Ping Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ping Chen has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
Lei Wang
School of Computer and Artificial Intelligence, Beijing Technology and Business University, Beijing, 100048, China
6 shared publications- Zhihai Liu
School of Physics and Electronic Information, Yantai University, Yantai 264005, China
6 shared publications - Xiaoyin Xie
School of Chemistry and Chemical Technology, Hubei Polytechnic University, Huangshi 435003, China
4 shared publications Jun Sun
Yantai University
3 shared publicationsRen Sheng
Yantai University
3 shared publicationsChenxi Sun
Yantai University
2 shared publications
Latest Publications
- Open Access
- 13 November 2026
- Published by Tsinghua University Press in Nano Research
- Vol. 20 (1)
Synergistic phase regulation and defect passivation for efficient deep-blue quasi-2D perovskite light-emitting diodes
Quasi-two-dimensional (quasi-2D) metal-halide perovskite light-emitting diodes (PeLEDs) have attracted extensive attention for next-generation display and lighting applications, while achieving efficient and stable deep-blue emission below 460 nm remains challenging, primarily attributed to the unfavorable phase distribution severe, trap-assisted nonradiative recombination and ion migration. Herein, the multifunctional defect-passivation strategy by using 3-(N-morpholino)-2-hydroxypropanesulfonic acid (MOPSO) as an additive is investigated. The sulfonate (–SO3−) and hydroxyl (–OH) groups in MOPSO enable dual interactions with the perovskite lattice. Specifically, the electron-rich sulfonate group chelates with undercoordinated Pb2+ ions, while the hydroxyl group forms hydrogen bonds with halide ions. The synergistic interactions regulate the crystallization process to tailor phase distribution, suppress trap-assisted nonradiative recombination and inhibit ion migration. As a result, the optimized deep-blue PeLEDs exhibit a peak external quantum efficiency of 4.13% and a maximum luminance of 1055 cd·m−2, with a well-defined electroluminescence peak at 456 nm. Moreover, negligible spectral shift is observed over a wide driving-voltage range, indicating improved operational stability. This work demonstrates a simple molecular engineering strategy for advancing efficient and stable deep-blue quasi-2D PeLEDs.
- 13 November 2026
- Published by Tsinghua University Press in Nano Research
- Vol. 20 (1)
Open AccessSynergistic phase regulation and defect passivation for efficient deep-blue quasi-2D perovskite light-emitting diodes
Quasi-two-dimensional (quasi-2D) metal-halide perovskite light-emitting diodes (PeLEDs) have attracted extensive attention for next-generation display and lighting applications, while achieving efficient and stable deep-blue emission below 460 nm remains challenging, primarily attributed to the unfavorable phase distribution severe, trap-assisted nonradiative recombination and ion migration. Herein, the multifunctional defect-passivation strategy by using 3-(N-morpholino)-2-hydroxypropanesulfonic acid (MOPSO) as an additive is investigated. The sulfonate (–SO3−) and hydroxyl (–OH) groups in MOPSO enable dual interactions with the perovskite lattice. Specifically, the electron-rich sulfonate group chelates with undercoordinated Pb2+ ions, while the hydroxyl group forms hydrogen bonds with halide ions. The synergistic interactions regulate the crystallization process to tailor phase distribution, suppress trap-assisted nonradiative recombination and inhibit ion migration. As a result, the optimized deep-blue PeLEDs exhibit a peak external quantum efficiency of 4.13% and a maximum luminance of 1055 cd·m−2, with a well-defined electroluminescence peak at 456 nm. Moreover, negligible spectral shift is observed over a wide driving-voltage range, indicating improved operational stability. This work demonstrates a simple molecular engineering strategy for advancing efficient and stable deep-blue quasi-2D PeLEDs.
- Open Access
- 7 August 2026
- Published by MDPI AG in Micromachines
- Vol. 17 (8) , 940
Efficient Non-Doped White Organic Light-Emitting Diodes Based on an Interface Exciplex Structure
Non-doped organic light-emitting diodes (OLEDs) feature simple fabrication processes and favorable repeatability, yet their overall device performance remains unsatisfactory. Here we propose a novel white OLED based on ultrathin emissive layers (EMLs). The novel efficient device structure is constructed based on an interface exciplex structure. Color-stable or color-tunable white OLEDs can be realized by tuning the interlayer thickness. The resulting color-tunable white device obtains a maximum power efficiency of 32.03 lm/W with a correlated color temperature span from 4091 K to 5376 K. Furthermore, the luminescence mechanism is thoroughly investigated. The shift of the spectra in the color-tunable device is mainly attributed to the movement of the main exciton recombination zone.
