MKMehmet Özgün Korukçu

Mehmet Özgün Korukçu

*This is an algorithmically generated author record based on publicly available information.

Mehmet Özgün Korukçu has a total of 1 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Effect of Energy Management in Heating–Cooling Systems of Electric Vehicles on Charging and Range

    by Muhsin Kılıç, Mehmet Özgün Korukçu

    In this study, an energy management model for electric vehicles including the entire vehicle such as the cabin, electric motors, battery, and the heating–cooling system was prepared. The heating and cooling processes for electric vehicles were run according to the internationally recognized driving cycles as well as at constant speeds to investigate them under different ambient conditions. The heating–cooling processes were managed in line with the cabin temperature target determined by considering the comfort conditions. The energy consumption of each of the system elements and the system in the heating–cooling process in electric vehicles was analyzed. Under different operating conditions, the variation of cabin temperature with time, instantaneous power, and cumulative energy consumption was calculated. The effect of heating and cooling processes on energy consumption, charging rate, and range were analyzed and interpreted. The results showed that the heating–cooling system for the heating process consumed more energy when the ambient temperature decreased, and the charge consumption ratio as well as the range deformation rate increased to about 30% when the ambient temperature was –10 °C. Similarly, the heating–cooling system for the cooling process consumed more energy when the ambient temperature increased, and the charge consumption ratio as well as the range deformation rate reached up to 40% when the ambient temperature was 40 °C. When the outdoor conditions were close to the thermal comfort temperature of 23 °C inside the cabin, the total energy consumption and the range deformation rates were reduced to less than 10%.


  • Open Access

    MULTITHMT: A MATLAB Application for Multidimensional Transient Heat and Mass Transfer Processes

    by M. Özgün Korukçu

    Transient heat conduction and mass transfer have many applications in industry such as heating, cooling, cooking, quenching of steels, freezing, and convective drying of vegetables or fruits. A novel, interactive, and fast MATLAB application, named MULTITHMT, is improved to solve multidimensional transient heat and mass transfer problems. Exact solutions are obtained for infinite rectangular bars, short cylinders, rectangular prisms, and spherical geometries. Instantaneous temperature and moisture content at any location in the objects are obtained and temperature and moisture content at the final time are displayed in two- and three-dimensional graphics. Quenching of steel for rectangle bars and cooking of cylindrical or rectangular prism-shaped meat are represented for transient heat transfer. Cooling of spherical commercial bronze and iron is also investigated. For transient mass transfer, convective drying of rectangular prunes, bananas of short cylinders, and spherical cornelian cherries with different operational conditions is calculated. Drying of cubes with the same shape and different moisture diffusivities is investigated. MULTITHMT is the only program that uses exact solutions to calculate multidimensional heat and mass transfer problems in the available literature. It is also the only application that can calculate the target time with a given temperature or moisture content for any specific location in the studied multidimensional objects. This application can be used for educational purposes in several engineering departments and industrial applications where transient heat and mass transfer processes are needed.

  • Open Access

    Heat Transfer and Entropy Generation for Mixed Convection of Al2O3–Water Nanofluid in a Lid-Driven Square Cavity with a Concentric Square Blockage

    by M. Özgün Korukçu

    The present numerical investigation is focused on analyzing the characteristics of steady laminar mixed convection flow in a lid-driven square cavity, specifically considering the utilization of Al2O3–water nanofluid. The Al2O3–water nanofluid is assumed to be Newtonian and incompressible. Within the cavity, a square blockage is positioned at its center, which is subjected to isothermal heating. The blockage ratio of the square is B = 1/4, and the Grashof number is Gr = 100. The walls of the cavity are maintained at a constant temperature, Tc, while the square blockage remains at a constant temperature, Th. The primary objective of this study is to investigate the flow and heat transfer mechanisms, as well as the entropy generation within the cavity. This investigation is conducted for a range of Richardson numbers (0.01 ≤ Ri ≤ 100) and volume fractions of the nanofluid (0 ≤ ϕ ≤ 0.05). Several parameters are obtained and analyzed, including streamlines, isotherms, velocity variations on the vertical and horizontal midplanes, local Nusselt number variations on the surfaces of the square blockage, the average Nusselt number on the square blockage, and the total dimensionless entropy generation of the system. The results of the investigation revealed that both the average Nusselt number on the square blockage and the total dimensionless entropy generation of the system exhibit an increasing trend with an increasing volume fraction of the nanofluid and a decreasing Richardson number. Furthermore, correlations for the average Nusselt number and the total dimensionless entropy generation with the Richardson number, and the nanofluid volume fraction are derived.


