Jafar Abdullah Ali
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jafar Abdullah Ali has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Loghman Khodakarami
Department of Petroleum Engineering, Faculty of Engineering Koya University Koya Iraq
2 shared publications Aya B. Shawkat
Department of Petroleum Engineering, Faculty of Engineering, Koya University, Danielle Mitterrand Boulevard, Koya KOY45, Kurdistan Region – F.R. Iraq
1 shared publication- Ayad A. Alhaleem
Department of Petroleum Engineering, College of Engineering, University of Baghdad, Baghdad, Iraq
1 shared publication Bala A. Faqe
Department of Petroleum Engineering, Faculty of Engineering, Koya University, Danielle Mitterrand Boulevard, Koya KOY45, Kurdistan Region – F.R. Iraq
1 shared publication- Brosk F. Ali
Chemical and Petrochemical Engineering Department, College of Engineering, Salahaddin University-Erbil, Erbil, Kurdistan Region – F.R. Iraq
1 shared publication - Gardun Mazar
Department of Manufacturing Engineering, Faculty of Engineering, Koya University, Koya, Iraq
1 shared publication
Latest Publications
- Open Access
- 1 February 2025
- Published by Koya University in ARO-THE SCIENTIFIC JOURNAL OF KOYA UNIVERSITY
- Vol. 13 (1) , 185-189
Simulation of Flare Discharged from Oil Fields, Integration of Remote Sensing, Laboratory and Mathematical Models
The prevailing practice in Iraq and the Middle East involves the flaring of gas into the atmosphere by a majority of oil and gas industries. This practice, however, is causing significant harm to the environment, personnel, and equipment. Consequently, determining the optimal location for the flare stack within an oil field has become a primary concern in the design of oil field processes. To address this issue, an in-depth analysis of the flame distribution from oil field flare stacks has been undertaken, focusing on assessing both the size and configuration of the flare. The investigation specifically concentrated on the diffusion of the heat around a flare discharged from a vertically positioned cylindrical pipe into the atmosphere. To facilitate this exploration, a geographic information system was used, and an environmental laboratory experiment was conducted using a scaled flare stack, allowing for measurements under various conditions. During this experiment, thermal images of the flare at different gas flow rates were captured and analyzed using MATLAB software to precisely measure the dimensions and shape of the flare. Consequently, predicting the shape and size of flare profiles becomes possible when key parameters, such as discharge gas flow rate, are known. The overarching objectives of this study are to forecast the shape and size of the flare as well as the diffusion zone, contributing to a more effective and environmentally friendly oil field process design.
- 1 February 2025
- Published by Koya University in ARO-THE SCIENTIFIC JOURNAL OF KOYA UNIVERSITY
- Vol. 13 (1) , 185-189
Open AccessSimulation of Flare Discharged from Oil Fields, Integration of Remote Sensing, Laboratory and Mathematical Models
The prevailing practice in Iraq and the Middle East involves the flaring of gas into the atmosphere by a majority of oil and gas industries. This practice, however, is causing significant harm to the environment, personnel, and equipment. Consequently, determining the optimal location for the flare stack within an oil field has become a primary concern in the design of oil field processes. To address this issue, an in-depth analysis of the flame distribution from oil field flare stacks has been undertaken, focusing on assessing both the size and configuration of the flare. The investigation specifically concentrated on the diffusion of the heat around a flare discharged from a vertically positioned cylindrical pipe into the atmosphere. To facilitate this exploration, a geographic information system was used, and an environmental laboratory experiment was conducted using a scaled flare stack, allowing for measurements under various conditions. During this experiment, thermal images of the flare at different gas flow rates were captured and analyzed using MATLAB software to precisely measure the dimensions and shape of the flare. Consequently, predicting the shape and size of flare profiles becomes possible when key parameters, such as discharge gas flow rate, are known. The overarching objectives of this study are to forecast the shape and size of the flare as well as the diffusion zone, contributing to a more effective and environmentally friendly oil field process design.
