Hongze Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hongze Xu has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Peng Zhou
Beijing Jiaotong University
6 shared publications - Guiyang Sun
Beijing Jiaotong University
3 shared publications - Xiuming Yao
School of Automation and Intelligence, Beijing Jiaotong University, Beijing, China
3 shared publications - Xubin Sun
Beijing Jiaotong University
3 shared publications - Yu Yang
School of Automation and Intelligence, Beijing Jiaotong University, Beijing, China
3 shared publications - Chuyan Deng
CRRC Technology Innovation Beijing Co Ltd
2 shared publications
Latest Publications
- 19 June 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (27)
A Sinusoidal-Phase Positioning Method of Position and Speed Measurement for EDS Maglev Train
The electrodynamic suspension magnetic levitation train (EDS Maglev train) is a high-speed transportation mode with speed up to 600 km/h. In maglev operation, position and speed measurement systems is crucial for ensuring train traction control and automatic operation. A series of position and speed measurement methods have been investigated for rail transportation. However, due to the special structure with no gears and no motor tooth slots with iron cores, it is still a challenging task to realize position and speed measurement for EDS maglev train. In addition, the currently available methods are often costly due to the cable laying along the track. Given these issues, a novel method for measuring position and speed is proposed in this study, which exploits the inherent periodic characteristics of levitation coils already installed along the trackside, thereby eliminating the requirement for additional infrastructure and significantly reducing cost. After calculating finite element model and coil circuit equation, a novel Sinusoidal-Phase Positioning Method is applied to output signal processing. Through concatenating signals from two adjacent coils to form a new cycle and eliminating high-order harmonic through differential coils, position and speed can be estimate reliably. The proposed method has been validated through experimental testing, and the results show that, compared with the traditional speed measurement and positioning methods, this method achieves advantages such as high precision, low cost and adaptability for EDS maglev train, which performs more competitive.
- 19 June 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (27)
A Sinusoidal-Phase Positioning Method of Position and Speed Measurement for EDS Maglev Train
The electrodynamic suspension magnetic levitation train (EDS Maglev train) is a high-speed transportation mode with speed up to 600 km/h. In maglev operation, position and speed measurement systems is crucial for ensuring train traction control and automatic operation. A series of position and speed measurement methods have been investigated for rail transportation. However, due to the special structure with no gears and no motor tooth slots with iron cores, it is still a challenging task to realize position and speed measurement for EDS maglev train. In addition, the currently available methods are often costly due to the cable laying along the track. Given these issues, a novel method for measuring position and speed is proposed in this study, which exploits the inherent periodic characteristics of levitation coils already installed along the trackside, thereby eliminating the requirement for additional infrastructure and significantly reducing cost. After calculating finite element model and coil circuit equation, a novel Sinusoidal-Phase Positioning Method is applied to output signal processing. Through concatenating signals from two adjacent coils to form a new cycle and eliminating high-order harmonic through differential coils, position and speed can be estimate reliably. The proposed method has been validated through experimental testing, and the results show that, compared with the traditional speed measurement and positioning methods, this method achieves advantages such as high precision, low cost and adaptability for EDS maglev train, which performs more competitive.