  • Open Access

    Impact of Blade Modifications on the Performance of a Darrieus Wind Turbine

    by M. Özgün Korukçu

    Vertical axis wind turbines (VAWTs) are gaining increasing significance in the realm of renewable energy. One notable advantage they possess is their ability to operate efficiently in diverse wind conditions, including low-speed and turbulent winds, which are often prevalent in urban areas. In this study, dimples and pitch angles into the rotor blades are used to enhance the aerodynamic performance of a straight-bladed Darrieus turbine. To simulate the turbine’s rotation under transient conditions, computational fluid dynamics calculations are conducted in a two-dimensional setting. The unsteady Navier–Stokes equations are solved, and the k-ω SST turbulence model is employed to represent turbulent flow. The results of the simulation demonstrate that the application of a circular dimple on the pressure side of the blades, positioned at 0.25 of the chord length with a diameter of 0.08 chord length, leads to a 5.18% increase in the power coefficient at λ = 2.7, in comparison to a turbine with plain airfoils. Moreover, when an airfoil with both a dimple and a + 1° pitch angle is utilized, the turbine’s performance at λ = 2.7 improved by 7.17% compared to a plain airfoil, and by 1.8% compared to a dimpled airfoil without a pitch angle. Additionally, the impact of a double dimple on both the pressure and suction sides of the airfoil on turbine performance was investigated. It was discovered that the double-dimpled airfoil exhibited lower performance in comparison to a plain airfoil. The study showed that the utilization of both dimples and pitch angles for airfoils of a Darrieus turbine blade increases the power generated by the turbine.


  • Open Access

    A Graphical User Interface for Calculating Exergy Destruction for Combustion Reactions

    by M. Özgün Korukҫu

    The combustion of fuels has been studied by many researchers as it is used in a wide range of engineering applications. The chemical equilibrium approach served as the foundation for the investigation of combustion reactions. This article presents a software application designed to facilitate the calculation of combustion processes by calculating the combustion of 16 fuels among the common alkanes (CnH2n+2) and alcohols (CnH2n+1OH). The Ozan Combustion Calculator (OCC) offers a user-friendly and efficient graphical user interface (GUI) that allows users to easily input data and obtain results. The program was developed using MATLAB 2021a and LaTeX software, ensuring its reliability and accuracy. To perform these calculations, the program utilizes calculations of the thermophysical properties of fuels and water obtained from tables. The program consists of five modules, each serving a specific purpose. These modules calculate various parameters, such as the Adiabatic Flame Temperature, Exergy of Combustion with Dry Air, Exergy of Combustion with Moist Air, Energy of Combustion with Dry Air, and Energy of Combustion with Moist Air. Additionally, the program can be used to investigate the impact of relative humidity on the adiabatic flame temperature and exergy destruction. The results obtained from the calculations reveal that the adiabatic flame temperature exhibits a linear decrease as the relative humidity increases. On the other hand, exergy destruction demonstrates a quadratic increase with higher relative humidity values. The program derives mathematical relationships for the adiabatic flame temperature and exergy destruction with respect to relative humidity values, with a high regression coefficient (r2=0.999). The versatility of OCC makes it suitable for various applications. It can be utilized in university settings for both undergraduate- and graduate-level courses, providing students with a practical tool for studying combustion processes. Additionally, it finds applications in industrial settings for the design and optimization of combustors, gas turbines, and burners. The user-friendly interface and accurate calculations make OCC a valuable resource in the field of combustion engineering.

