Dariush Zare
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dariush Zare has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Adel Bakhshipour
Department of Biosystems Engineering, Faculty of Agricultural Sciences, University of Guilan, Rasht, Iran
2 shared publications - Mohsen Ranjbaran
Agricultural Engineering Department , Shiraz University , Shiraz , Iran
2 shared publications - Alimohammad Shirzadifar
Department of Biosystems Engineering, Shiraz University, Shiraz, Iran
1 shared publication - Chandra Bhan Singh
Advanced Postharvest Technology Centre, Lethbridge Polytechnic, Lethbridge, Canada
1 shared publication D. S. Jayas
Department of Biosystems Engineering , University of Manitoba , Manitoba, Canada
1 shared publicationG. Chen
1 shared publication
Latest Publications
- Open Access
- 20 January 2025
- Published by Springer Nature in Discover Food
- Vol. 5 (1) , 1-11
Evaluating the influence of air temperature and far-infrared radiation on the physicochemical characteristics of dried rice
- 20 January 2025
- Published by Springer Nature in Discover Food
- Vol. 5 (1) , 1-11
Open AccessEvaluating the influence of air temperature and far-infrared radiation on the physicochemical characteristics of dried rice
- 31 March 2017
- Published by Uniwersytet Przyrodniczy we Wroclawiu in Electronic Journal of Polish Agricultural Universities
- Vol. 20 (1)
A GENERALIZED ARTIFICIAL NEURAL NETWORK MODEL FOR DEEP-BED DRYING OF PADDY
- 31 March 2017
- Published by Uniwersytet Przyrodniczy we Wroclawiu in Electronic Journal of Polish Agricultural Universities
- Vol. 20 (1)
A GENERALIZED ARTIFICIAL NEURAL NETWORK MODEL FOR DEEP-BED DRYING OF PADDY
- Open Access
- 1 December 2013
- Published by Institute of Agrophysics Polish Academy of Sciences in International Agrophysics
- Vol. 27 (4) , 491-494
Physical properties of cumin and caraway seeds
Physical properties of cumin and caraway seeds were measured and compared at constant moisture content of 7.5% w.b. The average thousand mass of grain, mean length, mean width, mean thickness, equivalent diameter, geometric mean diameter, surface area, volume, sphericity, aspect ratio, true density, bulk density and porosity were measured for cumin and caraway. There are significant differences (p
- 1 December 2013
- Published by Institute of Agrophysics Polish Academy of Sciences in International Agrophysics
- Vol. 27 (4) , 491-494
Open AccessPhysical properties of cumin and caraway seeds
Physical properties of cumin and caraway seeds were measured and compared at constant moisture content of 7.5% w.b. The average thousand mass of grain, mean length, mean width, mean thickness, equivalent diameter, geometric mean diameter, surface area, volume, sphericity, aspect ratio, true density, bulk density and porosity were measured for cumin and caraway. There are significant differences (p
- 1 March 2012
- Published by Taylor & Francis in Drying Technology
- Vol. 30 (3) , 236-247
Simulation and Validation of Microwave-Assisted Fluidized Bed Drying of Soybeans
A general mathematical model of heat and mass transfer was developed to simulate the microwave-assisted fluidized bed drying of bulk grain. The model was solved using the well-known Runge-Kutta-Gill method. The model is capable of predicting the moisture content of soybean as well as the drying air parameters (i.e., drying air temperature and moisture content) during drying. The values of mean relative deviation (MRD) were less than 8 and 10% for prediction of grain moisture content and outlet air parameters, respectively, which reflects an acceptable accuracy. In comparison with conventional fluidized bed drying of soybean, microwave-assisted fluidized bed drying led to 83.39–98.07% savings in drying time and 82.07–95.22% savings in specific energy consumption when reducing soybean moisture content from 18.32 to 12% (db).
- 1 March 2012
- Published by Taylor & Francis in Drying Technology
- Vol. 30 (3) , 236-247
Simulation and Validation of Microwave-Assisted Fluidized Bed Drying of Soybeans
A general mathematical model of heat and mass transfer was developed to simulate the microwave-assisted fluidized bed drying of bulk grain. The model was solved using the well-known Runge-Kutta-Gill method. The model is capable of predicting the moisture content of soybean as well as the drying air parameters (i.e., drying air temperature and moisture content) during drying. The values of mean relative deviation (MRD) were less than 8 and 10% for prediction of grain moisture content and outlet air parameters, respectively, which reflects an acceptable accuracy. In comparison with conventional fluidized bed drying of soybean, microwave-assisted fluidized bed drying led to 83.39–98.07% savings in drying time and 82.07–95.22% savings in specific energy consumption when reducing soybean moisture content from 18.32 to 12% (db).
