Oleg V. Bereziuk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Oleg V. Bereziuk has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
V.O. Kharzhevskyi
Khmelnitskyi National University
8 shared publicationsV.I. Savulyak
Vinnitsa National Technical University
7 shared publications- Valeriy Savulyak
Vinnytsia National Technical University, Ukraine
5 shared publications Vinnytsia National Technical University
5 shared publications- Oleksandr Petrov
Vinnytsia National Technical University
4 shared publications - Viacheslav Kharzhevskyi
Khmelnytskyi National University, Ukraine
4 shared publications
Latest Publications
- 2 October 2026
- Published by Springer Nature
- p. 235-248
Influence of Working Fluid Temperature and Delivery Coefficient of Regulated Axial Piston Pump on Power Supplied to Hydraulic Motor
- 2 October 2026
- Published by Springer Nature
- p. 235-248
Influence of Working Fluid Temperature and Delivery Coefficient of Regulated Axial Piston Pump on Power Supplied to Hydraulic Motor
- Open Access
- 30 March 2026
- Published by Vinnytsia National Technical University in Journal of Mechanical Engineering and Transport
- Vol. 23 (1) , 11-16
Duration dependence of loading municipal solid waste into a garbage truck on the container clamping force
Increasing the accuracy of positioning the garbage truck manipulator is an important factor in ensuring the reliability and safety of the container loading process, while controlling its clamping force allows minimizing damage to the container, reducing dynamic loads on the structure, and increasing the durability of the hydraulic drive and cinematic units. Therefore, determining the regression dependence of the duration of loading municipal solid waste into a garbage truck on the container clamping force, which can be used when developing a methodology for engineering calculations of the parameters of the mechanism for loading municipal solid waste into a garbage truck, is an urgent technical and scientific problem. The purpose of the study is to construct, using regression analysis, the regression dependence of the duration of loading municipal solid waste into a garbage truck on the container clamping force, which can be used when developing a methodology for engineering calculations of the parameters of the mechanism for loading municipal solid waste into a garbage truck. During the study, the regression analysis method of the single-factor experiments results and other pairwise dependencies was used with the selection of the most adequate type of function from the sixteen most common options according to the criterion of the maximum value of the correlation coefficient. The regression was carried out on the basis of linearization transformations, which allow reducing the nonlinear dependence to a linear one. The regression equations coefficients were determined by the method of least squares using the developed computer program "RegAnaliz". The regression dependence of the duration of loading municipal solid waste into a garbage truck on the container clamping force was obtained, which can be used when developing a methodology for engineering calculations of the parameters of the mechanism for loading municipal solid waste into a garbage truck. A graphical dependence of the duration of loading municipal solid waste into a garbage truck on the container clamping force was constructed, which allows us to clearly illustrate this dependence and show sufficient convergence of the theoretical results with actual ones. It has been established that the duration of loading municipal solid waste into a garbage truck increases according to a power law relationship as the container clamping force increases.
- 30 March 2026
- Published by Vinnytsia National Technical University in Journal of Mechanical Engineering and Transport
- Vol. 23 (1) , 11-16
Open AccessDuration dependence of loading municipal solid waste into a garbage truck on the container clamping force
Increasing the accuracy of positioning the garbage truck manipulator is an important factor in ensuring the reliability and safety of the container loading process, while controlling its clamping force allows minimizing damage to the container, reducing dynamic loads on the structure, and increasing the durability of the hydraulic drive and cinematic units. Therefore, determining the regression dependence of the duration of loading municipal solid waste into a garbage truck on the container clamping force, which can be used when developing a methodology for engineering calculations of the parameters of the mechanism for loading municipal solid waste into a garbage truck, is an urgent technical and scientific problem. The purpose of the study is to construct, using regression analysis, the regression dependence of the duration of loading municipal solid waste into a garbage truck on the container clamping force, which can be used when developing a methodology for engineering calculations of the parameters of the mechanism for loading municipal solid waste into a garbage truck. During the study, the regression analysis method of the single-factor experiments results and other pairwise dependencies was used with the selection of the most adequate type of function from the sixteen most common options according to the criterion of the maximum value of the correlation coefficient. The regression was carried out on the basis of linearization transformations, which allow reducing the nonlinear dependence to a linear one. The regression equations coefficients were determined by the method of least squares using the developed computer program "RegAnaliz". The regression dependence of the duration of loading municipal solid waste into a garbage truck on the container clamping force was obtained, which can be used when developing a methodology for engineering calculations of the parameters of the mechanism for loading municipal solid waste into a garbage truck. A graphical dependence of the duration of loading municipal solid waste into a garbage truck on the container clamping force was constructed, which allows us to clearly illustrate this dependence and show sufficient convergence of the theoretical results with actual ones. It has been established that the duration of loading municipal solid waste into a garbage truck increases according to a power law relationship as the container clamping force increases.
