Yuting Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yuting Yang has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Song Liu
School of Information Science and Technology, ShanghaiTech University, Shanghai, China
6 shared publications - Xiang Fu
School of Information Science and Technology, ShanghaiTech University, Shanghai, China
4 shared publications - Teng Li
School of Electrical and Electronic Engineering, Wuhan Polytechnic University, Wuhan 430048, China
3 shared publications - Youfu F. Li
City University of Hong Kong
3 shared publications - Zhenhuan Sun
School of Information Science and Technology, ShanghaiTech University, Shanghai, China
3 shared publications - Hai Liu
University of Southern California
2 shared publications
Latest Publications
- 25 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 31 (3) , 3142-3153
High Precision Control for Off-Axis In-Situ Rotation of Nanorobot Inside SEM
Robotic rotational nanomanipulation is crucial in fields like nanomaterial defect detection, nanoscale three-dimensional observation, and nanomaterial twisting characterization. In-situ rotation within a scanning electron microscope is challenging due to restricted workspace, limited field of view (FOV), depth of field (DoF), and large position shifts from rotation axis misalignment. Conventional solutions primarily employ nanorobots with extra structures to align the object with the rotation axis. However, this requires additional motion or observation units for the nanorobot, which either occupies multiple linear degrees of freedom or significantly consumes the limited workspace, thereby greatly impeding the dexterity. The novelty of this article resides in developing a control-oriented discrete time state-space model coupled with systematic calibration methodologies for axis and misalignment quantification. Through kinematic modeling rather than dynamic analysis, this approach enables real-time compensation of positional drift via outer-loop control strategies while maintaining compatibility with confined work space. Subsequently, we propose an iterative learning-based controller to enhance the response in subsequent iterations, thereby achieving high-precision off-axis in-situ rotation. Finally, a Barrier Lyapunov Function ensures the end-effector remains within the FOV and DoF, effectively mitigating visual servo singularities. Experimental validation against PID control and model predictive control demonstrates the strategy’s stability, reliability, and superiority.
- 25 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 31 (3) , 3142-3153
High Precision Control for Off-Axis In-Situ Rotation of Nanorobot Inside SEM
Robotic rotational nanomanipulation is crucial in fields like nanomaterial defect detection, nanoscale three-dimensional observation, and nanomaterial twisting characterization. In-situ rotation within a scanning electron microscope is challenging due to restricted workspace, limited field of view (FOV), depth of field (DoF), and large position shifts from rotation axis misalignment. Conventional solutions primarily employ nanorobots with extra structures to align the object with the rotation axis. However, this requires additional motion or observation units for the nanorobot, which either occupies multiple linear degrees of freedom or significantly consumes the limited workspace, thereby greatly impeding the dexterity. The novelty of this article resides in developing a control-oriented discrete time state-space model coupled with systematic calibration methodologies for axis and misalignment quantification. Through kinematic modeling rather than dynamic analysis, this approach enables real-time compensation of positional drift via outer-loop control strategies while maintaining compatibility with confined work space. Subsequently, we propose an iterative learning-based controller to enhance the response in subsequent iterations, thereby achieving high-precision off-axis in-situ rotation. Finally, a Barrier Lyapunov Function ensures the end-effector remains within the FOV and DoF, effectively mitigating visual servo singularities. Experimental validation against PID control and model predictive control demonstrates the strategy’s stability, reliability, and superiority.
- Open Access
- 9 June 2025
- Published by Springer Nature in Research Square
Single-step sound printing of bioadhesive in deep tissue
Bioadhesives and bioadhesion techniques are broadly utilized in clinics and engineering. However, existing bioadhesives, taking the form of liquid, solid, or patches, either require invasive surgical procedure or lack controllability in their delivery process inside the body. Here, we report single-step sound printing (S3P) of bioadhesive, enabling minimally invasive, on-demand, and controllable volumetric printing of biodegradable bioadhesive on deep tissue surfaces in vivo and in situ. Instead of stepwise printing, S3P leverages ultrasound beamforming technique to selectively deposit patterned sound onto tissue surfaces, irreversibly curing the thermosensitive bioadhesive on target position through sonothermal effect by one single step. In contrast to existing ultrasound-based printing techniques relying on super-high sound pressure (35-55 MPa) and/or local temperature (> 70 ℃), S3P prints bioadhesive at the temperature close to that of the body, achieving biosafe and biocompatible sound printing. Moreover, enhanced by sound-induced fluidic streaming, S3P rapidly forms more robust bioadhesion compared with direct thermal curing. We demonstrated the therapeutic efficacy of S3P in minimally invasive gastric perforation repair and locally delivering drugs to tumors. This work explores a new method for delivering bioadhesives inside the body, opening up new chances toward minimally invasive medicine.
