FHFabian Heck

Fabian Heck

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Fabian Heck has a total of 121 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Deconvoluting the Convoluted: Structural Ramifications of Postsynthetic Linkage Modification in COF-366-Co Catalysts

    by Samuel Van Gele, Amelie Heilmaier, Fabian Heck, Kathrin KüsTer, Armin Schulz, Artem Shevchenko, Liang Yao, Bettina V. Lotsch

    Postsynthetic modification (PSM) is a powerful strategy for modifying properties such as pore environment, stability and catalytic activity in covalent organic frameworks (COFs). While the chemical outcomes of PSMs are well documented, their impact on the underlying crystal lattice is rarely quantified. Yet, when translating modified COF systems toward catalytic applications, such structural changes can impact performance. In this work we interrogate precisely that blind spot for the benchmark electrocatalyst COF-366-Co. We apply three chemical PSM routes to the imine backbone: (i) quinoline cyclization (q-COF-366-Co), (ii) amine reduction (r-COF-366-Co), and (iii) nitrone oxidation (o-COF-366-Co) and investigate chemical as well as structural modifications induced by the functionalization. The catalysts are further investigated toward the electrochemical carbon dioxide reduction reaction in an attempt to decouple the multitude of convoluted aspects that affect catalytic activity, stability and selectivity such as particle size, disorder, strain, catalytic environment, and framework stability. Among the series, q-COF-366-Co showed a higher stability toward CO selectivity over time compared to the pristine COF-366-Co at −0.88 V vs reversible hydrogen electrode (RHE). Investigating q-COF-366-Co further showed, however, that higher functionalization concentrations led to simultaneous increase in disorder and a lower selectivity toward CO during catalysis. This indicates that a balance must be found between functionalization and preservation of crystalline lattice, offering insights into the design importance of maintaining structural coherence when comparing COF-based materials toward applications.

  • Open Access

    Crown Ether–Structured Secondary Coordination Spheres Enable Methane Formation in Cobalt Porphyrin CO2 Electroreduction

    by Christian Wilhelm, Fabian Heck, Ferdinand Pointner, Luca Camuti, Kenichi Endo, Benjamin P. Fingerhut, Bettina V. Lotsch, Ivana Ivanović-Burmazović

    Secondary coordination sphere engineering provides a powerful strategy to control molecular electrocatalysis beyond primary-sphere electronic effects. Here, we report A 2 B 2 -type cobalt porphyrins bearing electron-donating (–NH 2 ) or electron-withdrawing (–NO 2 ) substituents with and without covalently tethered monoaza-crown ether (CE) motifs. Electrochemical studies in homogeneous and heterogeneous media, combined with cation variation, contact-angle analysis, online GC product quantification, 13 C-labeling experiments, and density functional theory (DFT) calculations, were performed to disentangle electronic and secondary-sphere contributions. In aqueous heterogeneous CO 2 electroreduction, CE functionalization induces anodic shifts in onset potential for both substituent series, consistent with electrostatic stabilization of reduced cobalt states by chelated alkali cations. However, only the –NH 2 derivatives exhibit pronounced changes in wettability, catalytic current, and product distribution. In these systems, CO selectivity decreases in favor of enhanced H 2 evolution, while CH 4 formation increases six-fold relative to the non-functionalized analogue under ambient pressure and near-neutral pH. DFT reveals that CE-cation assemblies preferentially adopt syn conformations, stabilized by cation–π interactions, generating a sterically asymmetric “caged” axial site. This architecture reduces the effective rate of CO 2 association yet kinetically inhibits CO dissociation, enabling further reduction of trapped intermediates to CH 4 . These findings establish cation-organized crown ether confinement as a mechanistic design principle for accessing multielectron CO 2 reduction pathways.

  • Open Access

    Cu–Al Layered Double Hydroxides as Precursors to Operando-Formed Dendritic Cu for Electrochemical CO 2 Reduction

    by Luca Camuti, Fabian Heck, Vera Sprenger, Nadine Weiß, Christian Schneider, Viola Duppel, Reinhard K. Kremer, Sebastian Bette, Bettina V. Lotsch


  • Open Access

    Efficient Organometallic Catalysis of Gas-Phase Olefin Hydrogenation in Solid Solvents

    by Wael Barakat, Fabian Heck, Martina Paetsch, Hassan Shatla, Michael Dyballa, Simon Krause, Bettina V. Lotsch, Deven P. Estes

