Xing Han
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xing Han has a total of 135 co-authors. Here are the top co-authors by number of shared publications:
- Yong Cui
Shanghai Jiao Tong University
31 shared publications - Yan Liu
Shanghai Jiao Tong University
27 shared publications - Xiaowei Wu
State Key Laboratory of Structural Chemistry, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou 350002, China
8 shared publications - Chen Yuan
Analytical & Testing Center
7 shared publications Bang Hou
School of Chemistry and Chemical Engineering, Frontiers Science Center for Transformative Molecules and State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
4 shared publications- Bang Hou
State Key Laboratory of Synergistic Chem-Bio Synthesis, School of Chemistry and Chemical Engineering
4 shared publications
Latest Publications
- 15 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (42) , 45775-45787
Functionalized Olefin-Linked Covalent Organic Frameworks for Selective Mercury Capture and Recovery from Vinyl Chloride-Rich Gas Streams
The calcium carbide-derived acetylene hydrochlorination route for vinyl chloride monomer (VCM, C2H3Cl) production remains a major source of mercury consumption and emission owing to its reliance on HgCl2/activated carbon catalysts. Selective removal of elemental mercury (Hg0) from crude VCM streams is intrinsically challenging because Hg0 must be captured from C2H3Cl-rich and HCl-containing atmospheres without coadsorbing valuable C2H3Cl. Here, we report a pore-engineered covalent organic framework (COF) platform in which olefin-linked sp2-carbon-conjugated frameworks suppress nonspecific C2H3Cl adsorption, while Cu-coordinated 2-(methylthio)ethoxy side chains create well-defined Cu–O2S2 pockets for selective Hg0 capture. These structural features afford an ideal adsorbed solution theory-predicted Hg0/C2H3Cl selectivity exceeding 20,000. Notably, dynamic breakthrough experiments under simulated industrial conditions containing 5 vol % HCl further revealed a Hg0 breakthrough time of over 10,000 min g–1 in C2H3Cl-rich streams, with a separation factor of approximately 52, demonstrating exceptional resistance to acid-induced deactivation. Treatment of the spent adsorbent with Na2S solution enables regeneration over 30 consecutive cycles and converts captured mercury into chemically stable HgS. This work establishes a molecularly precise removal–recovery platform for elemental mercury from chemically complex industrial gas streams, highlighting the power of programmed pore microenvironments to discriminate trace toxic species from abundant value-added molecules under chemically aggressive conditions.
- 15 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (42) , 45775-45787
Functionalized Olefin-Linked Covalent Organic Frameworks for Selective Mercury Capture and Recovery from Vinyl Chloride-Rich Gas Streams
The calcium carbide-derived acetylene hydrochlorination route for vinyl chloride monomer (VCM, C2H3Cl) production remains a major source of mercury consumption and emission owing to its reliance on HgCl2/activated carbon catalysts. Selective removal of elemental mercury (Hg0) from crude VCM streams is intrinsically challenging because Hg0 must be captured from C2H3Cl-rich and HCl-containing atmospheres without coadsorbing valuable C2H3Cl. Here, we report a pore-engineered covalent organic framework (COF) platform in which olefin-linked sp2-carbon-conjugated frameworks suppress nonspecific C2H3Cl adsorption, while Cu-coordinated 2-(methylthio)ethoxy side chains create well-defined Cu–O2S2 pockets for selective Hg0 capture. These structural features afford an ideal adsorbed solution theory-predicted Hg0/C2H3Cl selectivity exceeding 20,000. Notably, dynamic breakthrough experiments under simulated industrial conditions containing 5 vol % HCl further revealed a Hg0 breakthrough time of over 10,000 min g–1 in C2H3Cl-rich streams, with a separation factor of approximately 52, demonstrating exceptional resistance to acid-induced deactivation. Treatment of the spent adsorbent with Na2S solution enables regeneration over 30 consecutive cycles and converts captured mercury into chemically stable HgS. This work establishes a molecularly precise removal–recovery platform for elemental mercury from chemically complex industrial gas streams, highlighting the power of programmed pore microenvironments to discriminate trace toxic species from abundant value-added molecules under chemically aggressive conditions.
