Shunbo Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Shunbo Wang has a total of 85 co-authors. Here are the top co-authors by number of shared publications:
- Hongwei Zhao
Jilin University
10 shared publications Xianke Li
Key Laboratory of CNC Equipment Reliability Ministry of Education School of Mechanical and Aerospace Engineering Jilin University Changchun P. R. China
6 shared publicationsCong Li
School of Mechanical & Aerospace Engineering, Jilin University, Changchun, China
3 shared publicationsHao Wu
Key Laboratory of CNC Equipment Reliability, Ministry of Education Jilin University Changchun China
3 shared publicationsXiangyu Zong
School of Missile Engineering Rocket Force University of Engineering Xi'an China
3 shared publicationsXinhang Yang
School of Mechanical & Aerospace Engineering, Jilin University, Changchun, China
3 shared publications
Latest Publications
- 10 September 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (44)
Modular Donor–Acceptor Pairing Strategy Manipulating Weaving of Covalent Organic Polymer Crystals
Weaving or orderly stacking one‐dimensional chains endow covalent organic polymers (COPs) with attractive physical and chemical properties. However, harnessing interpretable design principles to drive and regulate the spontaneous entanglement of single molecular chains remains a significant challenge. In this study, inspired by the friction in macroscopic textiles, we propose a modular strategy to manipulate weaving through constructing donor–acceptor interdigitated covalent organic chains and tuning their twisting angles. To validate its soundness and feasibility, we synthesized three crystalline COPs (p‐BNF, m‐BNF, and p‐MeBNF) as exemplars with chemically similar main chains, yet distinct weaving or stacking patterns, which bestows them with varying organic semiconductor and mechanical properties. This work provides a promising strategy for the development of woven crystalline COPs and highlights the unique opportunities for delicate controls in semiconductors, mechanical materials and other scenes through weaving‐topology based strategies.
- 10 September 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (44)
Modular Donor–Acceptor Pairing Strategy Manipulating Weaving of Covalent Organic Polymer Crystals
Weaving or orderly stacking one‐dimensional chains endow covalent organic polymers (COPs) with attractive physical and chemical properties. However, harnessing interpretable design principles to drive and regulate the spontaneous entanglement of single molecular chains remains a significant challenge. In this study, inspired by the friction in macroscopic textiles, we propose a modular strategy to manipulate weaving through constructing donor–acceptor interdigitated covalent organic chains and tuning their twisting angles. To validate its soundness and feasibility, we synthesized three crystalline COPs (p‐BNF, m‐BNF, and p‐MeBNF) as exemplars with chemically similar main chains, yet distinct weaving or stacking patterns, which bestows them with varying organic semiconductor and mechanical properties. This work provides a promising strategy for the development of woven crystalline COPs and highlights the unique opportunities for delicate controls in semiconductors, mechanical materials and other scenes through weaving‐topology based strategies.
- 10 September 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (44) , e5777526
Modular Donor–Acceptor Pairing Strategy Manipulating Weaving of Covalent Organic Polymer Crystals
Weaving or orderly stacking one‐dimensional chains endow covalent organic polymers (COPs) with attractive physical and chemical properties. However, harnessing interpretable design principles to drive and regulate the spontaneous entanglement of single molecular chains remains a significant challenge. In this study, inspired by the friction in macroscopic textiles, we propose a modular strategy to manipulate weaving through constructing donor–acceptor interdigitated covalent organic chains and tuning their twisting angles. To validate its soundness and feasibility, we synthesized three crystalline COPs (p‐BNF, m‐BNF, and p‐MeBNF) as exemplars with chemically similar main chains, yet distinct weaving or stacking patterns, which bestows them with varying organic semiconductor and mechanical properties. This work provides a promising strategy for the development of woven crystalline COPs and highlights the unique opportunities for delicate controls in semiconductors, mechanical materials and other scenes through weaving‐topology based strategies.
