Cristiano Tarchiani
Research Subjects
Cristiano Tarchiani has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Maurizio Mele
ENI S.p.A
2 shared publications Alessandro Cossa
Eni S.p.A.
1 shared publicationClaudio Musca
Eni S.p.A.
1 shared publicationElena Manassero
Eni S.p.A.
1 shared publication- Fabio Ciabarri
Edison RD&I, Milan, Italy.;.
1 shared publication - Filippo Chinellato
ENI S.p.A
1 shared publication
Latest Publications
- 1 June 2023
- Published by Society of Petroleum Engineers (SPE) in SPE Reservoir Evaluation & Engineering
- Vol. 26 (04) , 1224-1241
Real-Time Rock-Properties Estimation for Geosteering: Statistical Rock-Physics-Driven Inversion of Seismic Acoustic Impedance and LWD Ultradeep Azimuthal Resistivity
Summary: This work describes a statistical rock-physics-driven inversion of seismic acoustic impedance (AI) and ultradeep azimuthal resistivity (UDAR) log data, acquired while drilling, to estimate porosity, water saturation, and facies classes around the wellbore. Despite their limited resolution, seismic data integrated with electromagnetic resistivity log measurements improve the description of rock properties by considering the coupled effects of pore space and fluid saturation in the joint acoustic and electrical domains. The proposed inversion does not explicitly use a forward model, rather the correlation between the petrophysical properties and the resulting geophysical responses is inferred probabilistically from a training data set. The training set is generated by combining available borehole information with a statistical rock-physics modeling approach. In the inversion process, given colocated measurements of seismic AI and logging-while-drilling (LWD) electromagnetic resistivity data, the pointwise probability distribution of rock properties is derived directly from the training data set by applying the kernel density estimation (KDE) algorithm. A nonparametric statistical approach is used to approximate nonsymmetric volumetric distributions of petrophysical properties and to consider the characteristic nonlinear relationship linking water saturation with resistivity. Given an a priori facies classification template for the samples in the training set, it is possible to model the multimodal, facies-dependent behavior of the petrophysical properties, together with their distinctive correlation patterns. A facies-dependent parameterization allows the effect of lithology on acoustic and resistivity responses to be implicitly considered, even though the target properties of inversion are only porosity and saturation. To provide a realistic uncertainty quantification of the estimated rock properties, a plain Bayesian framework is described to account for rock-physics modeling error and to propagate seismic and resistivity data uncertainties to the inversion results. In this respect, the uncertainty related to the scale difference among the well-log data and seismic is addressed by adopting a scale reconciliation strategy. The main feature of the described inversion lies in its fast implementation based on a look-up table that allows rock properties, with their associated uncertainty, to be estimated in real time following the acquisition and inversion of UDAR data. This gives a robust, straightforward, and fast approach that can be effortlessly integrated into existing workflows to support geosteering operations. The inversion is validated on a clastic oil-bearing reservoir, where geosteering was used to guide the placement of a horizontal appraisal well in a complex structural setting. The results show that the proposed methodology provides realistic estimates of the rock-property distributions around the wellbore to depths of investigation of 50 m. These constitute useful information to drive geosteering decisions and can also be used, post-drilling, to update or optimize existing reservoir models.
- 1 June 2023
- Published by Society of Petroleum Engineers (SPE) in SPE Reservoir Evaluation & Engineering
- Vol. 26 (04) , 1224-1241
Real-Time Rock-Properties Estimation for Geosteering: Statistical Rock-Physics-Driven Inversion of Seismic Acoustic Impedance and LWD Ultradeep Azimuthal Resistivity
Summary: This work describes a statistical rock-physics-driven inversion of seismic acoustic impedance (AI) and ultradeep azimuthal resistivity (UDAR) log data, acquired while drilling, to estimate porosity, water saturation, and facies classes around the wellbore. Despite their limited resolution, seismic data integrated with electromagnetic resistivity log measurements improve the description of rock properties by considering the coupled effects of pore space and fluid saturation in the joint acoustic and electrical domains. The proposed inversion does not explicitly use a forward model, rather the correlation between the petrophysical properties and the resulting geophysical responses is inferred probabilistically from a training data set. The training set is generated by combining available borehole information with a statistical rock-physics modeling approach. In the inversion process, given colocated measurements of seismic AI and logging-while-drilling (LWD) electromagnetic resistivity data, the pointwise probability distribution of rock properties is derived directly from the training data set by applying the kernel density estimation (KDE) algorithm. A nonparametric statistical approach is used to approximate nonsymmetric volumetric distributions of petrophysical properties and to consider the characteristic nonlinear relationship linking water saturation with resistivity. Given an a priori facies classification template for the samples in the training set, it is possible to model the multimodal, facies-dependent behavior of the petrophysical properties, together with their distinctive correlation patterns. A facies-dependent parameterization allows the effect of lithology on acoustic and resistivity responses to be implicitly considered, even though the target properties of inversion are only porosity and saturation. To provide a realistic uncertainty quantification of the estimated rock properties, a plain Bayesian framework is described to account for rock-physics modeling error and to propagate seismic and resistivity data uncertainties to the inversion results. In this respect, the uncertainty related to the scale difference among the well-log data and seismic is addressed by adopting a scale reconciliation strategy. The main feature of the described inversion lies in its fast implementation based on a look-up table that allows rock properties, with their associated uncertainty, to be estimated in real time following the acquisition and inversion of UDAR data. This gives a robust, straightforward, and fast approach that can be effortlessly integrated into existing workflows to support geosteering operations. The inversion is validated on a clastic oil-bearing reservoir, where geosteering was used to guide the placement of a horizontal appraisal well in a complex structural setting. The results show that the proposed methodology provides realistic estimates of the rock-property distributions around the wellbore to depths of investigation of 50 m. These constitute useful information to drive geosteering decisions and can also be used, post-drilling, to update or optimize existing reservoir models.
