CCChin-Ti Chen

Chin-Ti Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Chin-Ti Chen has a total of 79 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Improved efficiency of organic light-emitting diodes with self-assembled molybdenum oxide hole injection layers

    by Chia-Wei Liu, Ming-Chih Tsai, Tsung-Chin Cheng, Yu-Hsuan Ho, Huang-Kuo You, Chia-Shuo Li, Chin-Ti Chen, Chih-I Wu

    In this paper, we demonstrate the use of self-assembly to fabricate solution-processed molybdenum oxide (MoO3) films by simply casting a metal oxide solution onto an indium tin oxide substrate. The self-assembled MoO3 (SA-MoO3) films were used as hole injection layers (HILs) in green phosphorescent organic light-emitting diodes. The devices with SA-MoO3 HILs exhibited nearly double the efficiency of the one made with commonly used evaporated MoO3 (e-MoO3) HILs. This improvement was attributed to the much smoother surface and smaller grains of the SA-MoO3 films to reduce the leakage currents, as shown by monitoring the surface morphology via atomic force microscopy and scanning electron microscopy. The work function and Mo 3d core level characteristics were determined via ultraviolet photoelectron spectroscopy and X-ray photoelectron spectroscopy. The e-MoO3 film offered better conductivity and hole injection ability; however, the increased device current may not enhance electroluminance proportionally. As a result, the efficiencies of SA-MoO3 devices were better than those of e-MoO3 devices.


  • Open Access

    Improvement in Device Performance and Reliability of Organic Light-Emitting Diodes through Deposition Rate Control

    by Shun-Wei Liu, Chih-Chien Lee, Yu-Ting Chung, Jiun-Haw Lee, Chin-Ti Chen, Juen-Kai Wang

    We demonstrated a fabrication technique to reduce the driving voltage, increase the current efficiency, and extend the operating lifetime of an organic light-emitting diode (OLED) by simply controlling the deposition rate of bis(10-hydroxybenzo[h]qinolinato) beryllium (Bebq2) used as the emitting layer and the electron-transport layer. In our optimized device, 55 nm of Bebq2was first deposited at a faster deposition rate of 1.3 nm/s, followed by the deposition of a thin Bebq2(5 nm) layer at a slower rate of 0.03 nm/s. The Bebq2layer with the faster deposition rate exhibited higher photoluminescence efficiency and was suitable for use in light emission. The thin Bebq2layer with the slower deposition rate was used to modify the interface between the Bebq2and cathode and hence improve the injection efficiency and lower the driving voltage. The operating lifetime of such a two-step deposition OLED was 1.92 and 4.6 times longer than that of devices with a single deposition rate, that is, 1.3 and 0.03 nm/s cases, respectively.

  • Comparison of thiophene- and selenophene-bridged donor–acceptor low band-gap copolymers used in bulk-heterojunction organic photovoltaics

    by Hung-Yang Chen, Shih-Chieh Yeh, Chin-Ti Chen, Chao-Tsen Chen

    We report a detailed comparison of absorption spectroscopy, electrochemistry, DFT calculations, field-effect charge mobility, as well as organic photovoltaic characteristics between thiophene- and selenophene-bridged donor–acceptor low-band-gap copolymers. In these copolymers, a significant reduction of the band-gap energy was observed for selenophene-bridged copolymers by UV-visible absorption spectroscopy and cyclic voltammetry. Field-effect charge mobility studies reveal that the enhanced hole mobility of the selenophene-bridged copolymers hinges on the solubilising alkyl side chain of the copolymers. Both cyclic voltammetry experiments and theoretical calculations showed that the decreased band-gap energy is mainly due to the lowering of the LUMO energy level, and the raising of the HOMO energy level is just a secondary cause. These results are reflected in a significant increase of the short circuit current density (JSC) but a slight decrease of the open circuit voltage (VOC) of their bulk-heterojunction organic photovoltaics (BHJ OPVs), of which the electron donor materials are a selenophene-bridged donor–acceptor copolymer: poly{9-dodecyl-9H-carbazole-alt-5,6-bis(dodecyloxy)-4,7-di(selenophen-2-yl) benzo[c][1,2,5]-thiadiazole} (pCzSe) or poly{4,8-bis(2-ethylhexyloxy)benzo[1,2-b;4,5-b′]dithiophene-alt-5,6-bis(dodecyloxy)-4,7-di(selenophen-2-yl)benzo[c][1,2,5]-thiadiazole} (pBDTSe), or a thiophene-bridged donor–acceptor copolymer: poly{9-dodecyl-9H-carbazole-alt-5,6-bis(dodecyloxy)-4,7-di(thiophen-2-yl)benzo[c][1,2,5]-thiadiazole} (pCzS) or poly{4,8-bis(2-ethylhexyloxy)benzo[1,2-b;4,5-b′]dithiophene-alt-5,6-bis(dodecyloxy)-4,7-di(thiophen-2-yl)benzo[c][1,2,5]-thiadiazole} (pBDTS); the electron acceptor material is [6,6]-phenyl-C61-butyric acid methyl ester (PCBM). Judging from our device data, the potential Se–Se interactions of the selenophene-bridged donor–acceptor copolymers, which is presumably beneficial for the fill factor (FF) of BHJ OPVs, is rather susceptible to the device fabrication conditions.