    Despite the high activities and selectivities of organometallic catalysts for the activation of small molecules in the gas phase, they are less frequently used in industry than heterogeneous catalysts. This is partially due to their dependence on solvents, which can lower the efficiency of gas-phase reactions by a) limiting catalyst and gas solubility, b) making catalyst separation difficult, and c) hindering the rate of gas dissolution. We show that molecular catalysts can be dispersed on the surface of porous solids (which can be thought of as solid solvents) to increase their catalytic activities and longevities. Impregnation of Crabtree’s catalyst ([Ir(COD)(PCy3)(Py)]PF6, 1) into amorphous SiO2, SBA-15, metal-organic framework (MOF) NU-1000, and covalent organic framework (COF) TAPB-DHTA results in catalysts that are universally more active for the selective hydrogenation of ethylene and propylene than in dichloromethane (DCM). This is most likely the result of faster mass transfer of the gases into the solid solvents than into liquid DCM. In addition, Crabtree’s catalyst in solid solvents can be recycled many times without significant deactivation, resulting in a TON of > 17,000 in SBA-15 (vs. ca. 3000 in DCM). The use of tailorable solid solvents for organometallic catalyst could enable their increased application in large-scale gas-phase flow reactors

  • Open Access

    Elucidating the Structure and the Impact of Synthesis Methods on the Flexibility of the Metal‐Organic Framework MIL‐88 A (Fe) During Water Capture

    by Timo Manitz, Fabian Heck, Sri Rezeki, Kristina Gjorgjevikj, Shun Tokuda, Sebastian Bette, Stefano Canossa, Desirée Leistenschneider, Simon Krause

    Flexible metal‐organic frameworks (MOFs) have emerged as a new generation of porous materials and are considered for various applications such as sensing, water or gas capture, and water purification. MIL−88 A (Fe) is one of the earliest and most researched flexible MOFs, but to date, there is a lack in the structural aspects that govern its dynamic behaviour. Here, we report the first crystal structure of DMF‐solvated MIL−88 A and investigate the impact of real structure effects on the dynamic behaviour of MIL−88 A (Fe), particularly upon water adsorption. Four differently synthesized materials are studied with powder X‐ray diffraction (PXRD), THz Raman spectroscopy, and N 2 sorption. The very high water vapor sorption capacity is probed by utilizing in situ humidity PXRD and calorimetric cycling studies. At least four different crystallographic phases are identified during the sorption measurements and a structural concept and models are developed that explain the changes in the XRD patterns. From this, it is derived that MIL−88 A (Fe) is an excellent material for a new concept of responsive water harvesting technologies.


  • Open Access

    Covalent Organic Framework–Carbon Nanotube Core–Shell Nanohybrids for Enhanced Catalytic Site Utilization of Molecular Catalysts in CO2 Electroreduction

    by Liang Yao, Andres Rodríguez-Camargo, Roman Guntermann, Fabian Heck, Samuel Van Gele, Hugo Vignolo-González, Viola Duppel, Thomas Bein, Bettina Lotsch

    Developing strategies to enhance the utilization efficiency of catalytic sites in molecular catalysts has garnered increasing research interest in the field of molecular heterogeneous catalysis. The primary challenges in achieving this goal lie in the aggregation-induced site inaccessibility and the inherently poor electronic conductivity of molecular catalysts. Here, we present the synthesis of covalent organic framework-carbon nanotube (COF-CNT) core-shell nanohybrids as a platform to improve the site utilization of molecular catalysts in electrochemical CO2 reduction. By leveraging a colloidal COF synthesis approach, COF shells with a thickness of 50–80 nm are uniformly grown on CNTs, ensuring a well-defined morphology with pores oriented perpendicularly to the CNT basal plane. The incorporation of molecular catalysts with COF-CNT nanohybrids enables their application as scaffolds with a channelling function in the electrochemical CO2 reduction. The best-performing sample exhibits a two-orders-of-magnitude increase in CO turnover frequency (TOF) compared to both pristine CoTPyP and COF-366-Co, thus underscoring the effectiveness of the COF-CNT hybrid structure in optimizing catalytic site accessibility. The enhanced site utilization is further validated in other molecular catalyst systems, where exceptionally high TOF values—among the highest reported to date for electrochemical CO2-to-CO conversion—were achieved. Collectively, this study establishes COF-CNT nanohybrids as a promising strategy for advancing COF-based electrocatalysts and facilitating molecular catalyst applications in electrochemical energy conversion.