- 3 June 2019
- Published by Society of Petroleum Engineers (SPE)
New Geosteering Technology Boosts Wellbore Data and Seismic Properties Integration: A Case History From Norway
In a deep-water green field's development, horizontal wells are drilled to exploit the reservoir with the aim of reducing drilling cost and time to first oil. During geosteering operations, Ultra Deep Azimuthal Electro-Magnetic (E.M.) measurements permit investigating the reservoir around the borehole up to a maximum depth of 30 m, in a good resistivity contrast environment. Acquired data are inverted on a vertical section, providing multi-boundary reservoir mapping along well path. With such a depth of investigation, the reservoir mapping is an excellent bridge between conventional logging-while-drilling (LWD) and seismic images. The integration of acquired wellbore data with high-resolution attributes, from seismic inversion, maximizes well placement results when operating in complex subsurface geology and expands the perspectives of geosteering application. A workflow to calibrate the reservoir structural and stratigraphyc setting has been assessed, via integration of seismic and Borehole Data. Enhancement of reservoir geometry interpretation during geosteering provides revised structural surfaces suitable for a quick update of the velocity model and a depth-calibration of all the seismic attributes used to steer wells. We describe an application of the workflow to an infill well, targeting channel and crevasse splays deposits drilled through a structurally complex oil field in the Norwegian offshore. The availability of seismic attributes (probabilities of facies and petrophysical properties) allowed improving the overall results of the well placement operation. Reservoir mapping identifies in real time Geo-bodies crossed by the well and within the range of investigation of Ultra Deep E.M. tool based on tool configuration, frequencies analysed and resistivity contrasts of the rocks. Stratigraphic correlation with offset wells, using conventional LWD data supported by Image Log interpretation, allowed allocating resistivity boundaries in terms of stratigraphic surfaces. These data are then integrated in near real time to depth calibrate maps, update the velocity model, hence the depth image of seismic attributes. After depth calibration, Geo-bodies recognized on seismic show a good correspondence with those identified on the resistivity inversion and a detailed correlation of the heterogeneous fluvial sand was possible, even in presence of minor faults. In this challenging structural and stratigraphic environment, the correlation supported decision making during well operations to target the well on the pay sand. The application proves that a detailed stratigraphic interpretation is an achievable goal in real time to steer successfully the well and to be used afterwards in a detailed reservoir model update.
- 3 June 2019
- Published by Society of Petroleum Engineers (SPE)
New Geosteering Technology Boosts Wellbore Data and Seismic Properties Integration: A Case History From Norway
In a deep-water green field's development, horizontal wells are drilled to exploit the reservoir with the aim of reducing drilling cost and time to first oil. During geosteering operations, Ultra Deep Azimuthal Electro-Magnetic (E.M.) measurements permit investigating the reservoir around the borehole up to a maximum depth of 30 m, in a good resistivity contrast environment. Acquired data are inverted on a vertical section, providing multi-boundary reservoir mapping along well path. With such a depth of investigation, the reservoir mapping is an excellent bridge between conventional logging-while-drilling (LWD) and seismic images. The integration of acquired wellbore data with high-resolution attributes, from seismic inversion, maximizes well placement results when operating in complex subsurface geology and expands the perspectives of geosteering application. A workflow to calibrate the reservoir structural and stratigraphyc setting has been assessed, via integration of seismic and Borehole Data. Enhancement of reservoir geometry interpretation during geosteering provides revised structural surfaces suitable for a quick update of the velocity model and a depth-calibration of all the seismic attributes used to steer wells. We describe an application of the workflow to an infill well, targeting channel and crevasse splays deposits drilled through a structurally complex oil field in the Norwegian offshore. The availability of seismic attributes (probabilities of facies and petrophysical properties) allowed improving the overall results of the well placement operation. Reservoir mapping identifies in real time Geo-bodies crossed by the well and within the range of investigation of Ultra Deep E.M. tool based on tool configuration, frequencies analysed and resistivity contrasts of the rocks. Stratigraphic correlation with offset wells, using conventional LWD data supported by Image Log interpretation, allowed allocating resistivity boundaries in terms of stratigraphic surfaces. These data are then integrated in near real time to depth calibrate maps, update the velocity model, hence the depth image of seismic attributes. After depth calibration, Geo-bodies recognized on seismic show a good correspondence with those identified on the resistivity inversion and a detailed correlation of the heterogeneous fluvial sand was possible, even in presence of minor faults. In this challenging structural and stratigraphic environment, the correlation supported decision making during well operations to target the well on the pay sand. The application proves that a detailed stratigraphic interpretation is an achievable goal in real time to steer successfully the well and to be used afterwards in a detailed reservoir model update.