Alberto Ubaldini

Updating Conflicts of Interest Statement

Hydrogel films are a promising class of materials due to their peculiar property of retaining water as well as responding to external stimuli. In contrast with conventional hydrogels, films provide enhanced responsiveness along with greater compliance to be integrated into devices as well as on surfaces. This review is designed to comprehensively explore the many aspects of hydrogel films. It covers the principles of gelation; preparation methods, such as solvent casting, spin coating, and photolithography; and characterization. This review also presents the most common polymers (both natural and synthetic) utilized for the preparation of the hydrogel, the systems, such as nanoparticles, liposomes and hybrid metal–organic structure, that can be used as additives and the aspects related to the biocompatibility of hydrogels. In the second part, this review discusses the potential applications of hydrogel films and the challenges that still need to be overcome. Particular attention is given to biomedical applications, such as drug delivery, wound healing, and tissue engineering, but environmental and agricultural uses are also explored. Finally, this review presents recent examples of real-world applications of hydrogel films and explores the possibility they have for a wide variety of needs.

Hydrogel films receive significant attention among researchers because they combine increased stimuli responsiveness and faster responses to the already excellent properties of their component materials. However, their preparation is complex and requires that many difficulties are overcome. The present work presents a new study regarding the preparation of pure and nanoparticle-loaded alginate-based films by spin-coating. Two-microliter solutions of sodium alginate and calcium chloride with different concentrations were deposited on a glass substrate and subjected to rapid rotations of between 100 and 1000 RPM. Film formation can be achieved by optimizing the ratio between the viscosity of the solutions, depending on their concentrations and the rotation speed. When these conditions are in the right range, a homogeneous film is obtained, showing good adherence to the substrate and uniform thickness. Films containing silver nanoparticles were prepared, exploiting the reaction between sodium borohydride and silver nitrate. The two reagents were added to the sodium alginate and calcium nitrate solution, respectively. Their concentration is the driving force for the formation of a uniform film: particles of about 50 nm that are well-dispersed throughout the film are obtained using AgNO₃ at 4 mM and NaBH₄ at 2 or 0.2 mM; meanwhile, at higher concentrations, one can also obtain the precipitation of inorganic crystals.

Hypochlorous acid solutions are used as effective disinfectants in many settings, including operating rooms and other hospital environments. During and after the COVID-19 pandemic, their use increased significantly, and this work stems from that development. In fact, despite their undoubtedly excellent properties, these solutions can constitute a very aggressive system for a variety of different materials that are very common in those environments. Materials that can be subject to corrosion include steels, copper-based alloys, and components in electronic devices. This work aims to investigate the responses of these materials to long but intermittent exposures to HClO disinfectant solutions. It consists of a compatibility test, performed on several reference materials with HClO used as a surface disinfectant, connected with NaCl’s eventual presence/deposition over them. To perform the investigations in a manner consistent with the duration of compatible laboratory analyses, the samples were immersed in electrolytically prepared HClO solutions for 750 h, which is a duration considered equivalent to normal exposure to disinfectant aerosols over 3 years. Analyzing the large amount of experimental data gathered yielded interesting results. Where the exposure of non-metallic materials or steel did not lead to compatibility issues, bare metals showed degradation due to salt deposition. This article summarizes the morphological studies, i.e., a huge experimental work conducted at the ENEA IMPACT lab in Bologna and part of the PhD work of the corresponding author.

Hydrogels represent a versatile class of materials with remarkable potential as three-dimensional matrices for nanoparticle integration. This study explores the mechanism of silver nanoparticle formation within a polyacrylamide–alginate hybrid hydrogel, employing a controlled reduction–oxidation reaction between silver nitrate (AgNO₃) and sodium borohydride (NaBH₄) across a temperature gradient (5–70 °C). Characterization techniques, including Raman, infrared, and UV-Vis spectroscopies, X-ray diffraction, and scanning electron microscopy, were employed to analyze the structural and optical properties of the nanoparticles and the hydrogel. The results show that, as the temperature rose, nanoparticle numbers decreased, while their size increased. Consistently octahedral in shape and averaging 100–120 nm, these nanoparticles revealed a temperature-dependent growth pattern, with rare larger crystals emerging more frequently at higher temperatures. The findings highlight the potential of hybrid hydrogels as effective matrices for the incorporation of metal nanoparticles, paving the way for applications in drug delivery, biosensing, and antimicrobial treatments.

