Yunhao Xiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yunhao Xiao has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Qipeng Zhang
Department of Mechanical Engineering, Virginia Tech, Blacksburg, 635 Prices Fork Road, Blacksburg, Virginia 24061, United States
2 shared publications - Zheng Li
Department of Mechanical Engineering, Virginia Tech, Blacksburg, USA
2 shared publications - Alexander Urban
Department of Chemical Engineering, Columbia University, New York, USA
1 shared publication Hao Li
Department of Mechanical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061, United States
1 shared publicationJiali Li
Department of Mechanical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061, United States
1 shared publication- Joaquín Rodríguez-López
Department of Chemistry, University of Illinois Urbana-Champaign, Urbana, IL 61801, USA
1 shared publication
Latest Publications
- RetractedOpen Access
- 1 April 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (4) , 040525
RETRACTED: Direct Upcycling Spent LiFePO4 Cathode Material by Pre-Oxidation and Al-V Co-Doping Strategy
The growing volume of spent lithium iron phosphate (LFP) batteries underscores the need for efficient recycling to mitigate environmental concerns and recover valuable materials. This study presents an upcycling strategy integrating pre-oxidation treatment and Al-V co-doping to produce regenerated LFP (RLFP) from spent LFP (SLFP). The pre-oxidation process effectively removes residual binders, carbon, and electrolytes, while Al-V co-doping shortens the Li+ migration path, reduces charge-transfer resistance, and enhances the electrochemical performance of RLFP. Notably, one of the RLFPs prepared by co-doping achieves an outstanding discharge capacity of 146.7 mAh g−1 at 1 C, and exceptional cycling stability, retaining 95.4% capacity after 200 cycles at 1 C, which amounts to a 21.5% improvement in capacity retention compared to undoped RLFP. This work thus provides a scalable recycling pathway by offering new insights into impurity control in processing SLFP and highlighting the potential of co-doping to enhance SLFP upcycling.
- 1 April 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (4) , 040525
RetractedOpen AccessRETRACTED: Direct Upcycling Spent LiFePO4 Cathode Material by Pre-Oxidation and Al-V Co-Doping Strategy
The growing volume of spent lithium iron phosphate (LFP) batteries underscores the need for efficient recycling to mitigate environmental concerns and recover valuable materials. This study presents an upcycling strategy integrating pre-oxidation treatment and Al-V co-doping to produce regenerated LFP (RLFP) from spent LFP (SLFP). The pre-oxidation process effectively removes residual binders, carbon, and electrolytes, while Al-V co-doping shortens the Li+ migration path, reduces charge-transfer resistance, and enhances the electrochemical performance of RLFP. Notably, one of the RLFPs prepared by co-doping achieves an outstanding discharge capacity of 146.7 mAh g−1 at 1 C, and exceptional cycling stability, retaining 95.4% capacity after 200 cycles at 1 C, which amounts to a 21.5% improvement in capacity retention compared to undoped RLFP. This work thus provides a scalable recycling pathway by offering new insights into impurity control in processing SLFP and highlighting the potential of co-doping to enhance SLFP upcycling.
- Open Access
- 6 January 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (1) , 1293-1302
Doping LiFePO4 with Al3+: Suppression of Anti-Site Defects and Implications for Battery Recycling
In this study, a group of aluminum-doped lithium iron phosphate (LFP) with varying dopant concentrations (Li1-3x Al x FePO4/C, where x = 0.01-0.03) was synthesized via a solid-state reaction. Comprehensive analysis revealed that the aluminum dopant was uniformly distributed across the crystals of the synthesized samples. Notably, minor doping (x ≤ 0.01) helped reduce the formation of antisite defects within the LFP structure, lowering the defect content to 1.67% compared to 2.04% in undoped LFP. Further examination corroborated the presence of antisite defects and confirmed their reduced concentration in aluminum-doped LFP. Electrochemically, LAFP01 with x = 0.01 (or 1% aluminum doping) demonstrated an increased lithium-ion diffusion coefficient and superior electrochemical performance, achieving a discharge capacity of 155.6 mA h/g at a 0.1 C rate and surpassing that of undoped LFP. The performance improvement was more evident under rapid charge and discharge conditions, where LAFP01 maintained a higher specific capacity (86 mA h/g compared to 78 mA h/g for undoped LFP) at a current density of 5 C or greater. This study suggests that the reduced antisite defects with small aluminum doping could potentially contribute to the improved electrochemical characteristics of LFP cathodes, offering insights into enhancing lithium-ion battery performance and managing aluminum impurities in battery recycling processes.