- 9 June 2025
- Published by Springer Nature in Research Square
Open AccessSingle-step sound printing of bioadhesive in deep tissue
Bioadhesives and bioadhesion techniques are broadly utilized in clinics and engineering. However, existing bioadhesives, taking the form of liquid, solid, or patches, either require invasive surgical procedure or lack controllability in their delivery process inside the body. Here, we report single-step sound printing (S3P) of bioadhesive, enabling minimally invasive, on-demand, and controllable volumetric printing of biodegradable bioadhesive on deep tissue surfaces in vivo and in situ. Instead of stepwise printing, S3P leverages ultrasound beamforming technique to selectively deposit patterned sound onto tissue surfaces, irreversibly curing the thermosensitive bioadhesive on target position through sonothermal effect by one single step. In contrast to existing ultrasound-based printing techniques relying on super-high sound pressure (35-55 MPa) and/or local temperature (> 70 ℃), S3P prints bioadhesive at the temperature close to that of the body, achieving biosafe and biocompatible sound printing. Moreover, enhanced by sound-induced fluidic streaming, S3P rapidly forms more robust bioadhesion compared with direct thermal curing. We demonstrated the therapeutic efficacy of S3P in minimally invasive gastric perforation repair and locally delivering drugs to tumors. This work explores a new method for delivering bioadhesives inside the body, opening up new chances toward minimally invasive medicine.
- 28 March 2025
- Published by Springer Nature in Nature Physics
- Vol. 21 (5) , 808-816
Acousto-dewetting enables droplet microfluidics on superhydrophilic surfaces
- 28 March 2025
- Published by Springer Nature in Nature Physics
- Vol. 21 (5) , 808-816
Acousto-dewetting enables droplet microfluidics on superhydrophilic surfaces
- 25 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-12
Visual Tracking With Motion Distortion Removal for Nanomanipulation Inside SEM
The paper investigates the problem of visual tracking on moving object in nanomanipulation inside scanning electron microscope (SEM). Image noise is a primary concern when dealing with the problem, which includes the inherent statistical noise and that induced by the motion distortion. A visual tracking method with SEM image denoising algorithm is proposed. The denoising algorithm is well incorporated with robot motion by innovatively leveraging the image Jacobian matrix technique. The denosing algorithm removes image noise and provides more realistic image. On the basis, template matching is utilized to achieve visual tracking on image plane. Experimental results show that the visual tracking performance on image plane was well improved by 31.4% for point feature, 60.6% for line feature, and 52.1% for area feature in terms of root mean square (RMSE) compared to that without motion distortion removal. Comparison experiments validate the state-of-the-art performance achieved by the proposed method and thus the superiority.
- 25 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-12
Visual Tracking With Motion Distortion Removal for Nanomanipulation Inside SEM
The paper investigates the problem of visual tracking on moving object in nanomanipulation inside scanning electron microscope (SEM). Image noise is a primary concern when dealing with the problem, which includes the inherent statistical noise and that induced by the motion distortion. A visual tracking method with SEM image denoising algorithm is proposed. The denoising algorithm is well incorporated with robot motion by innovatively leveraging the image Jacobian matrix technique. The denosing algorithm removes image noise and provides more realistic image. On the basis, template matching is utilized to achieve visual tracking on image plane. Experimental results show that the visual tracking performance on image plane was well improved by 31.4% for point feature, 60.6% for line feature, and 52.1% for area feature in terms of root mean square (RMSE) compared to that without motion distortion removal. Comparison experiments validate the state-of-the-art performance achieved by the proposed method and thus the superiority.
- 13 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 22 (1536125X) , 291-300
Zooming-Free Hand-Eye Self-Calibration for Nanorobotic Manipulation Inside SEM
Nanorobotic manipulation inside Scanning Electron Microscope (SEM) is widely used in nanomaterial characterization and assembly tasks. However, tedious and time-consuming hardware regulations, like axis alignment, are still critical and mandatory to keep the functionality of nanorobot systems. This paper proposes a novel zooming-free hand-eye self-calibration method for nanorobotic manipulation inside SEM to circumvent the hardware regulation problem, which is applicable to a wide range of system configurations. The hand-eye relationship calibration method is based on the active incremental motion of the nanorobot without referring to expensive and complicated calibration patterns. Both perspective projection at low magnification and affine projection at high magnification are modelled, and unified by the image Jacobian matrix technique. With several times active calibration at different magnification factors in advance, the hand-eye relationship can be, thereafter, determined from the model at arbitrary status. The calibration model can be applied to both accurate SEM visual measurement and precision visual servo control. The corresponding methods regarding two-dimensional (2D) measurement, in-plane positioning, and constrained three-dimension (3D) positioning based on the proposed hand-eye relationship model are also presented in this paper. Experiments show that practical contact between robot end-effector and silicon nanowire under 1500× is well established with standard deviation less than one pixel.
