Azrita Alias
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Azrita Alias has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Jurifa Mat Lazi
Universiti Teknikal Malaysia Melaka
4 shared publications - Hairul Nizam Talib
Universiti Teknikal Malaysia Melaka
2 shared publications - Mohammed Azlan Hussain
Sustainable Process Engineering Centre (SPEC), Department of Chemical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur 50603, Malaysia
2 shared publications - Mohd Ruzaini Hashim
Universiti Teknikal Malaysia Melaka
2 shared publications - Muhammad Zaid Aihsan
University Malaysia Perlis (UniMAP)
2 shared publications - Ahmad Shukri Abu Hasim
Faculty of Engineering, Universiti Pertahanan Nasional Malaysia, Kuala Lumpur, Malaysia
1 shared publication
Latest Publications
- Open Access
- 1 September 2026
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 17 (3) , 1688-1701
Performance index for optimization method based on PMSM drives using ABC and PSO
The permanent magnet synchronous motor (PMSM) is commonly used in industrial and home appliances for its high efficiency and dynamic performance. In this research, a PMSM drive based on field-oriented control (FOC) is designed and simulated using MATLAB/Simulink. The speed controller of the drive is tuned using the trial-and-error method. However, the method requires more time for testing and adjustment of the speed controller to generate an optimal output response. Thus, particle swarm optimization (PSO) and artificial bee colony (ABC) algorithms, which require less computational effort and effectively produce good responses, are used to optimize the speed controller of the drive. PSO and ABC also offer an attractive optimization framework because of their independent, agnostic model structures, global searching capability, and low-load real-time calculation. In this study, the results obtained from different tuning methods are compared to determine the best optimization method of the speed controller in the PMSM drive under different operations. Other than that, performance measures such as integral square error (ISE), integral absolute error (IAE), and integral time absolute error (ITAE), which are commonly used to measure the effectiveness of a controller, are also discussed. The results show that the PMSM drive based on the ITAE criterion using the ABC algorithm gives better performance under different conditions.
- 1 September 2026
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 17 (3) , 1688-1701
Open AccessPerformance index for optimization method based on PMSM drives using ABC and PSO
The permanent magnet synchronous motor (PMSM) is commonly used in industrial and home appliances for its high efficiency and dynamic performance. In this research, a PMSM drive based on field-oriented control (FOC) is designed and simulated using MATLAB/Simulink. The speed controller of the drive is tuned using the trial-and-error method. However, the method requires more time for testing and adjustment of the speed controller to generate an optimal output response. Thus, particle swarm optimization (PSO) and artificial bee colony (ABC) algorithms, which require less computational effort and effectively produce good responses, are used to optimize the speed controller of the drive. PSO and ABC also offer an attractive optimization framework because of their independent, agnostic model structures, global searching capability, and low-load real-time calculation. In this study, the results obtained from different tuning methods are compared to determine the best optimization method of the speed controller in the PMSM drive under different operations. Other than that, performance measures such as integral square error (ISE), integral absolute error (IAE), and integral time absolute error (ITAE), which are commonly used to measure the effectiveness of a controller, are also discussed. The results show that the PMSM drive based on the ITAE criterion using the ABC algorithm gives better performance under different conditions.
- Open Access
- 1 September 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 16 (3) , 1740-1751
Analysis of cascaded H-Bridge multilevel inverters using SPWM with multi-sinusoidal reference
Multilevel inverters have become the preferred choice for medium voltage and high-power applications due to their superior waveform quality, reduced stress on switching components, and overall enhanced performance. Among these, the cascaded H-bridge inverter stands out for its simpler control and modulation techniques, as well as its greater efficiency compared to other multilevel inverter topologies. This paper presents the design and performance evaluation of a cascaded H-bridge multilevel inverter (CHMI) for five, seven, nine, eleven, thirteen, and fifteen levels, utilizing sinusoidal pulse width modulation (SPWM) in MATLAB Simulink. The proposed technique, the multi-sinusoidal reference, is implemented by comparing multiple sinusoidal wave signals with a carrier triangular signal, with the resulting comparison pulses used to control the inverter's switching. The output results indicate that as the number of levels in multilevel inverters increases, the total harmonic distortion (THD) decreases, and the output voltage improves.
- 1 September 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 16 (3) , 1740-1751
Open AccessAnalysis of cascaded H-Bridge multilevel inverters using SPWM with multi-sinusoidal reference
Multilevel inverters have become the preferred choice for medium voltage and high-power applications due to their superior waveform quality, reduced stress on switching components, and overall enhanced performance. Among these, the cascaded H-bridge inverter stands out for its simpler control and modulation techniques, as well as its greater efficiency compared to other multilevel inverter topologies. This paper presents the design and performance evaluation of a cascaded H-bridge multilevel inverter (CHMI) for five, seven, nine, eleven, thirteen, and fifteen levels, utilizing sinusoidal pulse width modulation (SPWM) in MATLAB Simulink. The proposed technique, the multi-sinusoidal reference, is implemented by comparing multiple sinusoidal wave signals with a carrier triangular signal, with the resulting comparison pulses used to control the inverter's switching. The output results indicate that as the number of levels in multilevel inverters increases, the total harmonic distortion (THD) decreases, and the output voltage improves.