- 6 January 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (1) , 1293-1302
Open AccessDoping LiFePO4 with Al3+: Suppression of Anti-Site Defects and Implications for Battery Recycling
In this study, a group of aluminum-doped lithium iron phosphate (LFP) with varying dopant concentrations (Li1-3x Al x FePO4/C, where x = 0.01-0.03) was synthesized via a solid-state reaction. Comprehensive analysis revealed that the aluminum dopant was uniformly distributed across the crystals of the synthesized samples. Notably, minor doping (x ≤ 0.01) helped reduce the formation of antisite defects within the LFP structure, lowering the defect content to 1.67% compared to 2.04% in undoped LFP. Further examination corroborated the presence of antisite defects and confirmed their reduced concentration in aluminum-doped LFP. Electrochemically, LAFP01 with x = 0.01 (or 1% aluminum doping) demonstrated an increased lithium-ion diffusion coefficient and superior electrochemical performance, achieving a discharge capacity of 155.6 mA h/g at a 0.1 C rate and surpassing that of undoped LFP. The performance improvement was more evident under rapid charge and discharge conditions, where LAFP01 maintained a higher specific capacity (86 mA h/g compared to 78 mA h/g for undoped LFP) at a current density of 5 C or greater. This study suggests that the reduced antisite defects with small aluminum doping could potentially contribute to the improved electrochemical characteristics of LFP cathodes, offering insights into enhancing lithium-ion battery performance and managing aluminum impurities in battery recycling processes.
- Open Access
- 21 August 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (35) , 10711-10717
Inhibiting Shuttle Effect and Dendrite Growth in Sodium–Sulfur Batteries Enabled by Applying External Acoustic Field
The room-temperature sodium-sulfur (RT Na-S) battery is a promising alternative to traditional lithium-ion batteries owing to its abundant material availability and high specific energy density. However, the sodium polysulfide shuttle effect and dendritic growth pose significant challenges to their practical applications. In this study, we apply diverse disciplinary backgrounds to introduce a novel method to stimulate polarized BaTiO3 (BTO) nanoparticles on the separator. This approach generates more charges due to the piezoelectric effect under stronger driving forces produced by applying a controllable acoustic field at the outer edge of the cell. The acoustically stimulated BTO attracts more polysulfides, thus reducing the shuttling effect from the cathode to the anode and ultimately enhancing the battery performance. Meanwhile, the acoustic waves create additional streaming flows, improving the uniformity of the sodium ion dispersion, enhancing the sodium ion transport and reducing the possibility of sodium dendrite development. We believe that this work offers a new strategy for the development of high-performance Na-S batteries.
- 21 August 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (35) , 10711-10717
Open AccessInhibiting Shuttle Effect and Dendrite Growth in Sodium–Sulfur Batteries Enabled by Applying External Acoustic Field
The room-temperature sodium-sulfur (RT Na-S) battery is a promising alternative to traditional lithium-ion batteries owing to its abundant material availability and high specific energy density. However, the sodium polysulfide shuttle effect and dendritic growth pose significant challenges to their practical applications. In this study, we apply diverse disciplinary backgrounds to introduce a novel method to stimulate polarized BaTiO3 (BTO) nanoparticles on the separator. This approach generates more charges due to the piezoelectric effect under stronger driving forces produced by applying a controllable acoustic field at the outer edge of the cell. The acoustically stimulated BTO attracts more polysulfides, thus reducing the shuttling effect from the cathode to the anode and ultimately enhancing the battery performance. Meanwhile, the acoustic waves create additional streaming flows, improving the uniformity of the sodium ion dispersion, enhancing the sodium ion transport and reducing the possibility of sodium dendrite development. We believe that this work offers a new strategy for the development of high-performance Na-S batteries.
- Open Access
- 1 May 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (5) , 050538
Integrated Combinatorial Synthesis, Characterization, and Test Platform for Lithium-Ion Battery Cathode Materials
An integrated combinatorial synthesis, characterization, and testing methodology and platform is proposed and developed for high-throughput exploration of Li-ion rechargeable battery cathode chemistries. This article describes the design of the platform’s combinatorial synthesis part and its prototype performance. A key design element is a multi-gear powertrain with a unique milling-force adjustable pestle that ensures high compatibility with varying types of electrode materials. To demonstrate the prototype, LiNiO2 was prepared via a solid-state route under various operating conditions. We evaluated the effects of processing parameters, including milling force and mixing speed, on the synthesized electrode’s physical properties and electrochemical behavior. The synthesized LiNiO2 materials show excellent electrochemical performance comparable to manually synthesized LiNiO2.
- 1 May 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (5) , 050538
Open AccessIntegrated Combinatorial Synthesis, Characterization, and Test Platform for Lithium-Ion Battery Cathode Materials
An integrated combinatorial synthesis, characterization, and testing methodology and platform is proposed and developed for high-throughput exploration of Li-ion rechargeable battery cathode chemistries. This article describes the design of the platform’s combinatorial synthesis part and its prototype performance. A key design element is a multi-gear powertrain with a unique milling-force adjustable pestle that ensures high compatibility with varying types of electrode materials. To demonstrate the prototype, LiNiO2 was prepared via a solid-state route under various operating conditions. We evaluated the effects of processing parameters, including milling force and mixing speed, on the synthesized electrode’s physical properties and electrochemical behavior. The synthesized LiNiO2 materials show excellent electrochemical performance comparable to manually synthesized LiNiO2.