- 10 September 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (44) , e5777526
Modular Donor–Acceptor Pairing Strategy Manipulating Weaving of Covalent Organic Polymer Crystals
Weaving or orderly stacking one‐dimensional chains endow covalent organic polymers (COPs) with attractive physical and chemical properties. However, harnessing interpretable design principles to drive and regulate the spontaneous entanglement of single molecular chains remains a significant challenge. In this study, inspired by the friction in macroscopic textiles, we propose a modular strategy to manipulate weaving through constructing donor–acceptor interdigitated covalent organic chains and tuning their twisting angles. To validate its soundness and feasibility, we synthesized three crystalline COPs (p‐BNF, m‐BNF, and p‐MeBNF) as exemplars with chemically similar main chains, yet distinct weaving or stacking patterns, which bestows them with varying organic semiconductor and mechanical properties. This work provides a promising strategy for the development of woven crystalline COPs and highlights the unique opportunities for delicate controls in semiconductors, mechanical materials and other scenes through weaving‐topology based strategies.
- 13 August 2026
- Published by Wiley in Advanced Functional Materials
The Influence of Poling Conditions on the Mechanical Properties of Ferroelectric Single Crystal PMN‐PT
Relaxor ferroelectric Pb(Mg 1/3 Nb 2/3 )O 3 ‐(1‐ x )PbTiO 3 (PMN‐PT) exhibits excellent electromechanical coupling properties. During service, PMN‐PT is subjected to electromechanical loading, which may induce functional device failures, such as phase transitions, domain switching, and cracking. However, the associated damage mechanisms remain poorly understood. In this study, nanoindentation was employed to investigate the mechanical behavior and microstructural evolution of [001]‐oriented PMN‐0.28PT single crystals under alternating current‐poled (ACP), direct current‐poled (DCP), and unpoled (UNP) conditions. The results revealed that poling altered the domain‐wall state, increasing the hardness of the samples while reducing the fracture toughness. Compared with the DCP samples, the ACP samples exhibited improved piezoelectric properties along with degraded mechanical performance; furthermore, all samples exhibited a significant indentation size effect. Raman spectroscopy revealed phase transitions in the material under mechanical loading. Scanning transmission electron microscope analysis confirmed the occurrence of domain switching and a rhombohedral‐to‐tetragonal phase transition beneath the indent in the ACP samples. Furthermore, shear stress was identified as the dominant factor governing crack initiation. Based on these observations, a model describing microstructural evolution and crack propagation during mechanical loading was established. This study elucidates the microstructural evolution of PMN‐PT under mechanical loading and offers design strategies for enhancing its overall performance.
- 13 August 2026
- Published by Wiley in Advanced Functional Materials
The Influence of Poling Conditions on the Mechanical Properties of Ferroelectric Single Crystal PMN‐PT
Relaxor ferroelectric Pb(Mg 1/3 Nb 2/3 )O 3 ‐(1‐ x )PbTiO 3 (PMN‐PT) exhibits excellent electromechanical coupling properties. During service, PMN‐PT is subjected to electromechanical loading, which may induce functional device failures, such as phase transitions, domain switching, and cracking. However, the associated damage mechanisms remain poorly understood. In this study, nanoindentation was employed to investigate the mechanical behavior and microstructural evolution of [001]‐oriented PMN‐0.28PT single crystals under alternating current‐poled (ACP), direct current‐poled (DCP), and unpoled (UNP) conditions. The results revealed that poling altered the domain‐wall state, increasing the hardness of the samples while reducing the fracture toughness. Compared with the DCP samples, the ACP samples exhibited improved piezoelectric properties along with degraded mechanical performance; furthermore, all samples exhibited a significant indentation size effect. Raman spectroscopy revealed phase transitions in the material under mechanical loading. Scanning transmission electron microscope analysis confirmed the occurrence of domain switching and a rhombohedral‐to‐tetragonal phase transition beneath the indent in the ACP samples. Furthermore, shear stress was identified as the dominant factor governing crack initiation. Based on these observations, a model describing microstructural evolution and crack propagation during mechanical loading was established. This study elucidates the microstructural evolution of PMN‐PT under mechanical loading and offers design strategies for enhancing its overall performance.
