Cigdem Cakirlar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Cigdem Cakirlar has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Jens Trommer
NaMLAb gGmbH Dresden Germany
5 shared publications - Giulio Galderisi
NaMLab gGmbH, Dresden, Germany
4 shared publications - Thomas Mikolajick
NaMLAb gGmbH Dresden Germany
4 shared publications Bruno Neckel Wesling
NaMLab gGmbH Nöthnitzer Str. 64a 01187 Dresden Germany
2 shared publicationsChristoph Beyer
Namlab gGmbH Dresden Saxony Germany
2 shared publicationsKonstantinos Moustakas
LAAS‐CNRS University of Toulouse CNRS 7 Avenue du Colonel Roche 31031 Toulouse France
2 shared publications
Latest Publications
- 2 November 2026
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (21) , e70579
Enabling High‐Frequency Characterization for Dynamic Modeling of Schottky Barrier Field‐Effect Transistors
This work presents a comprehensive methodology describing static and dynamic characterization and compact modeling of an ambipolar Schottky barrier field‐effect transistor (SBFET) technology, taking into consideration the integration of specifically designed test structures necessary for accurate scattering parameter measurements. In this work, we demonstrate, for the first time, the complete design flow for this emerging technology, starting with design and fabrication of dedicated high‐frequency test structures for scattering‐parameter measurement up to 110 GHz. The high frequency data are then used to validate a physics‐based compact model for the ambipolar SBFETs. Physically meaningful results are obtained with a good agreement between the measured and compact model data, demonstrating the usefulness of such dedicated methodologies for the refinement of the emerging technology performance.
- 2 November 2026
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (21) , e70579
Enabling High‐Frequency Characterization for Dynamic Modeling of Schottky Barrier Field‐Effect Transistors
This work presents a comprehensive methodology describing static and dynamic characterization and compact modeling of an ambipolar Schottky barrier field‐effect transistor (SBFET) technology, taking into consideration the integration of specifically designed test structures necessary for accurate scattering parameter measurements. In this work, we demonstrate, for the first time, the complete design flow for this emerging technology, starting with design and fabrication of dedicated high‐frequency test structures for scattering‐parameter measurement up to 110 GHz. The high frequency data are then used to validate a physics‐based compact model for the ambipolar SBFETs. Physically meaningful results are obtained with a good agreement between the measured and compact model data, demonstrating the usefulness of such dedicated methodologies for the refinement of the emerging technology performance.
- 21 October 2026
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (21)
Electrostatics of Common‐Channel Reconfigurable Field‐Effect Transistors: From X‐Shape to U‐Shape
This work investigates the effect of scaling on the electrostatic behavior of cross‐shape reconfigurable field‐effect transistors (RFETs) using three‐dimensional technology computer‐aided design simulations. The emerging device concept consists of multiple nanowires in a junction of a common channel, where multiple gates are aligned on the silicon and silicide junction interface, enabling polarity switching and signal routing within a compact layout. Although such a geometry can be utilized for new directions in neuromorphic or analog computation, it significantly increases the electrostatic interactions. The focus of the work is to understand the impact of the gate‐to‐gate distance and nanowire width on the on‐state current. The energy barrier in the ungated common‐channel region was found to be the limiting factor, as excessive fringing field coupling at short gate‐to‐gate distances causes electrostatic crowding and barrier sharpening, thereby restricting carrier transport. To overcome the electrostatic limitation of the cross‐shape RFET, a three‐dimensional U‐shape RFET was proposed. Due to its gate‐all‐around coverage of the metal–semiconductor junctions, electrostatic control was found to be stronger. U‐shape geometry achieves a high on‐state current with a minimal sensitivity to gate‐to‐gate distance variations. This work derives practical design guidelines for 3D RFET architectures, aiming to balance device compactness and electrostatic efficiency.
