BPBrandon Pardi

Brandon Pardi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Brandon Pardi has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    OptiGAN for crystal arrays: physics-informed generative modeling of optical photon transport in PET detector arrays

    by Stephan Naunheim, Brandon Pardi, Guneet Mummaneni, Carlotta Trigila, Emilie Roncali

    Objective. Monte Carlo simulations of optical photon transport are computationally prohibitive for large-scale optical systems including detector arrays and positron emission tomography systems, restricting their practical use to single-crystal studies. This work presents an enhanced conditional generative adversarial network capable of replacing optical simulations at the crystal array level, extending our previous single-crystal approach to a 3 × 3 bismuth germanate detector array. Approach. We introduce Fourier feature encoding and a learnable latent mapping network as the modifications enabling stable training on the array geometry, together with a physics-informed loss term enforcing the unit-sphere state space S 2 of the generated propagation directions as a soft constraint. Training data requirements are reduced eight-fold by exploiting the array’s symmetry. The model is evaluated in three studies: a full array evaluation, a high-resolution study probing generalization, and a pencil beam irradiation study assessing practical applicability. Performance is benchmarked against GATE10/Geant4 ground truth, using the fluctuations between independent Monte Carlo runs. Main results. The enhanced optiGAN achieves similarity values within 3 σ -agreement of the Monte Carlo baseline across all evaluation conditions. An ablation and attribution analysis shows that the physics-informed loss term reduces low-structural similarity index measure bin fractions by a factor of 3.6 on the outer crystals, with a localized trade-off at the central crystal, yielding a net 48% reduction over the full array. The model transitions from electron-emission training data to realistic γ -photon interactions, producing flood maps that reproduce experimental patterns including photopeak clusters and inter-crystal scatter lines. Significance. This proof-of-concept demonstrates that a physics-informed generative model can simulate optical photon transport in segmented scintillator arrays at a training and inference cost accessible on a single workstation GPU. This provides a foundation for future models capable of generalizing across diverse array configurations.

  • Open Access

    Adenocarcinoma cell mechanobiology is altered by the loss modulus of the surrounding extracellular matrix

    by Warren Flores, Brandon Pardi, Isaac Sousa, Ummay Honey, Roberto Carlos Andresen Eguiluz

    Elastic and viscoelastic properties of extracellular matrices (ECM) are known to regulate cellular behavior and mechanosensation differently, with implications for morphogenesis, wound healing, and pathophysiology. Most in vitro cellular processes, including cell migration, are studied on linear-elastic substrates to mimic extracellular matrices. However, tissues are actually viscoelastic and display a loss modulus (G´´) that may be 10-20% of their storage modulus (G´). Recent research has shown that cells can distinguish between elastic and viscoelastic ECM, leading to alterations in their cellular morphology, migration rates, and contractility. Here, we present a protocol for creating PAH-based model ECMs that enables the fabrication of viscoelastic substrates with storage moduli similar to those of their elastic counterparts. To explore how G´´ influences epithelial cell mechanobiology, we fabricated tunable viscoelastic model ECMs with G´ of 3 kPa, 8 kPa, and 12 kPa, and for each, independently tuned G´´ values to approximately 300 Pa, 500 Pa, and 700 Pa, respectively. We found that A549 cells cultured on stiff elastic model ECMs migrated ~30% slower and formed larger focal adhesions compared to their viscoelastic counterparts. Conversely, A549 cells on intermediate viscoelastic model ECMs exhibited a ~54% reduction in migration speed, with no significant difference in focal adhesion size relative to their elastic counterparts. These findings highlight the complex interplay between substrate (ECM) elastic and viscoelastic properties in regulating epithelial cell mechanobiology and emphasize the importance of time-dependent matrix mechanics in governing epithelial responses.

