AJAuzani Jidin

Auzani Jidin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Auzani Jidin has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparative review on control strategies for doubly fed induction generator-based wind energy harnessing system

    by Preethicaa Ramesh, Sowmmiya Uthayakumar, Tole Sutikno, Vigna Kumaran Ramachandaramurthy, Mochammad Facta, Auzani Jidin

    Doubly fed induction generator (DFIG)-based variable-speed wind energy harvesting systems (WEHS) are widely employed owing to high efficiency and reliable grid integration under variable wind conditions. This paper presents a comprehensive review of conventional, intelligent, and hybrid control strategies for DFIG-based WEHS. Unlike previous studies that primarily focus on specific control techniques, this study systematically compares different approaches based on key performance indicators-dynamic response, total harmonic distortion (THD), robustness, and fault ride-through (FRT) capability. Conventional controllers such as proportional–integral (PI) control, field-oriented control (FOC), and direct torque control (DTC) are evaluated alongside intelligent techniques, including fuzzy logic control (FLC), artificial neural networks (ANNs), adaptive control, and optimization techniques. The comparison shows that intelligent and hybrid control strategies achieve superior dynamic response, lower THD, enhanced robustness, and improved FRT capability, although they require higher computational resources. Furthermore, this review highlights critical research challenges, including the lack of experimental validation, the absence of standardized benchmarking frameworks, and the complexity of real-time implementation in high-power WEHS. Finally, future research should focus on developing hybrid intelligent controllers, establishing evaluation methodologies, and integrating advanced control strategies with smart grid technologies to improve power quality, voltage regulation, and reliability of modern wind energy systems.

  • Open Access

    Power electronics for hybrid battery–supercapacitor PV storage systems: state-of-the-art converter topologies and future trends

    by Tole Sutikno, Hendril Satrian Purnama, Auzani Jidin

    The rapid expansion of photovoltaic (PV) generation has intensified the need for energy storage systems capable of mitigating intermittency, voltage fluctuations, and dynamic load variations. While lithium-ion batteries (LIBs) provide high energy density and mature deployment pathways, their lifetime is significantly affected by frequent high-power transients and ripple currents under variable PV conditions. Hybrid energy storage systems (HESS) that combine batteries with supercapacitors (SCs) exploit complementary characteristics, high energy density from batteries and high-power density from SCs used to improve dynamic performance and extend lifespan. In many systems, power electronics serve as the critical enabling interface for bidirectional energy flow, voltage regulation, and power decoupling. This paper presents a comprehensive, converter-centric review of power electronic topologies for PV-based battery–SC HESS, systematically classifying passive, active, cascaded, isolated, non-isolated, dual-active-bridge, and multiport architectures. Their performance is compared and evaluated in terms of efficiency, voltage gain, power density, controllability, scalability, and impact on battery stress, with reported prototypes achieving peak efficiencies in the 95–98% range. Emerging trends, including wide-bandgap (WBG) semiconductor adoption, soft-switching operation, modular multiport integration, and predictive data-driven control, are identified as key enablers for next-generation high-efficiency and reliability-optimized PV–HESS systems.

  • Open Access

    Nearest level control for improving total harmonic distortion in a 13-level three-phase multilevel inverter

    by Showkot Hossain, Akib Hasan, Nurul Ain Mohd Said, Wahidah Abd Halim, Auzani Jidin

    This research investigates the application of nearest level control (NLC) in a three-phase transistor-clamped H-bridge (TCHB) multilevel inverter (MLI) to enhance power quality and reduce harmonic distortion. The TCHB topology offers high perfor-mance with fewer components compared to traditional MLI configurations, making it par-ticularly suitable for renewable energy applications. By operating at fundamental switching frequency, the NLC technique effectively minimizes switching losses while reducing total harmonic distortion (THD). The study includes MATLAB/Simulink-based simulation modeling and experimental validation using dSPACE, tested under varying load conditions. For a 13-level TCHB inverter with equal DC supplies and a modulation index of M = 1, the voltage THD was 5.22% (resistive load) and 5.17% (inductive-resistive load) in simula-tions, which was further reduced to 4.5% and 4.2% in experiments. The NLC technique demonstrated superior harmonic performance and efficiency compared to conventional methods, particularly at higher voltage levels. This study highlights the practical advantages of the TCHB inverter, including reduced component count, simplified control implementa-tion, and enhanced output waveform quality. These findings confirm the potential of the NLC-based TCHB inverter for high-performance motor drives and grid-tied renewable en-ergy systems, positioning it as a promising solution for modern power electronics applica-tions.