- Top Cited Papers
- 8 January 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (2) , 2551-2562
Topology-Controlled Chirality and Spin Selectivity in Two-Dimensional Covalent Organic Frameworks
Controlling electron spin is fundamental to spintronics, where the chirality-induced spin selectivity (CISS) effect enables magnet-free spin-polarized transport. However, achieving robust and tunable spin polarization in solid-state materials remains a critical challenge. Here, we show that topological isomerism offers a direct strategy to modulate chirality and spin selectivity in two-dimensional (2D) covalent organic frameworks (COFs). Two Zn(salen)-based chiral COFs, TPE-KGM and TPE-SQL, were synthesized from identical precursors yet crystallized into distinct kgm and sql networks. Although compositionally identical, the kgm COF exhibits only weak local geometrical chirality, whereas the sql develops long-range structural chirality that markedly enhances spin selectivity. Circular dichroism (CD) and circularly polarized luminescence (CPL) reveal stronger chiral amplification in the sql topology, while magnetic conductive atomic force microscopy (mc-AFM) confirms enhanced spin polarization of 83% for TPE-SQL versus 53% for TPE-KGM, in sharp contrast to inorganic kgm crystals, where spin frustration and electronic chirality in kgm lattices typically yield higher spin polarization. Furthermore, both frameworks can be exfoliated into nanosheets and integrated with monolayer WSe2 to form van der Waals heterostructures, achieving spin injection with degrees of circular polarization of 8.1% (TPE-SQL) and 3.9% (TPE-KGM) at 78 K. These findings establish topology as a powerful design principle for governing chirality and spin selectivity in crystalline polymers, advancing the development of chiral optoelectronic and valleytronic materials.
- 8 January 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (2) , 2551-2562
Top Cited PapersTopology-Controlled Chirality and Spin Selectivity in Two-Dimensional Covalent Organic Frameworks
Controlling electron spin is fundamental to spintronics, where the chirality-induced spin selectivity (CISS) effect enables magnet-free spin-polarized transport. However, achieving robust and tunable spin polarization in solid-state materials remains a critical challenge. Here, we show that topological isomerism offers a direct strategy to modulate chirality and spin selectivity in two-dimensional (2D) covalent organic frameworks (COFs). Two Zn(salen)-based chiral COFs, TPE-KGM and TPE-SQL, were synthesized from identical precursors yet crystallized into distinct kgm and sql networks. Although compositionally identical, the kgm COF exhibits only weak local geometrical chirality, whereas the sql develops long-range structural chirality that markedly enhances spin selectivity. Circular dichroism (CD) and circularly polarized luminescence (CPL) reveal stronger chiral amplification in the sql topology, while magnetic conductive atomic force microscopy (mc-AFM) confirms enhanced spin polarization of 83% for TPE-SQL versus 53% for TPE-KGM, in sharp contrast to inorganic kgm crystals, where spin frustration and electronic chirality in kgm lattices typically yield higher spin polarization. Furthermore, both frameworks can be exfoliated into nanosheets and integrated with monolayer WSe2 to form van der Waals heterostructures, achieving spin injection with degrees of circular polarization of 8.1% (TPE-SQL) and 3.9% (TPE-KGM) at 78 K. These findings establish topology as a powerful design principle for governing chirality and spin selectivity in crystalline polymers, advancing the development of chiral optoelectronic and valleytronic materials.