- 7 August 2026
- Published by MDPI AG in Micromachines
- Vol. 17 (8) , 940
Open AccessEfficient Non-Doped White Organic Light-Emitting Diodes Based on an Interface Exciplex Structure
Non-doped organic light-emitting diodes (OLEDs) feature simple fabrication processes and favorable repeatability, yet their overall device performance remains unsatisfactory. Here we propose a novel white OLED based on ultrathin emissive layers (EMLs). The novel efficient device structure is constructed based on an interface exciplex structure. Color-stable or color-tunable white OLEDs can be realized by tuning the interlayer thickness. The resulting color-tunable white device obtains a maximum power efficiency of 32.03 lm/W with a correlated color temperature span from 4091 K to 5376 K. Furthermore, the luminescence mechanism is thoroughly investigated. The shift of the spectra in the color-tunable device is mainly attributed to the movement of the main exciton recombination zone.
- 4 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Hybrid-Dimensional Silver Nanowire/Sodium Alginate: MXene Transparent Electrodes for High-Performance Flexible Organic Light-Emitting Diodes
High-performance flexible transparent conductive electrodes (FTCEs) are critical for flexible displays and wearable devices, yet high roughness and long-term environmental stability remain significant hurdles for commercial applications. Herein, a hybrid-dimensional architecture is proposed to fabricate FTCEs by integrating 1D silver nanowires (AgNWs), 2D MXene nanosheets, and 3D bio-based sodium alginate (SA) through a facile all-aqueous process. Thanks to the robust hydrogen-bonding network between MXene and SA, the hybrid FTCE exhibits remarkable mechanical stability and minimal resistance deterioration over 180 days of ambient storage. The optimized AgNWs/SA:MXene FTCE achieves 87.8% transmittance at 550 nm with a sheet resistance of 12.3 Ω sq–1. Moreover, flexible green OLEDs based on hybrid FTCE demonstrate an outstanding peak luminance of 24,687 cd m–2 and an external quantum efficiency of 23.9% with suppressed efficiency roll-off, which is attributed to the enhanced interfacial wettability and reduced root-mean-square surface roughness. This work provides a sustainable and versatile strategy for developing high-performance, eco-friendly flexible optoelectronics.
- 4 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Hybrid-Dimensional Silver Nanowire/Sodium Alginate: MXene Transparent Electrodes for High-Performance Flexible Organic Light-Emitting Diodes
High-performance flexible transparent conductive electrodes (FTCEs) are critical for flexible displays and wearable devices, yet high roughness and long-term environmental stability remain significant hurdles for commercial applications. Herein, a hybrid-dimensional architecture is proposed to fabricate FTCEs by integrating 1D silver nanowires (AgNWs), 2D MXene nanosheets, and 3D bio-based sodium alginate (SA) through a facile all-aqueous process. Thanks to the robust hydrogen-bonding network between MXene and SA, the hybrid FTCE exhibits remarkable mechanical stability and minimal resistance deterioration over 180 days of ambient storage. The optimized AgNWs/SA:MXene FTCE achieves 87.8% transmittance at 550 nm with a sheet resistance of 12.3 Ω sq–1. Moreover, flexible green OLEDs based on hybrid FTCE demonstrate an outstanding peak luminance of 24,687 cd m–2 and an external quantum efficiency of 23.9% with suppressed efficiency roll-off, which is attributed to the enhanced interfacial wettability and reduced root-mean-square surface roughness. This work provides a sustainable and versatile strategy for developing high-performance, eco-friendly flexible optoelectronics.
- 25 February 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (5) , 1291-1294
Extremely low-efficiency roll-off and extended lifetime in hybrid WOLEDs based on a TADF forming co-host interlayer
White organic light-emitting diodes (WOLEDs) employing ultrathin emitting layers (UEMLs) have received more attention due to their simple properties. However, UEMLs-based WOLEDs still suffer from severe efficiency roll-off and poor operational lifetime. Herein, we propose an innovative interlayer strategy to construct high-performance WOLEDs comprising blue fluorescent and orange phosphorescent UEMLs. Utilizing what we believe to be a novel TADF-based co-host interlayer, the resulting device achieves extremely low-efficiency roll-off of only 1.7% and a superior T 50 operational lifetime of 3319.2 h at 1000 cd/m 2 , among the best values reported so far for hybrid WOLEDs. It also shows excellently stable spectra and a maximum power efficiency of 54.7 lm/W. The high performance should be attributed to more balanced carrier transport as well as efficient Förster energy transfer. We believe our findings present a new strategy to develop high-performance UEMLs-based WOLEDs.