  • Open Access

    Analysis of VFDPC for three-level neutral point clamped AC-DC converters with capacitor balancing s

    by Azziddin Mohamad Razali, Nor Azizah Mohd Yusoff, Syahar Azalia Ab Shukor, Muhammad Hafeez Mohamed Hariri, Auzani Jidin, Tole Sutikno

    This paper presents an analysis of the dynamic performance of a three-level neutral point clamped (NPC) AC-DC converter utilizing the advanced control technique of virtual flux direct power control (VFDPC). VFDPC estimates the three-phase grid voltage and instantaneous active and reactive power components, eliminating the need for an AC input voltage sensor used in conventional direct power control (DPC). This reduction in sensors decreases system complexity and cost while mitigating high-frequency noise and interference. Integrating VFDPC into 3L NPC AC-DC converters significantly enhances overall performance, leading to more efficient and robust power conversion systems. However, a significant challenge in the three-level NPC topology is the voltage imbalance in the neutral point of the DC-link capacitor, which can cause excessive voltage stress on switching devices and degrade system performance. To address this, a novel lookup table has been developed, incorporating strategies to balance the capacitor voltage. The results of this study demonstrate that VFDPC generates nearly sinusoidal line currents with reduced current total harmonic distortion (THD). Additionally, VFDPC ensures unity, lagging, and leading power factor operation, while providing flexibility to adjust the DC-link output voltage and accommodate load variations. These capabilities highlight VFDPC effectiveness in managing power quality and system stability, even under varying load conditions.

  • Open Access

    Optimizing low-speed DTC performance for three-phase induction motors with sector rotation strategy

    by Nurul Syahada Muhamad Sabri, Siti Azura Ahmad Tarusan, Syed Abrar S. A. Zawawi, Auzani Jidin, Tole Sutikno

    This paper proposes a modification to the direct torque control (DTC) strategy for induction motors, focusing on improving flux performance at lower speeds. The method employs a sector rotation strategy to address stator flux droop, which occurs in conventional DTC due to the impact of stator resistance at low speed becoming more significant. This constrains the ability of the flux vector to be tangential to the voltage vector in the default sector. Consequently, an improper flux locus leads to distortion of the phase currents which disrupts precise control of torque. The proposed approach dynamically adjusts the sector angle to mitigate flux droop while maintaining the simplicity and original structure of DTC. The new sector rotation strategy is validated through simulations in MATLAB/Simulink to demonstrate the effectiveness of the proposed method in reducing stator flux droop. These findings have potential applications in the industrial sector and electric vehicles, where stable motor operation and smoother driving performance at low speeds are crucial for precise control operation.


  • Open Access

    Enhanced torque control in high-speed DTC using modified stator flux locus

    by Syed Abrar S. A. Zawawi, Auzani Jidin, Nurul Syahada Muhamad Sabri, Siti Azura A. Tarusan, Tole Sutikno

    This paper proposes a modification of stator flux locus in direct torque control (DTC) of induction machine, aiming to enhance torque capability during steady-state operation at high speeds. The modified flux locus maintains the simplicity of the original DTC structure and its advantages of rapid torque and flux dynamic control. However, DTC faces challenges in controlling motor torque at high-speed operations. This study addresses the limitation of the traditional circular flux locus, which limits the angular frequency of stator flux to increase further and hence causes control of torque deteriorates at high speeds. By modifying the stator flux locus from a circular to a hexagonal shape by adjusting flux hysteresis band, this can improve torque control during high-speed motor operation. This finding has potential applications in industrial and electric vehicle sectors that demand enhanced torque control for high-speed motor operations.

