Karel Slavíček
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Karel Slavíček has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Dalibor Všianský
Department of Geological Sciences, Faculty of Science, Masaryk University, Brno, Czech Republic
6 shared publications - Jan Petřík
Masaryk University
4 shared publications - Antonín Přichystal
Masaryk University
3 shared publications - Dana Menoušková3 shared publications
Dalibor Všianský
2 shared publications- Jan Volf
Czech Academy of Sciences, Prague, Czech Republic
2 shared publications
Latest Publications
- 30 December 2025
- Published by Archeologicky ustav AV CR, Brno, v. v. i.
From clay to kiln
The publication offers a comprehensive insight into the technology of high medieval pottery production in Central Europe (1250–1400), based on a multidisciplinary analysis of kiln loads from archaeologically investigated pottery kilns in the Bohemian-Moravian Highlands, eastern Moravia, and Lower Austria, complemented by the results of 12 seasons of experimental archaeology covering all stages of the production chain. Analyses of ceramic fabrics confirm their predominantly local origin while also revealing a preference for specific material properties. Within the forming process, four transitional phases in the involvement of rotational kinetic energy during coil-based vessel production were identified and experimentally verified. The results of experimental firings helped reconstruct both the operational use of the studied kilns and the production of ceramics corresponding to medieval wares. The book provides new insights into the topography of workshops in different settlement environments and into the social status of potters within the broader European context.
- 30 December 2025
- Published by Archeologicky ustav AV CR, Brno, v. v. i.
From clay to kiln
The publication offers a comprehensive insight into the technology of high medieval pottery production in Central Europe (1250–1400), based on a multidisciplinary analysis of kiln loads from archaeologically investigated pottery kilns in the Bohemian-Moravian Highlands, eastern Moravia, and Lower Austria, complemented by the results of 12 seasons of experimental archaeology covering all stages of the production chain. Analyses of ceramic fabrics confirm their predominantly local origin while also revealing a preference for specific material properties. Within the forming process, four transitional phases in the involvement of rotational kinetic energy during coil-based vessel production were identified and experimentally verified. The results of experimental firings helped reconstruct both the operational use of the studied kilns and the production of ceramics corresponding to medieval wares. The book provides new insights into the topography of workshops in different settlement environments and into the social status of potters within the broader European context.
- 9 November 2025
- Published by Springer Nature in Journal of Paleolithic Archaeology
- Vol. 8 (1) , 1-25
Multidisciplinary Analysis of the Engraved Pebble From the Magdalenian Horizon of the Open-Air Site Hošťálkovice II – Hladový vrch (Czech Republic)
- 9 November 2025
- Published by Springer Nature in Journal of Paleolithic Archaeology
- Vol. 8 (1) , 1-25
Multidisciplinary Analysis of the Engraved Pebble From the Magdalenian Horizon of the Open-Air Site Hošťálkovice II – Hladový vrch (Czech Republic)
- Open Access
- 25 July 2025
- Published by Elsevier in Journal of Archaeological Science: Reports
- Vol. 66
Archaeometry of early medieval tuyeres questions the chronology of smelting sites in the Moravian Karst
- 25 July 2025
- Published by Elsevier in Journal of Archaeological Science: Reports
- Vol. 66
Open AccessArchaeometry of early medieval tuyeres questions the chronology of smelting sites in the Moravian Karst
- Open Access
- 3 July 2025
- Published by Springer Nature in Archaeological and Anthropological Sciences
- Vol. 17 (8) , 1-22
Archaeometric Insights into Pre-pottery Neolithic Clay Technologies at Ba`ja, Jordan: Distinguishing Three Types of Clay Objects
Increasing evidence of baked clay vessels at the Final Pre-Pottery Neolithic (FPPNB) sites in Fertile Crescent has challenged the traditional distinction between the Pre-Pottery and Pottery Neolithic periods. This study examines a significant collection of FPPNB clay artefacts from the Ba`ja site, Greater Petra Area, Southern Jordan, found during several excavation seasons, that were registered with the category of Unbaked/baked clay objects. We aim to refine our understanding of the early clay technologies in Ba`ja. Specifically, we seek to determine the extent to which these items represent early pottery forms, and explore their technological and functional characteristics. Our task is to conduct a comprehensive archaeometric analysis of selected samples through macroscopic observation, light microscopy, X-ray fluorescence spectroscopy and X-ray powder diffraction to evaluate their material composition, firing temperatures, and subsequently their potential function. This analysis will help clarify the processes involved in their production and use. Analyses revealed the division of investigated clay artefacts into three groups: daub produced from local material (Type 1); vessel or tabun (oven) fragments, some of them from local soil (Type 2) and sherds of a vessel/vessels that was/were probably imported from outside the region (Type 3). Only Type 2, categorised as vessel or tabun fragments, was intentionally affected by fire. Specifically, Type 2B was exposed to temperatures higher than 700 °C. This research highlights the need for further studies on the regional variations and technological processes of clay artefact production in FPPNB.