- Open Access
- 17 March 2026
- Published by Khmelnytskyi National University in Problems of tribology
- Vol. 31 (1/119)
Improved algorithm for engineering calculations of the parameters of a container tipping mechanism in a garbage truck taking into account the wear of friction pairs
The article is dedicated to the development of the scientifically grounded improved method, based on the analysis of scientific literature sources, for the design calculation of the parameters of a mechanism for tipping a container with municipal solid waste into a garbage truck, taking into account friction wear, in order to determine its main geometric, force, and speed parameters. The drive of the working parts of the mechanism for tipping a container with municipal solid waste into a garbage truck is hydraulic, with a power source from the garbage truck’s pump station. The usage of the proposed improved methodology for the engineering calculation of the parameters of the mechanism for tipping a container with municipal solid waste into a garbage truck, taking into account the wear of friction pairs, allows significant reduction in design time and avoids unnecessary costs for labor-intensive experimental and theoretical research. Using the proposed scientifically based improved method of design calculation of the parameters of the mechanism for tipping a container with municipal solid waste into a garbage truck, taking into account the wear of friction pairs, its main geometric, force, and speed parameters have been determined. It has been established that the development of an improved methodology for the design calculation of the parameters of the mechanism for rotating the manipulator lever during the loading of municipal solid waste into a garbage truck, taking into account the wear of friction pairs, requires further research
- 17 March 2026
- Published by Khmelnytskyi National University in Problems of tribology
- Vol. 31 (1/119)
Open AccessImproved algorithm for engineering calculations of the parameters of a container tipping mechanism in a garbage truck taking into account the wear of friction pairs
The article is dedicated to the development of the scientifically grounded improved method, based on the analysis of scientific literature sources, for the design calculation of the parameters of a mechanism for tipping a container with municipal solid waste into a garbage truck, taking into account friction wear, in order to determine its main geometric, force, and speed parameters. The drive of the working parts of the mechanism for tipping a container with municipal solid waste into a garbage truck is hydraulic, with a power source from the garbage truck’s pump station. The usage of the proposed improved methodology for the engineering calculation of the parameters of the mechanism for tipping a container with municipal solid waste into a garbage truck, taking into account the wear of friction pairs, allows significant reduction in design time and avoids unnecessary costs for labor-intensive experimental and theoretical research. Using the proposed scientifically based improved method of design calculation of the parameters of the mechanism for tipping a container with municipal solid waste into a garbage truck, taking into account the wear of friction pairs, its main geometric, force, and speed parameters have been determined. It has been established that the development of an improved methodology for the design calculation of the parameters of the mechanism for rotating the manipulator lever during the loading of municipal solid waste into a garbage truck, taking into account the wear of friction pairs, requires further research
- Open Access
- 15 December 2025
- Published by Khmelnytskyi National University in Problems of tribology
- Vol. 30 (4/118)
Analytical study of an improved mathematical model of the hydraulic drive of the garbage truck’s sealing plate mechanism, taking into account the wear of its hydraulic cylinder
The article is dedicated to the analytical study of the improved mathematical model of the hydraulic drive of the garbage truck’s sealing plate mechanism, in which the influence of the wear of the hydraulic cylinder on its operation is additionally taken into account. On the basis of the numerical studies of the improved nonlinear mathematical model of the hydraulic drive of the garbage truck’s sealing plate mechanism, which takes into account the wear of the hydraulic cylinder, its linearized modification was created, presented in the form of a system of ordinary linear differential equations of the second order. To perform design calculations of new modifications of garbage trucks, approximate analytical expressions were obtained that describe the change in time of the pressure in the hydraulic cylinder’s pressure line, as well as the speed and movement of the sealing plate based on the proposed linearized mathematical model of the hydraulic drive of the garbage truck’s sealing plate mechanism, taking into account the wear of the hydraulic cylinder. The obtained regression equation that provides the possibility of an approximate determination of the duration of the process of compacting municipal solid waste in a garbage truck, taking into account the wear of the hydraulic cylinder.