  • Open Access

    Adenocarcinoma cell mechanobiology is altered by the loss modulus of the surrounding extracellular matrix

    by Ariell M. Smith, Brandon M. Pardi, Isaac Sousa, Arvind Gopinath, Roberto Carlos Andresen Eguiluz

    Elastic and viscoelastic properties of extracellular matrices (ECM) are known to regulate cellular behavior and mechanosensation differently, with implications for morphogenesis, wound healing, and pathophysiology. Most in vitro cellular processes, including cell migration, are studied on linear-elastic substrates to mimic extracellular matrices. However, most tissues are viscoelastic and display a loss modulus ( G ⍰⍰) that may be 10-20% of their storage modulus ( G ⍰) under biophysically relevant conditions. Recent research has shown that cells can distinguish between elastic and viscoelastic ECM, leading to alterations in their cellular morphology, migration rates, and contractility. Here, we present a protocol for creating PAH-based model ECMs that enables the fabrication of viscoelastic substrates with storage moduli similar to those of their elastic counterparts. To explore how G ⍰⍰ influences epithelial cell mechanobiology, we fabricated tunable viscoelastic model ECMs with G ⍰ of 3 kPa, 8 kPa, and 12 kPa, and for each, independently tuned G ⍰⍰ values to approximately 300 Pa, 500 Pa, and 700 Pa, respectively. We found that A549 cells cultured on stiff elastic model ECMs migrated ∼30% slower and formed larger focal adhesions compared to their viscoelastic counterparts. Conversely, A549 cells on intermediate viscoelastic model ECMs exhibited a ∼54% reduction in migration speed, with no significant difference in focal adhesion size relative to their elastic counterparts. These findings highlight the complex interplay between substrate (ECM) elastic and viscoelastic properties in regulating epithelial cell mechanobiology and emphasize the importance of time-dependent matrix mechanics in governing epithelial responses.

  • Open Access

    OptiGAN for Crystal Arrays: Physics-Informed Generative Modeling of Optical Photon Transport in PET Detector Arrays

    by Stephan Naunheim, Brandon Pardi, Guneet Mummaneni, Carlotta Trigila, Emilie Roncali

    Monte Carlo simulations of optical photon transport are computationally prohibitive for large-scale optical systems including detector arrays and PET systems, restricting practical use to single-crystal studies. This work presents an enhanced conditional generative adversarial network (optiGAN) replacing optical simulations at the crystal array level, extending our single-crystal approach to a 3x3 BGO array. We enhance the Wasserstein-GAN framework with Fourier feature encoding, a learnable latent mapping network, and a physics-informed loss enforcing momentum conservation. Training data is reduced eight-fold by exploiting symmetry. Evaluation employs three studies: a full array evaluation testing generalization from the fundamental domain to the complete geometry, a high-resolution study probing out-of-distribution generalization to untrained positions, and a pencil beam $γ$-photon study assessing practical applicability for experimental detector characterization. Performance is benchmarked against GATE10/Geant4 ground truth, using intrinsic fluctuations between independent Monte Carlo runs as baseline. OptiGAN achieves sliced Wasserstein similarity within 3$σ$-agreement of the baseline across all conditions, demonstrating successful generalization to the full array. The model transitions from electron-emission training data to realistic $γ$-photon interactions, producing flood maps that reproduce characteristic patterns including photopeak clusters and inter-crystal scatter lines. This proof-of-concept demonstrates that physics-informed generative models can accurately simulate optical photon transport in segmented scintillator arrays. The reproduction of experimentally relevant flood map features validates optiGAN for PET detector development and establishes a foundation for models generalizing across diverse array configurations.

  • Open Access

    pyQCM-BraTaDio: A tool for visualization, data mining, and modelling of Quartz crystal microbalance with dissipation data

    by Brandon Pardi, Syeda Tajin Ahmed, Silvia Jonguitud Flores, Warren Flores, Jean-Michel Friedt, Laura L. E. Mears, Bernardo Yáñez Soto, Roberto C. Andresen Eguiluz

    Here, we present a Python-based software that allows for the rapid visualization, data mining, and basic model applications of quartz crystal microbalance with dissipation data. Our implementation begins with a Tkinter GUI to prompt the user for all required information, such as file name/location, selection of baseline time, and overtones for visualization (with customization capabilities). These inputs are then fed to a workflow that will use the baseline time to scrub and temporally shift data using the Pandas (McKinney & others, 2010) and NumPy (Harris et al., 2020) libraries and carry out the plot options for visualization. The last stage consists of an interactive plot, that presents the data and allows the user to select ranges in MatPlotLib-generated panels (Hunter, 2007), followed by application of data models, including Sauerbrey, thin films in liquid, among others, that are carried out with NumPy and SciPy (Virtanen et al., 2020). The implementation of this software allows for simple and expedited data visualization and analysis, in lieu of time consuming and labor-intensive spreadsheet analysis.


