Olcay Gürabi Aydoğan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Olcay Gürabi Aydoğan has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Nilufer Ozyurt
Department of Civil Engineering, Bogazici University, Bebek, Istanbul, Turkey
7 shared publications - Gözdem Dittel
RWTH Aachen University
2 shared publications Nilüfer Özyurt
2 shared publications- Senem Bilici
Akçansa Çimento Sanayi ve Ticaret A.Ş
2 shared publications - Shantanu Bhat
RWTH Aachen University
2 shared publications - Thomas Gries
Institut für Textiltechnik, RWTH Aachen University, 52074 Aachen, Germany
2 shared publications
Latest Publications
- Open Access
Valorization of Construction and Demolition Wastes and Industrial By-Products in Sustainable Concrete: Comparative Mechanical Performance of Slag Slurry-Treated Recycled Aggregate Concretes
This study investigates the valorization of construction and demolition (C&D) waste streams and an industrial by-product for sustainable concrete production. Recycled concrete aggregates (RCA) and recycled brick aggregates (RBA), derived from C&D wastes, together with pelletized recycled fly ash aggregates (FAA) produced from thermal power plant fly ash, were used as total replacements for natural coarse aggregates. Six concrete mixtures were prepared at a constant water-to-cement ratio of 0.50 using untreated and slag slurry–treated aggregates. A slag slurry-based two-stage mixing approach (TSMA), incorporating ground granulated blast furnace slag (GGBFS), was applied as a practical and potentially scalable treatment method to enhance aggregate quality and interfacial bonding. The results show that complete replacement of natural aggregates reduced fresh concrete unit weight by up to 17%, while meeting the minimum compressive strength requirements for structural applications. Slag slurry treatment led to statistically significant improvements in mechanical properties, reduced variability, and enhanced overall reliability. In addition, widely used code-based prediction models (TS500, ACI, Eurocode-2, NZS 3101-1:2006, and CSA A23.3-04), originally developed for conventional concrete, were evaluated for their applicability in estimating key mechanical properties of recycled and by-product aggregate concretes, and alternative regression-based models were developed to improve prediction accuracy. Overall, the findings demonstrate the potential for effective utilization of C&D wastes and industrial by-products in structural concrete, contributing to resource efficiency and reduced reliance on natural aggregates.
Open AccessValorization of Construction and Demolition Wastes and Industrial By-Products in Sustainable Concrete: Comparative Mechanical Performance of Slag Slurry-Treated Recycled Aggregate Concretes
This study investigates the valorization of construction and demolition (C&D) waste streams and an industrial by-product for sustainable concrete production. Recycled concrete aggregates (RCA) and recycled brick aggregates (RBA), derived from C&D wastes, together with pelletized recycled fly ash aggregates (FAA) produced from thermal power plant fly ash, were used as total replacements for natural coarse aggregates. Six concrete mixtures were prepared at a constant water-to-cement ratio of 0.50 using untreated and slag slurry–treated aggregates. A slag slurry-based two-stage mixing approach (TSMA), incorporating ground granulated blast furnace slag (GGBFS), was applied as a practical and potentially scalable treatment method to enhance aggregate quality and interfacial bonding. The results show that complete replacement of natural aggregates reduced fresh concrete unit weight by up to 17%, while meeting the minimum compressive strength requirements for structural applications. Slag slurry treatment led to statistically significant improvements in mechanical properties, reduced variability, and enhanced overall reliability. In addition, widely used code-based prediction models (TS500, ACI, Eurocode-2, NZS 3101-1:2006, and CSA A23.3-04), originally developed for conventional concrete, were evaluated for their applicability in estimating key mechanical properties of recycled and by-product aggregate concretes, and alternative regression-based models were developed to improve prediction accuracy. Overall, the findings demonstrate the potential for effective utilization of C&D wastes and industrial by-products in structural concrete, contributing to resource efficiency and reduced reliance on natural aggregates.
