Anna Brovdi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Anna Brovdi has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Valentine Polishchuk
Uman National University, Uman, Ukraine
10 shared publications - D. V. Konovalov
Institute of Plant Physiology and Genetics of the National Academy of Sciences, Kyiv, Ukraine
4 shared publications - I. Mikolajko
Pavlo Tychyna Uman State Pedagogical University, 20300 Uman, Cherkasy region, Ukraine
4 shared publications - Anatolii Balabak
Uman National University, 20300 Uman, Ukraine
3 shared publications - Liliana Kunpan
Uman National University of Horticulture, Uman, Ukraine
3 shared publications - Olena Polishchuk
Uman National University of Horticulture
3 shared publications
Latest Publications
- Open Access
- 19 May 2026
- Published by The Bila Tserkva National Agrarian University in Agrobìologìâ
Analysis of lawns condition at Uman National University
Lawns occupy a significant share of urban green spaces and play an important sanitary and aesthetic role. Their durability and decorative value are ensured by the use of resilient grass species and well-balanced grass mixtures adapted to specific growing conditions. The study revealed that the most common ruderal plant species found on lawns of various functional types at Uman National University include common dandelion (Taraxacum officinale (L.) Weber ex F.H.Wigg.), ribwort plantain (Plantago lanceolata L.), shepherd’s purse (Capsella bursa-pastoris (L.) Medik.), broadleaf plantain (Plantago major L.), couch grass (Elymus repens (L.) Gould), common yarrow (Achillea millefolium L.), and green foxtail (Setaria viridis (L.) P. Beauv.). In particular, couch grass (Elymus repens (L.) Gould) causes significant damage to lawn stands. It was determined that the level of weed infestation of lawn areas within the university territory is predominantly moderate (3-4 points). Sports lawns were found to be the most heavily infested, where ruderal species occasionally displace cultivated grasses. The study also established that the grass stand structure of ornamental lawns is predominantly closed mosaic, whereas sports lawns exhibit separate-group and mosaic-group patterns, which is attributed to significant anthropogenic pressure. Shoot density in ornamental lawns ranged from 75 to 118 shoots per 100 cm², while in sports lawns it did not exceed 67 shoots per 100 cm². Based on a comprehensive quality assessment, the ornamental lawn located in the parterre area of the university was classified as high quality. In contrast, the quality of sports lawns was assessed as moderate to low, indicating the need for restoration. Key words: lawn cover, ornamental value, weed infestation, grass stand quality, grass stand closure pattern, projective cover.
- 19 May 2026
- Published by The Bila Tserkva National Agrarian University in Agrobìologìâ
Open AccessAnalysis of lawns condition at Uman National University
Lawns occupy a significant share of urban green spaces and play an important sanitary and aesthetic role. Their durability and decorative value are ensured by the use of resilient grass species and well-balanced grass mixtures adapted to specific growing conditions. The study revealed that the most common ruderal plant species found on lawns of various functional types at Uman National University include common dandelion (Taraxacum officinale (L.) Weber ex F.H.Wigg.), ribwort plantain (Plantago lanceolata L.), shepherd’s purse (Capsella bursa-pastoris (L.) Medik.), broadleaf plantain (Plantago major L.), couch grass (Elymus repens (L.) Gould), common yarrow (Achillea millefolium L.), and green foxtail (Setaria viridis (L.) P. Beauv.). In particular, couch grass (Elymus repens (L.) Gould) causes significant damage to lawn stands. It was determined that the level of weed infestation of lawn areas within the university territory is predominantly moderate (3-4 points). Sports lawns were found to be the most heavily infested, where ruderal species occasionally displace cultivated grasses. The study also established that the grass stand structure of ornamental lawns is predominantly closed mosaic, whereas sports lawns exhibit separate-group and mosaic-group patterns, which is attributed to significant anthropogenic pressure. Shoot density in ornamental lawns ranged from 75 to 118 shoots per 100 cm², while in sports lawns it did not exceed 67 shoots per 100 cm². Based on a comprehensive quality assessment, the ornamental lawn located in the parterre area of the university was classified as high quality. In contrast, the quality of sports lawns was assessed as moderate to low, indicating the need for restoration. Key words: lawn cover, ornamental value, weed infestation, grass stand quality, grass stand closure pattern, projective cover.