- 26 November 2024
- Published by Emerald Publishing in International Journal of Quality & Reliability Management
- Vol. 42 (6) , 1672-1705
Modified FMEA quality risk management technique for cross-country petroleum pipeline using GIS
Purpose: The aim of this study is to employ the failure mode and effect analysis (FMEA) for risk management in cross-country pipelines, coupled with the utilization of Geographic Information System (GIS). The objective is to enhance the significance of the project, considering the potential severe consequences of pipeline failures. These consequences encompass environmental damages, loss of life and disruptions to critical services like energy and water supply. By identifying the most frequent causes of pipeline failures and developing a predictive model, the intention is to contribute toward the prevention of such incidents and minimize their impact.Design/methodology/approach: A total quality management (TQM) technique for risk management; FMEA, was employed in this study integrated with GIS. Eight specific failures were identified and analyzed, exploring their effects and severity, causes and likelihood of occurrence as well as control and detection value. To find the likelihood of occurrence along the pipeline, the GIS was utilized to survey a 10 km wide area along the pipeline of 180 km long. Occurrence spatial mapping for each individual failure was generated. Subsequently, the risk priority number (RPN) was calculated for each failure, presenting the values as separate maps. By overlaying the RPN maps, a final map was generated, illustrating the areas with the highest risk along the pipeline.Findings: A modified risk management model has been developed to detect potential pipeline failures before they escalate into catastrophic events. The results provide a visual representation of the average failure modes along the pipeline, clearly highlighting regions with varying probabilities of failure based on RPN values. The RPN has been meticulously calculated across the entire pipeline, with results presented through both 2D spatial mapping and a comprehensive line graph. This comprehensive approach sets our study apart from others in the field. Our emphasis on a thorough and inclusive risk assessment methodology represents a key novelty in this research. The findings underscore the paramount importance of proactive maintenance and regular inspection practices, with these measures emerging as critical strategies for enhancing the reliability and safety of pipeline infrastructure.Research limitations/implications: This research study aims to enhance the safety and quality of cross-country pipelines. The main limitations of the study include the inability to consider the risks associated with the flow characteristics inside the pipeline and the exclusion of the future master plan from our analysis.Practical implications: The current integrated model is significant for pipeline operative companies and the oil and gas industries. These pipelines are susceptible to failures that can have alarming negative impacts on the environment, human safety and public health. It can improve the quality of risk management and elevate the safety integrity level of their pipelines. Focusing on the high-risk areas, taking action and implementing proactive measures can reduce the risk of failure and improve the safety and reliability of the pipeline system. It utilizes GIS-detailed surveying of the areas along the pipeline without the necessity of making on-site visits.Originality/value: This study introduces a novel framework incorporating FMEA for quality risk management with advanced spatial mapping GIS software. This approach stands out as a unique contribution to the field, as prior studies have not undertaken the comprehensive task of highlighting risks along the entire pipeline using such a sophisticated methodology. This research makes a significant contribution to the field of crude oil transportation through pipelines, ultimately mitigating the risk of undesirable events.
- 26 November 2024
- Published by Emerald Publishing in International Journal of Quality & Reliability Management
- Vol. 42 (6) , 1672-1705
Modified FMEA quality risk management technique for cross-country petroleum pipeline using GIS
Purpose: The aim of this study is to employ the failure mode and effect analysis (FMEA) for risk management in cross-country pipelines, coupled with the utilization of Geographic Information System (GIS). The objective is to enhance the significance of the project, considering the potential severe consequences of pipeline failures. These consequences encompass environmental damages, loss of life and disruptions to critical services like energy and water supply. By identifying the most frequent causes of pipeline failures and developing a predictive model, the intention is to contribute toward the prevention of such incidents and minimize their impact.Design/methodology/approach: A total quality management (TQM) technique for risk management; FMEA, was employed in this study integrated with GIS. Eight specific failures were identified and analyzed, exploring their effects and severity, causes and likelihood of occurrence as well as control and detection value. To find the likelihood of occurrence along the pipeline, the GIS was utilized to survey a 10 km wide area along the pipeline of 180 km long. Occurrence spatial mapping for each individual failure was generated. Subsequently, the risk priority number (RPN) was calculated for each failure, presenting the values as separate maps. By overlaying the RPN maps, a final map was generated, illustrating the areas with the highest risk along the pipeline.Findings: A modified risk management model has been developed to detect potential pipeline failures before they escalate into catastrophic events. The results provide a visual representation of the average failure modes along the pipeline, clearly highlighting regions with varying probabilities of failure based on RPN values. The RPN has been meticulously calculated across the entire pipeline, with results presented through both 2D spatial mapping and a comprehensive line graph. This comprehensive approach sets our study apart from others in the field. Our emphasis on a thorough and inclusive risk assessment methodology represents a key novelty in this research. The findings underscore the paramount importance of proactive maintenance and regular inspection practices, with these measures emerging as critical strategies for enhancing the reliability and safety of pipeline infrastructure.Research limitations/implications: This research study aims to enhance the safety and quality of cross-country pipelines. The main limitations of the study include the inability to consider the risks associated with the flow characteristics inside the pipeline and the exclusion of the future master plan from our analysis.Practical implications: The current integrated model is significant for pipeline operative companies and the oil and gas industries. These pipelines are susceptible to failures that can have alarming negative impacts on the environment, human safety and public health. It can improve the quality of risk management and elevate the safety integrity level of their pipelines. Focusing on the high-risk areas, taking action and implementing proactive measures can reduce the risk of failure and improve the safety and reliability of the pipeline system. It utilizes GIS-detailed surveying of the areas along the pipeline without the necessity of making on-site visits.Originality/value: This study introduces a novel framework incorporating FMEA for quality risk management with advanced spatial mapping GIS software. This approach stands out as a unique contribution to the field, as prior studies have not undertaken the comprehensive task of highlighting risks along the entire pipeline using such a sophisticated methodology. This research makes a significant contribution to the field of crude oil transportation through pipelines, ultimately mitigating the risk of undesirable events.
