Shanshan Gao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shanshan Gao has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
Fushan Chen
Qingdao University of Science and Technology, Qingdao, People’s Republic of China
8 shared publications- Xiaoming Song
College of Chemical Engineering, Qingdao University of Science and Technology, Qingdao 266042, China
8 shared publications Xianglin Qiu
Qingdao University of Science and Technology, Qingdao, China
6 shared publicationsTianshuo Zhang
College of Chemical Engineering, Qingdao University of Science and Technology, Qingdao 266042, China
4 shared publicationsYuzheng Wang
Qingdao University of Science and Technology, Qingdao, People’s Republic of China
4 shared publicationsChenglin Liu
Qingdao University of Science and Technology, Qingdao, China
3 shared publications
Latest Publications
- 10 June 2025
- Published by Springer Nature in Cellulose
- Vol. 32 (10) , 6181-6195
Construction of ZIF67/bacterial cellulose (BC) electrochemical sensor for the detection of dibutyl phthalate (DBP)
- 10 June 2025
- Published by Springer Nature in Cellulose
- Vol. 32 (10) , 6181-6195
Construction of ZIF67/bacterial cellulose (BC) electrochemical sensor for the detection of dibutyl phthalate (DBP)
- 28 April 2025
- Published by Springer Nature in Ionics
- Vol. 31 (6) , 5995-6007
Co3O4/RuO2 mimetic nanostructures formed on beryllium copper substrates: as efficient catalysts for hydrogen evolution reactions
- 28 April 2025
- Published by Springer Nature in Ionics
- Vol. 31 (6) , 5995-6007
Co3O4/RuO2 mimetic nanostructures formed on beryllium copper substrates: as efficient catalysts for hydrogen evolution reactions
- 8 January 2025
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 49 (7) , 2782-2790
Hydrogen evolution using a self-supported starch carbon aerogel electrocatalyst loaded with CeO2–MoxC in alkaline saline water
Developed a self-supporting porous carbon aerogel electrode, namely, CeO2–MoxC/PSCA, Electrochemical tests revealed its outstanding hydrogen evolution catalytic activity in both alkaline electrolyte and alkaline saline water.
- 8 January 2025
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 49 (7) , 2782-2790
Hydrogen evolution using a self-supported starch carbon aerogel electrocatalyst loaded with CeO2–MoxC in alkaline saline water
Developed a self-supporting porous carbon aerogel electrode, namely, CeO2–MoxC/PSCA, Electrochemical tests revealed its outstanding hydrogen evolution catalytic activity in both alkaline electrolyte and alkaline saline water.
- 4 January 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 683 (Pt 2) , 1057-1066
CeF3-Accelerated surface reconstruction of MoO2 nanosheets into coral-like CeF3/MoO2 composites enhances the oxygen evolution reaction for efficient water splitting
- 4 January 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 683 (Pt 2) , 1057-1066
CeF3-Accelerated surface reconstruction of MoO2 nanosheets into coral-like CeF3/MoO2 composites enhances the oxygen evolution reaction for efficient water splitting
- 19 November 2024
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 40 (1) , 161-172
Hybridization to prepare environmentally friendly, cost-effective superhydrophobic oleophobic coatings
Most petroleum-based polymers are non-biodegradable, leading to serious environmental concerns. Paper has become an important substitute for plastic. The hygroscopicity of paper in a humid environment causes its physical and mechanical strength to decrease. The development of superhydrophobic paper offers an effective solution that significantly improves water resistance and wettability, while also imbuing self-cleaning and stain resistance. In this study, the superhydrophobic oil coating was prepared with tetraethyl orthosilicate (TEOS) and octadecyl trichlorosilane (OTS) as organic components and nano titanium dioxide particles as inorganic components by hydrolysis condensation under alkaline conditions. The microstructure and chemical composition of the coating were analyzed by SEM and other techniques. In addition, we also studied the influence of TiO2 quantity and other factors on the wettability of the paper interface, and determined the optimal preparation process to achieve the super hydrophobic oil repellent coating. The results show that when the addition amount of nano-titanium dioxide is 0.16 %, the reaction time is 6 h, the volume ratio of organosilane TEOS to OTS is 1:2 and the addition amount of TEOS is 6 mL (that is, when the total addition amount of organosilane is 23 %), the water contact angle on the surface of the layer is 159°±1.5°, the rolling angle is 3.5°±0.5°, the glycerol contact angle is 155°, and the ethylene glycol contact angle is 142°, indicating that this coating has excellent superhydrophobic and highly oleophobic properties. In addition, the coating has low adhesion to water, good self-cleaning ability and corrosion resistance.
