LLLei Liu

Lei Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lei Liu has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Retracted

    Retraction: “Numerical study on energy criterion and damage evolution of abrasive jet rock breaking under biaxial stresses” [Phys. Fluids 37(7), 073303 (2025)]

    by Jinkui Ma, Lei Liu, Zuoquan Li, Xiaomin Guo, Huaiguang Guo, Fuchao Tian, Jie Li, Weiwei Su, Peng Jin

  • Retracted

    RETRACTED: Numerical study on energy criterion and damage evolution of abrasive jet rock breaking under biaxial stresses

    by Jinkui Ma, Lei Liu, Zuoquan Li, Xiaomin Guo, Huaiguang Guo, Fuchao Tian, Jie Li, Weiwei Su, Peng Jin

    Abrasive water jet technology, a novel and efficient method for rock breaking, has demonstrated significant potential in deep engineering applications. To improve efficiency under confining pressure, this study proposes an energy criterion for rock breaking based on the energy distribution theory of abrasive water jets and the unified energy yield theory of rocks. The impact of stress states on rock-breaking performance is also explored. Experimental investigations under biaxial confining pressure analyzed the effects of lithology, rock strength, and confining pressure on critical pressure. Results showed that as confining pressure increased from 0 to 20 MPa, critical pressure rose by 166.4%. The average error between theoretical and experimental values decreased from 21.61% to 15.83%. This energy criterion provides a more accurate prediction of rock-breaking performance under confining pressure. A significant linear relationship between rock strength and critical pressure was observed, with different lithologies exhibiting distinct rock-breaking behaviors. Numerical simulations using the smoothed particle hydrodynamics–finite element method coupling algorithm revealed that rock breaking is predominantly driven by stress waves. At high confining pressures (35 MPa), the volume of damage cracks was 2.14 times larger than under zero stress, confirming the effectiveness of efficient rock breaking through the combined action of jet and stress. This study enhances the theoretical framework of abrasive water jet rock breaking and offers practical guidance for efficient, safe rock breaking in deep engineering applications. The authors are retracting this article due to a significant error in formula (30) identified upon further review after publication. This article is being retracted effective October 17, 2025.


  • Damage characteristics of shale with different bedding inclinations under high-pressure water jet impact after thermal treatment

    by Zhaolong Ge, Yuhuai Cui, Qinglin Deng, Jianming Shangguan, Zhi Yao, Zhongtan Li, Lei Liu, Binbin Ge

    Water jet-assisted rock breaking is a conventional method for shale gas extraction. However, the complex conditions of deep shale reservoirs, including elevated temperatures and intricate stratification, obscure the rock-breaking mechanisms of jets. Therefore, this study conducted high-pressure water jet impact experiments on shale with five bedding angles (0°, 30°, 45°, 60°, and 90°) and four temperatures (room temperature, 100, 150, and 200 °C). Computed tomography (CT) and three-dimensional reconstruction techniques were used to analyze the damage characteristics. Results indicate that increased temperature significantly enhances rock-breaking efficiency. The crack volume fraction at 200 °C increased by 146.44 times compared to 25 °C. The new crack area exhibited a sharp increase from 100 to 150 °C compared to the slow increase rate before and after this temperature range, indicating the presence of a threshold temperature for effective fragmentation by jet impact. Damage showed significant anisotropy, with crack depth increasing with bedding angle and a through crack emerged at 90°, while the new crack area peaked at 45°. The jet rock-breaking efficiency index (JREI) was introduced which integrates crack volume, area, and depth to characterize the fragmentation efficiency at different temperatures and bedding conditions. These findings could provide a theoretical basis for enhancing the fragmentation of deep shale.


  • Predicting the depth of rock cutting by abrasive water jet using support vector machine optimized with whale optimization algorithm

    by Zhongtan Li, Zhaolong Ge, Qinglin Deng, Zhe Zhou, Chun Zhu, Lei Liu, Zhi Yao

    The utilization of abrasive water jet (AWJ) has garnered notable attention in subsurface engineering, as well as unconventional natural gas development, geothermal energy extraction, and tunnel excavation. The efficiency of construction operations is contingent upon rock fragmentation, which is controlled by AWJ parameters and rock properties. Currently, the parameter settings for rock fragmentation by AWJ predominantly rely on empirical approaches, and existing prediction models have large errors due to a limited number of training samples. In this study, we propose a combined support vector machine (SVM) and whale optimization algorithm (WOA) model. To test the model's predictive performance for rock-breaking depth, a database consisting of eight input parameters is constructed. These parameters include AWJ pressure, target distance, lateral velocity, abrasive types, mass flow rate, abrasive particle size, rock types, and rock uniaxial compressive strength. Additionally, to demonstrate the superiority of the WOA-SVM model, three other predictive models based on the back propagation (BP) network, SVM, and Random Forest (RF) are established, compared, and evaluated. The results show that the optimized WOA-SVM model is the most accurate in predicting rock cutting depth, achieving a precision rate of 0.972 25 compared to other models (BP: 0.9536; RF: 0.9681; SVM: 0.9687). Furthermore, sensitivity analysis highlights that lateral velocity exhibits the highest impact on the model, followed by jet pressure and the uniaxial compressive strength of rock. This underscores the critical importance of prioritizing the adjustment of lateral velocity, AWJ pressure, and rock properties when engaging in rock-cutting operations.