- Open Access
- 29 April 2026
- Published by Agricultural Academy in Bulgarian Journal of Agricultural Science
- Vol. 32 (2) , 299-305
Seed productivity of mustard depending on varietal characteristics and application of mineral fertilizers
The paper investigates the peculiarities of mustard seed yield and quality formation depending on the use of mineral fertilizers. It has been determined that the use of mineral fertilizers increase the yield structure, which contributed to the increase in the seed productivity of mustard. On average, seed yields increased significantly by 0.32–0.56 t/ha in the varieties with the application of mineral fertilizers, both as the main fertilizer and together with foliar fertilization, compared to the control without fertilizers. The introduction of phosphorus-potassium fertilizers in the main fertilizer provided a significant in the yield of mustard seeds of all varieties, which ranged from 0.14 t/ha (Tsarivna Pivnochi) to 0.27 t/ha (Oslava). With the main fertilizer and foliar feeding with nitrogen fertilizers, seed yields increased significantly compared to the control, and the addition of phosphorus-potassium fertilizers to the main fertilizer. The greatest influence on seed yield was the «fertilizer» factor, which accounted for 85.1%, while the influence of the «variety» factor was much lower. Thus, in order to increase the yield of mustard seeds when grown in the conditions of the Right-Bank Forest-Steppe, it is advisable to apply P45K45 as the main fertilizer, and to carry out two fertilizations with nitrogen fertilizers at a rate of N15 and in the rosette-stemming stage at a rate of N30, which ensures high seed productivity of mustard.
- 29 April 2026
- Published by Agricultural Academy in Bulgarian Journal of Agricultural Science
- Vol. 32 (2) , 299-305
Open AccessSeed productivity of mustard depending on varietal characteristics and application of mineral fertilizers
The paper investigates the peculiarities of mustard seed yield and quality formation depending on the use of mineral fertilizers. It has been determined that the use of mineral fertilizers increase the yield structure, which contributed to the increase in the seed productivity of mustard. On average, seed yields increased significantly by 0.32–0.56 t/ha in the varieties with the application of mineral fertilizers, both as the main fertilizer and together with foliar fertilization, compared to the control without fertilizers. The introduction of phosphorus-potassium fertilizers in the main fertilizer provided a significant in the yield of mustard seeds of all varieties, which ranged from 0.14 t/ha (Tsarivna Pivnochi) to 0.27 t/ha (Oslava). With the main fertilizer and foliar feeding with nitrogen fertilizers, seed yields increased significantly compared to the control, and the addition of phosphorus-potassium fertilizers to the main fertilizer. The greatest influence on seed yield was the «fertilizer» factor, which accounted for 85.1%, while the influence of the «variety» factor was much lower. Thus, in order to increase the yield of mustard seeds when grown in the conditions of the Right-Bank Forest-Steppe, it is advisable to apply P45K45 as the main fertilizer, and to carry out two fertilizations with nitrogen fertilizers at a rate of N15 and in the rosette-stemming stage at a rate of N30, which ensures high seed productivity of mustard.
- 25 December 2025
- Published by The Grassroots Institute in Grassroots Journal of Natural Resources
- Vol. 8 (3) , 225-241
Seasonal Rhythms of Floribunda Rose Development in Cultivation Conditions in the Right-Bank Forest-Steppe of Ukraine
Climate change continues to intensify globally and regionally, resulting in noticeable shifts in the phylogenetic and ontogenetic characteristics of plant growth and development. Accordingly, the study aimed to investigate the influence of abiotic factors on the growth and development characteristics of floribunda roses. Seasonal dynamics of floribunda rose development in the conditions of the Right-Bank Forest-Steppe of Ukraine were examined during 2021-2023 using standard methods. The relationship between decorative and morphometric traits was evaluated using the correlation coefficient (r). Statistical processing of the research results was carried out using dispersion and correlation analyses. Over three years (2021–2023), the vegetation period of the studied varieties typically began in the second or third ten-day period of March. For all varieties except ‘Minerva’, vegetation ended with the onset of frost. On average, floribunda roses exhibited a growing season of 245 days, with the longest period recorded for ‘Goldelse’ (250 days) and the shortest for ‘Minerva’ (217 days). The mean flowering duration was 124 days across the study years, with the longest flowering observed in ‘Pomponella’ (145 days) and the shortest in ‘Minerva’ (94 days). In 2022, flowering duration was shortest (120 days), likely due to increased temperatures and reduced precipitation during the active growth phase. In the same year, flowering breaks totaled 25 days. The results confirm the significant influence of climatic conditions, particularly air temperature and precipitation, on the duration and dynamics of floribunda rose flowering. A strong positive correlation was identified between flowering duration and both the average air temperature during the active growing season (r = 0.90) and the number of days exceeding 15°C (r = 0.84). Conversely, precipitation levels showed a strong negative correlation with the total duration of flowering breaks (r = –0.96). Thus, floribunda roses can be regarded as continuously flowering plants with a flowering period of up to 145 days, the intensity and dynamics of which depend on air temperature and precipitation. To increase flowering duration by reducing breaks, it is recommended to carry out additional irrigation and watering during dry periods. Also, given the global trends in climate change, the search for, creation, and study of drought-resistant rose genotypes is promising and may be a prospect for further research.