- 13 November 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (46) , 25103-25112
Speciation Detection Deciphering C 2 H 2 /Cl-Driven Mercury Escape Mechanisms in PVC Production
Mercury emissions from acetylene hydrochlorination processes in polyvinyl chloride (PVC) production pose severe environmental risks yet remain poorly quantified due to methodological limitations in high-reactivity C2H2/HCl atmospheres. We reported an advanced operando mercury speciation platform named PVC-OHM, engineered through systematic optimization of the Ontario Hydro method (OHM), achieving simultaneous real-time detection of elemental mercury (Hg0) and divalent mercury (Hg2+) with unprecedented sensitivity (0.12 μg/m3) under industrially relevant conditions. Our mechanistic investigation reveals three dominant mercury escape pathways: (1) thermal desorption, wherein localized hotspots accelerate HgCl2 decomposition and elevate the saturated vapor pressure at carbon-mercury interface (from 0.9 to 20.3 atm), contributed to 80% of total Hg loss; (2) C2H2 driven reductive decomposition of HgCl2 catalyst at carbon-mercury interfaces, responsible for 65-78% of Hg0 emissions and (3) excess chlorine adsorption-induced desorption ([HgCl2/AC] Cl5, Eads > 0) accounting for >10% of Hg2+ emissions. Quantitative tracking demonstrates alarming mercury loss of per gram catalyst (5 wt % Hg) reached as 3.08 mg Hg0 and 9.01 mg Hg2+, directly linked to localized thermal gradients (ΔT = 250-300 °C) at reaction hotspots. This work establishes the first experimentally validated framework for mercury fate prediction in carbide-based PVC synthesis, providing actionable strategies for emission control through hotspot mitigation and coordination environment optimization.
- 13 November 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (46) , 25103-25112
Speciation Detection Deciphering C 2 H 2 /Cl-Driven Mercury Escape Mechanisms in PVC Production
Mercury emissions from acetylene hydrochlorination processes in polyvinyl chloride (PVC) production pose severe environmental risks yet remain poorly quantified due to methodological limitations in high-reactivity C2H2/HCl atmospheres. We reported an advanced operando mercury speciation platform named PVC-OHM, engineered through systematic optimization of the Ontario Hydro method (OHM), achieving simultaneous real-time detection of elemental mercury (Hg0) and divalent mercury (Hg2+) with unprecedented sensitivity (0.12 μg/m3) under industrially relevant conditions. Our mechanistic investigation reveals three dominant mercury escape pathways: (1) thermal desorption, wherein localized hotspots accelerate HgCl2 decomposition and elevate the saturated vapor pressure at carbon-mercury interface (from 0.9 to 20.3 atm), contributed to 80% of total Hg loss; (2) C2H2 driven reductive decomposition of HgCl2 catalyst at carbon-mercury interfaces, responsible for 65-78% of Hg0 emissions and (3) excess chlorine adsorption-induced desorption ([HgCl2/AC] Cl5, Eads > 0) accounting for >10% of Hg2+ emissions. Quantitative tracking demonstrates alarming mercury loss of per gram catalyst (5 wt % Hg) reached as 3.08 mg Hg0 and 9.01 mg Hg2+, directly linked to localized thermal gradients (ΔT = 250-300 °C) at reaction hotspots. This work establishes the first experimentally validated framework for mercury fate prediction in carbide-based PVC synthesis, providing actionable strategies for emission control through hotspot mitigation and coordination environment optimization.
- Top Cited Papers
- 15 May 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (21) , 17975-17984
Single-Crystal Metal–Organic and Covalent Organic Framework Hybrids Enable Efficient Photoelectrochemical CO2 Reduction to Ethanol
Multicarbon alcohols produced through photochemical and electrochemical CO2 reduction reactions (CO2RR) are promising alternatives to fossil fuels; however, their selectivity and efficiency remain low due to the high energy barrier for C-C coupling and the competition from hydrocarbon production. Here, we present a strategy to enhance ethanol efficiency and selectivity via cooperative catalysis in porous structures for photoelectrochemical (PEC) CO2RR. Using a coordination-templated strategy, we synthesized single crystals of MOF-COF (MOCOF) hybrids with metalloporphyrins, with their structures determined by single-crystal 3D electron diffraction. The porous frameworks featuring adjacent confined metalloporphyrins efficiently capture and cooperatively activate CO2, achieving outstanding PEC CO2-to-ethanol conversion. Particularly, the Pt-MOCOF delivers a Faradaic efficiency (FE) of 83.5% at -1.0 V with 91.7% carbon selectivity, surpassing state-of-the-art COF or MOF catalysts and ranking it among the top-performing catalysts. The catalyst system displays remarkable stability, maintaining 95% of its activity after 100 h of continuous operation. Experiments and theoretical calculations revealed that the cooperative catalyst enriches and stabilizes intermediates in the channels, guiding the reaction pathway toward ethanol production.