- 30 January 2012
- Published by Taylor & Francis in Drying Technology
- Vol. 30 (4) , 362-376
CFD Modeling of Microwave-Assisted Fluidized Bed Drying of Moist Particles Using Two-Fluid Model
The drying behavior of moist spherical particles in a microwave-assisted fluidized bed dryer was simulated. The two-fluid Eulerian model incorporating the kinetic theory of granular flow was applied to simulate the gas–solid flow. The simulations were carried out using the commercial computational fluid dynamics (CFD) package Fluent 6.3.26. The effects of different levels of microwave power densities as well as initial gas temperature on the prediction of solids moisture content, gas temperature, and gas absolute humidity were investigated. The effect of microwaves was incorporated into calculations using a concatenated user-defined function (UDF). The simulation results were compared with experimental data obtained from drying of soybeans in a pilot-scale microwave-assisted fluidized bed dryer and reasonable agreement was found. The mean relative deviation for prediction of solids moisture content, gas temperature, and gas absolute humidity were less than 3, 10, and 5%, respectively. Further work is needed to validate the proposed model for large-scale plants.
- 30 January 2012
- Published by Taylor & Francis in Drying Technology
- Vol. 30 (4) , 362-376
CFD Modeling of Microwave-Assisted Fluidized Bed Drying of Moist Particles Using Two-Fluid Model
The drying behavior of moist spherical particles in a microwave-assisted fluidized bed dryer was simulated. The two-fluid Eulerian model incorporating the kinetic theory of granular flow was applied to simulate the gas–solid flow. The simulations were carried out using the commercial computational fluid dynamics (CFD) package Fluent 6.3.26. The effects of different levels of microwave power densities as well as initial gas temperature on the prediction of solids moisture content, gas temperature, and gas absolute humidity were investigated. The effect of microwaves was incorporated into calculations using a concatenated user-defined function (UDF). The simulation results were compared with experimental data obtained from drying of soybeans in a pilot-scale microwave-assisted fluidized bed dryer and reasonable agreement was found. The mean relative deviation for prediction of solids moisture content, gas temperature, and gas absolute humidity were less than 3, 10, and 5%, respectively. Further work is needed to validate the proposed model for large-scale plants.
- 1 January 2012
- Published by Taylor & Francis in Drying Technology
- Vol. 30 (1) , 44-51
A Generalized Dimensionless Model for Deep Bed Drying of Paddy
A generalized dimensionless model of paddy drying was developed from a validated partial differential equation (PDE) drying model using the dimensional analysis of Buckingham theorem. This generalized dimensionless model considered all drying parameters in an equation to predict the grain moisture content during the drying process. Statistical parameters, namely, coefficient of determination (R 2), chi-square (χ2), mean relative deviation (MRD), and root mean square error (RMSE), were used as criteria to compare the dimensionless model with a validated PDE model. Based on these calculated parameters, it was concluded that the generalized dimensionless model fitted reasonably well with data from the PDE model and good agreement was found between the generalized dimensionless model and experimental drying data.
- 1 January 2012
- Published by Taylor & Francis in Drying Technology
- Vol. 30 (1) , 44-51
A Generalized Dimensionless Model for Deep Bed Drying of Paddy
A generalized dimensionless model of paddy drying was developed from a validated partial differential equation (PDE) drying model using the dimensional analysis of Buckingham theorem. This generalized dimensionless model considered all drying parameters in an equation to predict the grain moisture content during the drying process. Statistical parameters, namely, coefficient of determination (R 2), chi-square (χ2), mean relative deviation (MRD), and root mean square error (RMSE), were used as criteria to compare the dimensionless model with a validated PDE model. Based on these calculated parameters, it was concluded that the generalized dimensionless model fitted reasonably well with data from the PDE model and good agreement was found between the generalized dimensionless model and experimental drying data.