Pharatree Jaita
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pharatree Jaita has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Parkpoom Jarupoom
5 shared publicationsAnucha Watcharapasorn
4 shared publicationsOrawan Khamman
4 shared publications- Parkpoom Jarupoom
Department of Industrial Engineering, Faculty of Engineering, Rajamangala University of Technology Lanna (RMUTL), Chiang Mai 50300, Thailand
4 shared publications Pimpilai Wannasut
4 shared publications- Anucha Watcharapasorn
Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai, Thailand
3 shared publications
Latest Publications
- 21 April 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (14) , 27522-27540
Synergistic enhancement of electrostrain and energy storage performance in (Fe, Nb) co-doped (Bi0.47Ba0.02Sr0.01Na0.40K0.10)TiO3 lead-free piezoelectric ceramics
- 21 April 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (14) , 27522-27540
Synergistic enhancement of electrostrain and energy storage performance in (Fe, Nb) co-doped (Bi0.47Ba0.02Sr0.01Na0.40K0.10)TiO3 lead-free piezoelectric ceramics
- Open Access
- 25 January 2026
- Published by Springer Nature in Journal of Materials Science
- Vol. 61 (8) , 5579
Correction: Optimizing energy harvesting and electrostrain performances of eco-friendly (Bi0.49Sr0.01Na0.40K0.10TiO3)-based ceramics via designed thermal treatment
- 25 January 2026
- Published by Springer Nature in Journal of Materials Science
- Vol. 61 (8) , 5579
Open AccessCorrection: Optimizing energy harvesting and electrostrain performances of eco-friendly (Bi0.49Sr0.01Na0.40K0.10TiO3)-based ceramics via designed thermal treatment
- 19 December 2025
- Published by Springer Nature in Journal of Materials Science
- Vol. 61 (5) , 3190-3210
Optimizing energy harvesting and electrostrain performances of eco-friendly (Bi0.49Sr0.01Na0.40K0.10TiO3)-based ceramics via designed thermal treatment
- 19 December 2025
- Published by Springer Nature in Journal of Materials Science
- Vol. 61 (5) , 3190-3210
Optimizing energy harvesting and electrostrain performances of eco-friendly (Bi0.49Sr0.01Na0.40K0.10TiO3)-based ceramics via designed thermal treatment
- 12 November 2024
- Published by Springer Nature in Journal of Electroceramics
- Vol. 53 (2) , 131-152
Improving energy storage density, piezoelectric, and energy harvesting performances of eco-friendly (Bi0.49−xBaxLa0.01Na0.40K0.10)TiO3 ceramics by composition design strategy
- 12 November 2024
- Published by Springer Nature in Journal of Electroceramics
- Vol. 53 (2) , 131-152
Improving energy storage density, piezoelectric, and energy harvesting performances of eco-friendly (Bi0.49−xBaxLa0.01Na0.40K0.10)TiO3 ceramics by composition design strategy
- Open Access
- 4 November 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (48) , 35460-35474
In vitro bioactivity, mechanical, and cell interaction of sodium chloride-added calcium sulfate–hydroxyapatite composite bone cements
In this research, sodium chloride-added calcium sulfate–hydroxyapatite composite bone cements (0.70CaS–0.30HAP)/xNaCl were studied.
- 4 November 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (48) , 35460-35474
Open AccessIn vitro bioactivity, mechanical, and cell interaction of sodium chloride-added calcium sulfate–hydroxyapatite composite bone cements
In this research, sodium chloride-added calcium sulfate–hydroxyapatite composite bone cements (0.70CaS–0.30HAP)/xNaCl were studied.
- Open Access
- 19 July 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (32) , 23286-23302
Enhancing bioactivity and mechanical performances of hydroxyapatite–calcium sulfate bone cements for bone repair: in vivo histological evaluation in rabbit femurs
This study deals with synthesizing hydroxyapatite–calcium sulfate bone cements or HAP–xCaS for bone repair.
- 19 July 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (32) , 23286-23302
Open AccessEnhancing bioactivity and mechanical performances of hydroxyapatite–calcium sulfate bone cements for bone repair: in vivo histological evaluation in rabbit femurs
This study deals with synthesizing hydroxyapatite–calcium sulfate bone cements or HAP–xCaS for bone repair.