  • Open Access

    Author Correction: Synthesis of micrometre-thick oriented 2D covalent organic framework films by a kinetic polymerization pathway

    by Luca Cusin, Piotr Cieciórski, Samuel Van Gele, Fabian Heck, Simon Krause, Pawel W. Majewski, Bettina V. Lotsch, Wojciech Danowski, Paolo Samorì


  • Open Access

    Elucidating the structure and the impact of synthesis methods on the flexibility of MIL 88 A (Fe) during water capture

    by Timo Manitz, Fabian Heck, Kristina Gjorgjevikj, Shun Tokuda, Sebastian Bette, Stefano Canossa, Sri Rezeki, Desiree Leistenschneider, Simon Krause

    Flexible metal-organic frameworks (MOFs) have emerged as a new generation of porous materials and are considered for various applications such as sensing, water or gas capture, and water purification. MIL-88 A (Fe) is one of the earliest and most researched flexible MOFs but to date there is a lack in the structural aspects that govern its dynamic behaviour. Here, we report the first crystal structure and investigate the impact of real structure effects on the dynamic behaviour of MIL 88 A (Fe), particularly upon water adsorption. We investigate four differently synthesized materials with powder X-ray diffraction (PXRD), THz Raman spectroscopy, and N2-sorption. We probe the very high water vapor sorption capacity by utilizing in situ humidity PXRD and calorimetric cycling studies. We identify at least four different crystallographic phases during the sorption measurements and develop a structural concept and models that explains the changes in the XRD patterns. From this we derive that MIL-88 A (Fe) is an excellent material for a new concept of responsive water harvesting technologies.

  • Open Access

    Synthesis of micrometre-thick oriented 2D covalent organic framework films by a kinetic polymerization pathway

    by Luca Cusin, Piotr Cieciórski, Samuel Van Gele, Fabian Heck, Simon Krause, Pawel W. Majewski, Bettina V. Lotsch, Wojciech Danowski, Paolo Samorì

    Despite advances in the field of 2D polymerization, the synthesis of high-quality, micron-thick films of oriented 2D covalent organic frameworks (COFs) remains challenging. Conventional approaches focusing on thermodynamic control of the polymerization pathway face a detrimental trade-off between orientation and thickness. In this study, we describe a straightforward method for preparing imine-linked 2D COF films with a near-perfect face-on orientation by leveraging kinetically-trapped amorphous 3D covalent adaptable network (CAN) intermediates. These off-pathway intermediates are generated as coatings through solution casting, during which the CANs spontaneously align to relax tensile stresses induced by solvent evaporation. A subsequent lift-off process, followed by an amorphous-to-crystalline transformation under solvothermal conditions, converts the 3D-oriented polymer networks into thermodynamically stable, porous, and free-standing 2D COF films. This versatile kinetic trapping strategy is suitable for a range of building blocks and network topologies, constituting a convenient synthetic tool for accessing high-quality, robust, large-area 2D COF films with a strongly aligned polycrystalline structure.

  • Open Access

    Synthesis of micrometre-thick oriented 2D covalent organic framework films by a kinetic polymerization pathway

    by Luca Cusin, Piotr Cieciórski, Samuel Van Gele, Fabian Heck, Simon Krause, Pawel W. Majewski, Bettina V. Lotsch, Wojciech Danowski, Paolo Samorì

    Despite advances in the field of 2D polymerization, the synthesis of high-quality, micrometre-thick films of oriented 2D covalent organic frameworks (COFs) remains challenging. Conventional approaches focusing on thermodynamic control of the polymerization pathway face a detrimental trade-off between orientation and thickness. Here we describe a straightforward method for preparing imine-linked 2D COF films with a near-perfect face-on orientation by leveraging kinetically trapped amorphous 3D covalent adaptable network (CAN) intermediates. These off-pathway intermediates are generated as coatings through solution casting, during which the CANs spontaneously align to relax tensile stresses induced by solvent evaporation. A subsequent lift-off process, followed by an amorphous-to-crystalline transformation under solvothermal conditions, converts the 3D-oriented polymer networks into thermodynamically stable, porous and free-standing 2D COF films. This versatile kinetic trapping strategy is suitable for a range of building blocks and network topologies, constituting a convenient synthetic tool for accessing high-quality, robust, large-area 2D COF films with a strongly aligned polycrystalline structure.