- 15 December 2025
- Published by Khmelnytskyi National University in Problems of tribology
- Vol. 30 (4/118)
Open AccessAnalytical study of an improved mathematical model of the hydraulic drive of the garbage truck’s sealing plate mechanism, taking into account the wear of its hydraulic cylinder
The article is dedicated to the analytical study of the improved mathematical model of the hydraulic drive of the garbage truck’s sealing plate mechanism, in which the influence of the wear of the hydraulic cylinder on its operation is additionally taken into account. On the basis of the numerical studies of the improved nonlinear mathematical model of the hydraulic drive of the garbage truck’s sealing plate mechanism, which takes into account the wear of the hydraulic cylinder, its linearized modification was created, presented in the form of a system of ordinary linear differential equations of the second order. To perform design calculations of new modifications of garbage trucks, approximate analytical expressions were obtained that describe the change in time of the pressure in the hydraulic cylinder’s pressure line, as well as the speed and movement of the sealing plate based on the proposed linearized mathematical model of the hydraulic drive of the garbage truck’s sealing plate mechanism, taking into account the wear of the hydraulic cylinder. The obtained regression equation that provides the possibility of an approximate determination of the duration of the process of compacting municipal solid waste in a garbage truck, taking into account the wear of the hydraulic cylinder.
- Open Access
- 1 December 2025
- Published by Vinnytsia National Technical University in Journal of Mechanical Engineering and Transport
- Vol. 21 (1)
Analysis of the structures and drives of the executive bodies of the mechanisms for unloading municipal solid waste from garbage trucks
The purpose of the study is to analyze the design features and types of drives of the working bodies of the mechanisms that ensure the process of unloading municipal solid waste from garbage trucks, in order to further determine the directions of their technical improvement and increase energy efficiency. Within the framework of the work, a study of existing designs and hydraulic schemes of drives used in mechanisms for unloading municipal solid waste was carried out by analyzing scientific literature sources, technical documentation and patent materials. The purpose of this analysis is to identify patterns, advantages and disadvantages of modern technical solutions, as well as to determine promising ways to improve drive systems to increase their reliability, efficiency and reduce energy losses during operation. The hydraulic drive of the working bodies of garbage trucks, as a rule, receives power from the central pumping station of the vehicle, which creates the necessary pressure to perform the operations of compression, lifting, tipping and unloading of waste. The paper presents and analyzes the structural diagrams of unloading mechanisms developed both in domestic and foreign practice. The comparative analysis showed that a typical problem for most models of garbage trucks is the use of a hydraulic drive with one unregulated pump, which operates with a constant flow regardless of the current load. In such systems, the speed of movement of the working elements is regulated mainly by throttling the flow, as a result of which the excess working fluid under high pressure is discharged through a safety valve into the hydraulic tank. This leads to significant unproductive power losses, increased energy consumption, overheating of the working fluid and a decrease in the overall efficiency of the hydraulic system. The results of the analysis showed that one of the most promising directions for the modernization of such systems is the introduction of load-sensitive hydraulic circuits that provide automatic regulation of the pump flow in accordance with the needs of the actuators. The use of such systems allows to significantly reduce power losses, optimize energy consumption, reduce noise level and temperature load on the hydraulic system. As a result, this contributes to increasing the efficiency of hydraulic drive control of working bodies in various operating modes, improving the reliability of municipal solid waste unloading mechanisms and extending the service life of hydraulic equipment.
