Elijah W. Wilson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Elijah W. Wilson has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- James Daniel Moody
Department of Chemistry and Biochemistry, Brigham Young University, 701 East University Parkway, Provo, UT 84602, USA
5 shared publications - Maria Jose Pedroza Romo
Department of Chemistry and Biochemistry, Brigham Young University, 701 East University Parkway, Provo, UT 84602, USA
5 shared publications - Supeshala Nawarathnage
Department of Chemistry and Biochemistry, Brigham Young University, 701 East University Parkway, Provo, UT 84602, USA
5 shared publications - Tzanko Doukov
Macromolecular Crystallography Group, Structural Molecular Biology Resource, Stanford Synchrotron Radiation Lightsource, Menlo Park, CA 94025, USA
5 shared publications - Jacob C. Averett
Department of Chemistry and Biochemistry, Brigham Young University, 701 East University Parkway, Provo, UT 84602, USA
4 shared publications Alihikaua Keliiliki
Department of Chemistry and Biochemistry, Brigham Young University, 701 East University Parkway, Provo, UT 84602, USA
3 shared publications
Latest Publications
- Open Access
- 11 July 2026
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section D Structural Biology
- Vol. 82 (8) , 1009
Optimal 1TEL–target protein linker character is target protein-dependent. Corrigendum
The name of one of the authors in the article by Pedroza Romo et al. [(2026), Acta Cryst. D 82 , 516–532] is corrected.
- 11 July 2026
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section D Structural Biology
- Vol. 82 (8) , 1009
Open AccessOptimal 1TEL–target protein linker character is target protein-dependent. Corrigendum
The name of one of the authors in the article by Pedroza Romo et al. [(2026), Acta Cryst. D 82 , 516–532] is corrected.
- Open Access
- 7 April 2026
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section D Structural Biology
- Vol. 82 (5) , 516-532
Optimal 1TEL–target protein linker character is target protein-dependent
Fusing a variant of the sterile alpha motif domain of the human translocation ETS leukaemia protein (1TEL) to a protein of interest has been shown to significantly enhance its crystallization propensity. 1TEL is a pH-dependent, polymer-forming protein crystallization chaperone which, when covalently fused to a protein of interest, forms a stable, well ordered crystal lattice. However, despite its success, a challenge persists in that crystal quality and diffraction limits appear to be heavily dependent on the choice of linker between 1TEL and the protein of interest, with the identification of a functional linker currently relying on trial-and-error methods. Likewise, previous studies revealed that a ten-histidine tag at the 1TEL N-terminus can either facilitate or hinder the ordered crystallization of target proteins attached via flexible or semi-flexible linkers. To address these challenges, we designed multiple constructs with several types of linkers [rigid (helical fusion), semi-flexible (Pro-Ala and Pro-Ala-Ala) and flexible (Gly-Gly and Gly-Gly-Gly)] of varying lengths to fuse either a designed ankyrin-repeat protein (DARPin) or the thirty-eight-negative kinase-1 ubiquitin-associated (UBA) domain to the 1TEL C-terminus. Semi-flexible and flexible linker constructs were made with and without a ten-histidine tag. Our findings indicate that short semi-flexible and rigid linkers consistently yielded large crystals with a DARPin target protein, but that flexible linkers performed best with a UBA-domain target protein. Removing the ten-histidine tag uniformly enhanced crystallization rates, improved the crystal morphology and increased the crystallization propensity of the semi-flexible and flexible linker constructs. These results suggest that the ideal linker selection primarily depends on the properties of the target protein. Our data support our current recommendation to use a short flexible or semi-flexible linker between 1TEL and the target protein to facilitate protein crystallization and high-resolution structure determination.
- 7 April 2026
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section D Structural Biology
- Vol. 82 (5) , 516-532
Open AccessOptimal 1TEL–target protein linker character is target protein-dependent
Fusing a variant of the sterile alpha motif domain of the human translocation ETS leukaemia protein (1TEL) to a protein of interest has been shown to significantly enhance its crystallization propensity. 1TEL is a pH-dependent, polymer-forming protein crystallization chaperone which, when covalently fused to a protein of interest, forms a stable, well ordered crystal lattice. However, despite its success, a challenge persists in that crystal quality and diffraction limits appear to be heavily dependent on the choice of linker between 1TEL and the protein of interest, with the identification of a functional linker currently relying on trial-and-error methods. Likewise, previous studies revealed that a ten-histidine tag at the 1TEL N-terminus can either facilitate or hinder the ordered crystallization of target proteins attached via flexible or semi-flexible linkers. To address these challenges, we designed multiple constructs with several types of linkers [rigid (helical fusion), semi-flexible (Pro-Ala and Pro-Ala-Ala) and flexible (Gly-Gly and Gly-Gly-Gly)] of varying lengths to fuse either a designed ankyrin-repeat protein (DARPin) or the thirty-eight-negative kinase-1 ubiquitin-associated (UBA) domain to the 1TEL C-terminus. Semi-flexible and flexible linker constructs were made with and without a ten-histidine tag. Our findings indicate that short semi-flexible and rigid linkers consistently yielded large crystals with a DARPin target protein, but that flexible linkers performed best with a UBA-domain target protein. Removing the ten-histidine tag uniformly enhanced crystallization rates, improved the crystal morphology and increased the crystallization propensity of the semi-flexible and flexible linker constructs. These results suggest that the ideal linker selection primarily depends on the properties of the target protein. Our data support our current recommendation to use a short flexible or semi-flexible linker between 1TEL and the target protein to facilitate protein crystallization and high-resolution structure determination.