  • 4-Hydroxy-8-methyl-1,5-naphthyridine aluminium chelate: a morphologically stable and efficient exciton-blocking material for organic photovoltaics with prolonged lifetime

    by Shun-Wei Liu, Chih-Chien Lee, Chi-Feng Lin, Jia-Cing Huang, Chin-Ti Chen, Jiun-Haw Lee

    A stable exciton-blocking layer (EBL) with rigid ball-like 4-hydroxy-8-methyl-1,5-naphthyridine aluminium chelate (AlmND3) has been newly developed for organic photovoltaics (OPVs) based on a double-heterostructure of pentacene/C60/EBL. Unlike the common EBL materials, such as tris-(8-hydroxyquinoline)aluminium (Alq3) and bathocuproine (BCP), AlmND3 exhibits a relatively high electron mobility (∼10−4 cm2 V−1 s−1 at the electric field of 6.4 × 105 V cm−1) and a wide band gap energy (∼3.3 eV) in addition to a high glass transition temperature (Tg ∼ 194 °C). Having such EBL between active region (pentacene/C60) and the metal cathode, pristine device performances were comparable with those of BCP-based OPV due to its high mobility and wide band gap energy. Moreover, due to its significantly higher Tg than that of BCP, an extended lifetime performance was observed for AlmND3-based OPV, compared with the BCP-based OPV aged at the elevated temperature of 75 °C.


  • Top Cited Papers

    Highly Efficient Carbazole‐π‐Dimesitylborane Bipolar Fluorophores for Nondoped Blue Organic Light‐Emitting Diodes

    by Shin‐Lei Lin, Li‐Hsin Chan, Rong‐Ho Lee, Ming‐Yu Yen, Wen‐Jang Kuo, Chin‐Ti Chen, Ru‐Jong Jeng


  • Influence of Molecular Dipoles on the Photoluminescence and Electroluminescence of Dipolar Spirobifluorenes

    by C.‐L. Chiang, S.‐M. Tseng, C.‐T. Chen, C.‐P. Hsu, C.‐F. Shu

    This Full Paper investigates a series of strongly fluorescent donor–acceptor‐substituted spirobifluorene compounds, red 2‐diphenylamino‐7‐(2,2‐dicyanovinyl)‐9,9′‐spirobifluorene (DCV), green 2‐diphenylamino‐9,9′‐spirobifluorene7‐carxoxaldehyde (CHO), and blue 2‐diphenylamino‐7‐(2,2‐diphenylvinyl)‐9,9′‐spirobifluorene (DPV), together with their spiro‐linked “dimeric” analogs, 2DCV, 2,2′‐bis(diphenylamino)‐9,9′‐spirobifluorene‐7,7′‐dicarboxaldehyde (2CHO), and 2,2′‐bis(diphenylamino)‐7,7′‐bis(2,2‐diphenylvinyl)‐9,9′‐spirobifluorene (2DPV), respectively. The emission optical density and, hence, the intensity of photoluminescence (PL) or electroluminescence (EL) of the “dimeric” analogs is presumed to increase, which is beneficial for organic light‐emitting diode (OLED) applications. The physical properties, including the dipole moments obtained from quantum chemistry calculations, emission solvatochromism, fluorescence quantum yield (Φf) as well as the EL of these six spirobifluorene compounds have been examined in detail. We found that Φf as well as OLED performance (EL efficiency and intensity) of the strongly dipolar DCV decrease significantly in the “dimeric” analog 2DCV, but less so in the moderately dipolar CHO and 2CHO, and only slightly in the weakly dipolar DPV and 2DPV. This is parallel to the intramolecular dipole moment, which is large for 2DCV, medium for 2CHO, and very small for 2DPV. Here, we show for the first time systematically that the luminescence intensity is closely correlated with the local electric field induced by the molecular dipole. A strong electric field may facilitate radiationless decay channels with a charge‐transfer nature, leading to a high quenching rate. Consistent with this conclusion, which is derived from the red DCV/2DCV and green CHO/2CHO, our new blue fluorophore DPV with an essentially zero dipole moment has successfully achieved one of the best electrofluorescent blue OLEDs. At the same time, by doping the highly dipolar DCV into an isolated environment with the low‐polarity Alq3 as the host matrix, we obtained a very high performance of saturated yellow OLEDs as well, This is possibly due to the reduction of emission‐quenching dipoles from the neighboring molecules. Our results have provided an important insight in designing luminescent materials, as follows: molecular dipole moments should be kept at a low magnitude to avoid quenching induced by a strong local electric field in the chromophore.


  • Solid-state highly fluorescent diphenylaminospirobifluorenylfumaronitrile red emitters for non-doped organic light-emitting diodes

    by Yi-Ting Lee, Chih-Long Chiang, Chin-Ti Chen

    Bright (maximum 11 000 cd m–2 and 500 cd m–2 at 20 mA cm–2) and efficient (maximum external quantum efficiency of 3.1% at 1 mA cm–2) red (CIE, x = 0.66, y = 0.34) organic light-emitting diodes (OLEDs) employ arylaminospirobifluorene-substituted fumaronitriles as the novel non-dopant red emitter.


  • The Quest for High‐Performance Host Materials for Electrophosphorescent Blue Dopants

    by M.‐F. Wu, S.‐J. Yeh, C.‐T. Chen, H. Murayama, T. Tsuboi, W.‐S. Li, I. Chao, S.‐W. Liu, J.‐K. Wang

    We report a systematic comparison study of 3,5‐di(N‐carbazolyl)tetraphenylsilane (SimCP) and N,N′‐dicarbazolyl‐3,5‐benzene (mCP), which are used as the host materials for phosphorescent blue dopants in organic light‐emitting diodes (OLEDs). On the basis of photoexcitation emission spectroscopy, thermal stability analysis, photoelectron analysis, charge transport measurements, and molecular dynamics (MD) simulations, we conclude that the non‐π‐conjugated meta‐substituted triphenylsilyl moiety of SimCP exerts a unique hindering effect on the molecular packing characteristics in the condensed phase. The chemical origin of the superior performance of SimCP over mCP is revealed, and is expected to be helpful for the molecular design of effective host materials for enhancing the performance of blue phosphorescent OLEDs.