Mohamed Habbab
Mohamed Habbab has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Abdeldjebar Hazzab
Tahri Mohamed University
5 shared publications - Alhachemi Moulay Abdellah
Tahri Mohamed University
3 shared publications - Ambrish Chandra
University of Quebec Montreal
3 shared publications - Hicham Gouabi
Tahri Mohamed University
3 shared publications - Ahmed Khalil Moussaoui
Tahri Mohamed University
2 shared publications - Hireche Slimane
Tahri Mohamed University
2 shared publications
Latest Publications
- Open Access
- 1 March 2026
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 17 (1) , 765-776
Application of machine learning for production optimization and predictive maintenance in an iron processing plant
The modern metallurgical industry requires advanced solutions for process optimization, cost reduction, and predictive maintenance. This paper proposes a unified simulation-based framework using machine learning (ML) to jointly address production optimization and maintenance prediction in a virtual iron processing environment. Several ML models, including random forest (RF), extreme gradient boosting (XGBoost), light gradient boosting machine (LightGBM), support vector machine (SVM), and k-nearest neighbors (k-NN), were evaluated on synthetic datasets representing production, maintenance, and transport processes. A reproducible methodology was adopted, including preprocessing, time-aware data splitting, and cross-validation to prevent information leakage. Model performance was assessed using F1-score, area under the receiver operating characteristic curve (AUC), and regression metrics. Tree-based models achieved near-perfect classification performance (AUC ≈ 1, precision and recall > 0.99), while light gradient boosting machine (LightGBM) and CatBoost provided the best regression accuracy. Feature importance analysis using SHapley Additive exPlanations (SHAP) identified vibration and temperature as key maintenance indicators. Although based on simulation, the framework is designed for integration with supervisory control and data acquisition (SCADA) and the Industrial Internet of Things (IIoT), supporting real-time industrial deployment and alignment with operational key performance indicators.
- 1 March 2026
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 17 (1) , 765-776
Open AccessApplication of machine learning for production optimization and predictive maintenance in an iron processing plant
The modern metallurgical industry requires advanced solutions for process optimization, cost reduction, and predictive maintenance. This paper proposes a unified simulation-based framework using machine learning (ML) to jointly address production optimization and maintenance prediction in a virtual iron processing environment. Several ML models, including random forest (RF), extreme gradient boosting (XGBoost), light gradient boosting machine (LightGBM), support vector machine (SVM), and k-nearest neighbors (k-NN), were evaluated on synthetic datasets representing production, maintenance, and transport processes. A reproducible methodology was adopted, including preprocessing, time-aware data splitting, and cross-validation to prevent information leakage. Model performance was assessed using F1-score, area under the receiver operating characteristic curve (AUC), and regression metrics. Tree-based models achieved near-perfect classification performance (AUC ≈ 1, precision and recall > 0.99), while light gradient boosting machine (LightGBM) and CatBoost provided the best regression accuracy. Feature importance analysis using SHapley Additive exPlanations (SHAP) identified vibration and temperature as key maintenance indicators. Although based on simulation, the framework is designed for integration with supervisory control and data acquisition (SCADA) and the Industrial Internet of Things (IIoT), supporting real-time industrial deployment and alignment with operational key performance indicators.
- 1 January 2026
- Published by GN1 Sistemas e Publicacoes Ltd. in ITEGAM-Journal of Engineering and Technology for Industrial Applications (ITEGAM-JETIA)
- Vol. 12 (59) , 1553-1560
Improved MPPT for PV Systems Combining Thevenin Equivalents with Simple Neural Networks
Efficient MPPT (Maximum Power Point Tracking) algorithms are required for PV (Photovoltaic) systems in order to obtain maximum power under temperature and sun irradiation variations. Single-diode models are complex and computationally intensive, while traditional methods, such as the perturbation and observation (P&O) method with oscillatory behavior and slow convergence. This study offers a simplified hybrid system that combines an integrated artificial neural network (ANN) controller with a Thevenin equivalent circuit description of the PV modules. While the NN forecasts the ideal operating cycle of the step-up transformer using only G and T inputs, the Thevenin technique reduces nonlinear current-voltage curves to and parameters at the maximum power point. Comprehensive validation using MATLAB/Simulink demonstrates a steady-state efficiency of 98.2%, 30% faster tracking than the P&O method, and robust partial shading recovery using only 800 training samples for application-ready performance.