- 25 February 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (5) , 1291-1294
Extremely low-efficiency roll-off and extended lifetime in hybrid WOLEDs based on a TADF forming co-host interlayer
White organic light-emitting diodes (WOLEDs) employing ultrathin emitting layers (UEMLs) have received more attention due to their simple properties. However, UEMLs-based WOLEDs still suffer from severe efficiency roll-off and poor operational lifetime. Herein, we propose an innovative interlayer strategy to construct high-performance WOLEDs comprising blue fluorescent and orange phosphorescent UEMLs. Utilizing what we believe to be a novel TADF-based co-host interlayer, the resulting device achieves extremely low-efficiency roll-off of only 1.7% and a superior T 50 operational lifetime of 3319.2 h at 1000 cd/m 2 , among the best values reported so far for hybrid WOLEDs. It also shows excellently stable spectra and a maximum power efficiency of 54.7 lm/W. The high performance should be attributed to more balanced carrier transport as well as efficient Förster energy transfer. We believe our findings present a new strategy to develop high-performance UEMLs-based WOLEDs.
- 1 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (12) , 2305-2308
High Spectral Resemblance Index Candlelight Organic Light-Emitting Diodes Based on Cascade Energy Transfer
- 1 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (12) , 2305-2308
High Spectral Resemblance Index Candlelight Organic Light-Emitting Diodes Based on Cascade Energy Transfer
- 10 October 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (41) , 415110
An effective strategy to achieve efficient white organic light-emitting diodes based on complex molecular design of an alternative novel blue exciplex
Actualizing white organic light-emitting diodes (WOLEDs) with an efficient blue exciplex rather than inferior blue-emitting dyes is still a challenge. Herein, we propose a novel green exciplex system composed of 9′-diphenyl-9H, 9′H-3,3′-bicarbazole and 2,4-diphenyl-6-(9,9′-spirobi [9H-fluoren]-3-yl)-1, 3, 5-triazine. The emission peak can be transferred from 519 nm to 483 nm by precisely regulating the donor–acceptor ratio and inert material concentration of the exciplex. Its intrinsic mechanism is due to the distance between the electrons and holes in the charge transfer state of exciplexes, which is increased because of the increasing average distance between the donor and acceptor. The novel blue exciplex obtained by spectral transfer shows an external quantum efficiency of 3.3% with a current efficiency (CE) of 8.2 cd A−1. Furthermore, a high-performance WOLED is fabricated by combining the sky blue exciplex with yellow phosphorescence, which achieves a CE of 33.7 cd A−1 and remained at 31.8 cd A−1 at a luminance of 1000 cd m−2. The high performance of the WOLED can be attributed to the increased average distance between the donor and acceptor due to the molecular dilution effect, which improves the efficiency of the reverse intersystem crossing and facilitates Förster energy transfer from the exciplex to the yellow dye. These results demonstrate a general approach to realizing blue emission in a WOLED without a complex molecular design process.
- 10 October 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (41) , 415110
An effective strategy to achieve efficient white organic light-emitting diodes based on complex molecular design of an alternative novel blue exciplex
Actualizing white organic light-emitting diodes (WOLEDs) with an efficient blue exciplex rather than inferior blue-emitting dyes is still a challenge. Herein, we propose a novel green exciplex system composed of 9′-diphenyl-9H, 9′H-3,3′-bicarbazole and 2,4-diphenyl-6-(9,9′-spirobi [9H-fluoren]-3-yl)-1, 3, 5-triazine. The emission peak can be transferred from 519 nm to 483 nm by precisely regulating the donor–acceptor ratio and inert material concentration of the exciplex. Its intrinsic mechanism is due to the distance between the electrons and holes in the charge transfer state of exciplexes, which is increased because of the increasing average distance between the donor and acceptor. The novel blue exciplex obtained by spectral transfer shows an external quantum efficiency of 3.3% with a current efficiency (CE) of 8.2 cd A−1. Furthermore, a high-performance WOLED is fabricated by combining the sky blue exciplex with yellow phosphorescence, which achieves a CE of 33.7 cd A−1 and remained at 31.8 cd A−1 at a luminance of 1000 cd m−2. The high performance of the WOLED can be attributed to the increased average distance between the donor and acceptor due to the molecular dilution effect, which improves the efficiency of the reverse intersystem crossing and facilitates Förster energy transfer from the exciplex to the yellow dye. These results demonstrate a general approach to realizing blue emission in a WOLED without a complex molecular design process.
