SZShuai Zhang

Shuai Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shuai Zhang has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Theoretical study on bubble dynamics of an underwater vacuum seismic source

    by Yanqing Li, Shuai Zhang, Jing Ma, Bingxiang Liu, A-Man Zhang

    This study presents a physical model of bubble pulsation for a vacuum seismic source designed for deep-sea resource exploration. A comprehensive review of the published literature reveals that systematic theoretical analyses of vacuum seismic sources remain extremely limited to date. The vacuum seismic source investigated in this paper is a novel seismic exploration technology. By exploiting the energy difference between the deep-sea ambient environment and the internal state of the vacuum source, a deep-sea cavity is generated, producing high-energy pressure waves suitable for deep-water exploration. In this work, bubble pulsation models for both the conventional air gun and the vacuum seismic source are established, and a comparative analysis is conducted to elucidate the fundamental differences between these two types of seismic sources. The operating mechanism of the vacuum seismic source is thereby revealed. Furthermore, the influences of initial cavity volume, initial pressure, and excitation depth on how the vacuum seismic source performs are systematically investigated. The results provide critical theoretical foundations for improving the quality of exploration pressure waves generated by vacuum seismic sources and for optimizing their spectral characteristics and offer essential theoretical support for the transition from a conceptual vacuum source model to the development of a prototype system.


  • A damping approach for enhancing low-frequency signatures from large-scale airgun bubbles

    by Yu-Zhou Pang, A-Man Zhang, Shuai Zhang, Shi-Ping Wang

    As the demand for deep-sea resource exploration continues to grow, the optimization of low-frequency performance has become a critical objective in the design and control of marine airgun sources. A damping screen, installed at the outlet of a large-scale airgun, was investigated as a method to shift the dominant frequency of the acoustic signal toward lower frequencies. Based on a validated numerical model of compressible airgun bubble dynamics, a systematic analysis was conducted to assess the impact of the damping screen’s geometric dimensions on bubble dynamic characteristics, the airgun’s pressure wavelet, and its sound pressure level spectrum. The damping screen effectively regulated the airgun’s performance by actively intervening in and reshaping the dynamic behavior of the bubble. A principal finding was that the damping screen successfully lowered the dominant frequency of the airgun, revealing a predictable, regulatory relationship between the screen’s dimensions and the source’s dominant frequency. Furthermore, the influence patterns of the damping screen’s dimensions on other key performance indicators, including the characteristics of the primary pulse, as well as the strength and period of the bubble pulse, were determined. A damping screen, therefore, shows promise as a novel approach for achieving targeted modulation of the dominant frequency in airgun source signatures.


  • Bubble formed by underwater rapid high-pressure gas jet near the free surface and the induced water mound

    by S. Zhang, A. P. Sun, S. P. Wang, S. W. Wang, T. Li

    This study numerically investigates how geometric parameters influence bubbles generated by underwater high-pressure gas jets and the resultant free-surface water mounds. Comparing rigid jetting devices with different aspect ratios and pre-cracked casings with varied initial geometries, we held initial bubble volume, internal pressure, free-surface distance, and buoyancy parameter constant. Using the Finite Volume Method, we simulated the full bubble pulsation cycle (i.e., expansion, collapse, and secondary expansion), analyzed the evolution of phase fraction and flow-field pressure, and quantitatively characterized bubble morphology and mound dynamics. Results show that a higher aspect ratio shortens the pulsation period, significantly increases mound height, narrows mound width, and reduces mound mass. Among geometries, conical bubbles most significantly enhance mound height due to efficient axial energy-focusing; cylindrical ones are intermediate; inverted cones are lower due to dispersed focusing; and spheres are nearly isotropic. For a given aspect ratio, conical bubbles are optimal for maximizing mound height, with a critical water skirt height occurring within a specific aspect ratio range. This work provides valuable references for designing and optimizing underwater high-pressure gas jetting devices.

