Martin Henke
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Martin Henke has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Peter Kutne
German Aerospace Center, Institute of Combustion Technology , Pfaffenwaldring 38-40 , Stuttgart 70569, Germany
4 shared publications - Jan Zanger
German Aerospace Center (DLR), Institute of Combustion Technology , Stuttgart 70569, Germany
3 shared publications - Alex Heron-Himmel
German Aerospace Center, Pfaffenwaldring 38-40, Stuttgart 70569, Germany
2 shared publications Anna Marcellan
2 shared publications- Anna Marcellan
German Aerospace Center, Pfaffenwaldring 38-40, Stuttgart 70569, Germany
2 shared publications - Anne G\Xf6Hler-Stroh
Bauhaus Luftfahrt e.V., Willy-Messerschmitt-Str. 1, Taufkirchen 82024, Germany
2 shared publications
Latest Publications
- Open Access
- 20 November 2025
- Published by Elsevier in Energy Conversion and Management: X
- Vol. 29
ProCoSim — A simulation tool for networks of energy facilities
- 20 November 2025
- Published by Elsevier in Energy Conversion and Management: X
- Vol. 29
Open AccessProCoSim — A simulation tool for networks of energy facilities
- Open Access
Development and Testing of a Gas Turbine Test Rig Setup for Demonstrating New Aviation Propulsion Concepts
To further increase efficiency and to significantly reduce climate impact in the aviation sector, new propulsion concepts must be developed. As full electrification in mid- and long-range aviation is impractical due to the low gravimetric energy density of batteries, new approaches must be developed. Therefore, the so-called hybrid electric ground demonstrator (HeBo), equipped with a Rolls Royce M250-C20B gas turbine is set up. The test rig serves as a development platform for various new gas turbine-based propulsion concepts for aviation, such as hybrid electric concepts or a novel cycle concept with steam injection to the combustor, which are described in this paper. The main focus of the work is on the experimental setup and the commissioning of the baseline test rig. This will place the test rig in the context of current research activities and serve as reference for subsequent research results.
Open AccessDevelopment and Testing of a Gas Turbine Test Rig Setup for Demonstrating New Aviation Propulsion Concepts
To further increase efficiency and to significantly reduce climate impact in the aviation sector, new propulsion concepts must be developed. As full electrification in mid- and long-range aviation is impractical due to the low gravimetric energy density of batteries, new approaches must be developed. Therefore, the so-called hybrid electric ground demonstrator (HeBo), equipped with a Rolls Royce M250-C20B gas turbine is set up. The test rig serves as a development platform for various new gas turbine-based propulsion concepts for aviation, such as hybrid electric concepts or a novel cycle concept with steam injection to the combustor, which are described in this paper. The main focus of the work is on the experimental setup and the commissioning of the baseline test rig. This will place the test rig in the context of current research activities and serve as reference for subsequent research results.
- Open Access
The Heat-Storing Micro Gas Turbine—Process Analysis and Experimental Investigation of Effects on Combustion
Renewable energy sources such as wind turbines and photovoltaics are the key to an environmentally friendly energy supply. However, their volatile power output is challenging in regard to supply security. Therefore, flexible energy systems with storage capabilities are crucial for the expansion of renewable energy sources since they allow storing off-demand produced power and reconverting and supplying it on-demand. For this purpose, a novel power plant concept is presented where high-temperature energy storage (HTES) is integrated between the recuperator and the combustor of a conventional micro gas turbine (MGT). It is used to store renewable energy in times of oversupply, which is later used to reduce fuel demand during MGT operation. Hereby, pollutant emissions are reduced significantly, while the power grid is stabilized. This paper presents a numerical process simulation study, aiming to examine the influence of different storage temperatures and load profiles of HTES on the MGT performance (e.g., fuel consumption, efficiency). Furthermore, relevant operating points and their process parameters such as pressures, temperatures, and mass-flow rates are derived. As operation conditions for the combustor are strongly influenced by the HTES, the paper contains a detailed theoretical analysis of the impact on combustor operability and includes an experimental investigation of the first combustor design adapted for the compound and tested under higher inlet temperatures conditions.