- 1 January 2026
- Published by GN1 Sistemas e Publicacoes Ltd. in ITEGAM-Journal of Engineering and Technology for Industrial Applications (ITEGAM-JETIA)
- Vol. 12 (59) , 1553-1560
Improved MPPT for PV Systems Combining Thevenin Equivalents with Simple Neural Networks
Efficient MPPT (Maximum Power Point Tracking) algorithms are required for PV (Photovoltaic) systems in order to obtain maximum power under temperature and sun irradiation variations. Single-diode models are complex and computationally intensive, while traditional methods, such as the perturbation and observation (P&O) method with oscillatory behavior and slow convergence. This study offers a simplified hybrid system that combines an integrated artificial neural network (ANN) controller with a Thevenin equivalent circuit description of the PV modules. While the NN forecasts the ideal operating cycle of the step-up transformer using only G and T inputs, the Thevenin technique reduces nonlinear current-voltage curves to and parameters at the maximum power point. Comprehensive validation using MATLAB/Simulink demonstrates a steady-state efficiency of 98.2%, 30% faster tracking than the P&O method, and robust partial shading recovery using only 800 training samples for application-ready performance.
- Open Access
- 1 December 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 15 (4) , 2700-2708
Fault diagnosis decentralized of manufacturing systems using Boolean models
This paper introduces an approach decentralized to fault detection and isolation (FDI) in manufacturing systems using a Boolean discrete event model. The method incorporates diverse information sources to create distinct models for plant systems and control. The objective is to enhance the understanding of process operations by employing various representation tools tailored to each information source. It is to reduce the number of explosion problems combinatorial and detect faults in the shortest possible time. This comprehensive representation facilitates the fulfillment of three crucial diagnosis functions: detection, localization, and identification. The approach involves Boolean modeling of each process actuator along with its corresponding sensors, a temporal model based on fuzzy expectations of event occurrences, and a set of if...then rules. The goal of this decentralized approach minimize both the complexity and the manual construction effort required for the model. The paper demonstrates the effectiveness of this approach through an illustrative example involving manufacturing systems.
- 1 December 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 15 (4) , 2700-2708
Open AccessFault diagnosis decentralized of manufacturing systems using Boolean models
This paper introduces an approach decentralized to fault detection and isolation (FDI) in manufacturing systems using a Boolean discrete event model. The method incorporates diverse information sources to create distinct models for plant systems and control. The objective is to enhance the understanding of process operations by employing various representation tools tailored to each information source. It is to reduce the number of explosion problems combinatorial and detect faults in the shortest possible time. This comprehensive representation facilitates the fulfillment of three crucial diagnosis functions: detection, localization, and identification. The approach involves Boolean modeling of each process actuator along with its corresponding sensors, a temporal model based on fuzzy expectations of event occurrences, and a set of if...then rules. The goal of this decentralized approach minimize both the complexity and the manual construction effort required for the model. The paper demonstrates the effectiveness of this approach through an illustrative example involving manufacturing systems.
- Open Access
- 1 September 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 15 (3) , 1426-1434
Experimental study of PID for attitude control of a quadcopter using an ESP32
Aerial robotics encompasses intricate kinematics and dynamics that govern the flight of quad-rotor systems. Among the various methods employed for flight control using microcontrollers like the ESP32 developed by ESPRESSIF; the proportional integral derivative (PID) controller stands out as a widely adopted approach. The ESP32 microcontroller offers a superior interface, delivering enhanced performance and response time, particularly in dynamic environments. This article delves into the implementation and viability of the ESP32 platform for communication with MATLAB/Simulink, as well as real-time data acquisition to control the attitude of quadcopter withe chassis F450. The PID controller was designed to specifically work with the ESP32 platform and rigorously tested on an actual quadcopter during flight operations. lastly, a comprehensive analysis of the data gained and empirical results from the physical model demonstrates that the proposed framework is effective.
- 1 September 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 15 (3) , 1426-1434
Open AccessExperimental study of PID for attitude control of a quadcopter using an ESP32
Aerial robotics encompasses intricate kinematics and dynamics that govern the flight of quad-rotor systems. Among the various methods employed for flight control using microcontrollers like the ESP32 developed by ESPRESSIF; the proportional integral derivative (PID) controller stands out as a widely adopted approach. The ESP32 microcontroller offers a superior interface, delivering enhanced performance and response time, particularly in dynamic environments. This article delves into the implementation and viability of the ESP32 platform for communication with MATLAB/Simulink, as well as real-time data acquisition to control the attitude of quadcopter withe chassis F450. The PID controller was designed to specifically work with the ESP32 platform and rigorously tested on an actual quadcopter during flight operations. lastly, a comprehensive analysis of the data gained and empirical results from the physical model demonstrates that the proposed framework is effective.