- Open Access
Optimal TELSAM-Target Protein Linker Character is Target Protein-Dependent
Fusing a variant of the sterile alpha motif domain of the human translocation ETS leukaemia protein (TELSAM) to a protein of interest has been shown to significantly enhance crystallization propensity. TELSAM is a pH-dependent, polymer-forming protein crystallization chaperone which, when covalently fused to a protein of interest, forms a stable, well-ordered crystal lattice. However, despite its success, a challenge persists in that crystal quality and diffraction limits appear to be heavily dependent on the choice of linker between TELSAM and the protein of interest, with identification of a functional linker relying on trial-and-error methods. Likewise, previous studies revealed that the 10xHis tag at the TELSAM N-terminus can either facilitate or hinder the ordered crystallization of target proteins attached via flexible or semi-flexible linkers. To address these challenges, we designed multiple constructs with several types of linkers—rigid (helical fusion), semi-flexible (Pro-Ala n ), and flexible (poly-Gly)—of varying lengths to fuse a designed ankyrin repeat protein (DARPin) to the TELSAM C-terminus. Semi-flexible and flexible linker constructs were made with and without the 10xHis tag. Our findings indicate that short semi-flexible and rigid linkers consistently yield large crystals within 24 hours with a DARPin target protein, but that flexible linkers perform best with a TNK1 UBA domain target protein. Removing the 10xHis tag enhanced crystallization rates, improved crystal morphology, and increased the crystallization propensity of semi-flexible and flexible linker constructs. While removing the His tag did not have a significant effect on crystal size, it improved the diffraction limits and crystal quality of the 1TEL-PA-DARPin construct. These results suggest that the ideal linker selection primarily depends on the properties of the target protein. Our data support the recommendation to use a short yet flexible or semi-flexible linker between TELSAM and the target protein to facilitate protein crystallization and high-resolution structure determination. Synopsis: In this study, we examine the effect of short to medium-length flexible, semi-flexible, and rigid linkers on the crystallization of a DARPin fused to the 1TEL protein crystallization chaperone, demonstrating that while rigid linkers impair crystallization and reduce diffraction quality, the ideal linker character remain target-protein dependent.
Open AccessOptimal TELSAM-Target Protein Linker Character is Target Protein-Dependent
Fusing a variant of the sterile alpha motif domain of the human translocation ETS leukaemia protein (TELSAM) to a protein of interest has been shown to significantly enhance crystallization propensity. TELSAM is a pH-dependent, polymer-forming protein crystallization chaperone which, when covalently fused to a protein of interest, forms a stable, well-ordered crystal lattice. However, despite its success, a challenge persists in that crystal quality and diffraction limits appear to be heavily dependent on the choice of linker between TELSAM and the protein of interest, with identification of a functional linker relying on trial-and-error methods. Likewise, previous studies revealed that the 10xHis tag at the TELSAM N-terminus can either facilitate or hinder the ordered crystallization of target proteins attached via flexible or semi-flexible linkers. To address these challenges, we designed multiple constructs with several types of linkers—rigid (helical fusion), semi-flexible (Pro-Ala n ), and flexible (poly-Gly)—of varying lengths to fuse a designed ankyrin repeat protein (DARPin) to the TELSAM C-terminus. Semi-flexible and flexible linker constructs were made with and without the 10xHis tag. Our findings indicate that short semi-flexible and rigid linkers consistently yield large crystals within 24 hours with a DARPin target protein, but that flexible linkers perform best with a TNK1 UBA domain target protein. Removing the 10xHis tag enhanced crystallization rates, improved crystal morphology, and increased the crystallization propensity of semi-flexible and flexible linker constructs. While removing the His tag did not have a significant effect on crystal size, it improved the diffraction limits and crystal quality of the 1TEL-PA-DARPin construct. These results suggest that the ideal linker selection primarily depends on the properties of the target protein. Our data support the recommendation to use a short yet flexible or semi-flexible linker between TELSAM and the target protein to facilitate protein crystallization and high-resolution structure determination. Synopsis: In this study, we examine the effect of short to medium-length flexible, semi-flexible, and rigid linkers on the crystallization of a DARPin fused to the 1TEL protein crystallization chaperone, demonstrating that while rigid linkers impair crystallization and reduce diffraction quality, the ideal linker character remain target-protein dependent.
