SMStanislav M. Mikhailichenko

Stanislav M. Mikhailichenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Stanislav M. Mikhailichenko has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optical Photoluminescent Properties of Plant Seeds when Infected with Mycopathogens

    by Mikhail V. Belyakov, Maksim N. Moskovskiy, Igor Yu. Efremenkov, Vasiliy S. Novikov, Sergey M. Kuznetsov, Andrey A. Boyko, Stanislav M. Mikhailichenko

    Introduction. Using digital technologies such as optical monitoring of grain quality will reduce losses of grain crops caused by infection with mycopathogens. Aim of the Study. The study is aimed at investigating spectral characteristics, excitation parameters and luminescence of cereal seeds when infected with mycopathogens to determine informative spectral ranges and subsequent development of infection control methods. Materials and Methods. In the study, there were used wheat and barley seeds inoculated with Fusarium graminearum, Alternaria alternata. Excitation and luminescence registra- tion spectra were measured by a diffraction spectrofluorimeter CM 2203 in the range of 230–600 nm. Integral and statistical parameters of spectra were calculated with the use of Microcal Origin program. Results. It was found that the spectral absorbency of seeds decreases when infected with mycopathogens. For wheat, the integral absorption parameters decrease more significantly when infected with alternaria, and for barley, on the contrary, a greater decrease occurs when infected with fusarium. In the area of 230–310 nm, new excitation maxima appear in infected seeds. When excited by radiation with a wavelength of λ = 284 nm, the spectral and integral characteristics and parameters of infected seeds exceed those for uninfected ones. When excited with 424 nm and 485 nm radiation, the number of disease-free seeds of both wheat and barley exceeds the number of infected seeds. Discussion and Conclusion. The changes in excitation and photoluminescence spectra can be explained by the substitution of polysaccharides and proteins during mycoculture uptake and modification. To objectively monitor the mycopathogen infestation of seeds, it is advisable to use a photoluminescence range of 290–310 nm when excited by radiation of about 284 nm. To determine if the infection caused with fusarium or alternariasis, photoluminescence monitoring should be used in the range of 380–410 nm.


  • Open Access

    Optimization of Volume for an Automatic Feed Wagon by Graph Theory Based Modeling

    by S. M. Mikhailichenko, A. I. Kupreenko, Yu. G. Ivanov, E. A. Nikitin

    В рамках осуществления проекта по разработке роботизированного кормораздатчика первоначальной задачей оказывается определение его габаритных параметров, которые напрямую зависят от объема кормораздатчика. (Цель исследования) Промоделировать работу роботизированного кормораздатчика для определения оптимального объема, при котором обеспечивается универсальность его применения в животноводческих помещениях на фермах крупного рогатого скота с различной численностью животных при разной кратности кормления. (Материалы и методы) Поставленную задачу решали путем вычисления времени, затрачиваемого роботизированным кормораздатчиком на кормление животных, которое не должно превышать предельных величин, установленных зоотехническими нормами. Для этого использовали основанную на теории графов методику, в которой учитывается вероятностный характер составляющих баланса времени раздачи кормосмесей роботизированным кормораздатчиком. Блок вычислений выполнили в программе MS Excel. (Результаты и обсуждение) Описали условия для моделирования. Рассмотрели два варианта работы роботизированных кормораздатчиков, при которых один робот обслуживает два коровника либо для каждого коровника используется отдельный кормораздатчик. (Выводы) Определили, что наиболее предпочтительный второй вариант с отдельным роботизированным кормораздатчиком. Доказали, что в этом случае в результате сокращения протяженности переездов производительность роботизированного кормораздатчика повышается на 27,9-36,2 процента для рассмотренных условий, а также исключается необходимость установки автоматических ворот и возведения утепленного тамбура для перемещения робота между коровниками, упрощается задача по составлению программ кормления. Выявили, что для кормления животных в коровниках с габаритами 111,9 на 26,6 метра и меньших размеров, вмещающих до 340 голов, при кратности кормления 4-8 раз в сутки достаточно использовать роботизированный кормораздатчик объемом 2 кубических метра.


