Hua Huang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hua Huang has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
Huiyang Huang
School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou, China
4 shared publicationsQianzhi Pang
School of foreign languages, Lanzhou University of technology, Lanzhou, China
4 shared publicationsRunlan Guo
School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou, China
4 shared publicationsJunbo Xin
School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou, China
3 shared publicationsMin Nie
School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou, China
3 shared publicationsWuqiang Li
School of Bailie Mechanical Engineering, Lanzhou City University, Lanzhou, China
3 shared publications
Latest Publications
- 16 October 2026
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 96 (11) , 212
Numerical prediction of effective mechanical properties of microencapsulated self-healing resin mineral composites considering the interfacial phase
- 16 October 2026
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 96 (11) , 212
Numerical prediction of effective mechanical properties of microencapsulated self-healing resin mineral composites considering the interfacial phase
- 30 March 2026
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 144 (1-2) , 791-810
Research on adaptive milling chatter monitoring method based on SD-WPEE and WLS-Burg
- 30 March 2026
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 144 (1-2) , 791-810
Research on adaptive milling chatter monitoring method based on SD-WPEE and WLS-Burg
- 1 September 2025
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- p. 1-17
Investigation on tool wear prediction model based on IW-DBO-GRU
- 1 September 2025
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- p. 1-17
Investigation on tool wear prediction model based on IW-DBO-GRU
- Open Access
- 1 September 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-18
A method for constructing digital twins of CNC machine tools feed systems based on hybrid mechanism-data
Traditional CNC machine tool feed system models suffer from low simulation accuracy and limited generalizability. These issues arise from simplified process replication and rigid optimization methods based on mechanical knowledge. To address these challenges, this study proposes a new hybrid mechanism data-driven digital twin (DT) modeling framework. Firstly, a nonlinear coupling characterization method was developed by combining fuzzy proportional integral (PI) control with mechanical system dynamics. This method achieves real-time adaptive parameter updating of the feeding system, and compared with traditional models, the maximum error is reduced by 32.79%. To further address the inherent simplification characteristics of the mechanism model, a WOA-CNN-LSTM-Attention algorithm was independently constructed for compensation, and experimental verification through physical machine operation confirmed that the maximum error was reduced from 0.0576mm to 0.0121mm. Finally, an online recognition system with a recursive least squares multiplication with a forgetting factor was used to achieve fast parameter convergence: tracking for 0.005 seconds in simple cases and 0.01 seconds in complex cases, achieving real-time DT synchronization. This study provides a systematic solution for building stable and efficient DT systems in precision manufacturing applications.
- 1 September 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-18
Open AccessA method for constructing digital twins of CNC machine tools feed systems based on hybrid mechanism-data
Traditional CNC machine tool feed system models suffer from low simulation accuracy and limited generalizability. These issues arise from simplified process replication and rigid optimization methods based on mechanical knowledge. To address these challenges, this study proposes a new hybrid mechanism data-driven digital twin (DT) modeling framework. Firstly, a nonlinear coupling characterization method was developed by combining fuzzy proportional integral (PI) control with mechanical system dynamics. This method achieves real-time adaptive parameter updating of the feeding system, and compared with traditional models, the maximum error is reduced by 32.79%. To further address the inherent simplification characteristics of the mechanism model, a WOA-CNN-LSTM-Attention algorithm was independently constructed for compensation, and experimental verification through physical machine operation confirmed that the maximum error was reduced from 0.0576mm to 0.0121mm. Finally, an online recognition system with a recursive least squares multiplication with a forgetting factor was used to achieve fast parameter convergence: tracking for 0.005 seconds in simple cases and 0.01 seconds in complex cases, achieving real-time DT synchronization. This study provides a systematic solution for building stable and efficient DT systems in precision manufacturing applications.
- Open Access
- 13 June 2025
- Published by Association for Computing Machinery (ACM)
- p. 218-222
Estimating reference crop evapotranspiration using optimized model in four regions of China
- 13 June 2025
- Published by Association for Computing Machinery (ACM)
- p. 218-222
Open AccessEstimating reference crop evapotranspiration using optimized model in four regions of China
- 20 July 2024
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 94 (10) , 2859-2876
Prediction method for elastic modulus of resin-mineral composites considering the effects of pores and interfacial transition zones
- 20 July 2024
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 94 (10) , 2859-2876
Prediction method for elastic modulus of resin-mineral composites considering the effects of pores and interfacial transition zones
- 30 May 2024
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
- Vol. 32 (5) , 055018
Micro-scale study of microcapsule cracking performance based on XFEM and fluid cavity model
Microcapsule self-healing has become popular for microcrack repairing in resin mineral composites, and the cracking performance of microcapsule directly affect their repair efficiency on the matrix material. In this study, the problem of how the volume of microcapsule core affects the cracking performance of microcapsule is addressed. Based on the extended finite element method, the representative volume element (RVE) considering the volume of microcapsule core is established by combining the cohesive zone model and the fluid cavity model. On this basis, a numerical simulation study of the cracking performance of RVE with different volumes of microcapsule core under dynamic loading is conducted to investigate the triggered cracking process of the fully filled and incompletely filled microcapsules besides their cracking behavior, respectively. This study provides a reference for the preparation of microcapsules and the numerical simulation of microcapsule mechanical properties.
