Jiechao Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jiechao Jiang has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Efstathios Meletis
The University of Texas at Arlington
6 shared publications J. He
Department of Materials Science and Engineering, University of Texas at Arlington, Arlington, TX 76019, USA
4 shared publicationsA. Bhalla
Department of Electrical & Computer Engineering , University of Texas at San Antonio , San Antonio, TX 78249, USA
2 shared publicationsC.L. Chen
Department of Physics and Astronomy , University of Texas at San Antonio , San Antonio, TX 78249, USA
2 shared publicationsG. Collins
Department of Physics and Astronomy , University of Texas at San Antonio , San Antonio, TX 78249, USA
2 shared publications- Jian Liu
National Energy Technology Laboratory
2 shared publications
Latest Publications
- 8 April 2014
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 94 (15) , 1686-1710
Two new superstructures Ba4Ti5O10and Ba4Ti4O11in epitaxial barium titanate nanodomains determined by nanobeam electron diffraction and high-resolution transmission electron microscopy
Barium titanate thin films deposited on MgO (0 0 1) by RF magnetron sputtering are composed of two new superstructures Ba4Ti5O10 and Ba4Ti4O11 formed as epitaxial nanodomain structures. Due to the nanometre scale size of domains and the complexity of the structure in the film, the single-crystal X-ray diffraction technique does not have the capability for the crystallographic structure determination of the two new superstructures. We used nanobeam electron diffraction to reconstruct the three-dimensional diffraction space and hence the symmetry of the new superstructures. Both Ba4Ti5O10 and Ba4Ti4O11 are monoclinic structures with a space group of Cm (b-unique axis). Ba4Ti5O10 has a lattice parameter a = 16.49 Å, b = 3.94 Å, c = 8.94 Å and β = 103°, while Ba4Ti4O11 has a = 17.88 Å, b = 3.94 Å, c = 7.21 Å and β = 98°. Atomic structural models for the two new superstructures were established by reconstructing the high-resolution transmission electron microscopy (HRTEM) images taken from the three major axes and refined by matching the simulated HRTEM images and calculated electron diffraction patterns with the experimental results. The two superstructures are epitaxially grown on MgO with their b-axis parallel to the growth direction.
- 8 April 2014
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 94 (15) , 1686-1710
Two new superstructures Ba4Ti5O10and Ba4Ti4O11in epitaxial barium titanate nanodomains determined by nanobeam electron diffraction and high-resolution transmission electron microscopy
Barium titanate thin films deposited on MgO (0 0 1) by RF magnetron sputtering are composed of two new superstructures Ba4Ti5O10 and Ba4Ti4O11 formed as epitaxial nanodomain structures. Due to the nanometre scale size of domains and the complexity of the structure in the film, the single-crystal X-ray diffraction technique does not have the capability for the crystallographic structure determination of the two new superstructures. We used nanobeam electron diffraction to reconstruct the three-dimensional diffraction space and hence the symmetry of the new superstructures. Both Ba4Ti5O10 and Ba4Ti4O11 are monoclinic structures with a space group of Cm (b-unique axis). Ba4Ti5O10 has a lattice parameter a = 16.49 Å, b = 3.94 Å, c = 8.94 Å and β = 103°, while Ba4Ti4O11 has a = 17.88 Å, b = 3.94 Å, c = 7.21 Å and β = 98°. Atomic structural models for the two new superstructures were established by reconstructing the high-resolution transmission electron microscopy (HRTEM) images taken from the three major axes and refined by matching the simulated HRTEM images and calculated electron diffraction patterns with the experimental results. The two superstructures are epitaxially grown on MgO with their b-axis parallel to the growth direction.
- 15 November 2011
- Published by Springer Nature in Journal of Materials Science
- Vol. 47 (6) , 2763-2769
Nanodomain and interface structure in epitaxial BaTiO3 thin films on MgO deposited by magnetron sputtering
- 15 November 2011
- Published by Springer Nature in Journal of Materials Science
- Vol. 47 (6) , 2763-2769
Nanodomain and interface structure in epitaxial BaTiO3 thin films on MgO deposited by magnetron sputtering
- 24 February 2011
- Published by Taylor & Francis in Philosophical Magazine Letters
- Vol. 91 (5) , 361-374
Evolution of nano-fingers in epitaxial Mn-doped Ba(Zr,Ti)O3 thin films driven by {110} twin boundaries
We report on the evolution of twin-coupled nanofinger structures in epitaxial Mn-doped Ba(Zr,Ti)O3 films on a (001) MgO substrate. XRD studies showed that the films are highly c-axis oriented epitaxial films. TEM and high-resolution TEM studies showed that Mn:BZT films present a pseudo-cubic perovskite structure composed of an epitaxial layer near the interface followed by the formation of twin-coupled nanofingers. The epitaxial grains and the twin-couple domains coexist by sharing their {111} or {110} plane as a common plane. The transition from the epilayer to nanofingers is accomplished by alternatively introducing {111} and {110} plane twin boundaries. This particular process results in gradual reduction of the lateral size of the epitaxial grains and eventually drives the epitaxial structure into twin-coupled nanofingers. The possible atomic structure models for the {110} plane twin boundary are discussed.