- 25 December 2025
- Published by The Grassroots Institute in Grassroots Journal of Natural Resources
- Vol. 8 (3) , 225-241
Seasonal Rhythms of Floribunda Rose Development in Cultivation Conditions in the Right-Bank Forest-Steppe of Ukraine
Climate change continues to intensify globally and regionally, resulting in noticeable shifts in the phylogenetic and ontogenetic characteristics of plant growth and development. Accordingly, the study aimed to investigate the influence of abiotic factors on the growth and development characteristics of floribunda roses. Seasonal dynamics of floribunda rose development in the conditions of the Right-Bank Forest-Steppe of Ukraine were examined during 2021-2023 using standard methods. The relationship between decorative and morphometric traits was evaluated using the correlation coefficient (r). Statistical processing of the research results was carried out using dispersion and correlation analyses. Over three years (2021–2023), the vegetation period of the studied varieties typically began in the second or third ten-day period of March. For all varieties except ‘Minerva’, vegetation ended with the onset of frost. On average, floribunda roses exhibited a growing season of 245 days, with the longest period recorded for ‘Goldelse’ (250 days) and the shortest for ‘Minerva’ (217 days). The mean flowering duration was 124 days across the study years, with the longest flowering observed in ‘Pomponella’ (145 days) and the shortest in ‘Minerva’ (94 days). In 2022, flowering duration was shortest (120 days), likely due to increased temperatures and reduced precipitation during the active growth phase. In the same year, flowering breaks totaled 25 days. The results confirm the significant influence of climatic conditions, particularly air temperature and precipitation, on the duration and dynamics of floribunda rose flowering. A strong positive correlation was identified between flowering duration and both the average air temperature during the active growing season (r = 0.90) and the number of days exceeding 15°C (r = 0.84). Conversely, precipitation levels showed a strong negative correlation with the total duration of flowering breaks (r = –0.96). Thus, floribunda roses can be regarded as continuously flowering plants with a flowering period of up to 145 days, the intensity and dynamics of which depend on air temperature and precipitation. To increase flowering duration by reducing breaks, it is recommended to carry out additional irrigation and watering during dry periods. Also, given the global trends in climate change, the search for, creation, and study of drought-resistant rose genotypes is promising and may be a prospect for further research.
- Open Access
- 27 November 2025
- Published by The Bila Tserkva National Agrarian University in Agrobìologìâ
Assessment of floribunda rose varieties' resistance to diseases and pests
Since ancient times, roses have been and remain one of the most popular plants for ornamental gardening. The variety of shapes, colors, and scents makes it an indispensable element of floral arrangements. One of the factors that significantly affects the decorative appeal of roses is plants damage by diseases and pests. Research has shown that the main diseases of floribunda roses that cause the most damage to their decorative qualities are black spot (Marssonina rosae (Lib.) Died.), powdery mildew (Sphaerotheca pannosa var. rosae Woron.), downy mildew (Pseudoperonospora sparsa (Berk.) Jacz.), and rose rust (Phragmidium distiflorum (Tode) Sames). It was determined that the Pomponella variety showed the highest resistance to disease pathogens. Plants of this variety were only occasionally affected by black spot, the intensity of which did not exceed 4 %. At the same time, the intensity of disease development in plants of the Goldelse variety reached 64 %, which led to premature leaf fall. Among the ten varieties of floribunda roses studied, only one variety, Carmagnola, was affected by rose rust. Signs of powdery mildew and downy mildew were also observed in only one variety, Arthur Bell, with disease development intensity of 25 % and 17 %, respectively. It has been determined that the main pests of roses are the rose sawfly (Arge rosae L.), green rose aphid (Macrosiphum rosae L.), common spider mite (Tetranychus urticae Koch), rose leaf roller (Archips rosana L.), thrips (Thrips spp.), and rose chafer beetle (Cetonia aurata L.). The green rose aphid and rose leaf roller were the most numerous and caused significant damage to plants. It has been determined that treating plants with insecticides is an effective way to protect roses from pests. The most effective preparations are the insecticides «Engio 247 SC» and «Aktara 25 WG», with a pest mortality rate of up to 97.8 %. Key words: roses, floribunda, pests, diseases, insecticide, decorativeness.