- 1 December 2025
- Published by Vinnytsia National Technical University in Journal of Mechanical Engineering and Transport
- Vol. 21 (1)
Open AccessAnalysis of the structures and drives of the executive bodies of the mechanisms for unloading municipal solid waste from garbage trucks
The purpose of the study is to analyze the design features and types of drives of the working bodies of the mechanisms that ensure the process of unloading municipal solid waste from garbage trucks, in order to further determine the directions of their technical improvement and increase energy efficiency. Within the framework of the work, a study of existing designs and hydraulic schemes of drives used in mechanisms for unloading municipal solid waste was carried out by analyzing scientific literature sources, technical documentation and patent materials. The purpose of this analysis is to identify patterns, advantages and disadvantages of modern technical solutions, as well as to determine promising ways to improve drive systems to increase their reliability, efficiency and reduce energy losses during operation. The hydraulic drive of the working bodies of garbage trucks, as a rule, receives power from the central pumping station of the vehicle, which creates the necessary pressure to perform the operations of compression, lifting, tipping and unloading of waste. The paper presents and analyzes the structural diagrams of unloading mechanisms developed both in domestic and foreign practice. The comparative analysis showed that a typical problem for most models of garbage trucks is the use of a hydraulic drive with one unregulated pump, which operates with a constant flow regardless of the current load. In such systems, the speed of movement of the working elements is regulated mainly by throttling the flow, as a result of which the excess working fluid under high pressure is discharged through a safety valve into the hydraulic tank. This leads to significant unproductive power losses, increased energy consumption, overheating of the working fluid and a decrease in the overall efficiency of the hydraulic system. The results of the analysis showed that one of the most promising directions for the modernization of such systems is the introduction of load-sensitive hydraulic circuits that provide automatic regulation of the pump flow in accordance with the needs of the actuators. The use of such systems allows to significantly reduce power losses, optimize energy consumption, reduce noise level and temperature load on the hydraulic system. As a result, this contributes to increasing the efficiency of hydraulic drive control of working bodies in various operating modes, improving the reliability of municipal solid waste unloading mechanisms and extending the service life of hydraulic equipment.
- Open Access
- 22 September 2025
- Published by Khmelnytskyi National University in Problems of tribology
- Vol. 30 (3/117) , 30-40
Analytical study of a hydraulic drive model for a municipal waste container overturning mechanism in a garbage truck considering the wear of friction pairs
The article is dedicated to the analytical study of the improved mathematical model of the hydraulic drive of the mechanism for overturning a container with municipal solid waste into a garbage truck, taking into account the wear of friction pairs. As a result of the analysis of the performed numerical studies of the nonlinear improved mathematical model of the hydraulic drive of the mechanism for overturning a container with municipal solid waste into a garbage truck, taking into account the wear of friction pairs, a linearized version of this model was developed in the system of ordinary linear differential equations of the 2nd order. To carry out design calculations of new garbage truck designs, approximate analytical dependencies were obtained for the pressure in the hydraulic cylinder pressure line, the angular velocity and the angle of container overturning on time were obtained based on the proposed linearized mathematical model of the hydraulic drive of the container overturning mechanism in the technological operation of loading municipal solid waste into the garbage truck during the 1st phase – overturning the container to the equilibrium position, taking into account the wear of friction pairs. It was established that the analytical study of the linearized improved mathematical model of the hydraulic drive of the mechanism for loading municipal solid waste into a garbage truck, taking into account the wear of friction pairs during the 2nd phase – pouring waste from the container into the body of the garbage truck requires further research
