Shigeki Harada
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shigeki Harada has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
Ami Tanno
Higashinihon Concrete Corporation, Japan
2 shared publications- Itsuki Yajima
North Alps Regional Development Bureau, 1058-2 Ohmachi, Ohmachi City 398-8602, Nagano, Japan
1 shared publication - Keitaro Fukushima
Fukushima University
1 shared publication - Nana Yamauchi
Faculty of Food and Agricultural Sciences, Fukushima University, 1 Kanayagawa, Fukushima City 960-1296, Fukushima, Japan
1 shared publication Nobuto Takahashi
Department of Regional Sciences, School of Project Design, Miyagi University, Japan
1 shared publication- Ryuga Iinuma
School of Food and Agricultural Sciences, The Graduate School, Fukushima University, 1 Kanayagawa, Fukushima City 960-1296, Fukushima, Japan
1 shared publication
Latest Publications
- Open Access
Modeling Three-Dimensional Exfiltration Rates from Permeable Street Stormwater Inlets as One-Dimensional Water Flux in Urban Hydrological Models
Climate change has increased the intensity and frequency of weather systems, increasing the risk of inundation in urban areas. To mitigate these risks, not only rivers but also entire catchments need to be managed, and the use of infiltration and retention units needs to be expanded. The ability to evaluate the effects of promoting infiltration and retention in catchments using distributed hydrological models, clarify the three-dimensional behavior of exfiltration from catchments into natural base soils, and parameterize this flow as a one-dimensional hypothetical water flux is essential. Using VGFlow2D (Forum8) and field observations, numerical analyses were conducted to parametrize the flux and assess the features of q/Ks values, representing the volume of three-dimensional water exfiltration from stormwater inlet bases into natural soils relative to the saturated hydraulic conductivity (Ks) of the soils. The findings were integrated into the hydrological model Infoworks ICM (Innovyze) by adding a single parameter, the “exfiltration loss rate”, to each inlet without increasing computational demands. The obtained q/Ks values were compared to previously reported values, and variations were evaluated using infiltration theory.
Open AccessModeling Three-Dimensional Exfiltration Rates from Permeable Street Stormwater Inlets as One-Dimensional Water Flux in Urban Hydrological Models
Climate change has increased the intensity and frequency of weather systems, increasing the risk of inundation in urban areas. To mitigate these risks, not only rivers but also entire catchments need to be managed, and the use of infiltration and retention units needs to be expanded. The ability to evaluate the effects of promoting infiltration and retention in catchments using distributed hydrological models, clarify the three-dimensional behavior of exfiltration from catchments into natural base soils, and parameterize this flow as a one-dimensional hypothetical water flux is essential. Using VGFlow2D (Forum8) and field observations, numerical analyses were conducted to parametrize the flux and assess the features of q/Ks values, representing the volume of three-dimensional water exfiltration from stormwater inlet bases into natural soils relative to the saturated hydraulic conductivity (Ks) of the soils. The findings were integrated into the hydrological model Infoworks ICM (Innovyze) by adding a single parameter, the “exfiltration loss rate”, to each inlet without increasing computational demands. The obtained q/Ks values were compared to previously reported values, and variations were evaluated using infiltration theory.
- Open Access
Retention, Degradation, and Runoff of Plastic-Coated Fertilizer Capsules in Paddy Fields in Fukushima and Miyagi Prefectures, Japan: Consistency of Capsule Degradation Behavior and Variations in Carbon Weight and Stable Carbon Isotope Abundance
Paddy field runoff containing plastic capsules that are used to coat fertilizers has been receiving increased attention. However, the behavior of these capsules, especially their degradation behavior, has not been extensively investigated. We divided the capsules in runoff into two categories: “floating capsules after ploughing” and “floating capsules discharged via pipes at the exits of paddy fields”. The behaviors of the capsules in both types of runoff were monitored in 2022 and 2023 at four paddy fields in Fukushima and Miyagi prefectures in northern Japan. Sampling of capsules in paddy biomass and soil, and comparisons of capsule weight to biomass weight showed that a decrease in plastic capsule weight reflected a decrease in capsule runoff. However, the emergence of clear effects showed a delay of 2 to 3 years, as explained by carbon isotopic analyses. The decrease in the weight of the plastic capsules could be attributed to a combination of capsule degradation and the release of urea inside the capsules, which was also explained by carbon isotopic analyses. Three types of degraded capsules were found: shrunken, broken, and spherical. Statistically significant differences among the weights of each type found.