- 27 November 2025
- Published by The Bila Tserkva National Agrarian University in Agrobìologìâ
Open AccessAssessment of floribunda rose varieties' resistance to diseases and pests
Since ancient times, roses have been and remain one of the most popular plants for ornamental gardening. The variety of shapes, colors, and scents makes it an indispensable element of floral arrangements. One of the factors that significantly affects the decorative appeal of roses is plants damage by diseases and pests. Research has shown that the main diseases of floribunda roses that cause the most damage to their decorative qualities are black spot (Marssonina rosae (Lib.) Died.), powdery mildew (Sphaerotheca pannosa var. rosae Woron.), downy mildew (Pseudoperonospora sparsa (Berk.) Jacz.), and rose rust (Phragmidium distiflorum (Tode) Sames). It was determined that the Pomponella variety showed the highest resistance to disease pathogens. Plants of this variety were only occasionally affected by black spot, the intensity of which did not exceed 4 %. At the same time, the intensity of disease development in plants of the Goldelse variety reached 64 %, which led to premature leaf fall. Among the ten varieties of floribunda roses studied, only one variety, Carmagnola, was affected by rose rust. Signs of powdery mildew and downy mildew were also observed in only one variety, Arthur Bell, with disease development intensity of 25 % and 17 %, respectively. It has been determined that the main pests of roses are the rose sawfly (Arge rosae L.), green rose aphid (Macrosiphum rosae L.), common spider mite (Tetranychus urticae Koch), rose leaf roller (Archips rosana L.), thrips (Thrips spp.), and rose chafer beetle (Cetonia aurata L.). The green rose aphid and rose leaf roller were the most numerous and caused significant damage to plants. It has been determined that treating plants with insecticides is an effective way to protect roses from pests. The most effective preparations are the insecticides «Engio 247 SC» and «Aktara 25 WG», with a pest mortality rate of up to 97.8 %. Key words: roses, floribunda, pests, diseases, insecticide, decorativeness.
- Open Access
- 21 August 2025
- Published by The Grassroots Institute in Grassroots Journal of Natural Resources
- Vol. 8 (2) , 552-565
Cultivation Conditions and Varietal Features Influence Seed Yield and Quality of Switch Grass (Panicumv virgatum L.)
The goal of this study was to investigate the factors affecting the biological dormancy of seeds and to develop methods for reducing it. The study was conducted using the mid-late octaploid variety Cave-in-rock and the mid-season tetraploid variety Sunburst. Seed quality was determined using a method developed by the Institute of Bioenergy Crops and Sugar Beets. Switch grass (Panicum virgatum L.) seed yield depends on growing conditions and the location of seed formation on plants. The highest yield was obtained on the first tier of spikes and ranged from 0.47 to 1.67, depending on growing conditions. The highest seed yield was obtained in the Cave-in-rock variety in the conditions of the Western Forest-Steppe and ranged from 1.37 to 1.84 g/plant, depending on the panicle tier. It was determined that seed yield depended on the sum of active temperatures. Thus, with a decrease in the sum of active temperatures to 2910.1 °C, seed yield decreased to 0.41 g/plant. It was found that seed quality germination energy, germination, and weight of 1,000 switchgrass (Panicumv virgatum L.) seeds depended significantly on growing conditions, namely the placement of seeds in the Right-Bank and Left-Bank Forest Steppe of Ukraine and matrical diversity of the place of seed formation on plants. On average, by variety, the weight of 1,000 seeds on the first tier panicles was higher in all soil and climate zones of cultivation and ranged from 1.56 g/plant in the Left Bank Forest-Steppe to 1.77 g/plant in the Right Bank Forest-Steppe. Seed germination in the Western and Left-Bank Forest-Steppe was higher in the Sunburst variety and amounted to 78% and 35%, respectively, while in the Right-Bank Forest-Steppe it was higher in the Cave-in-rock variety – 33%.
- 21 August 2025
- Published by The Grassroots Institute in Grassroots Journal of Natural Resources
- Vol. 8 (2) , 552-565
Open AccessCultivation Conditions and Varietal Features Influence Seed Yield and Quality of Switch Grass (Panicumv virgatum L.)
