ZLZhengfang Li

Zhengfang Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhengfang Li has a total of 50 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effect mechanisms of texture on formability during AA2024 aluminum alloy hot incremental sheet forming

    by Zhengfang Li, Hanzhi Zhang, Kaiguo Qian, Ling Chen, Zhengyuan Gao, Zhiguo An, Han Lin, Pengfei Sun, Zhong Ren, Zhengyang Qiao, et al.

  • Open Access

    Effect of Process Parameters on the Forming Limit Angle of AA2024 Aluminum Alloy in Belt-Heated Incremental Sheet Forming

    by Zhengyuan Gao, Zhibing Li, Zhengfang Li, Zhiguo An, Pengfei Sun, Zhong Ren, Jiang Li, Yi Zhang, Han Lin, Zhengyang Qiao

    In the belt-heated incremental sheet forming process, the influence of process parameters on the forming limit angle significantly affects the forming accuracy and quality of components. Through macro and micro experiments, this study comprehensively analyzed the effect of key process parameters on the forming limit angle and identified forming temperature, tool head diameter, and step down as the primary factors that enhance the forming limit angle. Building on this, the dislocation density and grain size of the material under various forming temperatures, tool head diameters, and step-down values were investigated, clarifying the influence of these parameters on dislocation density and grain size in belt-heated incremental sheet forming. Furthermore, the dislocation density and grain size in the cross-section of the deformed region were calculated through micro-tests, revealing the variation patterns of dislocation density and grain size under different process conditions. These findings verified the macro–micro mechanism of the effect of process parameters on the forming limit angle and led to the establishment of a control method for the forming limit angle in belt-heated incremental sheet forming.

  • Open Access

    Study on Incremental Sheet Forming Performance of AA2024 Aluminum Alloy Based on Adaptive Fuzzy PID Temperature Control

    by Zhengfang Li, Zhengyuan Gao, Kaiguo Qian, Lijia Liu, Jiangpeng Song, Shuang Wu, Li Liu, Xinhao Zhai

    The development of technology has driven a rising need for high-accuracy and high-efficiency manufacturing of low-volume products. Incremental forming technology, characterized by die-free flexibility and low production costs, can effectively replace stamping processes for manufacturing customized small-batch products. However, high-performance aluminum alloys generally exhibit poor room-temperature plasticity but excellent high-temperature plasticity, necessitating the integration of thermal-assisted methods for manufacturing such products. However, the temperature of the forming region will excessively rise without temperature control, which will affect the forming performance of the material in hot incremental sheet forming of AA2024-T4 aluminum alloy. This study focuses on AA2024-T4 aluminum alloy and proposes a uniform temperature control method for the electric hot tube-assisted incremental sheet forming process, incorporating an adaptive fuzzy PID algorithm. The temperature difference of the forming region is lower than 6% under the various temperatures. On this basis, the forming limit angle and the microstructure state of the material are analyzed, and the grain feature of the material exhibits significantly refined grains and the uniform fine grain distribution under 180 °C with the temperature control of the adaptive fuzzy PID algorithm.


  • Open Access

    Preheating Modeling of Forming Region and Design of Electrode Structure During Integral Electric Hot Incremental Forming

    by Zhengfang Li, Lijia Liu, Jiangpeng Song, Shuang Wu, Li Liu, Xinhao Zhai

    Recently, integral electric hot incremental forming technology has been proposed to form hard-to-form sheet metals and to eliminate some defects obtained through the local heating method via current, such as inhomogeneous temperature distribution, arc burns for the sheet and the tool, unsuitability for multistage forming, etc. However, the simulation of integral electric hot incremental forming involves coupled electro-thermal-mechanical analysis, which is difficult through existing simulation software. Meanwhile, the effect of the electrode structure on temperature distribution is not clear; therefore, a preheating flux model for Joule heat was proposed to simulate the temperature distribution of Ti-6Al-4V titanium alloy sheet in this work, which could simplify the coupled electro-thermal-mechanical analysis to the coupled thermal–mechanical simulation. Meanwhile, the effect of the electrode section and length on the temperature distribution was analyzed in detail, and then a design criterion for the electrode length was obtained during integral electric hot incremental forming.


  • Open Access

    Study on the influence of process parameters on forming accuracy in hot incremental forming of 5A03 aluminum alloy

    by Zhengyuan Gao, Zhibing Li, Zhengfang Li, Zhiguo An, Pengfei Sun, Zhong Ren, Jiang Li, Yi Zhang, Han Lin, Zhengyang Qiao

    Aluminum alloys are widely used in various fields due to their excellent material properties, but the forming of aerospace small-batch aluminum thin-walled structures at room temperature often faces challenges such as cracking, poor accuracy, or even failure. This study combines the incremental forming process with thermal-assisted techniques to effectively improve the forming accuracy of aluminum alloy materials, thereby meeting the needs for small-batch and customized product manufacturing. In thermal incremental forming, the material is subjected to complex multi-field coupling, including force field, thermal field, and structural field, leading to highly complex deformation behavior. Therefore, by combining macroscopic and microscopic approaches, this study investigates the influence of different process parameters on the forming accuracy of 5A03 aluminum alloy pyramid-shaped components and analyzes the impact of temperature on the microstructure of 5A03 aluminum alloy, thereby identifying the optimal process parameter combination for superior forming accuracy.