  • Numerical investigation on bubble dynamics and pressure wavelet characteristics of the four-opening seismic airgun

    by Si-Wei Wang, Li-Lei Zhan, Shi-Ping Wang, Shuai Zhang, Yan-Hui Ai

    The seismic sources generated by airguns have long been used for the marine resources and seabed geological exploration. This work investigates seismic bubble dynamics and pressure wavelet features using detailed numerical simulations of full-scale, four-port airguns within the OpenFOAM framework. The Navier–Stokes equations are spatially discretized via the finite volume method, with the volume of fluid method employed to capture the evolving bubble interface. Gas emission from the ports initially creates four separate bubbles, which subsequently merge into a single, larger bubble. Some flow details including coalescence features of the bubbles and mass throttling of the opening port are discussed. Meanwhile, it is observed that the coherent interaction induced by the four expanding bubbles can suppress the initial pressure wavelet attenuation, which might provide an innovative way to optimize the performance of the single four-opening airgun. In addition, the results from our studies on airguns with different configurations indicate that the airgun parameters including firing pressure, opening size and form, airgun volume are primary to the pressure wavelet characteristics, though some minor details outside the airgun wall can slightly affect the bubble evolution.


  • Open Access

    Removing Ice from Frozen Structures Using Bubble Pulsation Energy

    by Ying Song, Shuai Zhang, Shiping Wang, Zhuang Kang

    Icing poses significant threats to the safety and reliability of structures in cold regions, thus prompting researchers to explore deicing methods. This paper establishes a bubble deicing system and investigates the utilization of bubble pulsation energy for removing ice from frozen structures. Traditional deicing methods suffer from issues such as high energy consumption, severe environmental pollution, and secondary icing. To address these challenges and advance the development of deicing technology, harnessing the substantial energy generated by bubble pulsation can be employed for effective deicing purposes. Through experimental analysis, this study successfully demonstrates the feasibility of employing cavitation for deicing applications. Several experimental cases are conducted to elucidate the mechanism behind bubble-energy-based deicing, varying parameters including the distance between bubbles and targets as well as ice sheet thickness within a range of 5~35 mm. The findings indicate that bubbles can effectively facilitate deicing processes. Further exploration is required to fully understand the potential of bubble deicing technology and its prospects in engineering applications.


  • Open Access

    Study on the pressure wave characteristics of bubbles in low frequency, high pressure, and large capacity air guns

    by Yi-Chi Ning, Shuai Zhang, Yong-Cheng Qiu, Yi Liu, Shuai Li, A-Man Zhang

    随着海洋勘探逐渐向深海发展,大容量低频气枪的研究变得更加重要,降低探测波高频能量、提高低频能量成为气枪设计中亟待解决的核心问题。本文基于气泡动力学统一方程建立了大尺度低频气枪气泡动力学模型,该模型考虑了大尺度气枪气泡的迁移现象,通过模型对比证明了该模型的预测结果与真实大尺度低频气枪气泡的运动规律更加接近。本文基于该模型研究了气枪容积、工作压力、沉放深度及自由液面虚反射系数对气枪气泡迁移及压力子波等特性的影响。此外,深海勘探多使用气枪阵列增强探测压力波的能量,本文开展了不同间距和排列方式的双枪、三枪及四枪的压力子波特性研究。本文旨为新型大容量低频单枪枪体设计以及多枪组阵设计提供参考。


  • Open Access

    An Exploratory Study on the Potentials of Removing Ice from Frozen Structures by Bubble Pulsation Energy

    by Ying Song, Shuai Zhang, Shi-Ping Wang, Zhuang Kang

    The safety and reliability of structures operating in cold regions are seriously threatened by icing. This has attracted researchers to explore de-icing/anti-icing methods. In this work, a bubble de-icing system was established and investigated for the removal of ice from frozen structures using bubble pulsation energy. Traditional de-icing method face high energy consumption, environmental pollution, and secondary icing issues. To avoid this and promote the development of de-icing techniques, the massive amount of energy generated by bubble pulsation can be used for de-icing. In the present work, experimental methods have been adopted to demonstrate the possibilities of de-icing using cavitation energy. Many test cases, in which the bubble distance from the target and thickness of ice layer were varied 5 - 35 mm, were examined to determine the mechanism of ice removal by the bubble energy. This research demonstrated that bubble energy can be used effectively for de-icing. Bubble energy should be further explored for de-icing techniques and engineering application prospects.