  • Solidity Optimization for an H-Darrieus Wind Turbine

    by Mehmet Özgün Korukçu

    Solidity is one of the main factors that influence the performance of a wind turbine. The solidity of an H-Darrieus wind turbine is optimized in terms of blade number, chord length, and rotor radius to get the maximum power coefficient using Taguchi L16 (4^3) array. Power coefficient values are calculated by the Double Multiple Stream Tube model by in house built MATLAB code according to Taguchi orthogonal array. The maximum power coefficient is found as 0.4728 for the two-bladed rotor with a chord length of 0.2 m and a radius of 2 m. Relation of maximum power coefficient respect to blade number, chord length, and rotor radius is derived. Predicted mean values of the maximum power coefficient are in agreement with calculated values. Furthermore, an equation for the maximum power coefficient is obtained for rotor solidity. Derived equations can be useful to estimate the maximum power coefficient values of H-Darrieus wind turbines.


  • Numerical modeling of heat and mass transfer characteristics during the forced convection drying of a square cylinder under strong blockage

    by M. Ozgun Korukcu

    Two-dimensional analysis of heat and mass transfer during drying of a square cylinder (SC) for confined flow with a strong blockage ratio (β = 0.8) was performed using the alternating direction implicit (ADI)-based software. The influence of Reynolds number (Re = 10–50) and moisture diffusivity number (D = 1 × 10−5 − 1 × 10−8 m2/s) on the heat and mass transfer mechanisms was investigated. The convective heat transfer coefficients on SC surfaces were obtained using a commercial software package. The moisture content distributions inside a SC under transient conditions were calculated using the ADI method. The calculations showed that a higher Reynolds number enhances the overall mean Nusselt number and heat transfer coefficient value. The largest mean Nusselt number and heat transfer coefficient values were obtained at the front face of the SC, which makes the greatest contribution to the overall mean Nusselt number and heat transfer coefficient values for all surfaces of the SC. The effect of Reynolds number on the overall drying time was also investigated. Low Reynolds number and moisture diffusivity values lead to an increase in the overall drying time (Δtod). For Re = 10, the Δtod values are 502.19 → 220288 s and for Re = 50, the Δtod values are 126.14 → 70353.21 s for a moisture diffusivity range of D = 1 × 10−5 − 1 × 10−8 m2/s. Δtod-Re = 10/Δtod-Re = 50 ratios are 3.98–3.89 and 3.13 for a moisture diffusivity range of D = 1 × 10−5 − 1 × 10−8 m2/s. Δtod-D2/Δtod-D1 is 7.47 for Re = 10, and Δtod-D3/Δtod-D2 is 7.63 for Re = 50, whereas Δtod-D3/Δtod-D1 is 438.66 for Re = 10, and Δtod-D3/Δtod-D1 is 557.74 for Re = 50. Additionally, iso-moisture contours of SC were presented and relations for Nusselt number and mass transfer coefficient values were derived.


  • Open Access

    2D Temperature Analysis of Energy and Exergy Characteristics of Laminar Steady Flow across a Square Cylinder under Strong Blockage

    by M. Ozgun Korukcu

    Energy and exergy characteristics of a square cylinder (SC) in confined flow are investigated computationally by numerically handling the steady-state continuity, Navier-Stokes and energy equations in the Reynolds number range of Re = 10–50, where the blockage ratio (β = B/H) is kept constant at the high level of β = 0.8. Computations indicated for the upstream region that, the mean non-dimensional streamwise (u/Uo) and spanwise (v/Uo) velocities attain the values of u/Uo = 0.840®0.879 and v/Uo = 0.236®0.386 (Re = 10®50) on the front-surface of the SC, implying that Reynolds number and blockage have stronger impact on the spanwise momentum activity. It is determined that flows with high Reynolds number interact with the front-surface of the SC developing thinner thermal boundary layers and greater temperature gradients, which promotes the thermal entropy generation values as well. The strict guidance of the throat, not only resulted in the fully developed flow character, but also imposed additional cooling; such that the analysis pointed out the drop of duct wall (y = 0.025 m) non-dimensional temperature values (ζ) from ζ = 0.387®0.926 (Re = 10®50) at xth = 0 mm to ζ = 0.002®0.266 at xth = 40 mm. In the downstream region, spanwise thermal disturbances are evaluated to be most inspectable in the vortex driven region, where the temperature values show decrease trends in the spanwise direction. In the corresponding domain, exergy destruction is determined to grow with Reynolds number and decrease in the streamwise direction (xds = 0®10 mm). Besides, asymmetric entropy distributions as well were recorded due to the comprehensive mixing caused by the vortex system.