- 21 October 2026
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (21)
Electrostatics of Common‐Channel Reconfigurable Field‐Effect Transistors: From X‐Shape to U‐Shape
This work investigates the effect of scaling on the electrostatic behavior of cross‐shape reconfigurable field‐effect transistors (RFETs) using three‐dimensional technology computer‐aided design simulations. The emerging device concept consists of multiple nanowires in a junction of a common channel, where multiple gates are aligned on the silicon and silicide junction interface, enabling polarity switching and signal routing within a compact layout. Although such a geometry can be utilized for new directions in neuromorphic or analog computation, it significantly increases the electrostatic interactions. The focus of the work is to understand the impact of the gate‐to‐gate distance and nanowire width on the on‐state current. The energy barrier in the ungated common‐channel region was found to be the limiting factor, as excessive fringing field coupling at short gate‐to‐gate distances causes electrostatic crowding and barrier sharpening, thereby restricting carrier transport. To overcome the electrostatic limitation of the cross‐shape RFET, a three‐dimensional U‐shape RFET was proposed. Due to its gate‐all‐around coverage of the metal–semiconductor junctions, electrostatic control was found to be stronger. U‐shape geometry achieves a high on‐state current with a minimal sensitivity to gate‐to‐gate distance variations. This work derives practical design guidelines for 3D RFET architectures, aiming to balance device compactness and electrostatic efficiency.
- Open Access
- 14 October 2026
- Published by Wiley in Advanced Science
- p. e78121
Re‐Thinking Electronic Circuit Design Through Emerging Reconfigurable Field Effect Transistors
Reconfigurable field‐effect transistors, short RFETs, are a unique class of emerging electronic devices that merge n ‐type, p ‐type, and ambipolar operation modes into a single element. Unlike conventional MOSFETs, the dominant carrier type in RFETs is purely defined by electrostatics and can be dynamically changed at runtime. This enables new design possibilities by enabling post‐fabrication functionality definition, thereby increasing circuit density and adaptability without requiring additional feature‐size scaling. However, the added value of the devices requires a reassessment of classical design paradigms to unlock their full potential. This paper aims to provide a comprehensive review of the state of the art in RFET circuit design. Starting from the underlying device physics and material systems, such as group‐IV and two‐dimensional (2D) materials, the manifold circuit design possibilities in digital, analog, and post‐Shannon computing are introduced. We highlight how RFETs aim to enable simplified, energy‐efficient, and reusable hardware for edge computing, hardware security, bio‐sensing, and cryogenic electronics. Thereby, device‐ and circuit‐level results are exemplified by measurements of transistors fabricated in an industrial 22 nm FDSOI technology. The paper also provides an overview of future key challenges in reliability, BEOL integration, and electronic design automation, offering an outlook on the path towards scalable, sustainable reconfigurable electronics.
- 14 October 2026
- Published by Wiley in Advanced Science
- p. e78121
Open AccessRe‐Thinking Electronic Circuit Design Through Emerging Reconfigurable Field Effect Transistors
Reconfigurable field‐effect transistors, short RFETs, are a unique class of emerging electronic devices that merge n ‐type, p ‐type, and ambipolar operation modes into a single element. Unlike conventional MOSFETs, the dominant carrier type in RFETs is purely defined by electrostatics and can be dynamically changed at runtime. This enables new design possibilities by enabling post‐fabrication functionality definition, thereby increasing circuit density and adaptability without requiring additional feature‐size scaling. However, the added value of the devices requires a reassessment of classical design paradigms to unlock their full potential. This paper aims to provide a comprehensive review of the state of the art in RFET circuit design. Starting from the underlying device physics and material systems, such as group‐IV and two‐dimensional (2D) materials, the manifold circuit design possibilities in digital, analog, and post‐Shannon computing are introduced. We highlight how RFETs aim to enable simplified, energy‐efficient, and reusable hardware for edge computing, hardware security, bio‐sensing, and cryogenic electronics. Thereby, device‐ and circuit‐level results are exemplified by measurements of transistors fabricated in an industrial 22 nm FDSOI technology. The paper also provides an overview of future key challenges in reliability, BEOL integration, and electronic design automation, offering an outlook on the path towards scalable, sustainable reconfigurable electronics.