Open AccessThe Heat-Storing Micro Gas Turbine—Process Analysis and Experimental Investigation of Effects on Combustion
Renewable energy sources such as wind turbines and photovoltaics are the key to an environmentally friendly energy supply. However, their volatile power output is challenging in regard to supply security. Therefore, flexible energy systems with storage capabilities are crucial for the expansion of renewable energy sources since they allow storing off-demand produced power and reconverting and supplying it on-demand. For this purpose, a novel power plant concept is presented where high-temperature energy storage (HTES) is integrated between the recuperator and the combustor of a conventional micro gas turbine (MGT). It is used to store renewable energy in times of oversupply, which is later used to reduce fuel demand during MGT operation. Hereby, pollutant emissions are reduced significantly, while the power grid is stabilized. This paper presents a numerical process simulation study, aiming to examine the influence of different storage temperatures and load profiles of HTES on the MGT performance (e.g., fuel consumption, efficiency). Furthermore, relevant operating points and their process parameters such as pressures, temperatures, and mass-flow rates are derived. As operation conditions for the combustor are strongly influenced by the HTES, the paper contains a detailed theoretical analysis of the impact on combustor operability and includes an experimental investigation of the first combustor design adapted for the compound and tested under higher inlet temperatures conditions.
- Open Access
- 3 January 2022
- Published by American Institute of Aeronautics and Astronautics (AIAA)
A numerical investigation of the Water-Enhanced Turbofan laboratory-scale ground demonstrator
View Video Presentation: https://doi.org/10.2514/6.2022-0062.vid This paper presents the results of a numerical investigation of a laboratory-scale Water-Enhanced Turbofan (WET) ground demonstrator. The demonstrator is being set up at the German Aerospace Center (DLR) Institute of Combustion Technology to prove the technological feasibility of the novel WET concept at an early stage of development and to gain vital insights for further development. In a WET, water condensation from exhaust gas cooling is captured, pressurized, vaporized via exhaust gas energy and then fed into the combustion chamber. The complexity of the system requires a better understanding of the effects of steam injection and recovery mechanism, both of which are to be studied experimentally on a demonstration test rig. The development of this test rig is supported by a preliminary analysis of the system behavior under different water load conditions. A 0-D model of the test bench is developed, thereby allowing for the numerical investigation of the test bench and its possible configurations, which would support the development process of its main components. This paper presents the test rig, the modelling approach, and the results of the preliminary numerical investigation. The effects of increased pressure drops at the inlet and outlet of the selected gas turbine on critical engine parameters are analyzed, the operation of the bleed valves is investigated, different performance properties for the condenser unit are explored, and, to conclude, the effects of separation channels efficiency in the water recovery unit are examined.
- 3 January 2022
- Published by American Institute of Aeronautics and Astronautics (AIAA)
Open AccessA numerical investigation of the Water-Enhanced Turbofan laboratory-scale ground demonstrator
View Video Presentation: https://doi.org/10.2514/6.2022-0062.vid This paper presents the results of a numerical investigation of a laboratory-scale Water-Enhanced Turbofan (WET) ground demonstrator. The demonstrator is being set up at the German Aerospace Center (DLR) Institute of Combustion Technology to prove the technological feasibility of the novel WET concept at an early stage of development and to gain vital insights for further development. In a WET, water condensation from exhaust gas cooling is captured, pressurized, vaporized via exhaust gas energy and then fed into the combustion chamber. The complexity of the system requires a better understanding of the effects of steam injection and recovery mechanism, both of which are to be studied experimentally on a demonstration test rig. The development of this test rig is supported by a preliminary analysis of the system behavior under different water load conditions. A 0-D model of the test bench is developed, thereby allowing for the numerical investigation of the test bench and its possible configurations, which would support the development process of its main components. This paper presents the test rig, the modelling approach, and the results of the preliminary numerical investigation. The effects of increased pressure drops at the inlet and outlet of the selected gas turbine on critical engine parameters are analyzed, the operation of the bleed valves is investigated, different performance properties for the condenser unit are explored, and, to conclude, the effects of separation channels efficiency in the water recovery unit are examined.