- 29 July 2026
- Published by Springer Nature in Journal of Materials Science
- Vol. 61 (36) , 27266-27287
Enhancing the high-temperature wear resistance of copper via EHEA coatings prepared by reverse thermal infiltration
- 29 July 2026
- Published by Springer Nature in Journal of Materials Science
- Vol. 61 (36) , 27266-27287
Enhancing the high-temperature wear resistance of copper via EHEA coatings prepared by reverse thermal infiltration
- Open Access
- 24 June 2026
- Published by MDPI AG in Micromachines
- Vol. 17 (7) , 766
Effects of Buoyancy and Surface Roughness on Mechanical Characterization of Shipbuilding Steel by Immersion Instrumented Indentation
To develop the applications of nanoindentation in a liquid environment, a higher requirement has been presented for evaluating measured errors of micromechanical performance, particularly for the immersion indentation. In this study, a numerical investigation was conducted to explore the influence of buoyancy and surface roughness on the indentation responses of EH36 steel. The results show that a difference in indentation load–depth curves and mechanical properties with and without the buoyancy effect is observed as the indentation depth increases. The relative calculated errors of reduced modulus and indentation hardness are more than 25.35% and 1.92%, respectively. Meanwhile, as the surface roughness increases, a pronounced increase in the data scatter of indentation responses is observed, especially at shallow nanoindentations. The coupling effects of buoyancy and surface roughness on the deviation of indentation data exhibit a competitive relationship rather than a simple cumulative effect. The measured errors of reduced modulus at roughness values below 0.10 μm are predominantly affected by buoyancy during immersion indentations, while the surface roughness is the main factor in other cases. This study provides a comprehensive understanding of these factors and predicts the qualitative variations in micromechanical responses under assumed immersed conditions.
- 24 June 2026
- Published by MDPI AG in Micromachines
- Vol. 17 (7) , 766
Open AccessEffects of Buoyancy and Surface Roughness on Mechanical Characterization of Shipbuilding Steel by Immersion Instrumented Indentation
To develop the applications of nanoindentation in a liquid environment, a higher requirement has been presented for evaluating measured errors of micromechanical performance, particularly for the immersion indentation. In this study, a numerical investigation was conducted to explore the influence of buoyancy and surface roughness on the indentation responses of EH36 steel. The results show that a difference in indentation load–depth curves and mechanical properties with and without the buoyancy effect is observed as the indentation depth increases. The relative calculated errors of reduced modulus and indentation hardness are more than 25.35% and 1.92%, respectively. Meanwhile, as the surface roughness increases, a pronounced increase in the data scatter of indentation responses is observed, especially at shallow nanoindentations. The coupling effects of buoyancy and surface roughness on the deviation of indentation data exhibit a competitive relationship rather than a simple cumulative effect. The measured errors of reduced modulus at roughness values below 0.10 μm are predominantly affected by buoyancy during immersion indentations, while the surface roughness is the main factor in other cases. This study provides a comprehensive understanding of these factors and predicts the qualitative variations in micromechanical responses under assumed immersed conditions.
- 20 April 2026
- Published by Springer Nature in Acta Mechanica Sinica
- Vol. 42 (7) , 425495
Investigation of subsurface damage mechanisms of Zn-Fe alloy coatings via novel in-situ indentation
- 20 April 2026
- Published by Springer Nature in Acta Mechanica Sinica
- Vol. 42 (7) , 425495
Investigation of subsurface damage mechanisms of Zn-Fe alloy coatings via novel in-situ indentation
- 16 March 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (16)
Design and experimental study of an in-situ indentation/scratch testing device with high load capacity for scanning electron microscope
In situ indentation/scratch testing technique is a crucial method for analyzing material mechanics and damage evolution. However, conventional instruments suffer from limitations such as low load capacity and destructive backward motion. In this study, an in-situ indentation/scratch instrument coupled with scanning electron microscope was developed. Hybrid motor-piezoelectric actuation was designed, enabling ultra-long stroke loading and unloading free from mechanical backlash. The compact design incorporates a motor-driven XY stage with 40.5 mm Z-height, maintaining high load capacity while eliminating backlash errors. Integrated PID control, high-ratio reducers, and encoders achieve 10 nm/s to 80 µm/s stepless motion with precise XYZ positioning, accommodating both coarse alignment and fine loading. Following calibration, functional tests were conducted on brittle monocrystalline silicon, Q235 steel, and galvanized coatings. The instrument captured crack initiation in silicon under hundred-millinewton loads and correlated subsurface/surface slip in coatings via deep indentation (54 μm). Indentation and backward-free scratch tests on Q235, along with mechanical properties derived from load-displacement curves, demonstrate the equipment's precise testing capability and high data reliability across a broad load range and diverse material systems.