- 24 February 2011
- Published by Taylor & Francis in Philosophical Magazine Letters
- Vol. 91 (5) , 361-374
Evolution of nano-fingers in epitaxial Mn-doped Ba(Zr,Ti)O3 thin films driven by {110} twin boundaries
We report on the evolution of twin-coupled nanofinger structures in epitaxial Mn-doped Ba(Zr,Ti)O3 films on a (001) MgO substrate. XRD studies showed that the films are highly c-axis oriented epitaxial films. TEM and high-resolution TEM studies showed that Mn:BZT films present a pseudo-cubic perovskite structure composed of an epitaxial layer near the interface followed by the formation of twin-coupled nanofingers. The epitaxial grains and the twin-couple domains coexist by sharing their {111} or {110} plane as a common plane. The transition from the epilayer to nanofingers is accomplished by alternatively introducing {111} and {110} plane twin boundaries. This particular process results in gradual reduction of the lateral size of the epitaxial grains and eventually drives the epitaxial structure into twin-coupled nanofingers. The possible atomic structure models for the {110} plane twin boundary are discussed.
- 29 July 2009
- Published by Taylor & Francis in Philosophical Magazine Letters
- Vol. 89 (8) , 493-503
Twin-coupled domain structures in epitaxial relaxor ferroelectric Ba(Zr,Ti)O3thin films on (001) MgO substrate
We report the twin-coupled multi-oriented domain structures in the epitaxial BZT20 (20%Zr) films grown on the (001) MgO substrate using pulsed-laser deposition. Transmission electron microscopy shows that the film consists of an epitaxial layer of pseudo-cubic perovskite structure and a nanopillar layer of multi-oriented twin domain structures near the surface. Four types of the twin domains were formed in the nanopillar layers by coherently joining their {111} with the epilayer and aligning their ⟨110⟩ directions parallel to the ⟨110⟩ axes of the epilayer. A non-uniform polarization switching behavior was observed due to the formation of such complex structure in the BZT20 films.
- 29 July 2009
- Published by Taylor & Francis in Philosophical Magazine Letters
- Vol. 89 (8) , 493-503
Twin-coupled domain structures in epitaxial relaxor ferroelectric Ba(Zr,Ti)O3thin films on (001) MgO substrate
We report the twin-coupled multi-oriented domain structures in the epitaxial BZT20 (20%Zr) films grown on the (001) MgO substrate using pulsed-laser deposition. Transmission electron microscopy shows that the film consists of an epitaxial layer of pseudo-cubic perovskite structure and a nanopillar layer of multi-oriented twin domain structures near the surface. Four types of the twin domains were formed in the nanopillar layers by coherently joining their {111} with the epilayer and aligning their ⟨110⟩ directions parallel to the ⟨110⟩ axes of the epilayer. A non-uniform polarization switching behavior was observed due to the formation of such complex structure in the BZT20 films.
- 21 June 2009
- Published by Elsevier in Thin Solid Films
- Vol. 518 (1) , 147-153
Two-dimensional interface structures of epitaxial (Ba,Sr)TiO3 film on miscut (001) MgO
- 21 June 2009
- Published by Elsevier in Thin Solid Films
- Vol. 518 (1) , 147-153
Two-dimensional interface structures of epitaxial (Ba,Sr)TiO3 film on miscut (001) MgO
- 29 January 2007
- Published by AIP Publishing in Applied Physics Letters
- Vol. 90 (5) , 051904
Interface modulated structure of highly epitaxial (Pb,Sr)TiO3 thin films on (001) MgO
The interface of epitaxial films on MgO substrates grown by pulsed laser ablation was studied using transmission electron microscopy (TEM). Cross-section TEM studies revealed that the epitaxial films have a lattice mismatch of with respect to the substrates. Electron diffraction pattern and high-resolution TEM image of the plan-view interface present evidence of a modulated structure on the film plane. This allowed obtaining the actual lattice mismatch of at the interface. Plan-view TEM of the interface is able to provide fundamental information that cannot be obtained by the cross-section TEM alone, and its advantages in studying such epitaxial films are addressed.- 29 January 2007
- Published by AIP Publishing in Applied Physics Letters
- Vol. 90 (5) , 051904
Interface modulated structure of highly epitaxial (Pb,Sr)TiO3 thin films on (001) MgO
The interface of epitaxial films on MgO substrates grown by pulsed laser ablation was studied using transmission electron microscopy (TEM). Cross-section TEM studies revealed that the epitaxial films have a lattice mismatch of with respect to the substrates. Electron diffraction pattern and high-resolution TEM image of the plan-view interface present evidence of a modulated structure on the film plane. This allowed obtaining the actual lattice mismatch of at the interface. Plan-view TEM of the interface is able to provide fundamental information that cannot be obtained by the cross-section TEM alone, and its advantages in studying such epitaxial films are addressed.