- Open Access
- 16 July 2021
- Published by ASME International
Aero Engine Concepts Beyond 2030: Part 3 \u2014 Experimental Demonstration of Technological Feasibility
Pursuing the targets of the Flightpath 2050 program, i.e. a reduction of 75% in CO~2~ and 90% in NO~x~ emissions, the aviation industry must look beyond the incremental improvement of the conventional gas turbine cycle and consider completely new propulsion concepts. Therefore, a consortium of industrial, academic and national research institutions was formed to investigate and
- 16 July 2021
- Published by ASME International
Open AccessAero Engine Concepts Beyond 2030: Part 3 \u2014 Experimental Demonstration of Technological Feasibility
Pursuing the targets of the Flightpath 2050 program, i.e. a reduction of 75% in CO~2~ and 90% in NO~x~ emissions, the aviation industry must look beyond the incremental improvement of the conventional gas turbine cycle and consider completely new propulsion concepts. Therefore, a consortium of industrial, academic and national research institutions was formed to investigate and
- 13 January 2021
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 143 (2)
Aero Engine Concepts Beyond 2030: Part 3—Experimental Demonstration of Technological Feasibility
Recognizing the attention currently devoted to the environmental impact of aviation, this three-part publication series introduces two new aircraft propulsion concepts for the timeframe beyond 2030. The first part focuses on the novel steam injecting and recovering aero engine concept. In the second part, the free-piston composite cycle engine (FP-CCE) concept is presented. Complementary to the two technical publications, this third part describes the cooperative project, which was initiated by an interdisciplinary consortium, aiming at the demonstration and the proof-of-concept of both aforementioned aero engine concepts. At the beginning of the project, simulations on propulsion, aircraft system, and test bench level will be conducted. On this basis, preliminary tests and fundamental experiments are planned in order to establish a solid basis for the demonstration. Finally, a system demonstration will be carried out at the laboratory level. Thus, the project allows for a final judgment on both the feasibility of the new concepts and the attainability of the requirements for future aircraft propulsion systems.
- 13 January 2021
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 143 (2)
Aero Engine Concepts Beyond 2030: Part 3—Experimental Demonstration of Technological Feasibility
Recognizing the attention currently devoted to the environmental impact of aviation, this three-part publication series introduces two new aircraft propulsion concepts for the timeframe beyond 2030. The first part focuses on the novel steam injecting and recovering aero engine concept. In the second part, the free-piston composite cycle engine (FP-CCE) concept is presented. Complementary to the two technical publications, this third part describes the cooperative project, which was initiated by an interdisciplinary consortium, aiming at the demonstration and the proof-of-concept of both aforementioned aero engine concepts. At the beginning of the project, simulations on propulsion, aircraft system, and test bench level will be conducted. On this basis, preliminary tests and fundamental experiments are planned in order to establish a solid basis for the demonstration. Finally, a system demonstration will be carried out at the laboratory level. Thus, the project allows for a final judgment on both the feasibility of the new concepts and the attainability of the requirements for future aircraft propulsion systems.
- Open Access
- 29 November 2018
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 140 (12)
A Highly Flexible Approach on the Steady-State Analysis of Innovative Micro Gas Turbine Cycles
Steady-state simulation is an important method to investigate thermodynamic processes. This is especially true for innovative micro gas turbine (MGT)-based cycles as the complexity of such systems grows. Therefore, steady-state simulation tools are required that ensure large flexibility and computation robustness. As the increased system complexity result often in more extensive parameter studies also a fast computation speed is required. While a number of steady-state simulation tools for MGT-based systems are described and applied in literature, the solving process of such tools is rarely explained. However, this solving process is crucial to achieve a robust and fast computation within a physically meaningful range. Therefore, a new solver routine for a steady-state simulation tool developed at the DLR Institute of Combustion Technology is presented in detail in this paper. The solver routine is based on Broyden's method. It considers boundaries during the solving process to maintain a physically and technically meaningful solution process. Supplementary methods are implemented and described which improve the computation robustness and speed. Furthermore, some features of the resulting steady-state simulation tool are presented. Exemplary applications of a hybrid power plant (HyPP), an inverted Brayton cycle (IBC), and an aircraft auxiliary power unit (APU) show the capabilities of the presented solver routine and the steady-state simulation tool. It is shown that the new solver routine is superior to the standard Simulink algebraic solver in terms of system evaluation and robustness for the given applications.