- Open Access
- 1 June 2025
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 38 (3) , 1440-1449
Speed drives control using particle swarm optimization for PMSM drives
The paper presents a contemporary method for controlling the speed of a permanent magnet synchronous machine (PMSM) by optimizing the parameters of a proportional-integral (PI) controller using the particle swarm optimization (PSO) algorithm. This approach aims to enhance the robustness and dynamic performance of the drive system, resulting in improved accuracy and sensitivity to load changes and wide range of speed. The study evaluates two tuning techniques for the PI controller, which are the traditional trial-and-error method and the PSO optimization method. The performance of the PMSM is assessed based on speed response performance, including rise time, overshoot, and settling time. The PSOtuned controller significantly minimizes overshoot compared to the trialand-error method. And also achieves a shorter settling time, indicating a more stable response. However, the rise time is slightly longer with the PSO-tuned controller compared to the conventional tuning method just for the medium speed. For the rated speed, PSO still having shorter rise time compared to trial-and-error PI method. These findings imply that while the PSO method may result in a longer rise time, its overall advantages in reducing overshoot and settling time make it a more effective option for speed control in PMSMs. This is consistent with other research suggesting that PSO can outperform traditional methods in optimizing control parameters across various applications.
- 1 June 2025
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 38 (3) , 1440-1449
Open AccessSpeed drives control using particle swarm optimization for PMSM drives
The paper presents a contemporary method for controlling the speed of a permanent magnet synchronous machine (PMSM) by optimizing the parameters of a proportional-integral (PI) controller using the particle swarm optimization (PSO) algorithm. This approach aims to enhance the robustness and dynamic performance of the drive system, resulting in improved accuracy and sensitivity to load changes and wide range of speed. The study evaluates two tuning techniques for the PI controller, which are the traditional trial-and-error method and the PSO optimization method. The performance of the PMSM is assessed based on speed response performance, including rise time, overshoot, and settling time. The PSOtuned controller significantly minimizes overshoot compared to the trialand-error method. And also achieves a shorter settling time, indicating a more stable response. However, the rise time is slightly longer with the PSO-tuned controller compared to the conventional tuning method just for the medium speed. For the rated speed, PSO still having shorter rise time compared to trial-and-error PI method. These findings imply that while the PSO method may result in a longer rise time, its overall advantages in reducing overshoot and settling time make it a more effective option for speed control in PMSMs. This is consistent with other research suggesting that PSO can outperform traditional methods in optimizing control parameters across various applications.
- Open Access
- 1 September 2023
- Published by Institute of Advanced Engineering and Science in International Journal of Evaluation and Research in Education (IJERE)
- Vol. 12 (3) , 1550-1559
Individual student key performance using mobile web apps based on knowledge profile and cumulative grade point average
This study investigated the performance of individual students toward the knowledge profile and cumulative grade point average or known as CGPA. The proposal of this paper involves two major components. The first component is investigating the individual student performance based on the knowledge profile and CGPA. The performance of students from cohort 2017 for the program Bachelor of Electrical Engineering (BEKG) courses in the Faculty of Electrical Engineering, Universiti Teknikal Malaysia Melaka (UTeM) was used as the dataset. The case study separates into various groups (excellent, honors and pass). Secondly, the study proposed a responsive web application leveraging a Google Visualization Feature to self-check individual academic performance. The goal of this app is to assist users in evaluating individual student performance and assist management in planning for continual quality improvement using the web and mobile apps. The marketing segments include students, academics, university, and school administration for analysis and evaluate the individual student’s performance.
- 1 September 2023
- Published by Institute of Advanced Engineering and Science in International Journal of Evaluation and Research in Education (IJERE)
- Vol. 12 (3) , 1550-1559
Open AccessIndividual student key performance using mobile web apps based on knowledge profile and cumulative grade point average
This study investigated the performance of individual students toward the knowledge profile and cumulative grade point average or known as CGPA. The proposal of this paper involves two major components. The first component is investigating the individual student performance based on the knowledge profile and CGPA. The performance of students from cohort 2017 for the program Bachelor of Electrical Engineering (BEKG) courses in the Faculty of Electrical Engineering, Universiti Teknikal Malaysia Melaka (UTeM) was used as the dataset. The case study separates into various groups (excellent, honors and pass). Secondly, the study proposed a responsive web application leveraging a Google Visualization Feature to self-check individual academic performance. The goal of this app is to assist users in evaluating individual student performance and assist management in planning for continual quality improvement using the web and mobile apps. The marketing segments include students, academics, university, and school administration for analysis and evaluate the individual student’s performance.