  • Development and simulation of the Feed Pusher Robot software and hardware system for the maintenance of the feed table at livestock facilities

    by Evgeniy A. Nikitin, Denis V. Shilin, Yuriy G. Ivanov, Stanislav M. Mikhailichenko, Dmitriy A. Blagov

    BACKGROUND: Analysis of trends in the development of industrial technologies in the field of agriculture showed that manufacturers of technological equipment used on farms turn to robotics to exclude human labor when performing labor-intensive cyclical operations that are accompanied by a high degree of tension. To perform operations for the preparation and distribution of feed on a farm, maintenance of the feed table, as well as for manure harvesting, it is necessary to use a wheeled robotic platform with an automatic positioning system. AIMS: Development and testing of the software and hardware system of the Feed Pusher robot for the autonomous execution of operations for the maintenance of the feed table at livestock facilities. METHODS: Wheeled robot motion simulation, as well as a mathematical description of the kinematic and dynamic properties of the wheeled robot motion was carried out using the MATLAB software and the Simscape library and the Simulink application. The Figma graphic design software was used to develop layouts of mobile software interfaces for the wheeled robot remote control. RESULTS: During the wheeled robot motion simulation, direct and inverse kinematics problems were solved, consisting in finding theω1,ω2, vectors with the input parameters x0,y0,φ0,x,y,φ, as well as the final angle of the path (relative to the horizontal). Layouts of the robot remote control software interfaces have been developed, as well as the frontend and backend development of the program adapted to the use at a smartphone has been carried out. The testing of the wheeled robot was carried out at a livestock facility, during the maintenance of the feed table and the simultaneous execution of operations to push the feed to the fence and dosing of feed additives. CONCLUSIONS: The practical value of the research lies in the possibility of using the results of the wheeled robot motion simulation to adjust the operation of the automatic positioning system. At the same time, the farmer using the proposed Feed Pusher robot will ensure an increase in the technological efficiency of cattle keeping, in particular dairy cattle, with an increase in milk yields up to 1 liter per day per head, which was determined during the tests on the farm.

  • Open Access

    Development Results of a Cross-Platform Positioning System for a Robotics Feed System at a Dairy Cattle Complex

    by Dmitriy Yu. Pavkin, Evgeniy A. Nikitin, Denis V. Shilin, Mikhail V. Belyakov, Ilya A. Golyshkov, Stanislav Mikhailichenko, Ekaterina Chepurina

    Practical experience demonstrates that the development of agriculture is following the path of automating and robotizing operational processes. The operation of feed pushing in the feeding alley is an integral part of the feeding process and significantly impacts dairy cattle productivity. The aim of this research is to develop an algorithm for automatic positioning and a mobile remote-control system for a wheeled robot on a dairy farm. The kinematic and dynamic motion characteristics of the wheeled robot were obtained using software that allows simulation of physical processes in an artificial environment. The mobile application was developed using Swift tools, with the preliminary visualization of interfaces and graphic design. The system uses technical vision based on RGB cameras and programmed color filters and is responsible for the automatic positioning of the feed-pusher robot. This system made it possible to eliminate the inductive sensors from the system and suspend the labor effort required for assembling the contour wire of the feed alley. By assessing the interaction between the mobile app and the feed pusher via the base station connected to the Internet and located on the farm, the efficiency and accuracy of the feedback was measured. Furthermore, remote changes in the operating regime of the robot (start date) were proven to be achievable, and the productiveness of the food supplement dispenser also became manageable.


  • Open Access

    Feeding system for cattle based on a wheeled robotic feeder

    by Stanislav M. Mikhailichenko, Михайличенко Станислав Михайлович

    BACKGROUND:An analysis of the current state of production of dairy cattle products shows that the effective development of this industry can only be ensured at a breakthrough technological level. There is a wide variety of automatic feeding systems (AFS) on the market, differing in the level of automation, technical complexity and other parameters. They are actively used on foreign farms, however they are not widely used in Russia, mainly because of their high cost. AIMS:Development of a conceptual model of an automatic cattle feeding system based on a wheeled robotic feeder for servicing animals on domestic farms and plants. METHODS:The development was based on the following studies: the analysis of products made by manufacturers of systems for the preparation and distribution of feed mixtures at cattle farms; studying the works of foreign scientists devoted to the research of automatic feeding systems; modeling the operation of a robotic feeder and a mobile feed mixer-distributor using the developed mathematical apparatus based on graph theory; the experiments carried out at Russian farms with functioning automatic feeding systems and at farms that are potential consumers of these technologies. RESULTS:The paper presents the results of statistical processing of information obtained during the review of robotic feeders made by the worlds leading manufacturers. It is noted that the existing AFSs are suitable for relatively small European farms. For Russian farms, capable to contain 800 or more cows, the structure of the AFS with two main configurations is proposed. A description of each of the configurations is given, the schematic implementation plan for one of the configurations is given. CONCLUSIONS:The proposed AFS makes it possible to effectively use robotic feed dispensers with a relatively small amount of required technological equipment. Its efficiency increases with an increase in the number of livestock serviced, especially in farms with combined animal husbandry, as the specific costs of technological equipment per head decrease.