- Open Access
- 1 January 2024
- Published by University of Human Development in UHD Journal of Science and Technology
- Vol. 8 (1) , 1-12
Investigating the Influence of Environmental Factors on Corrosion in Pipelines Using Geospatial Modeling
This study integrated geographic information system (GIS) and remote sensing technology to identify areas around pipelines that are more susceptible to corrosion having the Kurdistan pipeline as a case study. Geospatial data are used to target factors such as rainfall, temperature, rivers, and minerals which increase the corrosion rate. Spatial data such as, the direction of slope, rainfall, proximity to rivers, and minerals, were collected and analyzed; maps were created for every individual factor to visualize their distribution. By overlaying these maps, regions that are at higher risk of corrosion were identified, which can be prioritized for further investigation or preventive measures. This paper’s findings are significant for oil and gas industries, including pipeline operators and designers as corrosion can lead to devastating consequences. The novelty of this study is to identify areas along the pipeline at higher risk of corrosion through the application of geospatial information systems and remote sensing. This methodology holds immense potential for industries looking to proactively prevent corrosion through the implementation of preventative maintenance, monitoring programs, and the application of protective coatings and inhibitors. The results of this research demonstrate that environmental data, GIS, and remote sensing can predict corrosion in oil pipelines, offering valuable insights for better managing corrosion risk.
- 1 January 2024
- Published by University of Human Development in UHD Journal of Science and Technology
- Vol. 8 (1) , 1-12
Open AccessInvestigating the Influence of Environmental Factors on Corrosion in Pipelines Using Geospatial Modeling
This study integrated geographic information system (GIS) and remote sensing technology to identify areas around pipelines that are more susceptible to corrosion having the Kurdistan pipeline as a case study. Geospatial data are used to target factors such as rainfall, temperature, rivers, and minerals which increase the corrosion rate. Spatial data such as, the direction of slope, rainfall, proximity to rivers, and minerals, were collected and analyzed; maps were created for every individual factor to visualize their distribution. By overlaying these maps, regions that are at higher risk of corrosion were identified, which can be prioritized for further investigation or preventive measures. This paper’s findings are significant for oil and gas industries, including pipeline operators and designers as corrosion can lead to devastating consequences. The novelty of this study is to identify areas along the pipeline at higher risk of corrosion through the application of geospatial information systems and remote sensing. This methodology holds immense potential for industries looking to proactively prevent corrosion through the implementation of preventative maintenance, monitoring programs, and the application of protective coatings and inhibitors. The results of this research demonstrate that environmental data, GIS, and remote sensing can predict corrosion in oil pipelines, offering valuable insights for better managing corrosion risk.
- Open Access
- 1 October 2023
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2594 (1) , 012023
Flow characteristics around the crack in pipeline
Pipelines transport fluids especially petroleum and its products, the transportation process may face some problems due to the defects that can occur in the pipes. Cracks are the main defects that attack the pipes and reduce their performance. It is known that the flow around cracks in pipelines are complicated and affected by various factors, it worth to be considered before decision making on the pipeline integrity. In this study flow characteristics around the crack inside the pipeline has been investigated. The part of the pipe within the crack is the crack zone, where the flow behaviour is different with the rest of the pipe. The work carried out at the laboratory using pipes with different crack length and crude oil with known properties to observe the flow at the crack zone. Then the work theoretically analysed with computational fluid dynamics to model the flow. It is found that the fluid at the crack zone is going to be more viscous lead to accumulation and changes in the characteristics of the flow. The results revealed that the flow characteristics in cracked pipeline with no leakage depend on several factors; the size of the crack, temperature, pressure, velocity and fluid viscosity.