  • Open Access

    Determining the pore structure and fluid characteristics of different ranks of coal using nuclear magnetic resonance

    by Lei Liu, Zhe Zhou, Zhaolong Ge, Zhongtan Li, Jianming Shangguan

    The microstructure of coal reservoirs and their fluid-endowment characteristics are important indicators for evaluating coalbed methane during mining. This study aimed to investigate the influence mechanism of the nanopore structure of different coal ranks on the fluid distribution characteristics. Low-field nuclear magnetic resonance (NMR), centrifugal force, and heat treatment tests were conducted. The results indicated that as the degree of coal metamorphism increases, micro-transition pores increase significantly, mesopores–macropores decrease, and the nonhomogeneity of the pores increases. The optimum centrifugal forces for low-, middle-, and high-rank coals were 1.68, 1.08, and 1.08 MPa, respectively. The corresponding mean T2C1 (first T2 cutoff) values were measured as 8.01, 1.61, and 5.09 ms, respectively, while the mean T2C2 (second T2 cutoff) values were 0.23, 0.26, and 1.25 ms, respectively. Pore sizes less than 11.6 nm indicate unrecoverable fluid, those higher than 88 nm indicate free fluid, and the rest (11.6–88 nm) indicate capillary bound fluid. As the degree of coal metamorphism increases, free fluid saturation decreases, capillary bound fluid saturation increases and then decreases, and unrecoverable fluid saturation increases.


  • Development and testing of a wireless smart toolholder with multi-sensor fusion

    by Jin Zhang, Xinzhen Kang, Zhengmao Ye, Lei Liu, Guibao Tao, Huajun Cao


  • Study on ignition and combustion of plasma jet in aeroengine combustor

    by Lei Liu, Lantao He, Tianyu Wang, Weizhuo Hua

    In order to investigate the influence of plasma combustion on the performance of aeroengine combustor, a local geometric model of the two-head sector section of the short combustor was established. The steady-state numerical calculation of the kerosene in the combustor was carried out under the conventional mechanism and the specific operating condition under the plasma mechanism. The numerical calculation results of the combustor with or without the plasma mechanism were compared and analyzed. The results show that the average temperature, flow field velocity, density and turbulent kinetic energy behind the cyclone in the two-head fan section of the combustion chamber are better than those under the conventional mechanism, which indicates that the application of plasma mechanism can significantly improve the combustion performance of the combustion chamber to a certain extent. Under the chemical proper ratio, the average temperature of the outlet section of the combustion chamber increases from 1910 K to 2050 K, and the combustion efficiency increases from 82.4% to 90.1% by 7.7%, indicating that the addition of plasma mechanism can deepen the chemical reaction degree of kerosene and release more heat to improve the combustion efficiency of kerosene.

  • Nuclear magnetic resonance study on the law of methane adsorption in water-bearing medium rank lump coal

    by Lei Liu, Ming Yang, Zixin Cao, Xuebo Zhang

    To reveal the influence of water on the gas adsorption process of medium rank lump coals, four groups of medium rank coals were selected for the study, and pore analysis experiments and low-field nuclear magnetic resonance (NMR) isothermal adsorption experiments with different water contents were carried out. The microscopic pore structure characteristics of medium rank lump coals were characterized by the combined mercury-pressure method and nitrogen adsorption method; the gas adsorption process of water-bearing coal samples was quantitatively analyzed based on the NMR isothermal adsorption experimental platform, and the influence of the water endowment state on the gas content of lump coal reservoirs was discussed. The results show that medium grade coals are predominantly microporous and small pore, followed by mesoporous, with the least macrospores, and have good gas storage capacity and that the adsorption capacity increases with the degree of metamorphism. With the increase of adsorption time, the gas adsorption of the aqueous coal samples showed a trend of first increasing and then remaining constant, reaching the adsorption equilibrium within 9 h. The adsorption saturation, adsorption increment, and adsorption gas content all increased with the increase of metamorphism, while the non-adsorbed gas content decreased for the same moisture content coal sample. The saturation, increment, adsorption, and non-adsorption gas content decreased with increasing water content for the same coal sample.


  • Open Access

    A discrete-module-finite-element hydroelasticity method in analyzing dynamic response of floating flexible structures

    by Yongqiang Chen, Xiantao Zhang, Lei Liu, Xinliang Tian, Xin Li, Zhengshun Cheng

    A discrete-module-finite element (DMFE) based hydroelasticity method has been proposed and well developed. Firstly, a freely floating flexible structure is discretized into several macro-submodules in two horizontal directions to perform a multi-rigid-body hydrodynamic analysis. Each macro-submodule is then abstracted to a lumped mass at the center of gravity that bears the external forces including inertia force, hydrodynamic force and hydrostatic force. Apart from external forces, all lumped masses are also subjected to structural forces that reflect the structural deformation features of the original flexible structure. The key to calculating the structural forces is derivation of the equivalent overall structural stiffness matrix with respect to the displacements of all lumped masses, which is tackled following the finite element procedure. More specifically, each macro-submodule is discretized into a number of microelements to derive the corresponding structural stiffness matrix, which is manipulated to a new one including only the nodes at the position of the lumped masses and surrounding boundaries by using the substructure approach, and subsequently the target overall stiffness matrix is obtained by combining together all macro-submodules. Finally, based on equivalence between external and structural forces, the DMFE method establishes the hydroelastic equation on all lumped masses with their displacements as unknown variables. Solving the equation gives the displacement response of all lumped masses. Displacement and structural force responses are first calculated on the interfaces of every two adjacent macro-submodules, after which at any given position of the flexible structure, the recovery of displacement is based on the structural stiffness matrix of the corresponding macro-submodule and the recovery of structural force uses the spline interpolation scheme.