Aaron N. Fancher
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Aaron N. Fancher has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
Alexei L. Bogdanov
New Non-Volatile Memory Research, Western Digital 2 , San Jose, California 95119
2 shared publications- Joyeeta Nag
Non-Volatile Memory Research, Western Digital 2 , San Jose, California 95119
2 shared publications - Kartik Sondhi
Silicon Technology & Manufacturing, Western Digital 1 , Milpitas, California 95035
2 shared publications - Mark D. Kraman
Sandisk Technologies, Inc., Milpitas, USA
2 shared publications - Rahul Sharangpani
Silicon Technology & Manufacturing, Western Digital 1 , Milpitas, California 95035
2 shared publications - Roshan J. Tirukkonda
Silicon Technology & Manufacturing, Western Digital 1 , Milpitas, California 95035
2 shared publications
Latest Publications
- Open Access
- 15 November 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 41 (6)
Understanding 3D anisotropic reactive ion etching of oxide-metal stacks
Scaling semiconductor devices necessitates the fabrication of high-aspect-ratio narrow features through the precise etching of multiple layers comprising alternating materials, each with sub-20 nm thickness. However, etching dissimilar materials, such as alternating metal and oxide layers, pose significant challenges due to inherent discrepancies in vertical and lateral etch rates. This study demonstrates the feasibility of etching a stack comprising 10 layers of silicon dioxide (SiO2) and molybdenum (Mo) using an Oxford Instruments ICP RIE tool operating at a low power regime (bias < 250 V). We evaluated different etch chemistries, including Cl2/CHF3 and CF4/CHF3, and the role of CH4 as a passivation gas to control the lateral etch rates. Mask encapsulation with Ru was employed to protect the hardmask during the etching process, enabling successful etching of 10 layers without lateral recess. Experimental results were validated using Sentaurus™ TCAD software to investigate the impact of gas chemistry on the stack etch rate. Our findings provide valuable insights into the performance of various etch chemistries, demonstrating the effectiveness of the evaluated chemistries and the role of CH4 in improving profile characteristics. The integration of experimental and computational approaches facilitates the optimization of process parameters for advanced integrated circuit fabrication.
- 15 November 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 41 (6)
Open AccessUnderstanding 3D anisotropic reactive ion etching of oxide-metal stacks
Scaling semiconductor devices necessitates the fabrication of high-aspect-ratio narrow features through the precise etching of multiple layers comprising alternating materials, each with sub-20 nm thickness. However, etching dissimilar materials, such as alternating metal and oxide layers, pose significant challenges due to inherent discrepancies in vertical and lateral etch rates. This study demonstrates the feasibility of etching a stack comprising 10 layers of silicon dioxide (SiO2) and molybdenum (Mo) using an Oxford Instruments ICP RIE tool operating at a low power regime (bias < 250 V). We evaluated different etch chemistries, including Cl2/CHF3 and CF4/CHF3, and the role of CH4 as a passivation gas to control the lateral etch rates. Mask encapsulation with Ru was employed to protect the hardmask during the etching process, enabling successful etching of 10 layers without lateral recess. Experimental results were validated using Sentaurus™ TCAD software to investigate the impact of gas chemistry on the stack etch rate. Our findings provide valuable insights into the performance of various etch chemistries, demonstrating the effectiveness of the evaluated chemistries and the role of CH4 in improving profile characteristics. The integration of experimental and computational approaches facilitates the optimization of process parameters for advanced integrated circuit fabrication.
- Open Access
- 8 June 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 41 (4)
Hardmask engineering by mask encapsulation for enabling next generation reactive ion etch scaling
Miniaturization and scaling of semiconductor devices require development of innovative techniques to sustain advancements. A promising trend is the migration from 2D to 3D device architectures that necessitate fabrication of high-aspect-ratio narrow features through layers of different materials. Reactive ion etching can achieve this but poses unique challenges due to the requirement of etch chemistries capable of etching dissimilar materials with varying etch rates while maintaining high productivity. The choice of hardmask is also crucial, as it plays a critical role in determining efficacy of the etch process and the final shape of the feature being etched. To address these challenges, we introduce a new concept of hardmask engineering that involves a bilayer hardmask scheme consisting of a patterned conventional hardmask encapsulated with a thin layer of etch-resistant ruthenium (Ru) layer. Experimental results for etching multilayer stacks consisting of alternating pairs of SiO2 and Mo show that this engineered hardmask results in improved hardmask remaining and etch profile with smaller critical dimensions (CDs). Technology computer-aided design simulations with the Ru encapsulation layer on conventional carbon hardmask demonstrate increased poly-Si etch depth with reduced bow CD. This concept can be extended to any semiconductor nanofabrication step involving high-aspect-ratio etching where precise control of CDs is essential in the vertical direction.
- 8 June 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 41 (4)
Open AccessHardmask engineering by mask encapsulation for enabling next generation reactive ion etch scaling
Miniaturization and scaling of semiconductor devices require development of innovative techniques to sustain advancements. A promising trend is the migration from 2D to 3D device architectures that necessitate fabrication of high-aspect-ratio narrow features through layers of different materials. Reactive ion etching can achieve this but poses unique challenges due to the requirement of etch chemistries capable of etching dissimilar materials with varying etch rates while maintaining high productivity. The choice of hardmask is also crucial, as it plays a critical role in determining efficacy of the etch process and the final shape of the feature being etched. To address these challenges, we introduce a new concept of hardmask engineering that involves a bilayer hardmask scheme consisting of a patterned conventional hardmask encapsulated with a thin layer of etch-resistant ruthenium (Ru) layer. Experimental results for etching multilayer stacks consisting of alternating pairs of SiO2 and Mo show that this engineered hardmask results in improved hardmask remaining and etch profile with smaller critical dimensions (CDs). Technology computer-aided design simulations with the Ru encapsulation layer on conventional carbon hardmask demonstrate increased poly-Si etch depth with reduced bow CD. This concept can be extended to any semiconductor nanofabrication step involving high-aspect-ratio etching where precise control of CDs is essential in the vertical direction.