  • Open Access

    Analysis of interior rotor for high-speed brushless DC motor using finite element method

    by Nurfaezah Abdullah, Kasrul Abdul Karim, Raja Nor Firdaus Raja Othman, Auzani Jidin, Tole Sutikno

    The permanent magnet of brushless DC (BLDC) motor is ideally suited for high-speed application due to its superior performance and efficient as compared to other types of electrical motors. However, to operate in high-speed operation, the rotors that hold the magnet must be able to withstand high centrifugal force. Due to that, the main objective of this project is to design and develop the suitable rotor for high-speed BLDC motor through the finite element method (FEM) Ansys Maxwell modeling software. In addition, this project is also carried out to determine the ability of the modeled software to reach the high-speed performances in terms of cogging torque and induce voltage. In this project, the selected BLDC motor was fabricated and measured experimentally. The result showed that the designed rotor can achieve speed of almost 14,500 rpm.


  • Open Access

    Evaluation of CHB MLI based shunt APF using low pass filter and self-tuning filter

    by Musa Yusup Lada, Mohd Amran Mohd Radzi, Jasronita Jasni, Hashim Hizam, Auzani Jidin, Syahrul Hisham Mohamad

    The increasing demand for high-rating power supply in the distribution system causes the conventional inverter topology, six step voltage source inverter (SSVSI) unsuitable for being applied as active power filter (APF). Multilevel inverter (MLI) is generally the best suitable inverter for APF, but not all types of MLI can be used for high-voltage applications. Among the MLIs topology, cascaded H-bridge (CHB) is the best choice since it can produce output voltage more than twice the amount of DC source. Moreover, CHB MLI topology uses fewer power devices and is simple in design. Low pass filter (LPF) is a common method used for harmonic extraction in this controller. However, this method faces various problems, such as an additional need for phase lock loop (PLL) algorithm and slow transient and steady-state responses. Therefore, self-tuning filter (STF) is introduced as a new filtering method to overcome this problem. This paper evaluates CHB MLI's performance for APF using STF as a harmonic extraction. The model was developed and verified in MATLAB/Simulink. The results show that harmonic extraction using STF performs better total harmonic distortion (THD) than conventional LPF. Nevertheless, both algorithms produce THD below 5%, defined as the permissible value stated in IEEE 519.


  • Open Access

    Investigation on various stator structure towards noise and vibration

    by Nurfaezah Abdullah, Kasrul Abdul Karim, Raja Nor Firdaus Raja Othman, Auzani Jidin, Tole Sutikno

    This research analyses the noise and vibration characteristics of permanent magnet motors (PMM) with the electromagnetic characteristics, with an emphasis on high-speed motor segmented closed slot stator. The interaction between the stator, rotor, and magnets can cause a vibration that results in the loud sound due to the high magnetic energy. Even if there aren't many vibrations to contend with, the fluctuation of motor vibrations causes more serious harm. The studies covered slotted stator, closed slot stator, and segmented with closed slot stator. The objective is to analyze the cogging torque relation towards vibration and the effect of natural frequency at steady-state behavior of the structure. ANSYS finite element analysis (FEA) is used to generate electromagnetic analysis performance whilst ANSYS mechanical used to simulate the modal and harmonic analysis at the stator tooth tips surface to define the structure when the steady-state condition under vibrational stimulation. Anticipation on this work shows, the lowest cogging torque produce less radiated sound. Thus, the result indicates the cogging torque profiles had good agreement with the equivalent radiated power level (ERPL) waterfall diagram.

  • Open Access

    The simulation analysis of stator flux droop minimization in direct torque control open-end winding induction machine

    by Muhammad Zaid Aihsan, Auzani Jidin, Siti Azura Ahmad Tarusan, Tole Sutikno

    Direct torque control (DTC) using dual-inverter technique is one of the best topologies for electric vehicle (EV) as it offers abundant selection of voltage vectors to drive the induction machine (IM). This dual-inverter technique also more reassuring as the system still workable even any of its voltage supply is disrupted or the power pack is drained. However, during the uneven voltage supply, the movement of voltage vectors is interrupted and will move obliquely especially in medium voltage vectors. This situation will lead to the faulty movement of the voltage vectors in the default sector definitions and lead to huge flux droop, which later could impose to distort phase current. This paper proposes an optimal sector definition based on the preset voltage ratio between the two inverters. The voltage vectors can be mapped tangentially to the flux vector, minimizing the flux droop and improving the phase current waveform when the proposed sector is utilized. The effectiveness of the proposed sector is tested using MATLAB/Simulink software and the exact parameter from the induction machine.