- 15 May 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (21) , 17975-17984
Top Cited PapersSingle-Crystal Metal–Organic and Covalent Organic Framework Hybrids Enable Efficient Photoelectrochemical CO2 Reduction to Ethanol
Multicarbon alcohols produced through photochemical and electrochemical CO2 reduction reactions (CO2RR) are promising alternatives to fossil fuels; however, their selectivity and efficiency remain low due to the high energy barrier for C-C coupling and the competition from hydrocarbon production. Here, we present a strategy to enhance ethanol efficiency and selectivity via cooperative catalysis in porous structures for photoelectrochemical (PEC) CO2RR. Using a coordination-templated strategy, we synthesized single crystals of MOF-COF (MOCOF) hybrids with metalloporphyrins, with their structures determined by single-crystal 3D electron diffraction. The porous frameworks featuring adjacent confined metalloporphyrins efficiently capture and cooperatively activate CO2, achieving outstanding PEC CO2-to-ethanol conversion. Particularly, the Pt-MOCOF delivers a Faradaic efficiency (FE) of 83.5% at -1.0 V with 91.7% carbon selectivity, surpassing state-of-the-art COF or MOF catalysts and ranking it among the top-performing catalysts. The catalyst system displays remarkable stability, maintaining 95% of its activity after 100 h of continuous operation. Experiments and theoretical calculations revealed that the cooperative catalyst enriches and stabilizes intermediates in the channels, guiding the reaction pathway toward ethanol production.
- 25 March 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (14) , 12127-12137
Single-Crystal X-ray Structures of Homochiral Brønsted Acidic Covalent Organic Frameworks
Determining the crystal structures of covalent organic frameworks (COFs) with atomic precision is pivotal for uncovering their properties and optimizing functionalities. However, the synthesis of high-quality single crystals of COFs suitable for X-ray diffraction analysis, especially chiral COFs (CCOFs), remains a formidable challenge. In this work, we report two three-dimensional (3D) CCOFs synthesized via imine condensation of tetrahedral tetraamine and tetraaldehydes derived from optically active 1,1'-biphenol phosphoryl chloride or thiophosphoryl chloride. Single crystals of varying sizes are obtained through either a low-temperature modulation strategy, yielding large crystals up to 100 μm, or a solvothermal method. The large single crystals are structurally characterized by single-crystal X-ray diffraction, achieving a resolution of 0.90 Å. These two CCOFs are isostructural and each features a 4-fold interpenetrated diamondoid open framework with all phosphoric acid groups periodically aligned within tubular helical channels, displaying enhanced Brønsted acidity compared to non-immobilized acids. The frameworks exhibit permanent porosity, chemical resistance in boiling water, 14 M NaOH, and 0.1 M HCl, and thermal stability up to 400 °C. Notably, these CCOFs serve as efficient and recyclable heterogeneous Brønsted acid catalysts in the asymmetric addition to aromatic aldehydes, enantioselective transfer hydrogenation of ketimines, and three-component direct asymmetric Mannich reactions involving aldimines and cyclic ketones, achieving good to high enantioselectivities (up to 99.5% ee) that surpass those obtained in analogous systems with homogeneous catalysts. This work represents the first successful demonstration of single-crystal structures of homochiral COFs, paving the way for in-depth investigations into structure-property relationships in enantioselective processes and facilitating the design of novel functional chiral organic materials.