- Open Access
- 2 March 2026
- Published by Echo Academic Publishing in Environmental Research and Technology
- Vol. 9 (Special ) , 21-28
Effect of different types of fly ash on the properties of concrete mixtures: A comparative study
In the pursuit of enhancing the durability and sustainability of reinforced concrete structures, the incorporation of supplementary cementitious materials (SCMs) such as fly ash (FA) is advantageous, as it allows for the augmentation of concrete properties in both its fresh and hardened states. Nevertheless, it is acknowledged that the performance of concrete can be influenced to a certain extent by the specific properties of the FA utilized. This study investigates the effects of incorporating five different types of FA as a 25% replacement for ordinary Portland cement on the physical, mechanical, and microstructural properties of concrete mixtures, with a focus on enhancing the durability and sustainability of reinforced concrete structures. Pozzolanic activity was assessed at both 28 and 180 days. At 28 days, a reduction in portlandite content ranging from 14.5% to 22.6% was observed in all FA-containing samples, indicating the early activation of pozzolanic reactions. This reduction increased to 30.4%–33.9% by 180 days, confirming that pozzolanic activity intensified over time. Additionally, the incorporation of FA increased both the initial and final setting times by 15%–30%, which can be attributed to its reduced reactivity at early ages and the dilution effect from cement replacement. While the compressive strength of FA-containing samples was lower than that of control samples at early ages, by 180 days, the strength of the FA-modified cementitious composites reached acceptable levels for various applications. The inclusion of FA not only improves the sustainability of concrete by reducing cement consumption but also promotes the recycling of industrial waste, addressing environmental concerns. Despite variations in the chemical and physical properties of the different FA sources, no significant differences were observed in their impact on portlandite content and mechanical properties, suggesting that FA from different regions can be reliably used in construction without compromising performance. These findings support the broader use of FA in sustainable construction practices and contribute to a global understanding of its variability.
- 2 March 2026
- Published by Echo Academic Publishing in Environmental Research and Technology
- Vol. 9 (Special ) , 21-28
Open AccessEffect of different types of fly ash on the properties of concrete mixtures: A comparative study
In the pursuit of enhancing the durability and sustainability of reinforced concrete structures, the incorporation of supplementary cementitious materials (SCMs) such as fly ash (FA) is advantageous, as it allows for the augmentation of concrete properties in both its fresh and hardened states. Nevertheless, it is acknowledged that the performance of concrete can be influenced to a certain extent by the specific properties of the FA utilized. This study investigates the effects of incorporating five different types of FA as a 25% replacement for ordinary Portland cement on the physical, mechanical, and microstructural properties of concrete mixtures, with a focus on enhancing the durability and sustainability of reinforced concrete structures. Pozzolanic activity was assessed at both 28 and 180 days. At 28 days, a reduction in portlandite content ranging from 14.5% to 22.6% was observed in all FA-containing samples, indicating the early activation of pozzolanic reactions. This reduction increased to 30.4%–33.9% by 180 days, confirming that pozzolanic activity intensified over time. Additionally, the incorporation of FA increased both the initial and final setting times by 15%–30%, which can be attributed to its reduced reactivity at early ages and the dilution effect from cement replacement. While the compressive strength of FA-containing samples was lower than that of control samples at early ages, by 180 days, the strength of the FA-modified cementitious composites reached acceptable levels for various applications. The inclusion of FA not only improves the sustainability of concrete by reducing cement consumption but also promotes the recycling of industrial waste, addressing environmental concerns. Despite variations in the chemical and physical properties of the different FA sources, no significant differences were observed in their impact on portlandite content and mechanical properties, suggesting that FA from different regions can be reliably used in construction without compromising performance. These findings support the broader use of FA in sustainable construction practices and contribute to a global understanding of its variability.
- 4 June 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 110
Friedel's salt stability and sulfate durability of seawater mixed cement-based materials
- 4 June 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 110
Friedel's salt stability and sulfate durability of seawater mixed cement-based materials
- Open Access
- 1 May 2025
- Published by Alconpat Internacional in Revista ALCONPAT
- Vol. 15 (2) , 157-174
Reduction of the risk of the corrosion of seawater mixed cement-based materials.
Ultra-High-Performance Concretes are those concretes with notable characteristics in terms of compressive strength, durability, and ductility. These concretes emerged in the 1980s as a solution to the search for high durability through the implementation of particle packing models, to reduce the porosity and increase the densification level of the cement matrix, a feature that’s make them highly durable against various external potential deleterious agents. Currently, among the applications in which these concretes are being widely used, architectural applications are becoming increasingly more prominent, due to their versatility in adopting shapes, textures, finishes, etc. However, in these applications it will be advantageous to reduce the weight of the material, to improve its thermal conductivity, but ensuring that the material reach its compressive and flexural strengths within appropriate values for structural applications. To reduce the weight and to reach compressive and flexural strengths, this work evaluates the incorporation of expanded polystyrene perlite (EPP) in substitution by mass of a limestone sand (0, 30, 55, 80 and 100 %) and a synthetic PVA structural fiber. To evaluate the synergistic effect of the EPP and PVA in a UHPC cementitious matrix the following properties were examined: compressive strength, flexural strength, surface electrical resistivity, bulk electrical resistivity and thermal conductivity.