- 19 November 2024
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 40 (1) , 161-172
Hybridization to prepare environmentally friendly, cost-effective superhydrophobic oleophobic coatings
Most petroleum-based polymers are non-biodegradable, leading to serious environmental concerns. Paper has become an important substitute for plastic. The hygroscopicity of paper in a humid environment causes its physical and mechanical strength to decrease. The development of superhydrophobic paper offers an effective solution that significantly improves water resistance and wettability, while also imbuing self-cleaning and stain resistance. In this study, the superhydrophobic oil coating was prepared with tetraethyl orthosilicate (TEOS) and octadecyl trichlorosilane (OTS) as organic components and nano titanium dioxide particles as inorganic components by hydrolysis condensation under alkaline conditions. The microstructure and chemical composition of the coating were analyzed by SEM and other techniques. In addition, we also studied the influence of TiO2 quantity and other factors on the wettability of the paper interface, and determined the optimal preparation process to achieve the super hydrophobic oil repellent coating. The results show that when the addition amount of nano-titanium dioxide is 0.16 %, the reaction time is 6 h, the volume ratio of organosilane TEOS to OTS is 1:2 and the addition amount of TEOS is 6 mL (that is, when the total addition amount of organosilane is 23 %), the water contact angle on the surface of the layer is 159°±1.5°, the rolling angle is 3.5°±0.5°, the glycerol contact angle is 155°, and the ethylene glycol contact angle is 142°, indicating that this coating has excellent superhydrophobic and highly oleophobic properties. In addition, the coating has low adhesion to water, good self-cleaning ability and corrosion resistance.
- 19 November 2024
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 40 (1) , 191-202
Study on the properties of ground film paper prepared from lactic acid-modified cellulose
Lactic acid impregnated ground film paper was prepared using the method of lactic acid impregnation of raw paper. The physical properties, chemical composition, crystallinity, thermal stability, surface morphology of the paper, barrier properties, and light transmittance of the lactic acid paper were investigated using FT-IR, XRD, TGA, SEM, water vapor blocking, oxygen blocking, mechanical properties testing, and optical property testing. Results showed that at room temperature (20 °C), when lactic acid concentration was 100 %, reaction time was 48 h, and 100 °C high temperature drying prepared lactic acid paper, it exhibited superior performance: dry strength of 2.83 IkN/m, wet strength of 0.36 kN/m, Cobb value of 4.50 g/m2, tear of 359.42 mN, water vapor barrier of 693.46 g m−2 24 h−1, and oxygen barrier of 933.43 cm3 m−2 24 h−1. Degradation rate reached 22.94 % after two weeks of soil landfill.
- 19 November 2024
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 40 (1) , 191-202
Study on the properties of ground film paper prepared from lactic acid-modified cellulose
Lactic acid impregnated ground film paper was prepared using the method of lactic acid impregnation of raw paper. The physical properties, chemical composition, crystallinity, thermal stability, surface morphology of the paper, barrier properties, and light transmittance of the lactic acid paper were investigated using FT-IR, XRD, TGA, SEM, water vapor blocking, oxygen blocking, mechanical properties testing, and optical property testing. Results showed that at room temperature (20 °C), when lactic acid concentration was 100 %, reaction time was 48 h, and 100 °C high temperature drying prepared lactic acid paper, it exhibited superior performance: dry strength of 2.83 IkN/m, wet strength of 0.36 kN/m, Cobb value of 4.50 g/m2, tear of 359.42 mN, water vapor barrier of 693.46 g m−2 24 h−1, and oxygen barrier of 933.43 cm3 m−2 24 h−1. Degradation rate reached 22.94 % after two weeks of soil landfill.
- 29 October 2024
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 39 (4) , 685-695
Preparation of environmentally friendly hydrophobic paper by coating method
Non-Newtonian viscous fluids such as yogurt, honey, etc., due to their extremely high viscosity and complex fluidity, remain on food containers after use, where adhesion and staining occurs, which is a great inconvenience and causes a lot of wasted resources. Hydrophobic coatings can be an excellent candidate for eliminating liquid waste. Inexpensive wollastonite nanoparticles were used to build rough micro- and nano-structures, and chitosan was used to emulsify rice bran wax to prepare green and low surface energy emulsions. The above two were mechanically mixed to obtain the hydrophobic emulsion, and coated on the paper surface and heat-treated to prepare the hydrophobic paper. Contact angles up to 157.3°. The coating exhibits good self-cleaning properties for a wide range of non-Newtonian viscous food liquids and shows excellent resistance to repeated machine bending and multiple abrasion damages, while maintaining its hydrophobicity. After 40 cycles of friction, the contact angle is 148.1°, which is still close to 150° and has good hydrophobicity. In addition, the coating has great potential for application to the interior surfaces of various food packages to reduce or even eliminate liquid food residues.
- 29 October 2024
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 39 (4) , 685-695
Preparation of environmentally friendly hydrophobic paper by coating method
Non-Newtonian viscous fluids such as yogurt, honey, etc., due to their extremely high viscosity and complex fluidity, remain on food containers after use, where adhesion and staining occurs, which is a great inconvenience and causes a lot of wasted resources. Hydrophobic coatings can be an excellent candidate for eliminating liquid waste. Inexpensive wollastonite nanoparticles were used to build rough micro- and nano-structures, and chitosan was used to emulsify rice bran wax to prepare green and low surface energy emulsions. The above two were mechanically mixed to obtain the hydrophobic emulsion, and coated on the paper surface and heat-treated to prepare the hydrophobic paper. Contact angles up to 157.3°. The coating exhibits good self-cleaning properties for a wide range of non-Newtonian viscous food liquids and shows excellent resistance to repeated machine bending and multiple abrasion damages, while maintaining its hydrophobicity. After 40 cycles of friction, the contact angle is 148.1°, which is still close to 150° and has good hydrophobicity. In addition, the coating has great potential for application to the interior surfaces of various food packages to reduce or even eliminate liquid food residues.