- 25 March 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (14) , 12127-12137
Single-Crystal X-ray Structures of Homochiral Brønsted Acidic Covalent Organic Frameworks
Determining the crystal structures of covalent organic frameworks (COFs) with atomic precision is pivotal for uncovering their properties and optimizing functionalities. However, the synthesis of high-quality single crystals of COFs suitable for X-ray diffraction analysis, especially chiral COFs (CCOFs), remains a formidable challenge. In this work, we report two three-dimensional (3D) CCOFs synthesized via imine condensation of tetrahedral tetraamine and tetraaldehydes derived from optically active 1,1'-biphenol phosphoryl chloride or thiophosphoryl chloride. Single crystals of varying sizes are obtained through either a low-temperature modulation strategy, yielding large crystals up to 100 μm, or a solvothermal method. The large single crystals are structurally characterized by single-crystal X-ray diffraction, achieving a resolution of 0.90 Å. These two CCOFs are isostructural and each features a 4-fold interpenetrated diamondoid open framework with all phosphoric acid groups periodically aligned within tubular helical channels, displaying enhanced Brønsted acidity compared to non-immobilized acids. The frameworks exhibit permanent porosity, chemical resistance in boiling water, 14 M NaOH, and 0.1 M HCl, and thermal stability up to 400 °C. Notably, these CCOFs serve as efficient and recyclable heterogeneous Brønsted acid catalysts in the asymmetric addition to aromatic aldehydes, enantioselective transfer hydrogenation of ketimines, and three-component direct asymmetric Mannich reactions involving aldimines and cyclic ketones, achieving good to high enantioselectivities (up to 99.5% ee) that surpass those obtained in analogous systems with homogeneous catalysts. This work represents the first successful demonstration of single-crystal structures of homochiral COFs, paving the way for in-depth investigations into structure-property relationships in enantioselective processes and facilitating the design of novel functional chiral organic materials.
- Top Cited Papers
- 21 February 2025
- Published by Springer Nature in Nature Synthesis
- Vol. 4 (6) , 720-729
Selective electrocatalytic synthesis of urea using entangled iron porphyrins in covalent organic frameworks
- 21 February 2025
- Published by Springer Nature in Nature Synthesis
- Vol. 4 (6) , 720-729
Top Cited PapersSelective electrocatalytic synthesis of urea using entangled iron porphyrins in covalent organic frameworks
- 30 December 2024
- Published by Wiley in Advanced Materials
- Vol. 37 (52) , e2415574
Reticulating Crystalline Porous Materials for Asymmetric Heterogeneous Catalysis
Asymmetric catalysis is essential for addressing the increasing demand for enantiopure compounds. Recent advances in reticular chemistry have demonstrated that metal–organic frameworks (MOFs) and covalent organic frameworks (COFs) possess highly regular porous architectures, exceptional tunability, and the ability to incorporate chiral functionalities through their open channels or cavities. These characteristics make them highly effective and enantioselective catalysts for a wide range of asymmetric transformations. The chiral microenvironments within these frameworks facilitate precise control over reactant orientation and transition states, enhancing both catalytic activity and enantioselectivity, thereby offering significant advantages over traditional systems. This review overviews recent developments in chiral MOFs (CMOFs) and chiral COFs (CCOFs), focusing on their design strategies, and synthetic methods, and highlights the structure–property relationships that connect key structural features to asymmetric catalytic performance. Additionally, the current challenges and future prospects in this field are addressed, highlighting the pivotal role of reticular chemistry in the creation of chiral porous materials. It is anticipated that this review will inspire further research into the application of crystalline porous materials in asymmetric catalysis and promote the rational design of novel chiral heterogeneous catalysts for industrial use.