- 1 May 2026
- Published by Springer Nature
- p. 116-123
Optimization of Energy-Saving Speed Curves for Maglev Trains in Multi-train Coordination Scenarios
- 1 May 2026
- Published by Springer Nature
- p. 116-123
Optimization of Energy-Saving Speed Curves for Maglev Trains in Multi-train Coordination Scenarios
- 1 April 2026
- Published by Springer Nature
- p. 80-87
A Data-Driven Sliding Mode Observer-Enhanced MFAC Method for Stable Levitation Control of Maglev Train Systems
- 1 April 2026
- Published by Springer Nature
- p. 80-87
A Data-Driven Sliding Mode Observer-Enhanced MFAC Method for Stable Levitation Control of Maglev Train Systems
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75, 9533716
A Novel Positioning System for EDS Maglev Trains
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75, 9533716
A Novel Positioning System for EDS Maglev Trains
- Open Access
- 15 October 2025
- Published by MDPI AG in Journal of Imaging
- Vol. 11 (10) , 364
Surgical Instrument Segmentation via Segment-Then-Classify Framework with Instance-Level Spatiotemporal Consistency Modeling
Accurate segmentation of surgical instruments in endoscopic videos is crucial for robot-assisted surgery and intraoperative analysis. This paper presents a Segment-then-Classify framework that decouples mask generation from semantic classification to enhance spatial completeness and temporal stability. First, a Mask2Former-based segmentation backbone generates class-agnostic instance masks and region features. Then, a bounding box-guided instance-level spatiotemporal modeling module fuses geometric priors and temporal consistency through a lightweight transformer encoder. This design improves interpretability and robustness under occlusion and motion blur. Experiments on the EndoVis 2017 and 2018 datasets demonstrate that our framework achieves mIoU improvements of 3.06%, 2.99%, and 1.67% and mcIoU gains of 2.36%, 2.85%, and 6.06%, respectively, over previously state-of-the-art methods, while maintaining computational efficiency.
- 15 October 2025
- Published by MDPI AG in Journal of Imaging
- Vol. 11 (10) , 364
Open AccessSurgical Instrument Segmentation via Segment-Then-Classify Framework with Instance-Level Spatiotemporal Consistency Modeling
Accurate segmentation of surgical instruments in endoscopic videos is crucial for robot-assisted surgery and intraoperative analysis. This paper presents a Segment-then-Classify framework that decouples mask generation from semantic classification to enhance spatial completeness and temporal stability. First, a Mask2Former-based segmentation backbone generates class-agnostic instance masks and region features. Then, a bounding box-guided instance-level spatiotemporal modeling module fuses geometric priors and temporal consistency through a lightweight transformer encoder. This design improves interpretability and robustness under occlusion and motion blur. Experiments on the EndoVis 2017 and 2018 datasets demonstrate that our framework achieves mIoU improvements of 3.06%, 2.99%, and 1.67% and mcIoU gains of 2.36%, 2.85%, and 6.06%, respectively, over previously state-of-the-art methods, while maintaining computational efficiency.
- 8 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 15930-15940
Event-Driven Robust Model Predictive Control for Electromagnetic Levitation Systems With Voltage Fluctuation Constraints
In this article, the levitation control problem of electromagnetic levitation systems subject to track irregularities, air gap and vertical velocity and voltage fluctuation constraints are taken into account. An equivalent tracking model is established, which incorporates the flux density as a state variable to simplified the derivation of the robust constraints. With these robust constraints in place, a novel robust hierarchical control strategy is developed, which combines feedback linearization techniques with event-triggered robust model predictive control (ERMPC). Moreover, the theoretical properties are investigated, including recursive feasibility and closed-loop stability. Finally, to verify the superiority of the proposed control, simulations are conducted and compared with the conventional ERMPC, RMPC algorithms, and the proposed strategy under different parameter environments. The results demonstrate that the proposed algorithm can effectively reduce the frequency of controller updates and improve levitation performance while addressing various constraints, thereby enhancing system stability and safety.
- 8 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 15930-15940
Event-Driven Robust Model Predictive Control for Electromagnetic Levitation Systems With Voltage Fluctuation Constraints
In this article, the levitation control problem of electromagnetic levitation systems subject to track irregularities, air gap and vertical velocity and voltage fluctuation constraints are taken into account. An equivalent tracking model is established, which incorporates the flux density as a state variable to simplified the derivation of the robust constraints. With these robust constraints in place, a novel robust hierarchical control strategy is developed, which combines feedback linearization techniques with event-triggered robust model predictive control (ERMPC). Moreover, the theoretical properties are investigated, including recursive feasibility and closed-loop stability. Finally, to verify the superiority of the proposed control, simulations are conducted and compared with the conventional ERMPC, RMPC algorithms, and the proposed strategy under different parameter environments. The results demonstrate that the proposed algorithm can effectively reduce the frequency of controller updates and improve levitation performance while addressing various constraints, thereby enhancing system stability and safety.