- Open Access
- 1 June 2023
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 14 (2) , 1085-1097
Novel strategy for fault e-diagnosis of wind energy conversion systems using wavelet analysis based on Rt-Lab and Arduino
The diagnosis of wind energy conversion systems (WECS) turns out to be necessary because of their relatively high cost of operation and maintenance. Wind turbines are hard-to-access structures, and they are often located in remote areas. Therefore, a remote diagnosis (e-diagnosis) is required. This paper proposes an alternative approach for the e-diagnosis of a WECS based on the discrete wavelet transform (DWT) and frequency analysis of the aero generator stator currents. To validate this approach, real-time hardware in the loop (HIL) is used to simulate in real-time the mathematical model of the induction generator on the OPAL-RT OP5600 platform to generate the stator currents and the rotor speed. The DWT is applied to the current signal, to generate the DWT signal, which has a huge number of points that are not supported for direct transmission by the Arduino Mega RobotDyn because of its limited sample time. The absolute values of the DWT peak points (MDWT) are sent as point’s packages form to the diagnosis station via the ESP8266 integrated Wi-Fi board of the Arduino Mega RobotDyn to monitor the SCIG states and determine the number of broken bars.
- 1 June 2023
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 14 (2) , 1085-1097
Open AccessNovel strategy for fault e-diagnosis of wind energy conversion systems using wavelet analysis based on Rt-Lab and Arduino
The diagnosis of wind energy conversion systems (WECS) turns out to be necessary because of their relatively high cost of operation and maintenance. Wind turbines are hard-to-access structures, and they are often located in remote areas. Therefore, a remote diagnosis (e-diagnosis) is required. This paper proposes an alternative approach for the e-diagnosis of a WECS based on the discrete wavelet transform (DWT) and frequency analysis of the aero generator stator currents. To validate this approach, real-time hardware in the loop (HIL) is used to simulate in real-time the mathematical model of the induction generator on the OPAL-RT OP5600 platform to generate the stator currents and the rotor speed. The DWT is applied to the current signal, to generate the DWT signal, which has a huge number of points that are not supported for direct transmission by the Arduino Mega RobotDyn because of its limited sample time. The absolute values of the DWT peak points (MDWT) are sent as point’s packages form to the diagnosis station via the ESP8266 integrated Wi-Fi board of the Arduino Mega RobotDyn to monitor the SCIG states and determine the number of broken bars.
- Open Access
- 1 September 2019
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 10 (3) , 1148-1156
Reduced-order observer for real-time implementation speed sensorless control of induction using RT-LAB software
In this paper, Reduced-Order Observer For Real-Time Implementation Speed Sensorless Control of Induction Using RT-LAB Softwareis presented. Speed estimation is performed through a reduced-order observer. The stability of the proposed observer is proved based on Lyapunov’s theorem. The model is initially built offline using Matlab/Simulink and implemented in real-time environment using RT-LAB package and an OP5600 digital simulator. RT-LAB configuration has two main subsystems master and console subsystems. These two subsystems were coordinated to achieve the real-time simulation. In order to verify the feasibility and effectiveness of proposed method, experimental results are presented over a wide speed range, including zero speed.
- 1 September 2019
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 10 (3) , 1148-1156
Open AccessReduced-order observer for real-time implementation speed sensorless control of induction using RT-LAB software
In this paper, Reduced-Order Observer For Real-Time Implementation Speed Sensorless Control of Induction Using RT-LAB Softwareis presented. Speed estimation is performed through a reduced-order observer. The stability of the proposed observer is proved based on Lyapunov’s theorem. The model is initially built offline using Matlab/Simulink and implemented in real-time environment using RT-LAB package and an OP5600 digital simulator. RT-LAB configuration has two main subsystems master and console subsystems. These two subsystems were coordinated to achieve the real-time simulation. In order to verify the feasibility and effectiveness of proposed method, experimental results are presented over a wide speed range, including zero speed.