  • Open Access

    An Efficient Method for Counting Large-Scale Plantings of Transplanted Crops in UAV Remote Sensing Images

    by Huihua Wang, Yuhang Zhang, Zhengfang Li, Mofei Li, Haiwen Wu, Youdong Jia, Jiankun Yang, Shun Bi

    Counting the number of transplanted crops is a crucial link in agricultural production, serving as a key method to promptly obtain information on crop growth conditions and ensure the yield and quality. The existing counting methods primarily rely on manual counting or estimation, which are inefficient, costly, and difficult to evaluate statistically. Additionally, some deep-learning-based algorithms can only crop large-scale remote sensing images obtained by Unmanned Aerial Vehicles (UAVs) into smaller sub-images for counting. However, this fragmentation often leads to incomplete crop contours of some transplanted crops, issues such as over-segmentation, repeated counting, low statistical efficiency, and also requires a significant amount of data annotation and model training work. To address the aforementioned challenges, this paper first proposes an effective framework for farmland segmentation, named MED-Net, based on DeepLabV3+, integrating MobileNetV2 and Efficient Channel Attention Net (ECA-Net), enabling precise plot segmentation. Secondly, color masking for transplanted crops is established in the HSV color space to further remove background information. After filtering and denoising, the contours of transplanted crops are extracted. An efficient contour filtering strategy is then applied to enable accurate counting. This paper conducted experiments on tobacco counting, and the experimental results demonstrated that the proposed MED-Net framework could accurately segment farmland in UAV large-scale remote sensing images with high similarity and complex backgrounds. The contour extraction and filtering strategy can effectively and accurately identify the contours of transplanted crops, meeting the requirements for rapid and accurate survival counting in the early stage of transplantation.


  • Open Access

    Research on Magnetic Field of Permanent Magnet Rolls Arranged Periodically in Circumferential—Axial Direction

    by Yuhang Zhang, Mingjiang Jiang, Youdong Jia, Xinzhi Li, Zhengfang Li, Huihua Wang

    The separation of non-magnetic non-ferrous metals such as copper and aluminum from scrapped automobiles is a critical area of research due to the increasing number of end-of-life vehicles. Traditional eddy current separation methods have limitations, particularly in handling large-sized broken copper and aluminum parts. This paper proposes a novel magnetic roller model featuring a circumferential–axial periodic arrangement of permanent magnets. This study explores the external magnetic field distribution of this new roller design by constructing an equivalent current model, solving magnetic scalar potential equations, and employing simulation tools. The findings indicate that the new magnet array enhances both the magnetic field strength and the range of the external magnetic field, leading to improved separation efficiency of large-sized metal fragments. The results provide a theoretical basis for advancing the separation technology of large-sized broken copper and aluminum parts in scrapped automobiles, offering potential improvements in the recycling of non-ferrous metals from end-of-life vehicles.


  • Open Access

    Effect Analysis of Process Parameters on Geometric Dimensions during Belt-Heated Incremental Sheet Forming of AA2024 Aluminum Alloy

    by Zhengfang Li, Zhengyuan Gao, Zhiguo An, Han Lin, Pengfei Sun, Zhong Ren, Zhengyang Qiao, Yuhang Zhang, Youdong Jia

    The effect of process parameters on geometric dimensions is complex during belt-heated incremental sheet forming, leading to control difficulties in the geometric dimension of parts. In this study, the geometric errors were analyzed under the action of different process parameters, and the corresponding influence law was obtained through macro- and microexperiments. On this basis, the micromorphology of the deformation region section was analyzed in detail, and the effect of process parameters on micromorphology characteristics was obtained during belt-heated incremental sheet forming. Meanwhile, the dislocation density of the deformation region section was analyzed through XRD, and the change law of the dislocation density was revealed under the action of different process parameters. Therefore, the macro and micro effect mechanism of process parameters on geometric dimensions was verified, and then the control method of the geometric dimension was obtained in belt-heated incremental sheet forming.


  • Open Access

    Research on Magnetic Rollers for Recovering Non-Ferrous Metals from End-of-Life Vehicles Employing Machine Learning

    by Youdong Jia, Jianxiong Liu, Zhengfang Li

    Recovering copper foil and crushed aluminum from end-of-life vehicles (ELVs) is a significant issue in the recycling industry. As a key technology for sorting aluminum, copper, and other non-ferrous metals, eddy current separation (ECS) is efficient in isolating the non-ferrous metals according to their different electrical conductivity and density. However, further research is still needed in the separation of large-size copper foil and crushed aluminum from scrapped vehicles. In this study, support vector regression (SVR) and the sparrow search algorithm (SSA) are exploited for the first time to be used in optimizing the Halbach magnetic roller. Firstly, the numerical simulation results are based on the response surface methodology (RSM). Then, the accuracy of four kernel functions employing SVR is compared to select a kernel function. The sparrow search algorithm (SSA) is proposed to optimize the structural parameters of the Halbach magnetic roller, concentrating on the above-selected kernel function. Meanwhile, the parameters are confirmed. Numerical simulation results indicate that machine learning for magnetic roller optimization is feasible.


  • Open Access

    Multi-Objective Optimization of Dimensional Accuracy in Electric Hot Incremental Sheet Forming

    by Zhengfang Li, Songlin He, Zhiguo An, Zhengyuan Gao, Shihong Lu

    The forming defects of parts mainly include fracture, springback, thermal expansion, and rough surface during electric hot incremental forming, in which the springback and thermal expansion directly affects the dimensional accuracy of parts. In this paper, the combined optimization of process parameters and unsupported distances was proposed to control the dimensional accuracy of forming parts in the electric hot incremental sheet forming process. The predictive model of major errors was established through the response surface methodology, and then the multi-objective optimal model was obtained using Non-dominated Sorting Genetic Algorithms-II (NSGA-II). Meanwhile, a multi-objective optimal result was determined according to the error compensation feature of the forming process. On this basis, the effect of unsupported distances on dimensional errors was analyzed in detail, and a valid unsupported distance was proposed to further improve the forming accuracy of the whole forming region. Finally, the experimental result demonstrated that the combined optimal method proposed was accurate and feasible.