Open AccessRetention, Degradation, and Runoff of Plastic-Coated Fertilizer Capsules in Paddy Fields in Fukushima and Miyagi Prefectures, Japan: Consistency of Capsule Degradation Behavior and Variations in Carbon Weight and Stable Carbon Isotope Abundance
Paddy field runoff containing plastic capsules that are used to coat fertilizers has been receiving increased attention. However, the behavior of these capsules, especially their degradation behavior, has not been extensively investigated. We divided the capsules in runoff into two categories: “floating capsules after ploughing” and “floating capsules discharged via pipes at the exits of paddy fields”. The behaviors of the capsules in both types of runoff were monitored in 2022 and 2023 at four paddy fields in Fukushima and Miyagi prefectures in northern Japan. Sampling of capsules in paddy biomass and soil, and comparisons of capsule weight to biomass weight showed that a decrease in plastic capsule weight reflected a decrease in capsule runoff. However, the emergence of clear effects showed a delay of 2 to 3 years, as explained by carbon isotopic analyses. The decrease in the weight of the plastic capsules could be attributed to a combination of capsule degradation and the release of urea inside the capsules, which was also explained by carbon isotopic analyses. Three types of degraded capsules were found: shrunken, broken, and spherical. Statistically significant differences among the weights of each type found.
- Open Access
Application of Porous Concrete Infiltration Techniques to Street Stormwater Inlets That Simultaneously Mitigate against Non-Point Heavy Metal Pollution and Stormwater Runoff Reduction in Urban Areas: Catchment-Scale Evaluation of the Potential of Discrete and Small-Scale Techniques
The expansion of pervious areas is an essential and common concept in mitigating non-point pollution runoff in urban areas. In this review, literature related to the expansion of pervious areas is introduced. In addition, the potential application of porous concrete as a medium for constructing the bottom and side walls of street stormwater inlets is investigated. The effectiveness of this medium in reducing (i) the stormwater runoff volume via porous concrete by exfiltrating from the bottom and the wall, and (ii) the heavy metal pollution runoff loads via infiltration through the porous concrete is assessed using data obtained by the author and published in the literature. The urban hydrological model Infoworks ICM (Innovyze) was used to estimate the exfiltration rates through the porous concrete plates set at the bottom and side walls of the street stormwater inlets. The exfiltration rates used in the pre-reported literature varied depending on the methods used. In the present study, sensitivity tests were performed by changing the exfiltration rates. The results of this study indicated that porous concrete used at only the bottom and side walls of the street stormwater inlets is suitable for reducing the runoff volume and removing any heavy metals from stormwater at a catchment scale.
Open AccessApplication of Porous Concrete Infiltration Techniques to Street Stormwater Inlets That Simultaneously Mitigate against Non-Point Heavy Metal Pollution and Stormwater Runoff Reduction in Urban Areas: Catchment-Scale Evaluation of the Potential of Discrete and Small-Scale Techniques
The expansion of pervious areas is an essential and common concept in mitigating non-point pollution runoff in urban areas. In this review, literature related to the expansion of pervious areas is introduced. In addition, the potential application of porous concrete as a medium for constructing the bottom and side walls of street stormwater inlets is investigated. The effectiveness of this medium in reducing (i) the stormwater runoff volume via porous concrete by exfiltrating from the bottom and the wall, and (ii) the heavy metal pollution runoff loads via infiltration through the porous concrete is assessed using data obtained by the author and published in the literature. The urban hydrological model Infoworks ICM (Innovyze) was used to estimate the exfiltration rates through the porous concrete plates set at the bottom and side walls of the street stormwater inlets. The exfiltration rates used in the pre-reported literature varied depending on the methods used. In the present study, sensitivity tests were performed by changing the exfiltration rates. The results of this study indicated that porous concrete used at only the bottom and side walls of the street stormwater inlets is suitable for reducing the runoff volume and removing any heavy metals from stormwater at a catchment scale.
- 1 January 2022
- Published by Japan Society of Hydrology and Water Resources in Hydrological Research Letters
- Vol. 16 (2) , 47-53
Examination of bias of dry weather spot-flow rates compared to the mean flow rates of four periods in three mountain streams with different characteristics: verification of the usage of spot-flow rates to estimate mean discharge loads and implications for appropriate sampling strategies
Our previous study showed a close relationship between spot-flow rate (Q) and periodical (30, 14 and 8 days) mean Q by correlation regression analysis for 64 spot Q readings in 2011–2016. The results suggested that spot Q could be used instead of periodical mean Q in discharge load (L)–flow rate (Q) equations with exponential coefficients that are close to unity. This finding supports the estimation of periodical mean L, even when low frequency samplings to know the concentrations (C) of Chemical Oxygen Demand, Total Organic Carbon, Total Nitrogen, Total Phosphorus and D-SiO2 are conducted. Moreover, changes in the correlation factor and the slope of the regression could be used to estimate the most appropriate sampling frequency. Here, the validity of using the spot Q instead of the periodical (30, 14, 8 and 4 days) mean Q is examined using datasets obtained for the Maekawa River (2011–2015) and the Kurosano River (2015–2017) in addition to the pre-reported Okura River (2011–2016). All three rivers are forestry rivers in Miyagi Prefecture, Japan. Despite the marked variations in differences in their catchment and river characteristics, regression analyses suggested that spot Q is well suited for estimating the periodical mean Q.