- 26 May 2023
- Published by Wiley in Microscopy Research and Technique
- Vol. 86 (7) , 882-897
Enhanced magnetic performance and in‐vitro apatite‐forming ability of the CoFe2O4 doped nano‐hydroxyapatite porous bioceramics
In this research, the bioceramics system of nano‐hydroxyapatite‐cobalt ferrite or Ca10(PO4)6(OH)2/xCoFe2O4 (HAP/xCF), where x = 0–3 vol%, were studied. The effect of CF concentration on phase evolution, physical, microstructure, mechanical, and magnetic properties as well as the in‐vitro apatite‐forming ability and cell culture analysis of the HAP ceramic was investigated. XRD revealed that all HAP/xCF ceramics showed high purity of hydroxyapatite with calcium and phosphate. However, the peak of the CF phase is noted for the HAP + 3 vol% CF ceramic. The densification and mechanical properties (HV, HK, σc, and σf) decreased with increasing the CF additive, which correlated to all HAP/xCF ceramics exhibited porous structure with increasing the percentage of porosity. The average grain size also increased with increasing the CF content. An improvement of magnetic behavior, which increasing of the Mr, Hc, and μB values, was obtained for the higher CF ceramics. In‐vitro apatite‐forming ability test suggested that the HAP + 3 vol% CF porous ceramic has a good apatite‐forming ability. The cell culture analysis indicated that the proliferation of cells was above 97% for the HAP + 3 vol% CF porous ceramic, which means that the prepared ceramic is biocompatible. Based on the obtained results indicated that these ceramics are promising biomedical application candidates.Research Highlights: We fabricated the HAP/xCF ceramics by a simple solid‐state reaction method. The addition of CF into HAP exhibited magnetic improvement and produced the porous ceramic, which caused good apatite‐forming ability. The cell culture analysis indicated that the HAP + 3 vol% CF ceramic is biocompatible.
- 26 May 2023
- Published by Wiley in Microscopy Research and Technique
- Vol. 86 (7) , 882-897
Enhanced magnetic performance and in‐vitro apatite‐forming ability of the CoFe2O4 doped nano‐hydroxyapatite porous bioceramics
In this research, the bioceramics system of nano‐hydroxyapatite‐cobalt ferrite or Ca10(PO4)6(OH)2/xCoFe2O4 (HAP/xCF), where x = 0–3 vol%, were studied. The effect of CF concentration on phase evolution, physical, microstructure, mechanical, and magnetic properties as well as the in‐vitro apatite‐forming ability and cell culture analysis of the HAP ceramic was investigated. XRD revealed that all HAP/xCF ceramics showed high purity of hydroxyapatite with calcium and phosphate. However, the peak of the CF phase is noted for the HAP + 3 vol% CF ceramic. The densification and mechanical properties (HV, HK, σc, and σf) decreased with increasing the CF additive, which correlated to all HAP/xCF ceramics exhibited porous structure with increasing the percentage of porosity. The average grain size also increased with increasing the CF content. An improvement of magnetic behavior, which increasing of the Mr, Hc, and μB values, was obtained for the higher CF ceramics. In‐vitro apatite‐forming ability test suggested that the HAP + 3 vol% CF porous ceramic has a good apatite‐forming ability. The cell culture analysis indicated that the proliferation of cells was above 97% for the HAP + 3 vol% CF porous ceramic, which means that the prepared ceramic is biocompatible. Based on the obtained results indicated that these ceramics are promising biomedical application candidates.Research Highlights: We fabricated the HAP/xCF ceramics by a simple solid‐state reaction method. The addition of CF into HAP exhibited magnetic improvement and produced the porous ceramic, which caused good apatite‐forming ability. The cell culture analysis indicated that the HAP + 3 vol% CF ceramic is biocompatible.
- Open Access
- 3 April 2022
- Published by Taylor & Francis in Journal of Asian Ceramic Societies
- Vol. 10 (2) , 498-513
Enhanced electrical and energy harvesting performances of lead-free BMT modified BNT piezoelectric ceramics
Lead-free (1-x) (Bi0.5Na0.5)TiO3-xBi(Mg0.5Ti0.5)O3 or (1-x)BNT-xBMT (x = 0–0.20) piezoelectric ceramics have been investigated for phase evolution, microstructure, dielectric, ferroelectric, piezoelectric, electric field-induced strain, energy storage density, energy harvesting, and magnetic properties. All compositions exhibited high density sintered ceramics (~ 6.13–6.30 g/cm3). With increasing modifier content, the crystal structure changed from rhombohedral to cubic phase. When BMT content was added, the grain size and Tm were found to increase. The x = 0.05 ceramic showed good piezoelectric (low-field d33 = 159 pC/N) and ferroelectric (Pr = 23.84 µC/cm2, Ec = 34.41 kV/cm) properties. The BMT additive also produced an improvement in electric field-induced strain, energy storage efficiency, and magnetic properties. The highest piezoelectric voltage constant (g33 = 26.29 × 10−3 Vm/N) and the off-resonance figure of merit (FoM) for energy harvesting (~ 4.18 pm2/N) were also obtained for the x = 0.05 ceramic, which was ~ 3.4 times (240%) as compared to the pure BNT ceramic. This suggested that the ceramic has a potential to be one of the promising lead-free piezoelectric candidates for further use in piezoelectric energy harvesting applications.