- Open Access
- 23 September 2025
- Published by Wiley in Advanced Electronic Materials
- Vol. 11 (18)
Process Integration of U‐Shape Ambipolar Schottky–Barrier Field‐Effect Transistors
Research on transistors with various architectures is crucial for developing high‐performance, compact devices, as they improve the functionality of integrated circuits within the same or smaller footprint. Simulation studies have shown that transistors fabricated using a U‐shape channel have a higher functionality as their natural geometry enables the realization of gate‐all‐around structures and long channel lengths within a small footprint. The experimental realization of the transistor is essential for exploring circuit applications. This paper presents the process integration route and the first experimental results of a U‐shape ambipolar Schottky barrier field effect transistor. Also, a detailed explanation of the challenges in fabricating a 3D transistor and the improvement steps are given. The fabricated device demonstrates highly symmetrical on‐currents for both p‐ and n‐branches. Self‐aligned contact formation and atomic force microscopy imaging are used to simplify fabrication and facilitate 3D structural monitoring. In addition, the formation of self‐aligned contacts in the proposed device architecture is significantly simplified compared to traditional 3D architectures. TCAD simulations are also performed to support the experimental findings and demonstrate the device's future potential and scalability. In conclusion, it effectively addresses the challenges of the fabrication of 3D transistors and drives innovations in device design with its silicon‐on‐insulator body.
- 23 September 2025
- Published by Wiley in Advanced Electronic Materials
- Vol. 11 (18)
Open AccessProcess Integration of U‐Shape Ambipolar Schottky–Barrier Field‐Effect Transistors
Research on transistors with various architectures is crucial for developing high‐performance, compact devices, as they improve the functionality of integrated circuits within the same or smaller footprint. Simulation studies have shown that transistors fabricated using a U‐shape channel have a higher functionality as their natural geometry enables the realization of gate‐all‐around structures and long channel lengths within a small footprint. The experimental realization of the transistor is essential for exploring circuit applications. This paper presents the process integration route and the first experimental results of a U‐shape ambipolar Schottky barrier field effect transistor. Also, a detailed explanation of the challenges in fabricating a 3D transistor and the improvement steps are given. The fabricated device demonstrates highly symmetrical on‐currents for both p‐ and n‐branches. Self‐aligned contact formation and atomic force microscopy imaging are used to simplify fabrication and facilitate 3D structural monitoring. In addition, the formation of self‐aligned contacts in the proposed device architecture is significantly simplified compared to traditional 3D architectures. TCAD simulations are also performed to support the experimental findings and demonstrate the device's future potential and scalability. In conclusion, it effectively addresses the challenges of the fabrication of 3D transistors and drives innovations in device design with its silicon‐on‐insulator body.
- 23 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 24 (1536125X) , 356-362
Recent Challenges in the Fabrication of Vertical Silicon Nanowire Transistors
Vertical silicon nanowire transistors are among the most promising device concepts for future low-power electronics due to their gate-all-around nature as well as their 3D stacking potential. In this work we review the current status of transistor fabrication on vertical silicon nanostructures and identify the most important challenges for successful process integration. Channel patterning, source/drain contact formation, gate-deposition and spacer engineering are identified as key steps independent on the actual process integration sequence. We conclude the paper with two emerging device examples and discuss the influence of the processing challenges on the transistor design.
- 23 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 24 (1536125X) , 356-362
Recent Challenges in the Fabrication of Vertical Silicon Nanowire Transistors
Vertical silicon nanowire transistors are among the most promising device concepts for future low-power electronics due to their gate-all-around nature as well as their 3D stacking potential. In this work we review the current status of transistor fabrication on vertical silicon nanostructures and identify the most important challenges for successful process integration. Channel patterning, source/drain contact formation, gate-deposition and spacer engineering are identified as key steps independent on the actual process integration sequence. We conclude the paper with two emerging device examples and discuss the influence of the processing challenges on the transistor design.
- Open Access
- 17 May 2023
- Published by Elsevier in Materials Today Electronics
- Vol. 4
Cross-shape reconfigurable field effect transistor for flexible signal routing
- 17 May 2023
- Published by Elsevier in Materials Today Electronics
- Vol. 4
Open AccessCross-shape reconfigurable field effect transistor for flexible signal routing