- Open Access
- 1 June 2023
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 14 (2) , 1270-1279
A simple duty cycle control technique to minimize torque ripple in open-end winding induction motor
Modern electric vehicles (EVs) that drive an induction motor (IM) fed by a traction inverter are fast gaining popularity due to their simple configuration and robustness. The direct torque control (DTC) technique is one of the best control methods to drive the IM, especially in open-end winding configurations, as it offers more voltage vectors. However, the existence of hysteresis controllers and improper switching technique causes larger torque ripples that leads to variable switching frequency. The study will be focused on the open-end winding induction motor where the direct current (DC) power is fed from both sides of the stator windings using the dual inverter configuration. To minimize the torque ripples, a simple switching technique using the duty cycle control method is proposed by injecting a high-frequency square wave into the default inverter switching status to form the new pattern of voltage vectors. The effectiveness of the proposed technique is tested through MATLAB/Simulink software and validated experimentally with a lab-scale setup using a dSPACE controller. The findings show that the proposed method reduces torque ripple by over 50% while keeping the DTC's simple structure.
- 1 June 2023
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 14 (2) , 1270-1279
Open AccessA simple duty cycle control technique to minimize torque ripple in open-end winding induction motor
Modern electric vehicles (EVs) that drive an induction motor (IM) fed by a traction inverter are fast gaining popularity due to their simple configuration and robustness. The direct torque control (DTC) technique is one of the best control methods to drive the IM, especially in open-end winding configurations, as it offers more voltage vectors. However, the existence of hysteresis controllers and improper switching technique causes larger torque ripples that leads to variable switching frequency. The study will be focused on the open-end winding induction motor where the direct current (DC) power is fed from both sides of the stator windings using the dual inverter configuration. To minimize the torque ripples, a simple switching technique using the duty cycle control method is proposed by injecting a high-frequency square wave into the default inverter switching status to form the new pattern of voltage vectors. The effectiveness of the proposed technique is tested through MATLAB/Simulink software and validated experimentally with a lab-scale setup using a dSPACE controller. The findings show that the proposed method reduces torque ripple by over 50% while keeping the DTC's simple structure.
- Open Access
- 1 December 2020
- Published by Universitas Ahmad Dahlan in TELKOMNIKA (Telecommunication Computing Electronics and Control)
- Vol. 18 (6) , 3315-3323
High frequency signal injection method for sensorless permanent magnet synchronous motor drives
The objective of this project is to design a high frequency signal injection method for sensorless control of permanent magnet synchronous motor (PMSM) drives. Generally, the PMSM drives control requires the appearance of speed and positon sensor to measure the motor speed hence to feedback the information for variable speed drives operation. The usage of the sensor will increase the size, cost, extra hardwire and feedback devices. Therefore, there is motivation to eliminate this type of sensor by injecting high frequency signal and utilizing the electrical parameter from the motor so that the speed and positon of rotor can be estimated. The proposed position and speed sensorless control method using high frequency signal injection together with all the power electronic circuit are modelled using Simulink. PMSM sensorless driveis simulated and the results are analyzed in terms of speed, torque and stator current response without load disturbance but under the specification of varying speed, forward to reverse operation, reverse to forward operation and step change in reference speed. The results show that the signal injection method performs well during start-up and low speed operation.
- 1 December 2020
- Published by Universitas Ahmad Dahlan in TELKOMNIKA (Telecommunication Computing Electronics and Control)
- Vol. 18 (6) , 3315-3323
Open AccessHigh frequency signal injection method for sensorless permanent magnet synchronous motor drives
The objective of this project is to design a high frequency signal injection method for sensorless control of permanent magnet synchronous motor (PMSM) drives. Generally, the PMSM drives control requires the appearance of speed and positon sensor to measure the motor speed hence to feedback the information for variable speed drives operation. The usage of the sensor will increase the size, cost, extra hardwire and feedback devices. Therefore, there is motivation to eliminate this type of sensor by injecting high frequency signal and utilizing the electrical parameter from the motor so that the speed and positon of rotor can be estimated. The proposed position and speed sensorless control method using high frequency signal injection together with all the power electronic circuit are modelled using Simulink. PMSM sensorless driveis simulated and the results are analyzed in terms of speed, torque and stator current response without load disturbance but under the specification of varying speed, forward to reverse operation, reverse to forward operation and step change in reference speed. The results show that the signal injection method performs well during start-up and low speed operation.
- 11 October 2014
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 39 (11) , 8001-8013
DSP-Based Modified SPWM Switching Technique with Two-Degrees-of-Freedom Voltage Control for Three-Phase AC–DC Buck Converter
- 11 October 2014
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 39 (11) , 8001-8013
DSP-Based Modified SPWM Switching Technique with Two-Degrees-of-Freedom Voltage Control for Three-Phase AC–DC Buck Converter
- 20 September 2013
- Published by The Korean Institute of Power Electronics in Journal of Power Electronics
- Vol. 13 (5) , 829-840
A Single-Input Single-Output Approach by using Minor-Loop Voltage Feedback Compensation with Modified SPWM Technique for Three-Phase AC-DC Buck Converter
- 20 September 2013
- Published by The Korean Institute of Power Electronics in Journal of Power Electronics
- Vol. 13 (5) , 829-840
A Single-Input Single-Output Approach by using Minor-Loop Voltage Feedback Compensation with Modified SPWM Technique for Three-Phase AC-DC Buck Converter