- Open Access
Two-Step Optimization Method of Freight Train Speed Curve Based on Rolling Optimization Algorithm and MPC
Given the considerable length and weight of freight trains, their operation can be quite challenging. Improper operation may lead to train decoupling and derailment. Driver Advisory Systems (DASs) are used in some countries to assist train drivers by providing the speed curves, which are desired to be easy to track. Multi-mass train model is a good choice to depict the in-train forces in train speed curve generating, but its application is often hindered by the computation time. A single mass train model is considered as another choice to simplify the computation. To exploit the advantages of the multi-mass and single-mass models, this paper proposes a Two-step Optimization Method to generate the optimal speed curves for the freight trains. In the first step, the Rolling Optimization Algorithm (ROA) is proposed to optimize the speed curve on the basis of the single-mass model, taking the train energy consumption and punctuality as the optimization objectives. In order to assist the driver in operating the train smoothly, the speed curve generated by the ROA was tested on DAS, but it could not be followed accurately in the actual operation. To solve this problem, a Model Predictive Control (MPC) algorithm based on a multi-mass model is adopted as the second optimization step, which takes the output speed curve of the ROA as the reference speed curve. The MPC algorithm will generate a new speed curve, taking in-train forces, energy consumption and punctuality as the optimization indices. Simulations are carried out using the data from the Dalailong railway in China to evaluate the proposed method. The simulation results show that the speed curves generated by the Two-step Optimization Method are smoother than that of the ROA, and the throttle sequences are more conducive for the driver to follow in practical operation. The simulation results show that the energy consumption is reduced by 17.1% compared to that of the ROA simulation. The speed curve also can be integrated into the onboard DAS or the Automatic Train Operation (ATO) system, aiming to obtain a smooth and energy-efficient train operation.
Open AccessTwo-Step Optimization Method of Freight Train Speed Curve Based on Rolling Optimization Algorithm and MPC
Given the considerable length and weight of freight trains, their operation can be quite challenging. Improper operation may lead to train decoupling and derailment. Driver Advisory Systems (DASs) are used in some countries to assist train drivers by providing the speed curves, which are desired to be easy to track. Multi-mass train model is a good choice to depict the in-train forces in train speed curve generating, but its application is often hindered by the computation time. A single mass train model is considered as another choice to simplify the computation. To exploit the advantages of the multi-mass and single-mass models, this paper proposes a Two-step Optimization Method to generate the optimal speed curves for the freight trains. In the first step, the Rolling Optimization Algorithm (ROA) is proposed to optimize the speed curve on the basis of the single-mass model, taking the train energy consumption and punctuality as the optimization objectives. In order to assist the driver in operating the train smoothly, the speed curve generated by the ROA was tested on DAS, but it could not be followed accurately in the actual operation. To solve this problem, a Model Predictive Control (MPC) algorithm based on a multi-mass model is adopted as the second optimization step, which takes the output speed curve of the ROA as the reference speed curve. The MPC algorithm will generate a new speed curve, taking in-train forces, energy consumption and punctuality as the optimization indices. Simulations are carried out using the data from the Dalailong railway in China to evaluate the proposed method. The simulation results show that the speed curves generated by the Two-step Optimization Method are smoother than that of the ROA, and the throttle sequences are more conducive for the driver to follow in practical operation. The simulation results show that the energy consumption is reduced by 17.1% compared to that of the ROA simulation. The speed curve also can be integrated into the onboard DAS or the Automatic Train Operation (ATO) system, aiming to obtain a smooth and energy-efficient train operation.
- Open Access
- 6 January 2025
- Published by MDPI AG in Preprints.org
Two-step Optimization Method of Freight Train Speed Curve Based on Rolling Optimization Algorithm and MPC
Given the considerable length and weight of freight trains, their operation can be quite challenging. Improper operation may lead to train decoupling and derailment. Driver Advisory Systems (DASs) are used in some countries to assist the train drivers by providing the speed curves, which are desired to be easy to track. Multi-mass train model is a good choice to depict the in-train forces in train speed curve generating, but its application is often hindered by the computation time. Single mass train model is considered as another choice to simplify the computation. To exploit the advantages of the multi-mass and single mass models, this paper proposes a Two-step Optimization Method to generate the optimal speed curves for the freight trains. In the first step, the Rolling Optimization Algorithm (ROA) is proposed to optimize the speed curve on the basis of single mass model, taking the train energy consumption and punctuality as the optimization objectives. In order to assist the driver to operate the train smoothly, the speed curve generated by the ROA was tested on DAS, but it could not be followed accurately in actual operation. To solve this problem, a Model Predictive Control (MPC) algorithm based on multi-mass model is adopted as the second optimization step, which takes the output speed curve of the ROA as the reference speed curve. The MPC algorithm will generate a new speed curve, taking in-train forces, energy consumption and punctuality as the optimization indices. Simulations are carried out using the data of Dalailong railway in China to evaluate the proposed method. The simulation results show that the speed curves generated by Two-step Optimization Method are smoother than that of the ROA, and the throttle sequences are more conducive for the driver to follow in practical operation. The simulation results show that the energy consumption is reduced by 17.1% compared to that of ROA simulation. The speed curve also can be integrated into the onboard DAS or the Automatic Train Operation (ATO) system, aiming to obtain a smooth and energy-efficient train operation.
- 6 January 2025
- Published by MDPI AG in Preprints.org
Open AccessTwo-step Optimization Method of Freight Train Speed Curve Based on Rolling Optimization Algorithm and MPC
Given the considerable length and weight of freight trains, their operation can be quite challenging. Improper operation may lead to train decoupling and derailment. Driver Advisory Systems (DASs) are used in some countries to assist the train drivers by providing the speed curves, which are desired to be easy to track. Multi-mass train model is a good choice to depict the in-train forces in train speed curve generating, but its application is often hindered by the computation time. Single mass train model is considered as another choice to simplify the computation. To exploit the advantages of the multi-mass and single mass models, this paper proposes a Two-step Optimization Method to generate the optimal speed curves for the freight trains. In the first step, the Rolling Optimization Algorithm (ROA) is proposed to optimize the speed curve on the basis of single mass model, taking the train energy consumption and punctuality as the optimization objectives. In order to assist the driver to operate the train smoothly, the speed curve generated by the ROA was tested on DAS, but it could not be followed accurately in actual operation. To solve this problem, a Model Predictive Control (MPC) algorithm based on multi-mass model is adopted as the second optimization step, which takes the output speed curve of the ROA as the reference speed curve. The MPC algorithm will generate a new speed curve, taking in-train forces, energy consumption and punctuality as the optimization indices. Simulations are carried out using the data of Dalailong railway in China to evaluate the proposed method. The simulation results show that the speed curves generated by Two-step Optimization Method are smoother than that of the ROA, and the throttle sequences are more conducive for the driver to follow in practical operation. The simulation results show that the energy consumption is reduced by 17.1% compared to that of ROA simulation. The speed curve also can be integrated into the onboard DAS or the Automatic Train Operation (ATO) system, aiming to obtain a smooth and energy-efficient train operation.
- 15 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 12 (5) , 4315-4324
“E+Ǝ” Cores Magnetic Integrated Transformers for Two-Phase Parallel LLC Resonant Converter
An "E+Ǝ" cores 2-phase magnetic integrated transformers’ structure is presented. The transformers’ core is assembled with two pieces of "E" core of shorted central legs and one piece of "+" core. The 2-phase windings are wound on the upper and lower legs of the "+" core respectively. The manufactured windings are put around the upper and lower legs of the "+" core very easily. The flux excited by each phase’s windings is separated as two smaller parts, they pass through the two "E" cores respectively, which lead to smaller air gap and air gap fringing flux. The windings do not surround the air gaps, the air gap fringing flux does not cause or cause less eddy current loss in windings. The "E+Ǝ" transformers’ magnetic circuit model is established, their parameters are designed, and the losses are calculated. The proposed "E+Ǝ" transformers are verified with simulation and system experiment. Compared with traditional double "EƎ" transformers, the "E+Ǝ" transformers’ secondary winding length and corresponding copper loss will increase a little, but their core volume and core loss will decrease more. When 2-phase parallel LLC resonant converter adopts the "E+Ǝ" transformers, its efficiency will increase compared with adopting double "EƎ" transformers.
- 15 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 12 (5) , 4315-4324
“E+Ǝ” Cores Magnetic Integrated Transformers for Two-Phase Parallel LLC Resonant Converter
An "E+Ǝ" cores 2-phase magnetic integrated transformers’ structure is presented. The transformers’ core is assembled with two pieces of "E" core of shorted central legs and one piece of "+" core. The 2-phase windings are wound on the upper and lower legs of the "+" core respectively. The manufactured windings are put around the upper and lower legs of the "+" core very easily. The flux excited by each phase’s windings is separated as two smaller parts, they pass through the two "E" cores respectively, which lead to smaller air gap and air gap fringing flux. The windings do not surround the air gaps, the air gap fringing flux does not cause or cause less eddy current loss in windings. The "E+Ǝ" transformers’ magnetic circuit model is established, their parameters are designed, and the losses are calculated. The proposed "E+Ǝ" transformers are verified with simulation and system experiment. Compared with traditional double "EƎ" transformers, the "E+Ǝ" transformers’ secondary winding length and corresponding copper loss will increase a little, but their core volume and core loss will decrease more. When 2-phase parallel LLC resonant converter adopts the "E+Ǝ" transformers, its efficiency will increase compared with adopting double "EƎ" transformers.
- 1 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cybernetics
- Vol. 54 (6) , 3540-3552
Disturbance Rejection Event-Triggered Robust Model Predictive Control for Tracking of Constrained Uncertain Robotic Manipulators
A novel hierarchical control framework combining computed-torque-like control (CTLC) with disturbance-observer-based event-triggered robust model predictive control (DO-ET-RMPC) is proposed for the trajectory tracking control of robotic manipulators with bounded disturbances and state and control input constraints. The CTLC approach is first used to cancel the exact nonlinear dynamics of the original tracking error system to obtain a set of decoupling linear tracking error subsystems, thus reducing the optimization complexity of model predictive control (MPC). The composite DO-ET-RMPC scheme is then developed based on the so-called dual-mode MPC approach to robustly stabilize the tracking error subsystems, which could improve the robustness of MPC and save its computational resources simultaneously. The continuous-time theoretical properties of the DO-ET-RMPC scheme, considering disturbances and state and control input constraints simultaneously, are provided for the first time, including the avoidance of Zeno behavior, robust constraint satisfaction, recursive feasibility, and stability. In the end, the superiorities of the proposed control scheme are verified by the comparative simulations.
- 1 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cybernetics
- Vol. 54 (6) , 3540-3552
Disturbance Rejection Event-Triggered Robust Model Predictive Control for Tracking of Constrained Uncertain Robotic Manipulators
A novel hierarchical control framework combining computed-torque-like control (CTLC) with disturbance-observer-based event-triggered robust model predictive control (DO-ET-RMPC) is proposed for the trajectory tracking control of robotic manipulators with bounded disturbances and state and control input constraints. The CTLC approach is first used to cancel the exact nonlinear dynamics of the original tracking error system to obtain a set of decoupling linear tracking error subsystems, thus reducing the optimization complexity of model predictive control (MPC). The composite DO-ET-RMPC scheme is then developed based on the so-called dual-mode MPC approach to robustly stabilize the tracking error subsystems, which could improve the robustness of MPC and save its computational resources simultaneously. The continuous-time theoretical properties of the DO-ET-RMPC scheme, considering disturbances and state and control input constraints simultaneously, are provided for the first time, including the avoidance of Zeno behavior, robust constraint satisfaction, recursive feasibility, and stability. In the end, the superiorities of the proposed control scheme are verified by the comparative simulations.