- 22 September 2025
- Published by Khmelnytskyi National University in Problems of tribology
- Vol. 30 (3/117) , 30-40
Open AccessAnalytical study of a hydraulic drive model for a municipal waste container overturning mechanism in a garbage truck considering the wear of friction pairs
The article is dedicated to the analytical study of the improved mathematical model of the hydraulic drive of the mechanism for overturning a container with municipal solid waste into a garbage truck, taking into account the wear of friction pairs. As a result of the analysis of the performed numerical studies of the nonlinear improved mathematical model of the hydraulic drive of the mechanism for overturning a container with municipal solid waste into a garbage truck, taking into account the wear of friction pairs, a linearized version of this model was developed in the system of ordinary linear differential equations of the 2nd order. To carry out design calculations of new garbage truck designs, approximate analytical dependencies were obtained for the pressure in the hydraulic cylinder pressure line, the angular velocity and the angle of container overturning on time were obtained based on the proposed linearized mathematical model of the hydraulic drive of the container overturning mechanism in the technological operation of loading municipal solid waste into the garbage truck during the 1st phase – overturning the container to the equilibrium position, taking into account the wear of friction pairs. It was established that the analytical study of the linearized improved mathematical model of the hydraulic drive of the mechanism for loading municipal solid waste into a garbage truck, taking into account the wear of friction pairs during the 2nd phase – pouring waste from the container into the body of the garbage truck requires further research
- Open Access
- 28 June 2025
- Published by Kyiv National University of Construction and Architecture in Ventilation, Illumination and Heat Gas Supply
- Vol. 53, 33-42
Dynamics regression of the capacity growth of biogas production plants in the landfills territory of Ukraine
The global ecological crisis is prompting countries to introduce modern alternative energy sources to meet the needs of the population, in particular to develop technologies for the extraction and processing of biogas. Therefore, the determination of a regression dependence that describes the dynamics of increasing the capacity of biogas production plants in the territory of landfills in Ukraine and can be used when forecasting the capacity of such plants is an urgent scientific and technical task. The purpose of the study is to determine a regression dependence that describes the dynamics of increasing the capacity of biogas production plants in the territory of landfills in Ukraine and can be used when forecasting the capacity of such plants, in order to increase the prevalence of the use of renewable energy sources, save fossil fuels and simultaneously reduce the intensity of environmental pollution. During the study, the method of regression analysis of the results of single-factor experiments and other pairwise dependencies was used with the selection of a rational type of function from the sixteen most common options according to the criterion of the maximum value of the correlation coefficient. The regression was carried out on the basis of linear transformations, which allow reducing the nonlinear dependence to a linear one. The coefficients of the regression equations were determined by the least squares method using the developed computer program "RegAnaliz", which is protected by a certificate of copyright registration for the work. An adequate regression dependence was obtained, which describes the dynamics of increasing the capacity of biogas production plants in the territory of landfills in Ukraine and can be used when forecasting the capacity of such plants. A graphical dependence was constructed, which describes the dynamics of increasing the capacity of biogas production plants in the territory of landfills in Ukraine and allows us to clearly illustrate this dynamics and show sufficient convergence of theoretical results with actual data. It was established that the capacity of biogas production plants in the territory of landfills in Ukraine during 2012-2020 grew according to a power dependence.