The goal of this study was to investigate the factors affecting the biological dormancy of seeds and to develop methods for reducing it. The study was conducted using the mid-late octaploid variety Cave-in-rock and the mid-season tetraploid variety Sunburst. Seed quality was determined using a method developed by the Institute of Bioenergy Crops and Sugar Beets. Switch grass (Panicum virgatum L.) seed yield depends on growing conditions and the location of seed formation on plants. The highest yield was obtained on the first tier of spikes and ranged from 0.47 to 1.67, depending on growing conditions. The highest seed yield was obtained in the Cave-in-rock variety in the conditions of the Western Forest-Steppe and ranged from 1.37 to 1.84 g/plant, depending on the panicle tier. It was determined that seed yield depended on the sum of active temperatures. Thus, with a decrease in the sum of active temperatures to 2910.1 °C, seed yield decreased to 0.41 g/plant. It was found that seed quality germination energy, germination, and weight of 1,000 switchgrass (Panicumv virgatum L.) seeds depended significantly on growing conditions, namely the placement of seeds in the Right-Bank and Left-Bank Forest Steppe of Ukraine and matrical diversity of the place of seed formation on plants. On average, by variety, the weight of 1,000 seeds on the first tier panicles was higher in all soil and climate zones of cultivation and ranged from 1.56 g/plant in the Left Bank Forest-Steppe to 1.77 g/plant in the Right Bank Forest-Steppe. Seed germination in the Western and Left-Bank Forest-Steppe was higher in the Sunburst variety and amounted to 78% and 35%, respectively, while in the Right-Bank Forest-Steppe it was higher in the Cave-in-rock variety – 33%.
- Open Access
- 21 August 2025
- Published by The Grassroots Institute in Grassroots Journal of Natural Resources
- Vol. 8 (2) , 327-341
Mustard Productivity Depends on Varietal Characteristics and Elements of Cultivation Technology
An important reserve for increasing the productivity of crops, in particular mustard, is the widespread introduction of new varieties for various uses, as well as the potential for grain yield and quality. Therefore, the study aimed to identify the patterns of formation of yield and quality of mustard seeds depending on varietal characteristics and elements of technology. The research results showed that the yield of mustard seeds depended on the varietal characteristics and the timing of their harvesting. The use of phosphorus-potassium fertilizers and one-time foliar fertilization on the seedlings and twice on the seedlings and in the rosette-stem phase provided a significant increase in the yield of mustard seeds at all harvesting dates compared to the control. The increase in seed yield was statistically significant and depended on the timing of harvesting. The highest yields were recorded when harvesting 40 days after flowering, both in the control group and when applying the main fertilizer and foliar fertilization against the background of the main fertilizer. In addition to seed harvesting timing and the impact of mineral fertilizers, varietal characteristics played a significant role in determining seed yield. Higher seed yields were observed for white mustard varieties Pidpecheretska and Oslava at all harvesting dates, providing 1.25 t/ha and 2.03 t/ha, respectively, regardless of fertilizer use or in the control group without fertilizers. At the same time, the weight of 1000 seeds naturally and significantly increased depending on the timing of seed harvesting, both in the control and in the case of mineral fertilizers.
- 21 August 2025
- Published by The Grassroots Institute in Grassroots Journal of Natural Resources
- Vol. 8 (2) , 327-341
Open AccessMustard Productivity Depends on Varietal Characteristics and Elements of Cultivation Technology
An important reserve for increasing the productivity of crops, in particular mustard, is the widespread introduction of new varieties for various uses, as well as the potential for grain yield and quality. Therefore, the study aimed to identify the patterns of formation of yield and quality of mustard seeds depending on varietal characteristics and elements of technology. The research results showed that the yield of mustard seeds depended on the varietal characteristics and the timing of their harvesting. The use of phosphorus-potassium fertilizers and one-time foliar fertilization on the seedlings and twice on the seedlings and in the rosette-stem phase provided a significant increase in the yield of mustard seeds at all harvesting dates compared to the control. The increase in seed yield was statistically significant and depended on the timing of harvesting. The highest yields were recorded when harvesting 40 days after flowering, both in the control group and when applying the main fertilizer and foliar fertilization against the background of the main fertilizer. In addition to seed harvesting timing and the impact of mineral fertilizers, varietal characteristics played a significant role in determining seed yield. Higher seed yields were observed for white mustard varieties Pidpecheretska and Oslava at all harvesting dates, providing 1.25 t/ha and 2.03 t/ha, respectively, regardless of fertilizer use or in the control group without fertilizers. At the same time, the weight of 1000 seeds naturally and significantly increased depending on the timing of seed harvesting, both in the control and in the case of mineral fertilizers.