- 13 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 22 (1536125X) , 291-300
Zooming-Free Hand-Eye Self-Calibration for Nanorobotic Manipulation Inside SEM
Nanorobotic manipulation inside Scanning Electron Microscope (SEM) is widely used in nanomaterial characterization and assembly tasks. However, tedious and time-consuming hardware regulations, like axis alignment, are still critical and mandatory to keep the functionality of nanorobot systems. This paper proposes a novel zooming-free hand-eye self-calibration method for nanorobotic manipulation inside SEM to circumvent the hardware regulation problem, which is applicable to a wide range of system configurations. The hand-eye relationship calibration method is based on the active incremental motion of the nanorobot without referring to expensive and complicated calibration patterns. Both perspective projection at low magnification and affine projection at high magnification are modelled, and unified by the image Jacobian matrix technique. With several times active calibration at different magnification factors in advance, the hand-eye relationship can be, thereafter, determined from the model at arbitrary status. The calibration model can be applied to both accurate SEM visual measurement and precision visual servo control. The corresponding methods regarding two-dimensional (2D) measurement, in-plane positioning, and constrained three-dimension (3D) positioning based on the proposed hand-eye relationship model are also presented in this paper. Experiments show that practical contact between robot end-effector and silicon nanowire under 1500× is well established with standard deviation less than one pixel.
- 5 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 21 (3) , 3472-3482
Visual Servo Control for Workspace Navigation of Nanorobot End-Effector Inside SEM
Despite of the promising advancements in the last decade, the majority of scanning electron microscope (SEM)-based nanomanipulation tasks remain manually performed. Even in automated tasks, human intervention is required, at least during the task preparatory stage, where both the object of interest and robot end-effector are adequately enclosed in the field of view (FOV) of SEM at moderate magnification. This paper proposes a fully automated visual servo control method for workspace navigation of nanorobot end-effector that actively maintains the end-effector position offset from the center of FOV during passive working scene zooming and translation operations. We also propose using the scaling image Jacobian matrix theory to adaptively establish the hand-eye relationship of the nanorobotic system at uncalibrated magnifications, without the need for hardware regulation. This proposed method for workspace navigation is applicable to almost all commercial nanomanipulation systems. To the authors’ best knowledge, there has been no dedicated research on this problem in the literature. Experiments show that the proposed method significantly improves workspace navigation efficiency by about two-thirds, even for a skilled operator. Note to Practitioners —Workspace navigation refers to the process of moving the FOV to visually enclose the object or feature of interest at a moderate magnification, which is prerequisite for initializing either an automated or manual nanomanipulation task. This process involves consecutive zooming of the SEM in and out, as well as translating the sample stage, which can cause the end-effector to move out of the FOV. Therefore, it is necessary to move the robot end-effector with visual assistance along workspace navigation to avoid unexpected collisions. Typically, skilled operators perform this process manually in almost all nanomanipulation tasks, which is tedious and time-consuming. Therefore, developing an automated visual servo control method for workspace navigation of end-effector will significantly contribute to the nanomanipulation community.
- 5 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 21 (3) , 3472-3482
Visual Servo Control for Workspace Navigation of Nanorobot End-Effector Inside SEM
Despite of the promising advancements in the last decade, the majority of scanning electron microscope (SEM)-based nanomanipulation tasks remain manually performed. Even in automated tasks, human intervention is required, at least during the task preparatory stage, where both the object of interest and robot end-effector are adequately enclosed in the field of view (FOV) of SEM at moderate magnification. This paper proposes a fully automated visual servo control method for workspace navigation of nanorobot end-effector that actively maintains the end-effector position offset from the center of FOV during passive working scene zooming and translation operations. We also propose using the scaling image Jacobian matrix theory to adaptively establish the hand-eye relationship of the nanorobotic system at uncalibrated magnifications, without the need for hardware regulation. This proposed method for workspace navigation is applicable to almost all commercial nanomanipulation systems. To the authors’ best knowledge, there has been no dedicated research on this problem in the literature. Experiments show that the proposed method significantly improves workspace navigation efficiency by about two-thirds, even for a skilled operator. Note to Practitioners —Workspace navigation refers to the process of moving the FOV to visually enclose the object or feature of interest at a moderate magnification, which is prerequisite for initializing either an automated or manual nanomanipulation task. This process involves consecutive zooming of the SEM in and out, as well as translating the sample stage, which can cause the end-effector to move out of the FOV. Therefore, it is necessary to move the robot end-effector with visual assistance along workspace navigation to avoid unexpected collisions. Typically, skilled operators perform this process manually in almost all nanomanipulation tasks, which is tedious and time-consuming. Therefore, developing an automated visual servo control method for workspace navigation of end-effector will significantly contribute to the nanomanipulation community.