- 29 November 2018
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 140 (12)
Open AccessA Highly Flexible Approach on the Steady-State Analysis of Innovative Micro Gas Turbine Cycles
Steady-state simulation is an important method to investigate thermodynamic processes. This is especially true for innovative micro gas turbine (MGT)-based cycles as the complexity of such systems grows. Therefore, steady-state simulation tools are required that ensure large flexibility and computation robustness. As the increased system complexity result often in more extensive parameter studies also a fast computation speed is required. While a number of steady-state simulation tools for MGT-based systems are described and applied in literature, the solving process of such tools is rarely explained. However, this solving process is crucial to achieve a robust and fast computation within a physically meaningful range. Therefore, a new solver routine for a steady-state simulation tool developed at the DLR Institute of Combustion Technology is presented in detail in this paper. The solver routine is based on Broyden's method. It considers boundaries during the solving process to maintain a physically and technically meaningful solution process. Supplementary methods are implemented and described which improve the computation robustness and speed. Furthermore, some features of the resulting steady-state simulation tool are presented. Exemplary applications of a hybrid power plant (HyPP), an inverted Brayton cycle (IBC), and an aircraft auxiliary power unit (APU) show the capabilities of the presented solver routine and the steady-state simulation tool. It is shown that the new solver routine is superior to the standard Simulink algebraic solver in terms of system evaluation and robustness for the given applications.
- Open Access
- 2 November 2016
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 139 (4) , 042601
Introduction of a New Numerical Simulation Tool to Analyze Micro Gas Turbine Cycle Dynamics
Micro gas turbine (MGT) technology is evolving toward a large variety of novel applications, such as weak gas electrification, inverted Brayton cycles, and fuel cell hybrid cycles; however, many of these systems show very different dynamic behaviors compared to conventional MGTs. In addition, some applications impose more stringent requirements on transient maneuvers, e.g., to limit temperature and pressure gradients in a fuel cell hybrid cycle. Besides providing operational safety, optimizing system dynamics to meet the variable power demand of modern energy markets is also of increasing significance. Numerical cycle simulation programs are crucial tools to analyze these dynamics without endangering the machines, and to meet the challenges of automatic control design. For these tasks, complete cycle simulations of transient maneuvers lasting several minutes need to be calculated. Moreover, sensitivity analysis and optimization of dynamic properties like automatic control systems require many simulation runs. To perform these calculations in an acceptable timeframe, simplified component models based on lumped volume or one-dimensional discretization schemes are necessary. The accuracy of these models can be further improved by parameter identification, as most novel applications are modifications of well-known MGT systems and rely on proven, characterized components. This paper introduces a modular in-house simulation tool written in fortran to simulate the dynamic behavior of conventional and novel gas turbine cycles. Thermodynamics, gas composition, heat transfer to the casing and surroundings, shaft rotation and control system dynamics as well as mass and heat storage are simulated together to account for their interactions. While the presented models preserve a high level of detail, they also enable calculation speeds up to five times faster than real-time. The simulation tool is explained in detail, including a description of all component models, coupling of the elements and the ODE solver. Finally, validation results of the simulator based on measurement data from the DLR Turbec T100 recuperated MGT test rig are presented, including cold start-up and shutdown maneuvers.
- 2 November 2016
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 139 (4) , 042601
Open AccessIntroduction of a New Numerical Simulation Tool to Analyze Micro Gas Turbine Cycle Dynamics
Micro gas turbine (MGT) technology is evolving toward a large variety of novel applications, such as weak gas electrification, inverted Brayton cycles, and fuel cell hybrid cycles; however, many of these systems show very different dynamic behaviors compared to conventional MGTs. In addition, some applications impose more stringent requirements on transient maneuvers, e.g., to limit temperature and pressure gradients in a fuel cell hybrid cycle. Besides providing operational safety, optimizing system dynamics to meet the variable power demand of modern energy markets is also of increasing significance. Numerical cycle simulation programs are crucial tools to analyze these dynamics without endangering the machines, and to meet the challenges of automatic control design. For these tasks, complete cycle simulations of transient maneuvers lasting several minutes need to be calculated. Moreover, sensitivity analysis and optimization of dynamic properties like automatic control systems require many simulation runs. To perform these calculations in an acceptable timeframe, simplified component models based on lumped volume or one-dimensional discretization schemes are necessary. The accuracy of these models can be further improved by parameter identification, as most novel applications are modifications of well-known MGT systems and rely on proven, characterized components. This paper introduces a modular in-house simulation tool written in fortran to simulate the dynamic behavior of conventional and novel gas turbine cycles. Thermodynamics, gas composition, heat transfer to the casing and surroundings, shaft rotation and control system dynamics as well as mass and heat storage are simulated together to account for their interactions. While the presented models preserve a high level of detail, they also enable calculation speeds up to five times faster than real-time. The simulation tool is explained in detail, including a description of all component models, coupling of the elements and the ODE solver. Finally, validation results of the simulator based on measurement data from the DLR Turbec T100 recuperated MGT test rig are presented, including cold start-up and shutdown maneuvers.