- 30 December 2024
- Published by Wiley in Advanced Materials
- Vol. 37 (52) , e2415574
Reticulating Crystalline Porous Materials for Asymmetric Heterogeneous Catalysis
Asymmetric catalysis is essential for addressing the increasing demand for enantiopure compounds. Recent advances in reticular chemistry have demonstrated that metal–organic frameworks (MOFs) and covalent organic frameworks (COFs) possess highly regular porous architectures, exceptional tunability, and the ability to incorporate chiral functionalities through their open channels or cavities. These characteristics make them highly effective and enantioselective catalysts for a wide range of asymmetric transformations. The chiral microenvironments within these frameworks facilitate precise control over reactant orientation and transition states, enhancing both catalytic activity and enantioselectivity, thereby offering significant advantages over traditional systems. This review overviews recent developments in chiral MOFs (CMOFs) and chiral COFs (CCOFs), focusing on their design strategies, and synthetic methods, and highlights the structure–property relationships that connect key structural features to asymmetric catalytic performance. Additionally, the current challenges and future prospects in this field are addressed, highlighting the pivotal role of reticular chemistry in the creation of chiral porous materials. It is anticipated that this review will inspire further research into the application of crystalline porous materials in asymmetric catalysis and promote the rational design of novel chiral heterogeneous catalysts for industrial use.
- 7 November 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (46) , 31807-31815
Modulator-Directed Counterintuitive Catenation Control for Crafting Highly Porous and Robust Metal–Organic Frameworks with Record High SO2 Uptake Capacity
Sulfur dioxide (SO2) is an important industrial feedstock that can be directly utilized or catalytically transformed to value-added chemicals such as sulfuric acid. The development of regenerable porous sorbents for the highly efficient storage and energy-minimal release of toxic SO2 operating under ambient conditions has attracted growing interest. Herein, we report the topology-guided construction of highly porous acs-type metal-organic frameworks (MOFs) through a counterintuitive modulator-directed catenation control approach. In contrast to the conventional modulator facilitated coordination competition that favors the thermodynamic catenated phase, we show that the elevation of modulator concentration can promote the formation of the noncatenated phase probably through a sublattice dissolution pathway. The assembly of a custom-designed trigonal prismatic triptycene-quinoxaline linker and trinuclear Fe3O cluster affords either the threefold catenated SJTU-219 or noncatenated SJTU-220 with desired acs net. Impressively, the synthetic approach is applicable to various metal ions, including Al3+, V3+, and even Ti4+. The noncatenated SJTU-220 exhibits an extraordinary SO2 sorption capacity of 29.6 mmol g-1 at 298 K and 1 bar, surpassing all reported solid sorbents. The uptake capacity can be further raised to 35.6 mmol g-1 via the replacement of Fe3+ with kinetically more inert Cr3+, resulting in a staggering ∼329-fold volume reduction compared with free ideal SO2 gas. Computational simulations suggest that unique Fe3+···S(SO2) interactions dominate the SO2 seeding process, facilitating the efficient packing of SO2 molecules in the large channels. Besides, the exceptionally low uptake at the low pressure region implies global weak framework-SO2 interactions, which offer great potential for practically implementing an "easy-on/easy-off" SO2 delivery system.
- 7 November 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (46) , 31807-31815
Modulator-Directed Counterintuitive Catenation Control for Crafting Highly Porous and Robust Metal–Organic Frameworks with Record High SO2 Uptake Capacity
Sulfur dioxide (SO2) is an important industrial feedstock that can be directly utilized or catalytically transformed to value-added chemicals such as sulfuric acid. The development of regenerable porous sorbents for the highly efficient storage and energy-minimal release of toxic SO2 operating under ambient conditions has attracted growing interest. Herein, we report the topology-guided construction of highly porous acs-type metal-organic frameworks (MOFs) through a counterintuitive modulator-directed catenation control approach. In contrast to the conventional modulator facilitated coordination competition that favors the thermodynamic catenated phase, we show that the elevation of modulator concentration can promote the formation of the noncatenated phase probably through a sublattice dissolution pathway. The assembly of a custom-designed trigonal prismatic triptycene-quinoxaline linker and trinuclear Fe3O cluster affords either the threefold catenated SJTU-219 or noncatenated SJTU-220 with desired acs net. Impressively, the synthetic approach is applicable to various metal ions, including Al3+, V3+, and even Ti4+. The noncatenated SJTU-220 exhibits an extraordinary SO2 sorption capacity of 29.6 mmol g-1 at 298 K and 1 bar, surpassing all reported solid sorbents. The uptake capacity can be further raised to 35.6 mmol g-1 via the replacement of Fe3+ with kinetically more inert Cr3+, resulting in a staggering ∼329-fold volume reduction compared with free ideal SO2 gas. Computational simulations suggest that unique Fe3+···S(SO2) interactions dominate the SO2 seeding process, facilitating the efficient packing of SO2 molecules in the large channels. Besides, the exceptionally low uptake at the low pressure region implies global weak framework-SO2 interactions, which offer great potential for practically implementing an "easy-on/easy-off" SO2 delivery system.