- 16 March 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (16)
Design and experimental study of an in-situ indentation/scratch testing device with high load capacity for scanning electron microscope
In situ indentation/scratch testing technique is a crucial method for analyzing material mechanics and damage evolution. However, conventional instruments suffer from limitations such as low load capacity and destructive backward motion. In this study, an in-situ indentation/scratch instrument coupled with scanning electron microscope was developed. Hybrid motor-piezoelectric actuation was designed, enabling ultra-long stroke loading and unloading free from mechanical backlash. The compact design incorporates a motor-driven XY stage with 40.5 mm Z-height, maintaining high load capacity while eliminating backlash errors. Integrated PID control, high-ratio reducers, and encoders achieve 10 nm/s to 80 µm/s stepless motion with precise XYZ positioning, accommodating both coarse alignment and fine loading. Following calibration, functional tests were conducted on brittle monocrystalline silicon, Q235 steel, and galvanized coatings. The instrument captured crack initiation in silicon under hundred-millinewton loads and correlated subsurface/surface slip in coatings via deep indentation (54 μm). Indentation and backward-free scratch tests on Q235, along with mechanical properties derived from load-displacement curves, demonstrate the equipment's precise testing capability and high data reliability across a broad load range and diverse material systems.
- 29 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-13
Development of a Miniaturized Indentation Device for Extremely Low Temperatures Down to 4.2 K
High-precision indentation testing technique has become one of the most widely used tools for investigating the effects of extremely low temperatures on materials and understanding their underlying evolution mechanisms. In this study, a high-precision and miniaturized indentation device (40 mm × 37 mm × 170 mm) for extremely low temperatures down to 4.2 K was developed. The device integrates a novel load-displacement synchronous detection technique that combines dual laser probes with a fixed-ends flexible beam, effectively addressing the challenges of precise measurement of indentation load and displacement under extreme environments. The maximum indentation load of the device is 2 N and the maximum indentation displacement is 20 μm. The stiffness of the flexible beam was calibrated in segments at different temperatures using standard weights, and a nonlinear fitting method was applied to obtain the relationship between machine compliance and temperature. The practicality and reliability of the calibrated device were demonstrated by indentation tests on a fused silica standard sample at room temperature. Indentation tests were carried out on single crystal copper (100) from room temperature of 300 K to extremely low temperature of 4.2 K. Furthermore, mechanical properties and deformation behaviors at extremely low temperatures were also investigated using various characterization techniques. In addition, the self-developed device can be integrated into any commercial physical property measurement system with a sample chamber diameter of more than 49 mm, providing a powerful tool for evaluating material performance in extreme environments.
- 29 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-13
Development of a Miniaturized Indentation Device for Extremely Low Temperatures Down to 4.2 K
High-precision indentation testing technique has become one of the most widely used tools for investigating the effects of extremely low temperatures on materials and understanding their underlying evolution mechanisms. In this study, a high-precision and miniaturized indentation device (40 mm × 37 mm × 170 mm) for extremely low temperatures down to 4.2 K was developed. The device integrates a novel load-displacement synchronous detection technique that combines dual laser probes with a fixed-ends flexible beam, effectively addressing the challenges of precise measurement of indentation load and displacement under extreme environments. The maximum indentation load of the device is 2 N and the maximum indentation displacement is 20 μm. The stiffness of the flexible beam was calibrated in segments at different temperatures using standard weights, and a nonlinear fitting method was applied to obtain the relationship between machine compliance and temperature. The practicality and reliability of the calibrated device were demonstrated by indentation tests on a fused silica standard sample at room temperature. Indentation tests were carried out on single crystal copper (100) from room temperature of 300 K to extremely low temperature of 4.2 K. Furthermore, mechanical properties and deformation behaviors at extremely low temperatures were also investigated using various characterization techniques. In addition, the self-developed device can be integrated into any commercial physical property measurement system with a sample chamber diameter of more than 49 mm, providing a powerful tool for evaluating material performance in extreme environments.
- 4 July 2025
- Published by Elsevier in Acta Biomaterialia
- Vol. 202, 352-364
Bioinspired fabrication of 3D-printed composites based on multiscale and interfacial architecture of conch shells
- 4 July 2025
- Published by Elsevier in Acta Biomaterialia
- Vol. 202, 352-364
Bioinspired fabrication of 3D-printed composites based on multiscale and interfacial architecture of conch shells