- 1 January 2022
- Published by Japan Society of Hydrology and Water Resources in Hydrological Research Letters
- Vol. 16 (2) , 47-53
Examination of bias of dry weather spot-flow rates compared to the mean flow rates of four periods in three mountain streams with different characteristics: verification of the usage of spot-flow rates to estimate mean discharge loads and implications for appropriate sampling strategies
Our previous study showed a close relationship between spot-flow rate (Q) and periodical (30, 14 and 8 days) mean Q by correlation regression analysis for 64 spot Q readings in 2011–2016. The results suggested that spot Q could be used instead of periodical mean Q in discharge load (L)–flow rate (Q) equations with exponential coefficients that are close to unity. This finding supports the estimation of periodical mean L, even when low frequency samplings to know the concentrations (C) of Chemical Oxygen Demand, Total Organic Carbon, Total Nitrogen, Total Phosphorus and D-SiO2 are conducted. Moreover, changes in the correlation factor and the slope of the regression could be used to estimate the most appropriate sampling frequency. Here, the validity of using the spot Q instead of the periodical (30, 14, 8 and 4 days) mean Q is examined using datasets obtained for the Maekawa River (2011–2015) and the Kurosano River (2015–2017) in addition to the pre-reported Okura River (2011–2016). All three rivers are forestry rivers in Miyagi Prefecture, Japan. Despite the marked variations in differences in their catchment and river characteristics, regression analyses suggested that spot Q is well suited for estimating the periodical mean Q.
- 1 January 2021
- Published by Japan Society of Hydrology and Water Resources in Hydrological Research Letters
- Vol. 15 (2) , 31-36
Analyzing the bias in dry weather spot flow rates to periodical mean flow rates in mountain streams: toward determining water pollution loads and optimizing water sampling strategies
Low frequency (once a month) but long-term (ca. 6 years) sampling including snow-melt periods in a mountainous stream, the Okura River (Sendai, Japan), revealed that loadings of 5 parameters (COD, TN, TP, TOC and D-SiO2) could be expressed exponentially using discharge (Q), while the coefficients for the 5 loadings were all about 1. Here, mathematically, the periodically averaged Q leads to approximation of that of load (L). We analyzed the bias of the spot Q to that of the periodical (30, 14 and 8 days) means. The results ensured the utilization of the spot Q instead of the periodical mean Q for estimating L because of the high correlation factors (0.872, 0.914 and 0.923 on 30-, 14-, 8-day mean Q analyses, respectively) and suggested the validity of the usage of the observed regression slopes of 1.06, 1.22, and 1.22 over 30, 14, 8 days for quantitative correction of L because the fact that the slopes are larger than 1 indicate that the usage of the spot Q instead of the mean Q leads to the overestimation of L. Both changing correlation factors and the regression slopes realized small improvements via shortening the periods from 14 to 8 days. The protocol proposed here is quite original and is applicable to designing sampling strategies at target sites based on quantification of the limitations and/or reliability of L estimations.
- 1 January 2021
- Published by Japan Society of Hydrology and Water Resources in Hydrological Research Letters
- Vol. 15 (2) , 31-36
Analyzing the bias in dry weather spot flow rates to periodical mean flow rates in mountain streams: toward determining water pollution loads and optimizing water sampling strategies
Low frequency (once a month) but long-term (ca. 6 years) sampling including snow-melt periods in a mountainous stream, the Okura River (Sendai, Japan), revealed that loadings of 5 parameters (COD, TN, TP, TOC and D-SiO2) could be expressed exponentially using discharge (Q), while the coefficients for the 5 loadings were all about 1. Here, mathematically, the periodically averaged Q leads to approximation of that of load (L). We analyzed the bias of the spot Q to that of the periodical (30, 14 and 8 days) means. The results ensured the utilization of the spot Q instead of the periodical mean Q for estimating L because of the high correlation factors (0.872, 0.914 and 0.923 on 30-, 14-, 8-day mean Q analyses, respectively) and suggested the validity of the usage of the observed regression slopes of 1.06, 1.22, and 1.22 over 30, 14, 8 days for quantitative correction of L because the fact that the slopes are larger than 1 indicate that the usage of the spot Q instead of the mean Q leads to the overestimation of L. Both changing correlation factors and the regression slopes realized small improvements via shortening the periods from 14 to 8 days. The protocol proposed here is quite original and is applicable to designing sampling strategies at target sites based on quantification of the limitations and/or reliability of L estimations.