- 3 April 2022
- Published by Taylor & Francis in Journal of Asian Ceramic Societies
- Vol. 10 (2) , 498-513
Open AccessEnhanced electrical and energy harvesting performances of lead-free BMT modified BNT piezoelectric ceramics
Lead-free (1-x) (Bi0.5Na0.5)TiO3-xBi(Mg0.5Ti0.5)O3 or (1-x)BNT-xBMT (x = 0–0.20) piezoelectric ceramics have been investigated for phase evolution, microstructure, dielectric, ferroelectric, piezoelectric, electric field-induced strain, energy storage density, energy harvesting, and magnetic properties. All compositions exhibited high density sintered ceramics (~ 6.13–6.30 g/cm3). With increasing modifier content, the crystal structure changed from rhombohedral to cubic phase. When BMT content was added, the grain size and Tm were found to increase. The x = 0.05 ceramic showed good piezoelectric (low-field d33 = 159 pC/N) and ferroelectric (Pr = 23.84 µC/cm2, Ec = 34.41 kV/cm) properties. The BMT additive also produced an improvement in electric field-induced strain, energy storage efficiency, and magnetic properties. The highest piezoelectric voltage constant (g33 = 26.29 × 10−3 Vm/N) and the off-resonance figure of merit (FoM) for energy harvesting (~ 4.18 pm2/N) were also obtained for the x = 0.05 ceramic, which was ~ 3.4 times (240%) as compared to the pure BNT ceramic. This suggested that the ceramic has a potential to be one of the promising lead-free piezoelectric candidates for further use in piezoelectric energy harvesting applications.
- Open Access
- 31 January 2022
- Published by Chiang Mai University in Chiang Mai Journal of Science
- Vol. 49 (1) , 39-54
Temperature Dependence on Mechanical, Dielectric, and Electric Field-Induced Strain Properties of Lead-Free BNST Ceramics
Chiang Mai Journal of Science, Faculty of Science, Chiang Mai University
- 31 January 2022
- Published by Chiang Mai University in Chiang Mai Journal of Science
- Vol. 49 (1) , 39-54
Open AccessTemperature Dependence on Mechanical, Dielectric, and Electric Field-Induced Strain Properties of Lead-Free BNST Ceramics
Chiang Mai Journal of Science, Faculty of Science, Chiang Mai University
- 2 January 2021
- Published by Taylor & Francis in Integrated Ferroelectrics
- Vol. 213 (1) , 165-173
Influence of Bismuth Ferrite on Dielectric and Ferroelectric Properties of Strontium Iron Niobate Lead-Free Ceramics
Effects of BiFeO3 (BFO) on the properties of strontium iron niobate, Sr(Fe0.5Nb0.5)O3 ceramics were investigated and synthesized using a conventional solid-state reaction method. X-ray diffraction analysis revealed that all ceramics exhibited a single perovskite structure with orthorhombic symmetry. The x = 0.05 ceramic showed a very high dielectric constant (εr > 40,680 at 1 kHz). By using a complex impedance analysis technique, bulk, grain boundary, and electrode responses were found to affect the dielectric behavior which could be related to the Maxwell–Wagner polarization mechanism. Furthermore, ferroelectric behavior was also found to improve for a higher amount of BFO content.
- 2 January 2021
- Published by Taylor & Francis in Integrated Ferroelectrics
- Vol. 213 (1) , 165-173
Influence of Bismuth Ferrite on Dielectric and Ferroelectric Properties of Strontium Iron Niobate Lead-Free Ceramics
Effects of BiFeO3 (BFO) on the properties of strontium iron niobate, Sr(Fe0.5Nb0.5)O3 ceramics were investigated and synthesized using a conventional solid-state reaction method. X-ray diffraction analysis revealed that all ceramics exhibited a single perovskite structure with orthorhombic symmetry. The x = 0.05 ceramic showed a very high dielectric constant (εr > 40,680 at 1 kHz). By using a complex impedance analysis technique, bulk, grain boundary, and electrode responses were found to affect the dielectric behavior which could be related to the Maxwell–Wagner polarization mechanism. Furthermore, ferroelectric behavior was also found to improve for a higher amount of BFO content.