- 16 April 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (21) , 10891-10898
Management of interfacial energy band alignment in wide-bandgap perovskite solar cells for performance improvement
Wide-bandgap perovskite solar cells (PSCs) have been intensively studied owing to their excellent absorption of short-wavelength sunlight. Due to the highly-located lowest unoccupied molecular orbital (LUMO) level of wide-bandgap perovskites, developing a suitable electron transport layer for wide-bandgap PSCs has become a challenge. In this work, we adjusted the interfacial energy band alignment to improve the performance of wide-bandgap PSCs. With the addition of poly(9,9-bis(3′-(N,N-dimethyl)-N-ethylammoinium-propyl-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene))dibromide (PFN-Br), the conduction band of SnO2 was tuned from −4.33 to −3.78 eV, which is much closer to the LUMO level (−3.65 eV) of the Cs0.15FA0.79MA0.06Pb(I0.7Br0.3)3 perovskite (with a bandgap of 1.74 eV). Moreover, with the coating of polyethylenimine (PEI), the work function of the ITO cathode shifted from −4.7 to −4.05 eV. With this technique, the energy-level mismatch was significantly reduced at the interface of the cathode side, which facilitated the electron transport in the PSCs. As a result, the average power-conversion-efficiency (PCE) of the wide-bandgap PSCs improved from 17.4% to 19.8% upon the use of PFN-Br and PEI. The best PSC obtained with this strategy exhibits a high PCE of 20.2% and a large open-circuit voltage of 1.29 V, indicating the effectiveness of energy level adjustment in wide-bandgap PSCs.
- 16 April 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (21) , 10891-10898
Management of interfacial energy band alignment in wide-bandgap perovskite solar cells for performance improvement
Wide-bandgap perovskite solar cells (PSCs) have been intensively studied owing to their excellent absorption of short-wavelength sunlight. Due to the highly-located lowest unoccupied molecular orbital (LUMO) level of wide-bandgap perovskites, developing a suitable electron transport layer for wide-bandgap PSCs has become a challenge. In this work, we adjusted the interfacial energy band alignment to improve the performance of wide-bandgap PSCs. With the addition of poly(9,9-bis(3′-(N,N-dimethyl)-N-ethylammoinium-propyl-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene))dibromide (PFN-Br), the conduction band of SnO2 was tuned from −4.33 to −3.78 eV, which is much closer to the LUMO level (−3.65 eV) of the Cs0.15FA0.79MA0.06Pb(I0.7Br0.3)3 perovskite (with a bandgap of 1.74 eV). Moreover, with the coating of polyethylenimine (PEI), the work function of the ITO cathode shifted from −4.7 to −4.05 eV. With this technique, the energy-level mismatch was significantly reduced at the interface of the cathode side, which facilitated the electron transport in the PSCs. As a result, the average power-conversion-efficiency (PCE) of the wide-bandgap PSCs improved from 17.4% to 19.8% upon the use of PFN-Br and PEI. The best PSC obtained with this strategy exhibits a high PCE of 20.2% and a large open-circuit voltage of 1.29 V, indicating the effectiveness of energy level adjustment in wide-bandgap PSCs.
- 27 August 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 26 (35) , 23487-23494
An organic cathode for low-temperature processed, flexible ternary organic solar cells with high-performance
In this study, we developed a flexible cathode for fabricating high-performance ternary organic solar cells (OSCs). With solvent engineering and acid treatment, the conductivity of the poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) electrode was significantly enhanced with the sheet resistance reduced from 1081 to 83 Ω sq−1. After being coated with polyethylenimine, work function of the PEDOT:PSS electrode was tuned from −5.07 to −4.12 eV, which is beneficial for electron collection in OSCs. With this technique, the OSCs (on glass) showed an average power conversion efficiency (PCE) of 16.3%, which is comparable to that of conventional inverted OSCs with commonly used indium-tin oxide and sol–gel-processed zinc oxide. However, the processing temperature of the inverted OSCs was dramatically lowered from 200 to 120 °C. The flexible OSCs (on polyethylene naphthalate/PEDOT:PSS/PEIE) exhibited a high PCE of 14.1%. After being bended for 300 cycles, the PCE was only degraded by 8.5%, indicating the excellent bendability of the flexible OSCs with the organic cathode.