  • Top Cited Papers
    Open Access

    Facile Determination of the Poisson’s Ratio and Young’s Modulus of Polyacrylamide Gels and Polydimethylsiloxane

    by Ariell Marie Smith, Dominique Gabriele Inocencio, Brandon Michael Pardi, Arvind Gopinath, Roberto Carlos Andresen Eguiluz

    Polyacrylamide hydrogels (PAH gel) and polydimethylsiloxane (PDMS, an elastomer) are two soft materials often used in cell mechanics and mechanobiology, in manufacturing lab-on-a-chip applications, among others. This is partly due to the ability to tune their elasticity with ease in addition to various chemical modifications. For affine polymeric networks, two (of three) elastic constants, Young's modulus (E), the shear modulus (G), and Poisson's ratio (ν), describe the purely elastic response to external forces. However, the literature addressing the experimental determination of ν for PAH (sometimes called PAA gels in the literature) and the PDMS elastomer is surprisingly limited when compared to the literature that reports values of the elastic moduli, E and G. Here, we present a facile method to obtain the Poisson's ratio and Young's modulus for PAH gel and PDMS elastomer based on static tensile tests. The value of ν obtained from the deformation of the sample is compared to the value determined by comparing E and G via a second independent method that utilizes small amplitude shear rheology. We show that the Poisson's ratio may vary significantly from the value for incompressible materials (ν = 0.5), often assumed in the literature even for soft compressible hydrogels. Surprisingly, we find a high degree of agreement between elastic constants obtained by shear rheology and macroscopic static tension test data for polyacrylamide hydrogels but not for elastomeric PDMS.


  • Open Access

    pyQCM-BraTaDio: A tool for visualization, data mining, and modelling of Quartz crystal microbalance with dissipation data

    by Brandon M. Pardi, Syeda Tajin Ahmed, Silvia Jonguitud Flores, Warren Flores, Laura L.E. Mears, Bernardo Yáñez Soto, Roberto Carlos Andresen Eguiluz

    Here, we present a Python based software that allows for the rapid visualization, data mining, and basic model applications of quartz crystal microbalance with dissipation data. Our implementation begins with a Tkinter GUI to prompt the user for all required information, such as file name/location, selection of baseline time, and overtones for visualization (with customization capabilities). These inputs are then fed to a workflow that will use the baseline time to scrub and temporally shift data using the Pandas and Numpy libraries and carry out the plot options for visualization. The last stage consists of an interactive plot, that presents the data and allows the user to select ranges in MatPlotLib-generated panels, followed by application of data models, including Sauerbrey, thin films in liquid, among others, that are carried out with NumPy and SciPy. The implementation of this software allows for simple and expedited data analysis, in lieu of time consuming and labor-intensive spreadsheet analysis. Metadata:


  • Open Access

    Facile determination of the Poisson’s ratio and Young’s modulus of polyacrylamide gels and polydimethylsiloxane

    by Ariell M. Smith, Dominique Gabriele Inocencio, Brandon M. Pardi, Arvind Gopinath, Roberto Andresen Eguiluz

    Polyacrylamide hydrogels (PAH) and polydimethylsiloxane (PDMS) are two soft materials often used in cell mechanics and mechanobiology, in manufacturing lab-on-a chip applications, among others. This is partly due to the ability to tune their elasticity with ease, in addition to various chemical modifications. For affine polymeric networks, two (of three) elastic constants – the Young’s modulus ( E ), the shear modulus ( G ), and the Poisson’s ratio ( ν ) – describe the purely elastic response to external forces. However, the literature addressing the experimental determination of ν for PAH (also sometimes referred to as PAA gels in the literature) and PDMS is surprisingly limited when compared to the literature reporting values of E and G . Here, we present a facile method to obtain the Poison’s ratio and Young’s modulus for PAH and PDMS based on static tensile tests, and cross-correlate these values with those obtained via a second independent method, shear rheology. We show that: i) the Poisson’s ratio may vary significantly from the value for incompressible materials (ν = 0.5), and ii) find a high degree of agreement between shear rheology and macroscopic static tension tests for PAH but not PDMS. Abstract Figure: