Lorenza Bovio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lorenza Bovio has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Enrico Borgogno-Mondino
University of Turin
3 shared publications - Piero Boccardo
Politecnico of Turin
3 shared publications - Andrea Ajmar
Interuniversity Department of Regional and Urban Studies and Planning, Politecnico and Università di Torino, Torino, Italy
2 shared publications Danijel Schorlemmer
Helmholtz Centre Potsdam, GFZGerman Research Centre for Geosciences, Potsdam, Germany
2 shared publicationsFrancesco Immordino
2 shared publications- Jan Martinovič
IT4Innovations, VŠB - Technical University of Ostrava, Ostrava, Czech Republic
2 shared publications
Latest Publications
- Open Access
Geometric and Photogrammetric Assessment of Stratospheric Platform for Precision Agriculture Monitoring: A Multi-Campaign Analysis
Remote sensing is widely recognized as a key technology across a wide range of technical and scientific domains, especially in agriculture. Although satellite data have long supported crop monitoring, their limitations in spatial resolution, revisit frequency and cloud coverage have often constrained their applications. High-resolution satellites, available from the beginning of the 2000s, have improved performance, particularly in the field of precision agriculture, but they remain expensive and inflexible. Unmanned Aerial Vehicles perform better in precision agriculture, offering flexibility and high levels of detail; however, their limited operational areas and short endurance flight times constrain their effectiveness. In this evolving landscape, High Altitude Pseudo Satellites (HAPSs), particularly high-altitude balloons, are emerging as a promising new technology that could fill the gaps between satellite and drone remote sensing. These platforms provide large area coverage with high-resolution imagery and long endurance flights at low operational expenses and ease of deployment. This study investigates the operational characteristics, strengths, and geometric limitations of data acquired by the CubeHAPS® platform, a high-altitude pseudo-satellite system, as a prerequisite for its application in precision agriculture. Focusing on experimental campaigns conducted in northern Italy in summer 2024 and 2025, the research characterizes platform stability, image block consistency, and photogrammetric quality through internal metrics. The results demonstrate measurable improvements between the two campaigns, attributed to the introduction of a stabilization system in 2025 and establishing the conditions under which the platform can support reliable photogrammetric reconstruction.
Open AccessGeometric and Photogrammetric Assessment of Stratospheric Platform for Precision Agriculture Monitoring: A Multi-Campaign Analysis
Remote sensing is widely recognized as a key technology across a wide range of technical and scientific domains, especially in agriculture. Although satellite data have long supported crop monitoring, their limitations in spatial resolution, revisit frequency and cloud coverage have often constrained their applications. High-resolution satellites, available from the beginning of the 2000s, have improved performance, particularly in the field of precision agriculture, but they remain expensive and inflexible. Unmanned Aerial Vehicles perform better in precision agriculture, offering flexibility and high levels of detail; however, their limited operational areas and short endurance flight times constrain their effectiveness. In this evolving landscape, High Altitude Pseudo Satellites (HAPSs), particularly high-altitude balloons, are emerging as a promising new technology that could fill the gaps between satellite and drone remote sensing. These platforms provide large area coverage with high-resolution imagery and long endurance flights at low operational expenses and ease of deployment. This study investigates the operational characteristics, strengths, and geometric limitations of data acquired by the CubeHAPS® platform, a high-altitude pseudo-satellite system, as a prerequisite for its application in precision agriculture. Focusing on experimental campaigns conducted in northern Italy in summer 2024 and 2025, the research characterizes platform stability, image block consistency, and photogrammetric quality through internal metrics. The results demonstrate measurable improvements between the two campaigns, attributed to the introduction of a stabilization system in 2025 and establishing the conditions under which the platform can support reliable photogrammetric reconstruction.
- 27 September 2025
- Published by Springer Nature
- p. 161-178
Testing the Potentialities of Stratospheric Platforms in Agriculture: Preliminary Results for Modeling Field Irrigation Flow
- 27 September 2025
- Published by Springer Nature
- p. 161-178
Testing the Potentialities of Stratospheric Platforms in Agriculture: Preliminary Results for Modeling Field Irrigation Flow
- 12 June 2025
- Published by SAGE Publications in The International Journal of High Performance Computing Applications
- Vol. 39 (5) , 655-677
Modeling and implementing an earthquake and tsunami event-triggered, time-constrained impact assessment workflow
Disaster warning and emergency response are an emerging field of HPC/cloud computing which is now known as urgent computing . This means that computing is required to be performed within short time scales. In this regard, the timeliness for early warning of the population is the foremost important point well before accuracy, as long as the predictions are sufficiently accurate, hence a coarser level of precision is acceptable to that end. It also processes a large amount of data and provides well-targeted, high-resolution, and highly reliable information to emergency management stakeholders. At an early stage, it is also important to take into account the uncertainties surrounding the disaster parameters. To do this, the simulation process must include a range of possible values for each of the main input parameters. Following this principle, we hereby present an impact assessment workflow that is designed to provide building-specific damage assessments caused by earthquakes and possible subsequent tsunamis. We target short run-times to guarantee that results are provided as needed for emergency response decisions and that a proper impact assessment is provided, allowing for meaningful planning of rescue actions. We show the design principles coming from a time-aware model of computation, to the specification of the workflow, and the individual programs that compose it. A working prototype was developed as part of the LEXIS project. This paper also includes preliminary experiments toward robust urgent computing, utilizing distributed, heterogeneous HPC and cloud infrastructures.
- 12 June 2025
- Published by SAGE Publications in The International Journal of High Performance Computing Applications
- Vol. 39 (5) , 655-677
Modeling and implementing an earthquake and tsunami event-triggered, time-constrained impact assessment workflow
Disaster warning and emergency response are an emerging field of HPC/cloud computing which is now known as urgent computing . This means that computing is required to be performed within short time scales. In this regard, the timeliness for early warning of the population is the foremost important point well before accuracy, as long as the predictions are sufficiently accurate, hence a coarser level of precision is acceptable to that end. It also processes a large amount of data and provides well-targeted, high-resolution, and highly reliable information to emergency management stakeholders. At an early stage, it is also important to take into account the uncertainties surrounding the disaster parameters. To do this, the simulation process must include a range of possible values for each of the main input parameters. Following this principle, we hereby present an impact assessment workflow that is designed to provide building-specific damage assessments caused by earthquakes and possible subsequent tsunamis. We target short run-times to guarantee that results are provided as needed for emergency response decisions and that a proper impact assessment is provided, allowing for meaningful planning of rescue actions. We show the design principles coming from a time-aware model of computation, to the specification of the workflow, and the individual programs that compose it. A working prototype was developed as part of the LEXIS project. This paper also includes preliminary experiments toward robust urgent computing, utilizing distributed, heterogeneous HPC and cloud infrastructures.
- Open Access
- 30 May 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (11) , 2844
Towards a Digital Twin Prototype of Alpine Glaciers: Proposal for a Possible Theoretical Framework
The Destination Earth (DestinE) European initiative has recently brought into the scientific community the concept of the Digital Twin (DT) applied to Earth Sciences. Within 2030, a very high precision digital model of the Earth, continuously fed and powered by Earth Observation (EO) data, will provide as many digital replicas (DTs) as the different domains of the earth sciences are. Considering that a DT is driven by use cases, depending on the selected application, the provided information has to change. It follows that, to achieve a reliable representation of the selected use case, a reasonable and complete a priori definition of the needed elements that DT must contain is mandatory. In this work, we define a possible theoretical framework for a future DT of the Italian Alpine glaciers, trying to define and describe all those information (both EO and in situ data) and relationships that necessarily have to enter the process as building blocks of the DT itself. Two main aspects of glaciers were considered and investigated: (i) the “metric quantification” of their spatial dynamics (achieved through measures) and (ii) the “qualitative (semantic) description” of their health status as definable through observations from domain experts. After the first identification of the building blocks, the work proceeds focusing on existing EO data sources providing their essential elements, with specific focus on open access high-resolution (HR) and very-high-resolution (VHR) images. This last issue considered two scales of analysis: local (single glacier) and regional (Italian Alps). Some considerations were furtherly reported about the expected glaciers-related applications enabled by the availability of a DT at regional level. Applications involving both metric and semantic information were considered and grouped in three main clusters: Glaciers Evolution Modelling (GEM), 4D Multi Reality, and Virtual Reality. Limitations were additionally explored, mainly related to the technical characteristics of available EO VHR open data and some conclusions provided.
- 30 May 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (11) , 2844
Open AccessTowards a Digital Twin Prototype of Alpine Glaciers: Proposal for a Possible Theoretical Framework
The Destination Earth (DestinE) European initiative has recently brought into the scientific community the concept of the Digital Twin (DT) applied to Earth Sciences. Within 2030, a very high precision digital model of the Earth, continuously fed and powered by Earth Observation (EO) data, will provide as many digital replicas (DTs) as the different domains of the earth sciences are. Considering that a DT is driven by use cases, depending on the selected application, the provided information has to change. It follows that, to achieve a reliable representation of the selected use case, a reasonable and complete a priori definition of the needed elements that DT must contain is mandatory. In this work, we define a possible theoretical framework for a future DT of the Italian Alpine glaciers, trying to define and describe all those information (both EO and in situ data) and relationships that necessarily have to enter the process as building blocks of the DT itself. Two main aspects of glaciers were considered and investigated: (i) the “metric quantification” of their spatial dynamics (achieved through measures) and (ii) the “qualitative (semantic) description” of their health status as definable through observations from domain experts. After the first identification of the building blocks, the work proceeds focusing on existing EO data sources providing their essential elements, with specific focus on open access high-resolution (HR) and very-high-resolution (VHR) images. This last issue considered two scales of analysis: local (single glacier) and regional (Italian Alps). Some considerations were furtherly reported about the expected glaciers-related applications enabled by the availability of a DT at regional level. Applications involving both metric and semantic information were considered and grouped in three main clusters: Glaciers Evolution Modelling (GEM), 4D Multi Reality, and Virtual Reality. Limitations were additionally explored, mainly related to the technical characteristics of available EO VHR open data and some conclusions provided.
- 4 January 2022
- Published by Taylor & Francis
- p. 131-145
Event-Driven, Time-Constrained Workflows
Handling disaster response with simulations and data can bring an early knowledge of critical situations, allowing better early awareness and decisions. This, however, requires the combination of multiple domain elements and technologies to allow for such a system to operate according to constraints, in particular those of time. This chapter describes how a pilot for tsunami and earthquake was composed out of different simulations and data sources to build the situation knowledge needed at various time scales, and the various technologies that the heterogeneous system deployed and used to orchestrate the workflow, to ensure data access, to deploy tasks over the infrastructure, and to ensure reliability, precision, and performance.
- 4 January 2022
- Published by Taylor & Francis
- p. 131-145
Event-Driven, Time-Constrained Workflows
Handling disaster response with simulations and data can bring an early knowledge of critical situations, allowing better early awareness and decisions. This, however, requires the combination of multiple domain elements and technologies to allow for such a system to operate according to constraints, in particular those of time. This chapter describes how a pilot for tsunami and earthquake was composed out of different simulations and data sources to build the situation knowledge needed at various time scales, and the various technologies that the heterogeneous system deployed and used to orchestrate the workflow, to ensure data access, to deploy tasks over the infrastructure, and to ensure reliability, precision, and performance.
- 1 January 2022
- Published by Springer Nature
- p. 95-105
The WRF-ERDS Workflow in the November 2020 Calabria Flood Event
- 1 January 2022
- Published by Springer Nature
- p. 95-105
The WRF-ERDS Workflow in the November 2020 Calabria Flood Event
- Open Access
- 30 June 2010
- Published by Associazione Italiana di Telerilevamento in Italian Journal of Remote Sensing
- p. 55-74
A novel approach (the CRATER method) for assessing tsunami vulnerability at the regional scale using ASTER imagery
We present here a novel method to assess coastal vulnerability to tsunami based on GIS (Geographical Information System), ASTER imagery (Advanced Spaceborn Thermal Emission and Reflection Radiometer) and SRTM-3 elevation model (Shuttle Radar Topography Mission-3). We developed this method within the CRATER project (Coastal Risk Analysis for Tsunamis and Environmental Remediation) and applied it on the whole western coast of Thailand. As result, we generated a set of vectorial vulnerability maps with a geometrical resolution of 90m (scale 1:450 000). This approach provides a low-cost and quick tool to analyse extended coastal tracts, and prioritize investments for prevention measures or for further high-resolution analysis
- 30 June 2010
- Published by Associazione Italiana di Telerilevamento in Italian Journal of Remote Sensing
- p. 55-74
Open AccessA novel approach (the CRATER method) for assessing tsunami vulnerability at the regional scale using ASTER imagery
We present here a novel method to assess coastal vulnerability to tsunami based on GIS (Geographical Information System), ASTER imagery (Advanced Spaceborn Thermal Emission and Reflection Radiometer) and SRTM-3 elevation model (Shuttle Radar Topography Mission-3). We developed this method within the CRATER project (Coastal Risk Analysis for Tsunamis and Environmental Remediation) and applied it on the whole western coast of Thailand. As result, we generated a set of vectorial vulnerability maps with a geometrical resolution of 90m (scale 1:450 000). This approach provides a low-cost and quick tool to analyse extended coastal tracts, and prioritize investments for prevention measures or for further high-resolution analysis
- 17 September 2009
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7478, 74780
Applications of Terra MODIS data for Iraq marshland monitoring
Since the 1970s, the Iraq Marshlands have been damaged significantly, but recently (May 2003-March 2004), more than 20% of the original marshland area has been re-flooded. The goal of the work is to observe the evolution of the marshes in terms of extension and to evaluate the success of wetland restoration on the base of multispectral and multitemporal MODIS images collected in 2007-2008. MODIS (MODerate resolution Imaging Spectroradiometer) has a viewing swath width of 2,330 km and views the entire surface of the Earth every one to two days. Its detectors measure 36 spectral bands between 0.405 and 14.385 μm, and it acquires data at three spatial resolutions -- 250m, 500m, and 1,000m. These data with their low spatial resolution but high time frequency are suitable for regional-scale time-series studies. The satellite data have been corrected for atmospheric effects using an IDL (Interactive Data Language) procedure based on MODTRAN and 6S radiative transfer codes. These radiative transfer codes require, in input, atmospheric vertical profiles, aerosol optical thickness(AOT) and columnar water vapour content (WV). Vertical profiles are obtained from the nearest meteorological station or by climatological data set. AOT and WV are retrieved either from the MODIS MODATML2 atmospheric product, or from the AERONET (Aerosol robotic network). Then different classifications (Pixel- and Object-Oriented) have been tested, compared and discussed to evaluate the best approach to apply on regional-scale time-series studies.© (2009) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.
- 17 September 2009
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7478, 74780
Applications of Terra MODIS data for Iraq marshland monitoring
Since the 1970s, the Iraq Marshlands have been damaged significantly, but recently (May 2003-March 2004), more than 20% of the original marshland area has been re-flooded. The goal of the work is to observe the evolution of the marshes in terms of extension and to evaluate the success of wetland restoration on the base of multispectral and multitemporal MODIS images collected in 2007-2008. MODIS (MODerate resolution Imaging Spectroradiometer) has a viewing swath width of 2,330 km and views the entire surface of the Earth every one to two days. Its detectors measure 36 spectral bands between 0.405 and 14.385 μm, and it acquires data at three spatial resolutions -- 250m, 500m, and 1,000m. These data with their low spatial resolution but high time frequency are suitable for regional-scale time-series studies. The satellite data have been corrected for atmospheric effects using an IDL (Interactive Data Language) procedure based on MODTRAN and 6S radiative transfer codes. These radiative transfer codes require, in input, atmospheric vertical profiles, aerosol optical thickness(AOT) and columnar water vapour content (WV). Vertical profiles are obtained from the nearest meteorological station or by climatological data set. AOT and WV are retrieved either from the MODIS MODATML2 atmospheric product, or from the AERONET (Aerosol robotic network). Then different classifications (Pixel- and Object-Oriented) have been tested, compared and discussed to evaluate the best approach to apply on regional-scale time-series studies.© (2009) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.