- 3 July 2025
- Published by Springer Nature in Archaeological and Anthropological Sciences
- Vol. 17 (8) , 1-22
Open AccessArchaeometric Insights into Pre-pottery Neolithic Clay Technologies at Ba`ja, Jordan: Distinguishing Three Types of Clay Objects
Increasing evidence of baked clay vessels at the Final Pre-Pottery Neolithic (FPPNB) sites in Fertile Crescent has challenged the traditional distinction between the Pre-Pottery and Pottery Neolithic periods. This study examines a significant collection of FPPNB clay artefacts from the Ba`ja site, Greater Petra Area, Southern Jordan, found during several excavation seasons, that were registered with the category of Unbaked/baked clay objects. We aim to refine our understanding of the early clay technologies in Ba`ja. Specifically, we seek to determine the extent to which these items represent early pottery forms, and explore their technological and functional characteristics. Our task is to conduct a comprehensive archaeometric analysis of selected samples through macroscopic observation, light microscopy, X-ray fluorescence spectroscopy and X-ray powder diffraction to evaluate their material composition, firing temperatures, and subsequently their potential function. This analysis will help clarify the processes involved in their production and use. Analyses revealed the division of investigated clay artefacts into three groups: daub produced from local material (Type 1); vessel or tabun (oven) fragments, some of them from local soil (Type 2) and sherds of a vessel/vessels that was/were probably imported from outside the region (Type 3). Only Type 2, categorised as vessel or tabun fragments, was intentionally affected by fire. Specifically, Type 2B was exposed to temperatures higher than 700 °C. This research highlights the need for further studies on the regional variations and technological processes of clay artefact production in FPPNB.
- Open Access
- 10 June 2025
- Published by Institute of Archaeology of the CAS - Prague, v.v.i. in Archeologické rozhledy
- Vol. 77 (2)
A unique stone mould for casting a spearhead from Morkůvky in South Moravia as an example of long-distance import in the Urnfield Period, and its technological contribution
The paper provides a comprehensive analysis of a well-preserved half of a stone mould, accidentally found in the village of Morkůvky (Břeclav District). Although it is a stray find, it is characterised by above-standard informative value from the point of view of both typology and technology, as well as in terms of raw material provenance. According to macroscopic traces and XRF–XRD analyses, bronze was poured into vertically erected halves of the mould, which were tightened with copper wire. The negative reveals that the mould was used to cast a socketed lanceolate spearhead, in which each of the flanking blade wings and the midrib carried a longitudinal rib. This spearhead type is commonly found in the Carpathian Basin and is mostly dated to the Late Bronze Age. The area of its most frequent occurrence thus indicates the Carpathian origin of the mould, which was verified by petrographic analysis. According to its results, the casting mould is made of rhyolite tuff, i.e. a rock that occurs in adequate quantities in northern Hungary. The casting mould from Morkůvky is thus demonstrably the result of long-distance import and further evidence of Carpathian influences in the Middle Danube Urnfield Culture.
- 10 June 2025
- Published by Institute of Archaeology of the CAS - Prague, v.v.i. in Archeologické rozhledy
- Vol. 77 (2)
Open AccessA unique stone mould for casting a spearhead from Morkůvky in South Moravia as an example of long-distance import in the Urnfield Period, and its technological contribution
The paper provides a comprehensive analysis of a well-preserved half of a stone mould, accidentally found in the village of Morkůvky (Břeclav District). Although it is a stray find, it is characterised by above-standard informative value from the point of view of both typology and technology, as well as in terms of raw material provenance. According to macroscopic traces and XRF–XRD analyses, bronze was poured into vertically erected halves of the mould, which were tightened with copper wire. The negative reveals that the mould was used to cast a socketed lanceolate spearhead, in which each of the flanking blade wings and the midrib carried a longitudinal rib. This spearhead type is commonly found in the Carpathian Basin and is mostly dated to the Late Bronze Age. The area of its most frequent occurrence thus indicates the Carpathian origin of the mould, which was verified by petrographic analysis. According to its results, the casting mould is made of rhyolite tuff, i.e. a rock that occurs in adequate quantities in northern Hungary. The casting mould from Morkůvky is thus demonstrably the result of long-distance import and further evidence of Carpathian influences in the Middle Danube Urnfield Culture.