- 22 May 2025
- Published by The Bila Tserkva National Agrarian University in Agrobìologìâ
- No. 1(195)
Prospects for using floribunda roses in Uman city landscaping
Floriculture is a branch of ornamental gardening that studies the peculiarities of growing flower and ornamental plants, their reproduction and selection. Among the wide variety of flowers, the greatest attention is paid to roses, which are usually the main focus of anycomposition. Given the steady growth in demand for re-flowering roses, the study of the decorative properties of floribunda rose varieties is of great practical importance. The study of 20 varieties of floribunda roses in the city of Uman has determined that the most valuable in terms of all decorative and economic characteristics are roses of the Westpoint, Pomponella and Novalis varieties, with a score over 120. All other varieties have valuable individual characteristics, which makes them valuable material for ornamental gardening and floriculture. Harmoniously matched roses in terms of colour and shrub parameters allow you to create bright floral arrangements. Most often, floribunda roses are used for creating flower beds, group and solitary plantings, in flower arrays, parterre flower beds and mixborders. Low- and medium-sized roses with a compact bush and shieldshaped inflorescences with a small number of thorns are best suited for ridges creating: Arthur Bell, Westpoint, Santa Monika. For single plantings in the long term, vigorous bushes with beautiful foliage are suitable: Pomponella, Novalis. When creating flower plantations, special attention is paid to their colour, as it determines the harmony of the composition. Color richness and originality determines the value of ornamental gardening variety. The results of our research have shown that varieties with high resistance to adverse conditions have the best flowering power. In particular, these are the Pomponella, Lovely Green, Westpoint and Bella Rosa varieties, which proved to be the best in terms of the relevant traits in the research. That is why the creation of soliatary or group plantings using these varieties will allow to get highly decorative plantings throughout the spring and summer season. Key words: roses, floribunda, decorativeness, variety originality, landscaping.
- 22 May 2025
- Published by The Bila Tserkva National Agrarian University in Agrobìologìâ
- No. 1(195)
Prospects for using floribunda roses in Uman city landscaping
Floriculture is a branch of ornamental gardening that studies the peculiarities of growing flower and ornamental plants, their reproduction and selection. Among the wide variety of flowers, the greatest attention is paid to roses, which are usually the main focus of anycomposition. Given the steady growth in demand for re-flowering roses, the study of the decorative properties of floribunda rose varieties is of great practical importance. The study of 20 varieties of floribunda roses in the city of Uman has determined that the most valuable in terms of all decorative and economic characteristics are roses of the Westpoint, Pomponella and Novalis varieties, with a score over 120. All other varieties have valuable individual characteristics, which makes them valuable material for ornamental gardening and floriculture. Harmoniously matched roses in terms of colour and shrub parameters allow you to create bright floral arrangements. Most often, floribunda roses are used for creating flower beds, group and solitary plantings, in flower arrays, parterre flower beds and mixborders. Low- and medium-sized roses with a compact bush and shieldshaped inflorescences with a small number of thorns are best suited for ridges creating: Arthur Bell, Westpoint, Santa Monika. For single plantings in the long term, vigorous bushes with beautiful foliage are suitable: Pomponella, Novalis. When creating flower plantations, special attention is paid to their colour, as it determines the harmony of the composition. Color richness and originality determines the value of ornamental gardening variety. The results of our research have shown that varieties with high resistance to adverse conditions have the best flowering power. In particular, these are the Pomponella, Lovely Green, Westpoint and Bella Rosa varieties, which proved to be the best in terms of the relevant traits in the research. That is why the creation of soliatary or group plantings using these varieties will allow to get highly decorative plantings throughout the spring and summer season. Key words: roses, floribunda, decorativeness, variety originality, landscaping.
- Open Access
- 3 April 2025
- Published by The Grassroots Institute in Grassroots Journal of Natural Resources
- Vol. 8 (1) , 606-619
Yield and Quality of Mustard Seeds Depending on the Use of Technology Elements
Due to its versatile uses, mustard is a valuable crop that is widely used for industrial purposes. That is why the improvement of agrotechnical methods of its cultivation in order to obtain high yields is practical importance. The aim of the research was to investigate how the application of diverse factors, including timing, and methods of sowing, affect the yield and quality of mustard seed in the Right-Bank Forest-Steppe of Ukraine. According to the research results, it was found that the yield of mustard depends on the growth and development of plants and the formation of elements of the crop structure – the number of pods per plant, the number of seeds per pod and the weight of 1000 seeds. This article discusses results in plant height in correlation to sowing period and row spacing. It was found that the timing and methods of sowing mustard significantly affect the biometric parameters of the crop and, accordingly, the seed yield. According to the results it was determined that in the conditions of the Right-Bank Forest-Steppe of Ukraine, the optimal time for sowing mustard is the early sowing period, which falls on the first and second quarter of April. In order to increase the yield of mustard, it is recommended to grow it with a row spacing of 45 cm at both sowing dates.