The poor prognosis of pancreatic cancer requires novel treatment options. This review examines the evolution of radiopharmaceuticals in the treatment of pancreatic cancer. Established strategies such as peptide receptor radionuclide therapy (PRRT) offer targeted and effective treatment, compared to conventional treatments. However, there are currently no radiopharmaceuticals approved for the treatment of pancreatic cancer in Europe, which requires further research and novel approaches. New radiopharmaceuticals including radiolabeled antibodies, peptides, and nanotechnological approaches are promising in addressing the challenges of pancreatic cancer therapy. These new agents may offer more specific targeting and potentially improve efficacy compared to traditional therapies. Further research is needed to optimize efficacy, address limitations, and explore the overall potential of these new strategies in the treatment of this aggressive and harmful pathology.

During the restoration and digitalization intervention of the Manoscritto Parmense (Ms. Parm.) 3285 codex, a 14th-century illuminated volume that contains the three books of Dante Alighieri’s Divina Commedia belonging to the Biblioteca Palatina of Parma, the deposits present in the center of some bifoliums were removed using soft bristle brushes and collected. A preliminary observation of these deposits with a stereomicroscope allowed the detection of some pigment grains of different colors, likely detached from the full-page illuminations at the beginning of each book. These grains of the pigments were then analyzed in the Bologna ENEA Research Centre through Scanning Electron Microscopy (SEM), EDX microanalysis, and micro-Raman spectroscopy, allowing the identification of the minerals or the compounds used as pigments. Consequently, some pigments that were commonly used in the Middle Ages such as gold leaf, typically employed in illuminations and the decoration of heading initials, cinnabar red, and different types of blue pigments, including traces of lapis lazuli and azurite, were identified.

Boric acid, H₃BO₃, is a molecular solid made up of layers held together by weak van der Waals forces. It can be considered a pseudo “2D” material, like graphite, compared to graphene. The key distinction is that within each individual layer, the molecular units are connected not only by strong covalent bonds but also by hydrogen bonds. Therefore, classic liquid exfoliation is not suitable for this material, and a specific method needs to be developed. Preliminary results of exfoliation of boric acid particles by combination of ultrasound and the use of surfactants are presented. Ultrasound provides the system with the energy needed for the process, and the surfactant can act to keep the crystalline flakes apart. A system consisting of a saturated solution and large excess solid residue of boric acid was treated in this way for a few hours at 40 °C in the presence of various sodium stearate, proving to be very promising, and an incipient exfoliation was achieved.

A simple and effective method to eliminate the organic component from mussel shells is presented. It is based on the use of hot hydrogen peroxide. Mollusc shells are composite materials made of a calcium carbonate matrix with different polymorphs and numerous biomacromolecules. The described method was used on mussel shells, but it is generalisable and allows the complete removal of these organic components, without altering the inorganic part. Specimens were kept in a H₂O₂ 40% bath for few hours at 70 °C. The organic layers found on the faces of the shells were peeled away in this way, and biomacromolecules were degraded and removed. Their fragments are soluble in aqueous solution. This easily permits the chemical-physical characterisation and the study of the microstructure. The quality of calcite and aragonite microcrystals of biogenic origin is very high, superior to that of materials of geological or synthetic origin. This may suggest various industrial applications for them. Calcium carbonate is a useful precursor for cements and other building materials, and the one obtained in this way is of excellent quality and high purity.

The corrosion behavior of certain steels under extremely oxidative conditions, simulating the impact of water radiolysis on stainless steels, has been investigated. Radiolysis generates aggressive species, including radicals, solvated electrons, and hydrogen peroxide, potentially leading to corrosion over time in materials typically considered resistant. To expedite the kinetics of this phenomenon, drastic conditions were employed, involving high concentrations of peroxide in a strongly acidic environment. Under these conditions, corrosion can manifest rapidly. The varied responses of different steels are contingent upon their inherent nature and chemical composition, notably the chromium and nickel content. Steels with higher chromium and nickel concentrations exhibit increased resistance to corrosion, even in such severe environments. Microscopic corrosion mechanisms involve pitting and intergranular corrosion. Pitting results in the formation of craters on surfaces, while intergranular corrosion leads to the detachment of grains.