- 19 August 2013
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 135 (9) , 091203
Inverted Brayton Cycle With Exhaust Gas Recirculation—A Numerical Investigation
Microgas turbine (MGT) based combined heat and power (CHP) units provide a highly efficient, low-pollutant technology to supply heat and electrical power from fossil and renewable energy sources; however, pressurized MGT systems in an electrical power range from 1 to 5 utilize very small turbocharger components. These components suffer from higher losses, like seal and tip leakages, resulting in a reduced electrical efficiency. This drawback is avoided by an inverted Brayton cycle (IBC) based system. In an IBC hot gas is produced in a combustion chamber at atmospheric pressure. Subsequently, the exhaust gas is expanded in a turbine from an atmospheric to a subatmospheric pressure level. In order to increase electrical efficiency, heat from the turbine exhaust gas is recuperated to the combustion air. After recuperation, the gas is compressed to atmospheric pressure and is discharged from the cycle. To decrease the power demand of the compressor, and thereby increasing the electrical cycle efficiency, it is crucial to further extract residual thermal power from the gas before compression. Coolant flows provided by heating applications can use this heat supply combined with heat from the discharged exhaust gas. The low pressure levels of the IBC result in high volumetric gas flows, enabling the use of large, highly efficient turbocharger components. Because of this efficiency benefit and the described cooling demand, micro-CHP applications provide an ideal field for utilization of the IBC. To further increase the total efficiency, discharged exhaust gas can be partially recirculated to the air inlet of the cycle. In the present paper a steady state analysis of an IBC with exhaust gas recirculation (EGR) is shown, and compared to the performance of a conventional Brayton cycle with equivalent component properties. Using EGR, it could be found that the sensitivity of the electrical cycle efficiency to the coolant temperature further increases. The sequent discussion focuses on the trade-off between total efficiency and electrical efficiency, depending on coolant temperature and EGR rate. The results show that EGR can increase the total efficiency by 10% to 15% points, while electrical efficiency decreases by 0.5% to 1% point. If the coolant temperature is below 35 °C, condensation of water vapor in the exhaust gas leads to a further increase of heat recovery efficiency. A validated in-house simulation tool based on turbocharger maps has been used for the calculations.- 19 August 2013
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 135 (9) , 091203
Inverted Brayton Cycle With Exhaust Gas Recirculation—A Numerical Investigation
Microgas turbine (MGT) based combined heat and power (CHP) units provide a highly efficient, low-pollutant technology to supply heat and electrical power from fossil and renewable energy sources; however, pressurized MGT systems in an electrical power range from 1 to 5 utilize very small turbocharger components. These components suffer from higher losses, like seal and tip leakages, resulting in a reduced electrical efficiency. This drawback is avoided by an inverted Brayton cycle (IBC) based system. In an IBC hot gas is produced in a combustion chamber at atmospheric pressure. Subsequently, the exhaust gas is expanded in a turbine from an atmospheric to a subatmospheric pressure level. In order to increase electrical efficiency, heat from the turbine exhaust gas is recuperated to the combustion air. After recuperation, the gas is compressed to atmospheric pressure and is discharged from the cycle. To decrease the power demand of the compressor, and thereby increasing the electrical cycle efficiency, it is crucial to further extract residual thermal power from the gas before compression. Coolant flows provided by heating applications can use this heat supply combined with heat from the discharged exhaust gas. The low pressure levels of the IBC result in high volumetric gas flows, enabling the use of large, highly efficient turbocharger components. Because of this efficiency benefit and the described cooling demand, micro-CHP applications provide an ideal field for utilization of the IBC. To further increase the total efficiency, discharged exhaust gas can be partially recirculated to the air inlet of the cycle. In the present paper a steady state analysis of an IBC with exhaust gas recirculation (EGR) is shown, and compared to the performance of a conventional Brayton cycle with equivalent component properties. Using EGR, it could be found that the sensitivity of the electrical cycle efficiency to the coolant temperature further increases. The sequent discussion focuses on the trade-off between total efficiency and electrical efficiency, depending on coolant temperature and EGR rate. The results show that EGR can increase the total efficiency by 10% to 15% points, while electrical efficiency decreases by 0.5% to 1% point. If the coolant temperature is below 35 °C, condensation of water vapor in the exhaust gas leads to a further increase of heat recovery efficiency. A validated in-house simulation tool based on turbocharger maps has been used for the calculations.