characteristics due to modification using Mopl-CTAB and its effect on the degradation of MO. This research was carried out by synthesizing ZnO and ZnO/Mopl-CTAB materials using impregnation method and varying the calcination temperatures at 150, 250, 350, and 450 °C. The solid material powder obtained was characterized by using Scanning Electron Microscope-Energy Dispersive X-ray (SEM-EDX), Brunauer–Emmett–Teller (BET), Fourier Transform Infra Red (FTIR), X-ray Diffraction (XRD), and Diffuse Reflectance Spectroscopy (DRS). Based on the results of the characterization, greater calcination temperature can affect the characteristics of the photocatalyst, including its morphology, functional groups, crystal structure, crystal lattice, crystallinity, surface area, pore size, pore volume, and energy band gap. The MO photodegradation activity test using the synthesized material was conducted under dark and light conditions. The results of the test revealed that the best or optimum material to be used in degrading MO is a calcined material at 450 °C under light conditions. ZnO material using Mopl-CTAB is better in degrading ZnO/Mopl-CTAB 450 °C than ZnO 450 °C. This study found that ZnO material using Mopl-CTAB had a percent removal of 78% in 50 min, while ZnO 450 °C only had a percent removal of 53% in 40 min. The reaction kinetics in dark and light conditions follow the pseudo-second-order kinetic model. Copyright © 2023 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

  • Open Access

    The influence of orange peel-cetyltrimethylammonium bromide (CTAB) modification to increase ZnO photocatalyst ability for methyl orange degradation

    by Aulia Dewi Rosanti, Fahmi Hidayat, Yuly Kusumawati, Arif Fadlan, Rizky Arief Shobirin, Muchammad Achsanu Taqwim

    Methyl Orange (MO) is one of the dyestuffs that are often used in the textile industry. MO itself has non-biodegradable anionic properties and has the potential to cause hypersensitivity allergies, thus it potentially been dangerous, especially for aquatic environment. One of the methods which often used is photodegradation method. Photodegradation was a method that was easy to implement and relatively affordable. Additionally, dyes could be more easily decomposed into simpler components with the intention that being safer for the environment. This research aimed to degrade MO using ZnO composited with orange peel (OP) which had been modified with cetyltrimethylammonium bromide (CTAB) addition. CTAB itself served as template to increase surface area of the ZnO material, thereby increasing their photocatalytic activities. ZnO, ZnO/OP, and ZnO/OP-CTAB were characterized using FTIR, XRD, SEM-EDX, BET and DR-UV. The results showed that ZnO/OP-CTAB degraded MO more than both ZnO/OP and ZnO. It was achieved optimum condition for without UV irradiation method in 40 minutes treatment, where ZnO/OP-CTAB was able to degrade MO by 48% whereas ZnO/OP and ZnO were only by 40% and 28%, respectively. In with UV irradiation method the optimum condition was achieved for 50 minutes, which ZnO/OP-CTAB succeeded in degrading MO by 78% while ZnO/OP was 74%. This treatment gave different results for ZnO, which ZnO gave optimum performance with %removal of 40% for 40 minutes treatment. Based on the reaction kinetics, it was known that the photodegradation reaction of MO by ZnO, ZnO/OP, and ZnO/OP-CTAB followed the pseudo-second-order reaction kinetics model.

  • Open Access

    The effect of orange peel waste addition on ZnO characteristics and its ability to degrade methyl orange

    by Aulia Dewi Rosanti, Fahmi Hidayat, Yuly Kusumawati, Arif Fadlan, Anggita R.K Wardani, Eva Umi Latifah

    The development of the textile industry in Indonesia is rapid. It cause serious environmental problems because the dyes used in the textile industry are synthetic that is azo dyes. Azo dyes are non-biodegradable substances that pollute the environment if not processed. One of the azo dyes that is often used in the textile industry is Methyl Orange. Photodegradation is an inexpensive and environmentally friendly method of removing synthetic dyes. This study will discuss the effect of adding orange peel on the characterization of ZnO and the ability to degrade Methyl Orange. The results of the FTIR spectra showed an absorption in the area of 1430-1455 cm-1 that means the orange peel had been impregnated into ZnO and the more ZnO as added on orange peel, it may reduce the number of -OH and CH groups of the ZnO/OP composite. Based on the results of characterization using XRD, it is known that the addition of orange peel into ZnO did not damage the crystal structure and crystal form. The crystal structure of ZnO/OP formed was wurtzite with a hexagonal shape. The results of the characterization using DR-UV showed that the band gap energy of ZnO/OP was smaller than ZnO and the more ZnO was added, the wider the band gap of energy. ZnO/OP with a variation of 1:25 can degrade Methyl Orange more than ZnO that was 73% in 60 minutes.


  • Open Access

    Adsorption of Methylene Blue and Methyl Orange from Aqueous Solution using Orange Peel and CTAB-Modified Orange Peel

    by Aulia Dewi Rosanti̇, Yuly Kusumawati̇, Fahmi Hi̇dAyat, Arif Fadlan, Anggita R.K. Wardani̇, Herlina Agusyanti Anggraeni̇

    Cationic and anionic dyes are frequently used in industrial sectors and cause many environmental and health problems. Orange peel has the potential to absorb dye as an adsorbent. This study aimed to explore the adsorption of methylene blue (MB) as a cationic dye and methyl orange (MO) as an anionic dye using orange peel (OP) and its modification using cetyltrimethylammonium bromide (CTAB). OP and OP-CTAB biomass materials were characterized using FT-IR (Fourier transform infrared), surface area analysis using BET (Brunauer-Emmett-Teller) and SEM EDX (Scanning Electron Microscopy-Energy Dispersive X-Ray Spectroscopy). Based on the study results, OP has a microporous skin structure and OP-CTAB mesopores. Based on the effect of contact time, it is known that the best adsorption process on MB was to use OP adsorbent with the optimum amount of dye adsorbed produced at 50th minute that was 5.881 ppm, while the best adsorption process on MO was using OP-CTAB adsorbent with the optimum amount of dye was at 50th that was equal to 13.34 ppm. Based on the adsorption kinetics data, the adsorption of MO and MB dyes by OP and OP-CTAB followed the pseudo second order reaction kinetics model. The adsorption of MO and MB by both OP and OP-CTAB followed Langmuir's adsorption isotherm, meaning that the adsorption process in both MO and MB using OP and OP-CTAB appeared on homogeneous surface sites, while there was no interaction between adsorbate molecules and adjacent locations that means the adsorption process only occurred physically.