- 28 February 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (10) , 6733-6743
Covalent Organic Frameworks with Tunable Chirality for Chiral-Induced Spin Selectivity
Chiral covalent organic frameworks (CCOFs) have attracted extensive interest for their potential applications in various enantioselective processes. However, the exploitation of chirality-induced spin selectivity (CISS) that enables a new technology for the injection of spin polarized current without the need for a permanent magnetic layer within CCOFs remains a largely untapped area of research. Here, we demonstrate that, for the first time, COFs can be an attractive platform to develop spin filter materials with efficient CISS. This facilitates the design and synthesis of a new family of Zn(salen)-based 2D CCOFs, namely, CCOFs-9-12, by imine condensation of chiral 1,2-diaminocyclohexane and tri- or tetra(salicylaldehyde) derivatives. CCOF-9, distinguished by its unique C2 symmetric "armchair" tetrasubstituted pyrene conformation, exhibits the most pronounced chirality among these materials and serves as a solid-state host, enabling the enantioselective adsorption of racemic drugs with an enantiomeric excess (ee) of up to 97%. After substituting diamagnetic zinc(II) ions for paramagnetic cobalt(II), the resulting CCOF-9-Co not only retains its high crystallinity, porosity, and exceptional chirality but also exhibits enhanced conductivity, a crucial factor for the effective observation of CISS. Magnetic conductive atomic force microscopy showed that CCOF-9-Co exhibited a remarkable CISS effect with up to an 88-94% spin polarization ratio. This phenomenon is further confirmed by the increased intensity in the magnetic circular dichroism (MCD) when CCOF-9-Co is under an external magnetic field. This work therefore shows the tremendous potential of CCOFs for controlling spin selectivity and will stimulate the creation of new types of crystalline polymers with strong CISS effects for spin filters.
- 28 February 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (10) , 6733-6743
Covalent Organic Frameworks with Tunable Chirality for Chiral-Induced Spin Selectivity
Chiral covalent organic frameworks (CCOFs) have attracted extensive interest for their potential applications in various enantioselective processes. However, the exploitation of chirality-induced spin selectivity (CISS) that enables a new technology for the injection of spin polarized current without the need for a permanent magnetic layer within CCOFs remains a largely untapped area of research. Here, we demonstrate that, for the first time, COFs can be an attractive platform to develop spin filter materials with efficient CISS. This facilitates the design and synthesis of a new family of Zn(salen)-based 2D CCOFs, namely, CCOFs-9-12, by imine condensation of chiral 1,2-diaminocyclohexane and tri- or tetra(salicylaldehyde) derivatives. CCOF-9, distinguished by its unique C2 symmetric "armchair" tetrasubstituted pyrene conformation, exhibits the most pronounced chirality among these materials and serves as a solid-state host, enabling the enantioselective adsorption of racemic drugs with an enantiomeric excess (ee) of up to 97%. After substituting diamagnetic zinc(II) ions for paramagnetic cobalt(II), the resulting CCOF-9-Co not only retains its high crystallinity, porosity, and exceptional chirality but also exhibits enhanced conductivity, a crucial factor for the effective observation of CISS. Magnetic conductive atomic force microscopy showed that CCOF-9-Co exhibited a remarkable CISS effect with up to an 88-94% spin polarization ratio. This phenomenon is further confirmed by the increased intensity in the magnetic circular dichroism (MCD) when CCOF-9-Co is under an external magnetic field. This work therefore shows the tremendous potential of CCOFs for controlling spin selectivity and will stimulate the creation of new types of crystalline polymers with strong CISS effects for spin filters.