- Open Access
- 10 March 2025
- Published by Springer Nature in Archaeological and Anthropological Sciences
- Vol. 17 (4) , 1-26
Provenance analysis of rock crystal artefacts from Palaeolithic sites in Moravia (East Central Europe) – a comparative extended approach
The Bohemian Massif and the Alps are regions that are generally known for their rock crystal artefacts and the study thereof. The most important archaeological findspots in the Czech Republic are the Palaeolithic sites at Nová Dědina (East Moravia) and in Žitný Cave (Moravian Karst), which yielded numerous rock crystal artefacts. The study of fluid inclusions as sensitive objects reflecting the conditions of their formation was included in the research. Subsequently, natural sites with the occurrence of rock crystals were selected as potential extraction sites, and a comparative study was carried out. The methodological approach has been completed using microthermometry, Raman spectrometry, EPMA and stable isotopic studies of oxygen. The best match of the fluid inclusion assemblage resulted from samples from the Bory-Cyrilov area (West Moravia, the Moldanubicum geological unit) as the rock crystal source for the Nová Dědina Aurignacian site. Unfortunately, no natural sample that would match the artefacts from the Žitný Cave was discovered in terms of the investigated properties. Certain features of the artefacts suggest a possible origin in the Tauern Window region. The inaccessibility of the Alps during large parts of the Palaeolithic and the properties of fluids may point more to the source area of the Moldanubicum. The applied methodological approach clearly shows that the combination of the methods used and the interpretation of their data defines the formation conditions and provides essential information for a discussion of the provenance of the raw material used for rock crystal artefacts.
- 10 March 2025
- Published by Springer Nature in Archaeological and Anthropological Sciences
- Vol. 17 (4) , 1-26
Open AccessProvenance analysis of rock crystal artefacts from Palaeolithic sites in Moravia (East Central Europe) – a comparative extended approach
The Bohemian Massif and the Alps are regions that are generally known for their rock crystal artefacts and the study thereof. The most important archaeological findspots in the Czech Republic are the Palaeolithic sites at Nová Dědina (East Moravia) and in Žitný Cave (Moravian Karst), which yielded numerous rock crystal artefacts. The study of fluid inclusions as sensitive objects reflecting the conditions of their formation was included in the research. Subsequently, natural sites with the occurrence of rock crystals were selected as potential extraction sites, and a comparative study was carried out. The methodological approach has been completed using microthermometry, Raman spectrometry, EPMA and stable isotopic studies of oxygen. The best match of the fluid inclusion assemblage resulted from samples from the Bory-Cyrilov area (West Moravia, the Moldanubicum geological unit) as the rock crystal source for the Nová Dědina Aurignacian site. Unfortunately, no natural sample that would match the artefacts from the Žitný Cave was discovered in terms of the investigated properties. Certain features of the artefacts suggest a possible origin in the Tauern Window region. The inaccessibility of the Alps during large parts of the Palaeolithic and the properties of fluids may point more to the source area of the Moldanubicum. The applied methodological approach clearly shows that the combination of the methods used and the interpretation of their data defines the formation conditions and provides essential information for a discussion of the provenance of the raw material used for rock crystal artefacts.
- Open Access
- 7 March 2025
- Published by Elsevier in Journal of Archaeological Science: Reports
- Vol. 63
Continuity amid transformation: An analysis of pottery production from the late La Tène to early Roman periods in Eastern Bohemia
- 7 March 2025
- Published by Elsevier in Journal of Archaeological Science: Reports
- Vol. 63
Open AccessContinuity amid transformation: An analysis of pottery production from the late La Tène to early Roman periods in Eastern Bohemia
- 13 December 2024
- Published by Archeologicky ustav AV CR, Brno, v. v. i. in Přehled výzkumů
- p. 119-165
Hrnčířské areály ve Starém Městě u Uherského Hradiště: úvod do problematiky místní keramické produkce ve vrcholném středověku
Over the past 50 years, rescue excavations in Staré Město (Old Town) near Uherské Hradiště have unveiled several sites indicative of pottery production from the 13th to the 15th century, including numerous pottery kilns. The focus of this research project is primarily on the shifts in production technology and the sourcing of raw materials. The study has successfully documented the evolution of local ceramic production from traditional methods to those characteristic of the high medieval period. This was achieved through various natural science techniques, which helped identify the use of local Tertiary clays and define the primary typological and morphological characteristics of the regional pottery production.
- 13 December 2024
- Published by Archeologicky ustav AV CR, Brno, v. v. i. in Přehled výzkumů
- p. 119-165
Hrnčířské areály ve Starém Městě u Uherského Hradiště: úvod do problematiky místní keramické produkce ve vrcholném středověku
Over the past 50 years, rescue excavations in Staré Město (Old Town) near Uherské Hradiště have unveiled several sites indicative of pottery production from the 13th to the 15th century, including numerous pottery kilns. The focus of this research project is primarily on the shifts in production technology and the sourcing of raw materials. The study has successfully documented the evolution of local ceramic production from traditional methods to those characteristic of the high medieval period. This was achieved through various natural science techniques, which helped identify the use of local Tertiary clays and define the primary typological and morphological characteristics of the regional pottery production.