- 30 May 2024
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
- Vol. 32 (5) , 055018
Micro-scale study of microcapsule cracking performance based on XFEM and fluid cavity model
Microcapsule self-healing has become popular for microcrack repairing in resin mineral composites, and the cracking performance of microcapsule directly affect their repair efficiency on the matrix material. In this study, the problem of how the volume of microcapsule core affects the cracking performance of microcapsule is addressed. Based on the extended finite element method, the representative volume element (RVE) considering the volume of microcapsule core is established by combining the cohesive zone model and the fluid cavity model. On this basis, a numerical simulation study of the cracking performance of RVE with different volumes of microcapsule core under dynamic loading is conducted to investigate the triggered cracking process of the fully filled and incompletely filled microcapsules besides their cracking behavior, respectively. This study provides a reference for the preparation of microcapsules and the numerical simulation of microcapsule mechanical properties.
- 3 February 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 238 (13) , 6499-6517
An Integrated Model Based Prediction of Machining Accuracy for Milling Machine
The accuracy of machining can be predicted during the design process of CNC machine tools, while the prediction accuracy depends on the prediction model. However, when establishing the prediction model, the coupling effect among the machine tool’s different components is always ignored for modeling efficiency, so this will lead to its reliability cannot be guaranteed. To address this problem, the model reduction theory and the lumped parameter method are used in this study to set the state-space equations of the essential structural parts. Moreover, the electro-mechanical coupling parameter equation of the servo system is transformed into a state-space equation. Then the state-space equations of the components and the servo system are coupled to establish the machine tool dynamic model. Furthermore, a theoretical model of instantaneous undeformed chip thickness is found, and according to the linear relationship between the micro-cutting force and the instantaneous undeformed chip thickness, the instantaneous cutting force model of the cylindrical milling cutter is established. Based on these, the integrated model, which considers the mechanical structure, control system and cutting force, is obtained and further used in Simulink to build the machining accuracy prediction platform, as well as the accuracy of the integrated prediction model is verified. Moreover, the prediction model established by the integrated modeling method can effectively simulate the actual machining conditions of the machine tool, and the superiority of prediction is confirmed by comparing the simulated and measured results in peripheral milling applications. The results show the error in the system response efficiency is 14.8%, while the error in position accuracy and delay characteristics is less than 10%, the error between the predicted size of the prediction model and the actual size is within 28 μm, a minimum prediction error is 7 μm.
- 3 February 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 238 (13) , 6499-6517
An Integrated Model Based Prediction of Machining Accuracy for Milling Machine
The accuracy of machining can be predicted during the design process of CNC machine tools, while the prediction accuracy depends on the prediction model. However, when establishing the prediction model, the coupling effect among the machine tool’s different components is always ignored for modeling efficiency, so this will lead to its reliability cannot be guaranteed. To address this problem, the model reduction theory and the lumped parameter method are used in this study to set the state-space equations of the essential structural parts. Moreover, the electro-mechanical coupling parameter equation of the servo system is transformed into a state-space equation. Then the state-space equations of the components and the servo system are coupled to establish the machine tool dynamic model. Furthermore, a theoretical model of instantaneous undeformed chip thickness is found, and according to the linear relationship between the micro-cutting force and the instantaneous undeformed chip thickness, the instantaneous cutting force model of the cylindrical milling cutter is established. Based on these, the integrated model, which considers the mechanical structure, control system and cutting force, is obtained and further used in Simulink to build the machining accuracy prediction platform, as well as the accuracy of the integrated prediction model is verified. Moreover, the prediction model established by the integrated modeling method can effectively simulate the actual machining conditions of the machine tool, and the superiority of prediction is confirmed by comparing the simulated and measured results in peripheral milling applications. The results show the error in the system response efficiency is 14.8%, while the error in position accuracy and delay characteristics is less than 10%, the error between the predicted size of the prediction model and the actual size is within 28 μm, a minimum prediction error is 7 μm.
- Open Access
- 27 September 2023
- Published by Elsevier in Computational Particle Mechanics
- Vol. 11 (2) , 853-865
The effect of interfacial strength on the mesoscopic damage characteristics of resin-mineral composite based on PFC3D
- 27 September 2023
- Published by Elsevier in Computational Particle Mechanics
- Vol. 11 (2) , 853-865
Open AccessThe effect of interfacial strength on the mesoscopic damage characteristics of resin-mineral composite based on PFC3D