- Open Access
- 25 September 2023
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section D Structural Biology
- Vol. 79 (10) , 925-943
Increasing the bulk of the 1TEL–target linker and retaining the 10×His tag in a 1TEL–CMG2-vWa construct improves crystal order and diffraction limits
TELSAM-fusion crystallization has the potential to become a revolutionary tool for the facile crystallization of proteins. TELSAM fusion can increase the crystallization rate and enable crystallization at low protein concentrations, in some cases with minimal crystal contacts [Nawarathnage et al. (2022), Open Biol. 12, 210271]. Here, requirements for the linker composition between 1TEL and a fused CMG2 vWa domain were investigated. Ala-Ala, Ala-Val, Thr-Val and Thr-Thr linkers were evaluated, comparing metrics for crystallization propensity and crystal order. The effect on crystallization of removing or retaining the purification tag was then tested. It was discovered that increasing the linker bulk and retaining the 10×His purification tag improved the diffraction resolution, likely by decreasing the number of possible vWa-domain orientations in the crystal. Additionally, it was discovered that some vWa-domain binding modes are correlated with scrambling of the 1TEL polymer orientation in crystals and an effective mitigation strategy for this pathology is presented.
- 25 September 2023
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section D Structural Biology
- Vol. 79 (10) , 925-943
Open AccessIncreasing the bulk of the 1TEL–target linker and retaining the 10×His tag in a 1TEL–CMG2-vWa construct improves crystal order and diffraction limits
TELSAM-fusion crystallization has the potential to become a revolutionary tool for the facile crystallization of proteins. TELSAM fusion can increase the crystallization rate and enable crystallization at low protein concentrations, in some cases with minimal crystal contacts [Nawarathnage et al. (2022), Open Biol. 12, 210271]. Here, requirements for the linker composition between 1TEL and a fused CMG2 vWa domain were investigated. Ala-Ala, Ala-Val, Thr-Val and Thr-Thr linkers were evaluated, comparing metrics for crystallization propensity and crystal order. The effect on crystallization of removing or retaining the purification tag was then tested. It was discovered that increasing the linker bulk and retaining the 10×His purification tag improved the diffraction resolution, likely by decreasing the number of possible vWa-domain orientations in the crystal. Additionally, it was discovered that some vWa-domain binding modes are correlated with scrambling of the 1TEL polymer orientation in crystals and an effective mitigation strategy for this pathology is presented.
- Open Access
Decreasing the flexibility of the TELSAM-target protein linker and omitting the cleavable fusion tag improves crystal order and diffraction limits
TELSAM crystallization promises to become a revolutionary tool for the facile crystallization of proteins. TELSAM can increase the rate of crystallization and form crystals at low protein concentrations without direct contact between TELSAM polymers and, in some cases, with very minimal crystal contacts overall (Nawarathnage et al ., 2022). To further understand and characterize TELSAM-mediated crystallization, we sought to understand the requirements for the composition of the linker between TELSAM and the fused target protein. We evaluated four different linkers Ala-Ala, Ala-Val, Thr-Val, and Thr-Thr, between 1TEL and the human CMG2 vWa domain. We compared the number of successful crystallization conditions, the number of crystals, the average and best diffraction resolution, and the refinement parameters for the above constructs. We also tested the effect of the fusion protein SUMO on crystallization. We discovered that rigidification of the linker improved diffraction resolution, likely by decreasing the number of possible orientations of the vWa domains in the crystal, and that omitting the SUMO domain from the construct also improved the diffraction resolution. Synopsis: We demonstrate that the TELSAM protein crystallization chaperone can enable facile protein crystallization and high-resolution structure determination. We provide evidence to support the use of short but flexible linkers between TELSAM and the protein of interest and to support the avoidance of cleavable purification tags in TELSAM-fusion constructs.
Open AccessDecreasing the flexibility of the TELSAM-target protein linker and omitting the cleavable fusion tag improves crystal order and diffraction limits
TELSAM crystallization promises to become a revolutionary tool for the facile crystallization of proteins. TELSAM can increase the rate of crystallization and form crystals at low protein concentrations without direct contact between TELSAM polymers and, in some cases, with very minimal crystal contacts overall (Nawarathnage et al ., 2022). To further understand and characterize TELSAM-mediated crystallization, we sought to understand the requirements for the composition of the linker between TELSAM and the fused target protein. We evaluated four different linkers Ala-Ala, Ala-Val, Thr-Val, and Thr-Thr, between 1TEL and the human CMG2 vWa domain. We compared the number of successful crystallization conditions, the number of crystals, the average and best diffraction resolution, and the refinement parameters for the above constructs. We also tested the effect of the fusion protein SUMO on crystallization. We discovered that rigidification of the linker improved diffraction resolution, likely by decreasing the number of possible orientations of the vWa domains in the crystal, and that omitting the SUMO domain from the construct also improved the diffraction resolution. Synopsis: We demonstrate that the TELSAM protein crystallization chaperone can enable facile protein crystallization and high-resolution structure determination. We provide evidence to support the use of short but flexible linkers between TELSAM and the protein of interest and to support the avoidance of cleavable purification tags in TELSAM-fusion constructs.