- 3 April 2025
- Published by The Grassroots Institute in Grassroots Journal of Natural Resources
- Vol. 8 (1) , 606-619
Open AccessYield and Quality of Mustard Seeds Depending on the Use of Technology Elements
Due to its versatile uses, mustard is a valuable crop that is widely used for industrial purposes. That is why the improvement of agrotechnical methods of its cultivation in order to obtain high yields is practical importance. The aim of the research was to investigate how the application of diverse factors, including timing, and methods of sowing, affect the yield and quality of mustard seed in the Right-Bank Forest-Steppe of Ukraine. According to the research results, it was found that the yield of mustard depends on the growth and development of plants and the formation of elements of the crop structure – the number of pods per plant, the number of seeds per pod and the weight of 1000 seeds. This article discusses results in plant height in correlation to sowing period and row spacing. It was found that the timing and methods of sowing mustard significantly affect the biometric parameters of the crop and, accordingly, the seed yield. According to the results it was determined that in the conditions of the Right-Bank Forest-Steppe of Ukraine, the optimal time for sowing mustard is the early sowing period, which falls on the first and second quarter of April. In order to increase the yield of mustard, it is recommended to grow it with a row spacing of 45 cm at both sowing dates.
- Open Access
- 30 December 2024
- Published by The Grassroots Institute in Grassroots Journal of Natural Resources
- Vol. 7 (3) , 110-127
Formation of Elements of Yield Structure and Quality of Mustard Seeds Depending on Genotype and Mineral Nutrition
Given the steady increase in the Earth's temperature in the context of global climate change, which negatively affects the growth and development of most crops, the search for sustainable ecologically adapted plant species and ways to maintain their yields is of great practical importance. Mustard is one of the crops that can grow in drought conditions, which is driving demand for it. The article presents the results of studies of the peculiarities of the formation of the crop structure elements, yield and quality of mustard seeds depending on varietal characteristics and mineral nutrition. It was found that the application of phosphorus-potassium fertilizers, both main application and together with foliar fertilization with nitrogen fertilizers, provided a significant increase in the yield structure indicators – plant height in all phenological phases of mustard growth and development, the number of stems and pods per plant. The greatest increase in plant height of all varieties in phenological phases of growth and development, the number of stems and pods per plant was with the integrated use of phosphorus-potassium fertilizers as the main application and two-time foliar fertilization with nitrogen fertilizers. Indicators of the yield structure elements significantly depended on varietal characteristics. If in the rosette phase, the influence of the “fertiliser” factor was 71.0%, the “flowering” factor – 86.7%, and in the bud and ripening stages the influence of fertilizers was less and amounted to 47.2% and 38.3%, respectively, the influence of the “variety” factor was the greatest in the bud stage and amounted to 48.6% and in the ripening phase – 39.4%. The increase in yield structure indicators contributed to the improvement of mustard seed productivity - while on average, seed yield significantly increased with the use of mineral fertilizers compared to the control without fertilizers, then seed quality – germination energy and germination, when applying mineral fertilizers did not provide a sufficient increase in these indicators, they were at the level of control and only the weight of 1000 seeds significantly increased both depending on the genotype and the use of mineral fertilizers, which provided an increase in the yield of seeds of all varieties.
- 30 December 2024
- Published by The Grassroots Institute in Grassroots Journal of Natural Resources
- Vol. 7 (3) , 110-127
Open AccessFormation of Elements of Yield Structure and Quality of Mustard Seeds Depending on Genotype and Mineral Nutrition
Given the steady increase in the Earth's temperature in the context of global climate change, which negatively affects the growth and development of most crops, the search for sustainable ecologically adapted plant species and ways to maintain their yields is of great practical importance. Mustard is one of the crops that can grow in drought conditions, which is driving demand for it. The article presents the results of studies of the peculiarities of the formation of the crop structure elements, yield and quality of mustard seeds depending on varietal characteristics and mineral nutrition. It was found that the application of phosphorus-potassium fertilizers, both main application and together with foliar fertilization with nitrogen fertilizers, provided a significant increase in the yield structure indicators – plant height in all phenological phases of mustard growth and development, the number of stems and pods per plant. The greatest increase in plant height of all varieties in phenological phases of growth and development, the number of stems and pods per plant was with the integrated use of phosphorus-potassium fertilizers as the main application and two-time foliar fertilization with nitrogen fertilizers. Indicators of the yield structure elements significantly depended on varietal characteristics. If in the rosette phase, the influence of the “fertiliser” factor was 71.0%, the “flowering” factor – 86.7%, and in the bud and ripening stages the influence of fertilizers was less and amounted to 47.2% and 38.3%, respectively, the influence of the “variety” factor was the greatest in the bud stage and amounted to 48.6% and in the ripening phase – 39.4%. The increase in yield structure indicators contributed to the improvement of mustard seed productivity - while on average, seed yield significantly increased with the use of mineral fertilizers compared to the control without fertilizers, then seed quality – germination energy and germination, when applying mineral fertilizers did not provide a sufficient increase in these indicators, they were at the level of control and only the weight of 1000 seeds significantly increased both depending on the genotype and the use of mineral fertilizers, which provided an increase in the yield of seeds of all varieties.