- 1 May 2025
- Published by Alconpat Internacional in Revista ALCONPAT
- Vol. 15 (2) , 157-174
Open AccessReduction of the risk of the corrosion of seawater mixed cement-based materials.
Ultra-High-Performance Concretes are those concretes with notable characteristics in terms of compressive strength, durability, and ductility. These concretes emerged in the 1980s as a solution to the search for high durability through the implementation of particle packing models, to reduce the porosity and increase the densification level of the cement matrix, a feature that’s make them highly durable against various external potential deleterious agents. Currently, among the applications in which these concretes are being widely used, architectural applications are becoming increasingly more prominent, due to their versatility in adopting shapes, textures, finishes, etc. However, in these applications it will be advantageous to reduce the weight of the material, to improve its thermal conductivity, but ensuring that the material reach its compressive and flexural strengths within appropriate values for structural applications. To reduce the weight and to reach compressive and flexural strengths, this work evaluates the incorporation of expanded polystyrene perlite (EPP) in substitution by mass of a limestone sand (0, 30, 55, 80 and 100 %) and a synthetic PVA structural fiber. To evaluate the synergistic effect of the EPP and PVA in a UHPC cementitious matrix the following properties were examined: compressive strength, flexural strength, surface electrical resistivity, bulk electrical resistivity and thermal conductivity.
- 7 November 2024
- Published by Springer Nature
- p. 408-415
Effect of Ion Concentration in the Mixing Water on Performance and Hydration Kinetics of Cement-Based Materials
- 7 November 2024
- Published by Springer Nature
- p. 408-415
Effect of Ion Concentration in the Mixing Water on Performance and Hydration Kinetics of Cement-Based Materials
- Open Access
Flexure Performance of Textile-Reinforced Cementitious Composites with Novel Inclined Reinforcements
Textile-reinforced cementitious composites have great potential to offer novel design opportunities for thin-section structures thanks to their superior material capabilities. In this work, new cementitious composites with novel reinforcement configurations are developed, which have superior mechanical properties. The cementitious composites contain inclined through-the-thickness reinforcements, and their enhanced performance on thin-section material hardening under flexural loading is demonstrated. Furthermore, a new practical FE modeling approach is proposed that involves the combined use of multiple cohesive regions and 1D reinforcement elements that pass through these regions with a bilinear material law. This approach provides a new computationally efficient modelling framework whereby reinforcement pull-out during hardening is readily captured without resorting to computationally demanding interface laws between the reinforcement and the cementititous matrix. The model can model enhanced hardening of new configurations and provides comparable results with the experimental findings. The model can be used in the modelling and design of novel cementitious composites with engineered reinforcement configurations. Overall, this study aims to open up new avenues for the smart material design of cementitious composites with novel structural reinforcements.
Open AccessFlexure Performance of Textile-Reinforced Cementitious Composites with Novel Inclined Reinforcements
Textile-reinforced cementitious composites have great potential to offer novel design opportunities for thin-section structures thanks to their superior material capabilities. In this work, new cementitious composites with novel reinforcement configurations are developed, which have superior mechanical properties. The cementitious composites contain inclined through-the-thickness reinforcements, and their enhanced performance on thin-section material hardening under flexural loading is demonstrated. Furthermore, a new practical FE modeling approach is proposed that involves the combined use of multiple cohesive regions and 1D reinforcement elements that pass through these regions with a bilinear material law. This approach provides a new computationally efficient modelling framework whereby reinforcement pull-out during hardening is readily captured without resorting to computationally demanding interface laws between the reinforcement and the cementititous matrix. The model can model enhanced hardening of new configurations and provides comparable results with the experimental findings. The model can be used in the modelling and design of novel cementitious composites with engineered reinforcement configurations. Overall, this study aims to open up new avenues for the smart material design of cementitious composites with novel structural reinforcements.
- 1 January 2024
- Published by Springer Nature
- p. 472-479
Performance of 3D-Printed Mortar with Varying Textile Reinforcement Properties
- 1 January 2024
- Published by Springer Nature
- p. 472-479
Performance of 3D-Printed Mortar with Varying Textile Reinforcement Properties
- 1 January 2024
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 36 (1)
Microstructural Examination of Black Seawater Mixed Sulfate-Resistant Cement Concrete
- 1 January 2024
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 36 (1)
Microstructural Examination of Black Seawater Mixed Sulfate-Resistant Cement Concrete
- 25 October 2023
- Published by Springer Nature
- p. 373-381
The Role of the Type of Mix Water and Ion Concentration on the Fresh State Properties of Mortar
- 25 October 2023
- Published by Springer Nature
- p. 373-381
The Role of the Type of Mix Water and Ion Concentration on the Fresh State Properties of Mortar