- 3 April 2024
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 39 (2) , 213-227
Modification of polyvinyl alcohol with 2-hydroxypropionic acid and cross-linking with glutaraldehyde for the preparation of biodegradable mulch paper and its properties
The preparation of biodegradable mulch film with paper-based materials has become a significant focus in mulch film development due to the serious pollution caused by plastic mulch film. This study utilized the esterification cross-linking reaction of LA, PVA, and GA to coat the surface of paper as the substrate. FTIR, TGA, XRD, SEM, tensile testing, and oxygen, water vapor barrier performance tests were performed. The optimal conditions for film preparation were determined to be a 10 % PVA aqueous solution, 5 % GA content, and a PVA/LA/GA ratio of 1:2:1. The resulting film paper exhibited a dry strength of 6.52 kN/m, a wet strength of 0.23 kN/m, a tearing degree of 969.35 mN, a Cobb value of 12.04 g/m2, a water vapor transmission rate of 573.27 g m−2 24 h−1, and an oxygen transmission rate of 7.373 cm3 m−2 24 h−1. After a 6-week landfill degradation test, the film showed a degradation rate of 25.3 %, while still maintaining a tensile strength of 1.89 kN/m. Field application tests in greenhouses confirmed that the film paper facilitated the growth of strawberry, its mechanical and barrier properties suitable for a biodegradable paper mulch.
- 3 April 2024
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 39 (2) , 213-227
Modification of polyvinyl alcohol with 2-hydroxypropionic acid and cross-linking with glutaraldehyde for the preparation of biodegradable mulch paper and its properties
The preparation of biodegradable mulch film with paper-based materials has become a significant focus in mulch film development due to the serious pollution caused by plastic mulch film. This study utilized the esterification cross-linking reaction of LA, PVA, and GA to coat the surface of paper as the substrate. FTIR, TGA, XRD, SEM, tensile testing, and oxygen, water vapor barrier performance tests were performed. The optimal conditions for film preparation were determined to be a 10 % PVA aqueous solution, 5 % GA content, and a PVA/LA/GA ratio of 1:2:1. The resulting film paper exhibited a dry strength of 6.52 kN/m, a wet strength of 0.23 kN/m, a tearing degree of 969.35 mN, a Cobb value of 12.04 g/m2, a water vapor transmission rate of 573.27 g m−2 24 h−1, and an oxygen transmission rate of 7.373 cm3 m−2 24 h−1. After a 6-week landfill degradation test, the film showed a degradation rate of 25.3 %, while still maintaining a tensile strength of 1.89 kN/m. Field application tests in greenhouses confirmed that the film paper facilitated the growth of strawberry, its mechanical and barrier properties suitable for a biodegradable paper mulch.
- 16 March 2024
- Published by Elsevier in Carbohydrate Polymers
- Vol. 334, 122066
Charge transport properties and mechanisms of bacterial cellulose (BC)-Zinc complexes
- 16 March 2024
- Published by Elsevier in Carbohydrate Polymers
- Vol. 334, 122066
Charge transport properties and mechanisms of bacterial cellulose (BC)-Zinc complexes
- 13 February 2024
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 39 (2) , 189-199
Preparation and characterization of nanocellulose acetate and acrylate polymer composite membrane
In the present study, a nanocellulose acetate and acrylate polymer composite membrane was formed by the phase transfer technique. The physical and mechanical properties, water flux, and desalination performance of the achieved composite membrane were investigated. When 3 % (w/w) acrylate polymer, 10 % acetylated nanocellulose, and 0.3 % mass fraction of TiO2 were used for the formation of the membrane, the obtained product could reach a tensile strength of 1.97 N/mm2 and a pure water flux of 51 L/(m2 h). Moreover, the composite membrane achieved a desalination rate of 92.4 %. Thus, the obtained composite membrane could meet the performance requirements for the treatment of industrial wastewater.
- 13 February 2024
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 39 (2) , 189-199
Preparation and characterization of nanocellulose acetate and acrylate polymer composite membrane
In the present study, a nanocellulose acetate and acrylate polymer composite membrane was formed by the phase transfer technique. The physical and mechanical properties, water flux, and desalination performance of the achieved composite membrane were investigated. When 3 % (w/w) acrylate polymer, 10 % acetylated nanocellulose, and 0.3 % mass fraction of TiO2 were used for the formation of the membrane, the obtained product could reach a tensile strength of 1.97 N/mm2 and a pure water flux of 51 L/(m2 h). Moreover, the composite membrane achieved a desalination rate of 92.4 %. Thus, the obtained composite membrane could meet the performance requirements for the treatment of industrial wastewater.