- 28 June 2025
- Published by Kyiv National University of Construction and Architecture in Ventilation, Illumination and Heat Gas Supply
- Vol. 53, 33-42
Open AccessDynamics regression of the capacity growth of biogas production plants in the landfills territory of Ukraine
The global ecological crisis is prompting countries to introduce modern alternative energy sources to meet the needs of the population, in particular to develop technologies for the extraction and processing of biogas. Therefore, the determination of a regression dependence that describes the dynamics of increasing the capacity of biogas production plants in the territory of landfills in Ukraine and can be used when forecasting the capacity of such plants is an urgent scientific and technical task. The purpose of the study is to determine a regression dependence that describes the dynamics of increasing the capacity of biogas production plants in the territory of landfills in Ukraine and can be used when forecasting the capacity of such plants, in order to increase the prevalence of the use of renewable energy sources, save fossil fuels and simultaneously reduce the intensity of environmental pollution. During the study, the method of regression analysis of the results of single-factor experiments and other pairwise dependencies was used with the selection of a rational type of function from the sixteen most common options according to the criterion of the maximum value of the correlation coefficient. The regression was carried out on the basis of linear transformations, which allow reducing the nonlinear dependence to a linear one. The coefficients of the regression equations were determined by the least squares method using the developed computer program "RegAnaliz", which is protected by a certificate of copyright registration for the work. An adequate regression dependence was obtained, which describes the dynamics of increasing the capacity of biogas production plants in the territory of landfills in Ukraine and can be used when forecasting the capacity of such plants. A graphical dependence was constructed, which describes the dynamics of increasing the capacity of biogas production plants in the territory of landfills in Ukraine and allows us to clearly illustrate this dynamics and show sufficient convergence of theoretical results with actual data. It was established that the capacity of biogas production plants in the territory of landfills in Ukraine during 2012-2020 grew according to a power dependence.
- Open Access
- 18 June 2025
- Published by Khmelnytskyi National University in Problems of tribology
- Vol. 30 (2/116) , 34-41
Improved mathematical model of the hydraulic drive of the garbage truck’s sealing plate mechanism taking into account the wear of its hydraulic cylinder
This article is dedicated to the improvement of the mathematical model of the hydraulic drive of the mechanism of the garbage truck’s sealing plate, taking into account the wear of the hydraulic cylinder. An improved nonlinear mathematical model of the operation of the hydraulic drive of the garbage truck’s sealing plate mechanism is proposed, which takes into account the wear of the hydraulic cylinder and allows to numerically study the dynamics of the drive and determine that taking into account the wear of the hydraulic cylinder significantly affects the main parameters of the hydraulic drive of the garbage truck’s sealing plate mechanism. This study of the mathematical model was carried out using the fourth-order numerical Runge-Kutta-Felberg method with an adaptive integration step. Graphical dependencies were plotted to compare changes in the main parameters of the hydraulic drive of the garbage truck’s sealing plate mechanism without taking into account the wear of the hydraulic cylinder and with taking into account the wear. It has been established that the creation of a linearized mathematical model of the hydraulic drive of the garbage truck’s sealing plate mechanism, taking into account the wear of the hydraulic cylinder
- 18 June 2025
- Published by Khmelnytskyi National University in Problems of tribology
- Vol. 30 (2/116) , 34-41
Open AccessImproved mathematical model of the hydraulic drive of the garbage truck’s sealing plate mechanism taking into account the wear of its hydraulic cylinder
This article is dedicated to the improvement of the mathematical model of the hydraulic drive of the mechanism of the garbage truck’s sealing plate, taking into account the wear of the hydraulic cylinder. An improved nonlinear mathematical model of the operation of the hydraulic drive of the garbage truck’s sealing plate mechanism is proposed, which takes into account the wear of the hydraulic cylinder and allows to numerically study the dynamics of the drive and determine that taking into account the wear of the hydraulic cylinder significantly affects the main parameters of the hydraulic drive of the garbage truck’s sealing plate mechanism. This study of the mathematical model was carried out using the fourth-order numerical Runge-Kutta-Felberg method with an adaptive integration step. Graphical dependencies were plotted to compare changes in the main parameters of the hydraulic drive of the garbage truck’s sealing plate mechanism without taking into account the wear of the hydraulic cylinder and with taking into account the wear. It has been established that the creation of a linearized mathematical model of the hydraulic drive of the garbage truck’s sealing plate mechanism, taking into account the wear of the hydraulic cylinder