- 1 October 2023
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2594 (1) , 012023
Open AccessFlow characteristics around the crack in pipeline
Pipelines transport fluids especially petroleum and its products, the transportation process may face some problems due to the defects that can occur in the pipes. Cracks are the main defects that attack the pipes and reduce their performance. It is known that the flow around cracks in pipelines are complicated and affected by various factors, it worth to be considered before decision making on the pipeline integrity. In this study flow characteristics around the crack inside the pipeline has been investigated. The part of the pipe within the crack is the crack zone, where the flow behaviour is different with the rest of the pipe. The work carried out at the laboratory using pipes with different crack length and crude oil with known properties to observe the flow at the crack zone. Then the work theoretically analysed with computational fluid dynamics to model the flow. It is found that the fluid at the crack zone is going to be more viscous lead to accumulation and changes in the characteristics of the flow. The results revealed that the flow characteristics in cracked pipeline with no leakage depend on several factors; the size of the crack, temperature, pressure, velocity and fluid viscosity.
- 11 May 2023
- Published by Springer Nature
- p. 147-154
Pressure Minor Losses Coefficient in Cracked Pipelines
- 11 May 2023
- Published by Springer Nature
- p. 147-154
Pressure Minor Losses Coefficient in Cracked Pipelines
- Open Access
- 15 January 2023
- Published by Koya University in ARO-THE SCIENTIFIC JOURNAL OF KOYA UNIVERSITY
- Vol. 11 (1) , 138-142
Drilling Pipe Corrosion Reduction Using Natural, Biodegradable, and Environmentally Friendly Additive to the Drilling Fluid
Corrosion is one of the disasters attacking the drilling tools, particularly the drill pipes. Drilling fluid is the corrosive that increase the rate of corrosion in the pipes. In this study, it is intended to reduce the corrosivity of drilling fluid using a Prosopis farcta powder material. A natural, biodegradable, and environmentally friendly additive is added to the fluid in different particle sizes and amounts to obtain the lowest corrosion rate. Experiments are conducted in a well-like environment (high pressure high temperature filter press) over a wide range of parameters including pressure, temperature, and properties of the drilling fluid under dynamic conditions. The aim is to eliminate or reduce the corrosivity of the mud as well as to control the losses. The results showed a lower corrosion rate, 0.0029 mm/year, using P. farcta material in comparison with those obtained by researchers in the previous studies.
- 15 January 2023
- Published by Koya University in ARO-THE SCIENTIFIC JOURNAL OF KOYA UNIVERSITY
- Vol. 11 (1) , 138-142
Open AccessDrilling Pipe Corrosion Reduction Using Natural, Biodegradable, and Environmentally Friendly Additive to the Drilling Fluid
Corrosion is one of the disasters attacking the drilling tools, particularly the drill pipes. Drilling fluid is the corrosive that increase the rate of corrosion in the pipes. In this study, it is intended to reduce the corrosivity of drilling fluid using a Prosopis farcta powder material. A natural, biodegradable, and environmentally friendly additive is added to the fluid in different particle sizes and amounts to obtain the lowest corrosion rate. Experiments are conducted in a well-like environment (high pressure high temperature filter press) over a wide range of parameters including pressure, temperature, and properties of the drilling fluid under dynamic conditions. The aim is to eliminate or reduce the corrosivity of the mud as well as to control the losses. The results showed a lower corrosion rate, 0.0029 mm/year, using P. farcta material in comparison with those obtained by researchers in the previous studies.
- Open Access
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Polímeros
- Vol. 33 (3) , e20230030
Novel modified blister test to evaluate composites used in repairing cracked pipeline
The traditional method of fixing cracked pipes by welding needs stopping the production. In this study, a composite material is used to repair pipelines without interrupting production, saving both time and money. Hand Layup and vacuum infusion techniques were used to prepare glass strand mat and intra-ply hybrid glass - carbon fibers composites repairs. To show the composites' strength, blister, double cantilever beam, and peel tests were conducted. A novel modified blister test was utilized to show effectiveness of laboratory tests on real pipeline. The results indicate that vacuum infused intra-ply hybrid composite exhibited the highest strength. The experimental results of the best composite were compared with the finite element model under blister test, and the results were found to be identical. The modified blister test on the real pipe provides a better indication about the good strength of the composite repair compared to previous researches.
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Polímeros
- Vol. 33 (3) , e20230030
Open AccessNovel modified blister test to evaluate composites used in repairing cracked pipeline
The traditional method of fixing cracked pipes by welding needs stopping the production. In this study, a composite material is used to repair pipelines without interrupting production, saving both time and money. Hand Layup and vacuum infusion techniques were used to prepare glass strand mat and intra-ply hybrid glass - carbon fibers composites repairs. To show the composites' strength, blister, double cantilever beam, and peel tests were conducted. A novel modified blister test was utilized to show effectiveness of laboratory tests on real pipeline. The results indicate that vacuum infused intra-ply hybrid composite exhibited the highest strength. The experimental results of the best composite were compared with the finite element model under blister test, and the results were found to be identical. The modified blister test on the real pipe provides a better indication about the good strength of the composite repair compared to previous researches.