- 27 August 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 26 (35) , 23487-23494
An organic cathode for low-temperature processed, flexible ternary organic solar cells with high-performance
In this study, we developed a flexible cathode for fabricating high-performance ternary organic solar cells (OSCs). With solvent engineering and acid treatment, the conductivity of the poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) electrode was significantly enhanced with the sheet resistance reduced from 1081 to 83 Ω sq−1. After being coated with polyethylenimine, work function of the PEDOT:PSS electrode was tuned from −5.07 to −4.12 eV, which is beneficial for electron collection in OSCs. With this technique, the OSCs (on glass) showed an average power conversion efficiency (PCE) of 16.3%, which is comparable to that of conventional inverted OSCs with commonly used indium-tin oxide and sol–gel-processed zinc oxide. However, the processing temperature of the inverted OSCs was dramatically lowered from 200 to 120 °C. The flexible OSCs (on polyethylene naphthalate/PEDOT:PSS/PEIE) exhibited a high PCE of 14.1%. After being bended for 300 cycles, the PCE was only degraded by 8.5%, indicating the excellent bendability of the flexible OSCs with the organic cathode.
- Open Access
- 1 June 2024
- Published by Tsinghua University Press in Nano Research
- Vol. 18 (6)
Stable and efficient blue quasi-2D perovskite light-emitting diodes enabled by synergistic passivation engineering
Perovskite light-emitting diodes (PeLEDs) have emerged as a promising candidate for next-generation displays owing to their excellent luminescent properties and low cost. However, the development of deep blue PeLEDs has been hindered compared to red and green emission devices, largely due to the challenge of an unstable spectrum. In this work, we present a method for achieving spectral stabilization by using the organic ligand G SALT. Combined with experimental results, we confirmed that the multiple interactions between G SALT and perovskite components played an important role in rearranging phase distribution and enhancing spectral stability. The fabricated deep blue PeLEDs demonstrated electroluminescence (EL) peak at 456 nm with CIE coordinates of (0.149, 0.063), meeting well with the Rec.2020 standard. Meanwhile, the peak external quantum efficiency (EQE) of 2.5% accompanied by the maximum luminance (Lmax) of 969.7 cd/m² was achieved. The T50 lifetime was prolonged to 10 min under a constant current density of 12 mA cm−2, and there was no significant spectral shift in the EL spectra at high driving voltages ranging from 3.5 V to 6.5 V. Furthermore, the films demonstrated stable photoluminescence spectra when subjected to ultraviolet excitation at 365 nm and continuous heating at 65°C. This study confirms the active role of organic compound ligands in quasi-2D perovskites and provides a new approach for developing stable ligands for the luminescent layer of perovskites in the future.
- 1 June 2024
- Published by Tsinghua University Press in Nano Research
- Vol. 18 (6)
Open AccessStable and efficient blue quasi-2D perovskite light-emitting diodes enabled by synergistic passivation engineering
Perovskite light-emitting diodes (PeLEDs) have emerged as a promising candidate for next-generation displays owing to their excellent luminescent properties and low cost. However, the development of deep blue PeLEDs has been hindered compared to red and green emission devices, largely due to the challenge of an unstable spectrum. In this work, we present a method for achieving spectral stabilization by using the organic ligand G SALT. Combined with experimental results, we confirmed that the multiple interactions between G SALT and perovskite components played an important role in rearranging phase distribution and enhancing spectral stability. The fabricated deep blue PeLEDs demonstrated electroluminescence (EL) peak at 456 nm with CIE coordinates of (0.149, 0.063), meeting well with the Rec.2020 standard. Meanwhile, the peak external quantum efficiency (EQE) of 2.5% accompanied by the maximum luminance (Lmax) of 969.7 cd/m² was achieved. The T50 lifetime was prolonged to 10 min under a constant current density of 12 mA cm−2, and there was no significant spectral shift in the EL spectra at high driving voltages ranging from 3.5 V to 6.5 V. Furthermore, the films demonstrated stable photoluminescence spectra when subjected to ultraviolet excitation at 365 nm and continuous heating at 65°C. This study confirms the active role of organic compound ligands in quasi-2D perovskites and provides a new approach for developing stable ligands for the luminescent layer of perovskites in the future.
- 13 March 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (15) , 7670-7677
Crystallization control of wide-bandgap perovskites for efficient solar cells via adding an anti-solvent into the perovskite precursor
We controlled the crystallization process of wide band-gap perovskite films by directly adding an anti-solvent into the perovskite precursor.
- 13 March 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (15) , 7670-7677
Crystallization control of wide-bandgap perovskites for efficient solar cells via adding an anti-solvent into the perovskite precursor
We controlled the crystallization process of wide band-gap perovskite films by directly adding an anti-solvent into the perovskite precursor.