- Open Access
- 30 December 2024
- Published by The Grassroots Institute in Grassroots Journal of Natural Resources
- Vol. 7 (3) , 22-38
Yield and Quality of Winter Wheat (Triticum aestivum L., 1753) Seeds Depending on Pre-Sowing Treatment of Seed with Biological Preparations
Intensive growth of the world's population, persistent climate change and food shortages are becoming major challenges of our time. For this reason, the use of intensive crop cultivation technologies to increase crop yields is a priority for the agricultural sector. The article describes the effect of pre-sowing treatment of seed with biostimulant Emistim C, micro fertiliser Avatar 1, and their combined use on the formation of yield and quality of winter wheat seeds under unstable moisture conditions. Pre-sowing treatment of seeds with biostimulant and micro fertiliser provided a significant increase in seed yield compared to the control. With the combined use of preparations for pre-sowing treatment of seed, the seed yield was significantly higher not only compared to the control but also compared to the treatment with each preparation separately. We performed a long-term study from 2018 to 2023, and obtained a similar dependence of seed yield on the pre-sowing treatment of the seed material, both separately and in combination with a biostimulant and micro fertiliser. During the study period, the seed yield was significantly higher under the pre-sowing treatment of seed with these preparations compared to the control. The highest yield of 5.8 t/ha was obtained with pre-sowing treatment in combination with a biostimulant and micro fertiliser, while in the control it was 5.1 t/ha. Pre-sowing treatment of the seed with a biostimulant or micro fertiliser had a positive effect on the yield of conditioned seeds. The yield of conditioned seeds was the highest under the combined treatment of seed with these preparations and amounted to 78%, or 6% higher than the control. It was found that pre-sowing treatment of the seed with a biostimulant and micro fertiliser significantly increased seed quality germination energy, germination rate and weight of 1000 seeds. The obtained results of the study indicate the feasibility of pre-sowing seed treatment with a biostimulant and micro fertiliser to increase the yield and quality of winter wheat seeds, as well as the effectiveness of their combined use in growing crops under conditions of insufficient moisture.
- 30 December 2024
- Published by The Grassroots Institute in Grassroots Journal of Natural Resources
- Vol. 7 (3) , 22-38
Open AccessYield and Quality of Winter Wheat (Triticum aestivum L., 1753) Seeds Depending on Pre-Sowing Treatment of Seed with Biological Preparations
Intensive growth of the world's population, persistent climate change and food shortages are becoming major challenges of our time. For this reason, the use of intensive crop cultivation technologies to increase crop yields is a priority for the agricultural sector. The article describes the effect of pre-sowing treatment of seed with biostimulant Emistim C, micro fertiliser Avatar 1, and their combined use on the formation of yield and quality of winter wheat seeds under unstable moisture conditions. Pre-sowing treatment of seeds with biostimulant and micro fertiliser provided a significant increase in seed yield compared to the control. With the combined use of preparations for pre-sowing treatment of seed, the seed yield was significantly higher not only compared to the control but also compared to the treatment with each preparation separately. We performed a long-term study from 2018 to 2023, and obtained a similar dependence of seed yield on the pre-sowing treatment of the seed material, both separately and in combination with a biostimulant and micro fertiliser. During the study period, the seed yield was significantly higher under the pre-sowing treatment of seed with these preparations compared to the control. The highest yield of 5.8 t/ha was obtained with pre-sowing treatment in combination with a biostimulant and micro fertiliser, while in the control it was 5.1 t/ha. Pre-sowing treatment of the seed with a biostimulant or micro fertiliser had a positive effect on the yield of conditioned seeds. The yield of conditioned seeds was the highest under the combined treatment of seed with these preparations and amounted to 78%, or 6% higher than the control. It was found that pre-sowing treatment of the seed with a biostimulant and micro fertiliser significantly increased seed quality germination energy, germination rate and weight of 1000 seeds. The obtained results of the study indicate the feasibility of pre-sowing seed treatment with a biostimulant and micro fertiliser to increase the yield and quality of winter wheat seeds, as well as the effectiveness of their combined use in growing crops under conditions of insufficient moisture.